X-Git-Url: http://cloudbase.mooo.com/gitweb/irmp.git/blobdiff_plain/b85cb27dc97335aac5a98eacfefdb6119ad8312e..e97defc02a9df11a1ab8575b6b572587ef033449:/irmpconfig.h diff --git a/irmpconfig.h b/irmpconfig.h index 8e274c3..3767de7 100644 --- a/irmpconfig.h +++ b/irmpconfig.h @@ -3,11 +3,10 @@ * * DO NOT INCLUDE THIS FILE, WILL BE INCLUDED BY IRMP.H! * - * Copyright (c) 2009-2013 Frank Meyer - frank(at)fli4l.de + * Copyright (c) 2009-2016 Frank Meyer - frank(at)fli4l.de + * Extensions for PIC 12F1820 W.Strobl 2014-07-20 * - * $Id: irmpconfig.h,v 1.99 2013/03/19 15:11:55 fm Exp $ - * - * ATMEGA88 @ 8 MHz + * $Id: irmpconfig.h,v 1.152 2017/02/17 09:13:06 fm Exp $ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -27,6 +26,7 @@ * Change F_INTERRUPTS if you change the number of interrupts per second, * Normally, F_INTERRUPTS should be in the range from 10000 to 15000, typical is 15000 * A value above 15000 costs additional program space, absolute maximum value is 20000. + * On PIC with XC8/C18 Compiler, use 15151 as the correct value. *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #ifndef F_INTERRUPTS @@ -52,17 +52,17 @@ // typical protocols, disable here! Enable Remarks F_INTERRUPTS Program Space #define IRMP_SUPPORT_SIRCS_PROTOCOL 1 // Sony SIRCS >= 10000 ~150 bytes #define IRMP_SUPPORT_NEC_PROTOCOL 1 // NEC + APPLE >= 10000 ~300 bytes -#define IRMP_SUPPORT_SAMSUNG_PROTOCOL 1 // Samsung + Samsung32 >= 10000 ~300 bytes -#define IRMP_SUPPORT_MATSUSHITA_PROTOCOL 1 // Matsushita >= 10000 ~50 bytes +#define IRMP_SUPPORT_SAMSUNG_PROTOCOL 1 // Samsung + Samsg32 >= 10000 ~300 bytes #define IRMP_SUPPORT_KASEIKYO_PROTOCOL 1 // Kaseikyo >= 10000 ~250 bytes -#define IRMP_SUPPORT_DENON_PROTOCOL 1 // DENON, Sharp >= 10000 ~250 bytes // more protocols, enable here! Enable Remarks F_INTERRUPTS Program Space -#define IRMP_SUPPORT_RC5_PROTOCOL 0 // RC5 >= 10000 ~250 bytes -#define IRMP_SUPPORT_RC6_PROTOCOL 0 // RC6 & RC6A >= 10000 ~250 bytes #define IRMP_SUPPORT_JVC_PROTOCOL 0 // JVC >= 10000 ~150 bytes #define IRMP_SUPPORT_NEC16_PROTOCOL 0 // NEC16 >= 10000 ~100 bytes #define IRMP_SUPPORT_NEC42_PROTOCOL 0 // NEC42 >= 10000 ~300 bytes +#define IRMP_SUPPORT_MATSUSHITA_PROTOCOL 0 // Matsushita >= 10000 ~50 bytes +#define IRMP_SUPPORT_DENON_PROTOCOL 0 // DENON, Sharp >= 10000 ~250 bytes +#define IRMP_SUPPORT_RC5_PROTOCOL 0 // RC5 >= 10000 ~250 bytes +#define IRMP_SUPPORT_RC6_PROTOCOL 0 // RC6 & RC6A >= 10000 ~250 bytes #define IRMP_SUPPORT_IR60_PROTOCOL 0 // IR60 (SDA2008) >= 10000 ~300 bytes #define IRMP_SUPPORT_GRUNDIG_PROTOCOL 0 // Grundig >= 10000 ~300 bytes #define IRMP_SUPPORT_SIEMENS_PROTOCOL 0 // Siemens Gigaset >= 15000 ~550 bytes @@ -72,6 +72,8 @@ #define IRMP_SUPPORT_BOSE_PROTOCOL 0 // BOSE >= 10000 ~150 bytes #define IRMP_SUPPORT_KATHREIN_PROTOCOL 0 // Kathrein >= 10000 ~200 bytes #define IRMP_SUPPORT_NUBERT_PROTOCOL 0 // NUBERT >= 10000 ~50 bytes +#define IRMP_SUPPORT_FAN_PROTOCOL 0 // FAN (ventilator) >= 10000 ~50 bytes +#define IRMP_SUPPORT_SPEAKER_PROTOCOL 0 // SPEAKER (~NUBERT) >= 10000 ~50 bytes #define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL 0 // Bang & Olufsen >= 10000 ~200 bytes #define IRMP_SUPPORT_RECS80_PROTOCOL 0 // RECS80 (SAA3004) >= 15000 ~50 bytes #define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0 // RECS80EXT (SAA3008) >= 15000 ~50 bytes @@ -82,40 +84,65 @@ #define IRMP_SUPPORT_TELEFUNKEN_PROTOCOL 0 // Telefunken 1560 >= 10000 ~150 bytes #define IRMP_SUPPORT_FDC_PROTOCOL 0 // FDC3402 keyboard >= 10000 (better 15000) ~150 bytes (~400 in combination with RC5) #define IRMP_SUPPORT_RCCAR_PROTOCOL 0 // RC Car >= 10000 (better 15000) ~150 bytes (~500 in combination with RC5) +#define IRMP_SUPPORT_ROOMBA_PROTOCOL 0 // iRobot Roomba >= 10000 ~150 bytes #define IRMP_SUPPORT_RUWIDO_PROTOCOL 0 // RUWIDO, T-Home >= 15000 ~550 bytes #define IRMP_SUPPORT_A1TVBOX_PROTOCOL 0 // A1 TV BOX >= 15000 (better 20000) ~300 bytes #define IRMP_SUPPORT_LEGO_PROTOCOL 0 // LEGO Power RC >= 20000 ~150 bytes - +#define IRMP_SUPPORT_RCMM_PROTOCOL 0 // RCMM 12,24, or 32 >= 20000 ~150 bytes +#define IRMP_SUPPORT_LGAIR_PROTOCOL 0 // LG Air Condition >= 10000 ~300 bytes +#define IRMP_SUPPORT_SAMSUNG48_PROTOCOL 0 // Samsung48 >= 10000 ~100 bytes (SAMSUNG must be enabled!) +#define IRMP_SUPPORT_MERLIN_PROTOCOL 0 // Merlin >= 15000 (better 20000) ~300 bytes +#define IRMP_SUPPORT_PENTAX_PROTOCOL 0 // Pentax >= 10000 ~150 bytes +#define IRMP_SUPPORT_S100_PROTOCOL 0 // S100 >= 10000 ~250 bytes +#define IRMP_SUPPORT_ACP24_PROTOCOL 0 // ACP24 >= 10000 ~250 bytes +#define IRMP_SUPPORT_TECHNICS_PROTOCOL 0 // TECHNICS >= 10000 ~250 bytes +#define IRMP_SUPPORT_PANASONIC_PROTOCOL 0 // PANASONIC Beamer >= 10000 ~250 bytes +#define IRMP_SUPPORT_MITSU_HEAVY_PROTOCOL 0 // Mitsubishi Aircond >= 10000 ~250 bytes +#define IRMP_SUPPORT_VINCENT_PROTOCOL 0 // VINCENT >= 10000 ~250 bytes +#define IRMP_SUPPORT_SAMSUNGAH_PROTOCOL 1 // SAMSUNG AH >= 10000 ~250 bytes +#define IRMP_SUPPORT_RADIO1_PROTOCOL 0 // RADIO, e.g. TEVION >= 10000 ~250 bytes (experimental) /*--------------------------------------------------------------------------------------------------------------------------------------------------- - * Change hardware pin here for ATMEL AVR + * Change hardware pin here for ATMEL ATMega/ATTiny/XMega *--------------------------------------------------------------------------------------------------------------------------------------------------- */ -#if defined (ATMEL_AVR) // use PB6 as IR input on AVR +#if defined (ATMEL_AVR) || defined (__AVR_XMEGA__) // use PB6 as IR input on AVR # define IRMP_PORT_LETTER B # define IRMP_BIT_NUMBER 6 /*--------------------------------------------------------------------------------------------------------------------------------------------------- - * Change hardware pin here for PIC C18 compiler + * Change hardware pin here for PIC C18 or XC8 compiler *--------------------------------------------------------------------------------------------------------------------------------------------------- */ -#elif defined (PIC_C18) // use RB4 as IR input on PIC -# define IRMP_PIN PORTBbits.RB4 +#elif defined (PIC_C18) // use RB4 as IR input on PIC (C18 or XC8 compiler) +# if defined(__12F1840) +# define IRMP_PIN RA5 // on 12F1840 with XC8 compiler +# else +# define IRMP_PIN PORTBbits.RB4 // PIC C18 +# endif /*--------------------------------------------------------------------------------------------------------------------------------------------------- * Change hardware pin here for PIC CCS compiler *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #elif defined (PIC_CCS) -# define IRMP_PIN PIN_B4 // use PB4 as IR input on PIC +# define IRMP_PIN PIN_B4 // use PB4 as IR input on PIC (CCS compiler) /*--------------------------------------------------------------------------------------------------------------------------------------------------- * Change hardware pin here for ARM STM32 *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #elif defined (ARM_STM32) // use C13 as IR input on STM32 -# define IRMP_PORT_LETTER C -# define IRMP_BIT_NUMBER 13 +# define IRMP_PORT_LETTER B +# define IRMP_BIT_NUMBER 4 + +/*--------------------------------------------------------------------------------------------------------------------------------------------------- + * Change hardware pin here for ARM STM32 with libopencm3 + *--------------------------------------------------------------------------------------------------------------------------------------------------- + */ +#elif defined (LIBOPENCM3) +# define IRMP_PORT_LETTER B +# define IRMP_BIT_NUMBER 4 /*--------------------------------------------------------------------------------------------------------------------------------------------------- * Change hardware pin here for Stellaris ARM Cortex M4 @@ -125,6 +152,36 @@ # define IRMP_PORT_LETTER B # define IRMP_BIT_NUMBER 4 +/*--------------------------------------------------------------------------------------------------------------------------------------------------- + * Change hardware pin here for STM8 + *--------------------------------------------------------------------------------------------------------------------------------------------------- + */ +#elif defined (SDCC_STM8) // use PA1 as IR input on STM8 +# define IRMP_PORT_LETTER A +# define IRMP_BIT_NUMBER 1 + +/*--------------------------------------------------------------------------------------------------------------------------------------------------- + * Change hardware pin here for ESP8266 + *--------------------------------------------------------------------------------------------------------------------------------------------------- + */ +#elif defined (__xtensa__) +# define IRMP_BIT_NUMBER 12 // use GPIO12 (Pin 7 UEXT) on ESP8266-EVB evaluation board + +/*--------------------------------------------------------------------------------------------------------------------------------------------------- + * Change hardware pin here for Teensy 3.x with teensyduino gcc compiler + *--------------------------------------------------------------------------------------------------------------------------------------------------- + */ +#elif defined (TEENSY_ARM_CORTEX_M4) +# define IRMP_PIN 1 // use Digital pin 1 as IR input on Teensy + +/*--------------------------------------------------------------------------------------------------------------------------------------------------- + * Change hardware pin here for MBED + *--------------------------------------------------------------------------------------------------------------------------------------------------- + */ +#elif defined(__MBED__) +# define IRMP_PIN P0_22 // use P1_27 on LPC1347 +# define IRMP_PINMODE PullUp // hardware dependent + /*--------------------------------------------------------------------------------------------------------------------------------------------------- * Handling of unknown target system: DON'T CHANGE *--------------------------------------------------------------------------------------------------------------------------------------------------- @@ -166,4 +223,4 @@ # define IRMP_USE_CALLBACK 0 // 1: use callbacks. 0: do not. default is 0 #endif -#endif /* _WC_IRMPCONFIG_H_ */ +#endif // _IRMPCONFIG_H_