X-Git-Url: http://cloudbase.mooo.com/gitweb/irmp.git/blobdiff_plain/d823e85206be5f5e483d8f682f9b7c79edf2c7d6..2ac088b274ff067eae9e5e391c9b3fddb5929624:/irmpconfig.h diff --git a/irmpconfig.h b/irmpconfig.h index 6244c94..48ab0ec 100644 --- a/irmpconfig.h +++ b/irmpconfig.h @@ -1,9 +1,11 @@ /*--------------------------------------------------------------------------------------------------------------------------------------------------- * irmpconfig.h * - * Copyright (c) 2010 Frank Meyer - frank(at)fli4l.de + * DO NOT INCLUDE THIS FILE, WILL BE INCLUDED BY IRMP.H! * - * $Id: irmpconfig.h,v 1.28 2010/06/22 15:41:38 fm Exp $ + * Copyright (c) 2009-2013 Frank Meyer - frank(at)fli4l.de + * + * $Id: irmpconfig.h,v 1.98 2013/01/17 07:33:13 fm Exp $ * * ATMEGA88 @ 8 MHz * @@ -17,14 +19,18 @@ #ifndef _IRMPCONFIG_H_ #define _IRMPCONFIG_H_ +#ifndef _IRMP_H_ +# error please include only irmp.h, not irmpconfig.h +#endif + /*--------------------------------------------------------------------------------------------------------------------------------------------------- * Change F_INTERRUPTS if you change the number of interrupts per second, - * Normally, F_INTERRUPTS should be in the range from 10000 to 15000. - * A value above 15000 costs additional program space, absolut maximum value is 20000. + * Normally, F_INTERRUPTS should be in the range from 10000 to 15000, typical is 15000 + * A value above 15000 costs additional program space, absolute maximum value is 20000. *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #ifndef F_INTERRUPTS -#define F_INTERRUPTS 10000 // interrupts per second, min: 10000, max: 15000 +# define F_INTERRUPTS 15000 // interrupts per second, min: 10000, max: 20000, typ: 15000 #endif /*--------------------------------------------------------------------------------------------------------------------------------------------------- @@ -34,78 +40,128 @@ * 1 enable decoder * 0 disable decoder * + * The standard decoders are enabled per default. + * Less common protocols are disabled here, you need to enable them manually. + * * If you want to use FDC or RCCAR simultaneous with RC5 protocol, additional program space is required. * If you don't need RC5 when using FDC/RCCAR, you should disable RC5. + * You cannot enable both DENON and RUWIDO, only enable one of them. *--------------------------------------------------------------------------------------------------------------------------------------------------- */ -// Standard protocols: default is enabled. Change to 0 to save program space: +// typical protocols, disable here! Enable Remarks F_INTERRUPTS Program Space +#define IRMP_SUPPORT_SIRCS_PROTOCOL 1 // Sony SIRCS >= 10000 ~150 bytes +#define IRMP_SUPPORT_NEC_PROTOCOL 1 // NEC + APPLE >= 10000 ~300 bytes +#define IRMP_SUPPORT_SAMSUNG_PROTOCOL 1 // Samsung + Samsung32 >= 10000 ~300 bytes +#define IRMP_SUPPORT_MATSUSHITA_PROTOCOL 1 // Matsushita >= 10000 ~50 bytes +#define IRMP_SUPPORT_KASEIKYO_PROTOCOL 1 // Kaseikyo >= 10000 ~250 bytes +#define IRMP_SUPPORT_DENON_PROTOCOL 1 // DENON, Sharp >= 10000 ~250 bytes + +// more protocols, enable here! Enable Remarks F_INTERRUPTS Program Space +#define IRMP_SUPPORT_RC5_PROTOCOL 0 // RC5 >= 10000 ~250 bytes +#define IRMP_SUPPORT_RC6_PROTOCOL 0 // RC6 & RC6A >= 10000 ~250 bytes +#define IRMP_SUPPORT_JVC_PROTOCOL 0 // JVC >= 10000 ~150 bytes +#define IRMP_SUPPORT_NEC16_PROTOCOL 0 // NEC16 >= 10000 ~100 bytes +#define IRMP_SUPPORT_NEC42_PROTOCOL 0 // NEC42 >= 10000 ~300 bytes +#define IRMP_SUPPORT_IR60_PROTOCOL 0 // IR60 (SDA2008) >= 10000 ~300 bytes +#define IRMP_SUPPORT_GRUNDIG_PROTOCOL 0 // Grundig >= 10000 ~300 bytes +#define IRMP_SUPPORT_SIEMENS_PROTOCOL 0 // Siemens Gigaset >= 15000 ~550 bytes +#define IRMP_SUPPORT_NOKIA_PROTOCOL 0 // Nokia >= 10000 ~300 bytes + +// exotic protocols, enable here! Enable Remarks F_INTERRUPTS Program Space +#define IRMP_SUPPORT_BOSE_PROTOCOL 0 // BOSE >= 10000 ~150 bytes +#define IRMP_SUPPORT_KATHREIN_PROTOCOL 0 // Kathrein >= 10000 ~200 bytes +#define IRMP_SUPPORT_NUBERT_PROTOCOL 0 // NUBERT >= 10000 ~50 bytes +#define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL 0 // Bang & Olufsen >= 10000 ~200 bytes +#define IRMP_SUPPORT_RECS80_PROTOCOL 0 // RECS80 (SAA3004) >= 15000 ~50 bytes +#define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0 // RECS80EXT (SAA3008) >= 15000 ~50 bytes +#define IRMP_SUPPORT_THOMSON_PROTOCOL 0 // Thomson >= 10000 ~250 bytes +#define IRMP_SUPPORT_NIKON_PROTOCOL 0 // NIKON camera >= 10000 ~250 bytes +#define IRMP_SUPPORT_NETBOX_PROTOCOL 0 // Netbox keyboard >= 10000 ~400 bytes (PROTOTYPE!) +#define IRMP_SUPPORT_FDC_PROTOCOL 0 // FDC3402 keyboard >= 10000 (better 15000) ~150 bytes (~400 in combination with RC5) +#define IRMP_SUPPORT_RCCAR_PROTOCOL 0 // RC Car >= 10000 (better 15000) ~150 bytes (~500 in combination with RC5) +#define IRMP_SUPPORT_RUWIDO_PROTOCOL 0 // RUWIDO, T-Home >= 15000 ~550 bytes +#define IRMP_SUPPORT_A1TVBOX_PROTOCOL 0 // A1 TV BOX >= 15000 (better 20000) ~300 bytes +#define IRMP_SUPPORT_LEGO_PROTOCOL 0 // LEGO Power RC >= 20000 ~150 bytes -#define IRMP_SUPPORT_SIRCS_PROTOCOL 1 // flag: support Sony SIRCS uses ~100 bytes -#define IRMP_SUPPORT_NEC_PROTOCOL 1 // flag: support NEC + APPLE uses ~250 bytes -#define IRMP_SUPPORT_SAMSUNG_PROTOCOL 1 // flag: support Samsung + Samsung32 uses ~250 bytes -#define IRMP_SUPPORT_MATSUSHITA_PROTOCOL 1 // flag: support Matsushita uses ~50 bytes -#define IRMP_SUPPORT_KASEIKYO_PROTOCOL 1 // flag: support Kaseikyo uses ~50 bytes -#define IRMP_SUPPORT_DENON_PROTOCOL 1 // flag: support DENON uses ~250 bytes +/*--------------------------------------------------------------------------------------------------------------------------------------------------- + * Change hardware pin here for ATMEL AVR + *--------------------------------------------------------------------------------------------------------------------------------------------------- + */ +#if defined (ATMEL_AVR) // use PB6 as IR input on AVR +# define IRMP_PORT_LETTER B +# define IRMP_BIT_NUMBER 6 -// Non-standard protocols: default is disabled. Change to 1 to enable decoder: - -#define IRMP_SUPPORT_RC5_PROTOCOL 0 // flag: support RC5 uses ~250 bytes -#define IRMP_SUPPORT_RC6_PROTOCOL 0 // flag: support RC6 uses ~200 bytes -#define IRMP_SUPPORT_GRUNDIG_PROTOCOL 0 // flag: support Grundig uses ~150 bytes -#define IRMP_SUPPORT_NOKIA_PROTOCOL 0 // flag: support Nokia uses ~150 bytes -#define IRMP_SUPPORT_NUBERT_PROTOCOL 0 // flag: support NUBERT uses ~50 bytes -#define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL 0 // flag: support Bang & Olufsen uses ~200 bytes -#define IRMP_SUPPORT_FDC_PROTOCOL 0 // flag: support FDC3402 keyboard uses ~50/400 bytes -#define IRMP_SUPPORT_RCCAR_PROTOCOL 0 // flag: support RC car uses ~150/500 bytes +/*--------------------------------------------------------------------------------------------------------------------------------------------------- + * Change hardware pin here for PIC C18 compiler + *--------------------------------------------------------------------------------------------------------------------------------------------------- + */ +#elif defined (PIC_C18) // use RB4 as IR input on PIC +# define IRMP_PIN PORTBbits.RB4 /*--------------------------------------------------------------------------------------------------------------------------------------------------- - * THE FOLLOWING DECODERS WORK ONLY FOR F_INTERRUPTS >= 14500! + * Change hardware pin here for PIC CCS compiler *--------------------------------------------------------------------------------------------------------------------------------------------------- */ -#if F_INTERRUPTS >= 14500 -#define IRMP_SUPPORT_SIEMENS_PROTOCOL 0 // flag: support Siemens Gigaset uses ~150 bytes -#else -#define IRMP_SUPPORT_SIEMENS_PROTOCOL 0 // DO NOT CHANGE! F_INTERRUPTS too low! -#endif +#elif defined (PIC_CCS) +# define IRMP_PIN PIN_B4 // use PB4 as IR input on PIC /*--------------------------------------------------------------------------------------------------------------------------------------------------- - * THE FOLLOWING DECODERS WORK ONLY FOR F_INTERRUPTS >= 20000! + * Change hardware pin here for ARM STM32 *--------------------------------------------------------------------------------------------------------------------------------------------------- */ -#if F_INTERRUPTS >= 20000 -#define IRMP_SUPPORT_RECS80_PROTOCOL 0 // flag: support RECS80 uses ~50 bytes -#define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0 // flag: support RECS80EXT uses ~50 bytes -#else -#define IRMP_SUPPORT_RECS80_PROTOCOL 0 // DO NOT CHANGE! F_INTERRUPTS too low! -#define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0 // DO NOT CHANGE! F_INTERRUPTS too low! -#endif +#elif defined (ARM_STM32) // use C13 as IR input on STM32 +# define IRMP_PORT_LETTER C +# define IRMP_BIT_NUMBER 13 /*--------------------------------------------------------------------------------------------------------------------------------------------------- - * Change hardware pin here: + * Change hardware pin here for Stellaris ARM Cortex M4 *--------------------------------------------------------------------------------------------------------------------------------------------------- */ -#ifdef PIC_CCS_COMPILER // PIC CCS Compiler: +#elif defined (STELLARIS_ARM_CORTEX_M4) // use B4 as IR input on Stellaris LM4F +# define IRMP_PORT_LETTER B +# define IRMP_BIT_NUMBER 4 -#define IRMP_PIN PIN_B4 // use PB4 as IR input on PIC +/*--------------------------------------------------------------------------------------------------------------------------------------------------- + * Handling of unknown target system: DON'T CHANGE + *--------------------------------------------------------------------------------------------------------------------------------------------------- + */ +#elif !defined (UNIX_OR_WINDOWS) +# error target system not defined. +#endif -#else // AVR: +/*--------------------------------------------------------------------------------------------------------------------------------------------------- + * Set IRMP_LOGGING to 1 if want to log data to UART with 9600Bd + *--------------------------------------------------------------------------------------------------------------------------------------------------- + */ +#ifndef IRMP_LOGGING +# define IRMP_LOGGING 0 // 1: log IR signal (scan), 0: do not. default is 0 +#endif -#define IRMP_PORT PORTB -#define IRMP_DDR DDRB -#define IRMP_PIN PINB -#define IRMP_BIT 6 // use PB6 as IR input on AVR +/*--------------------------------------------------------------------------------------------------------------------------------------------------- + * Use external logging routines + * If you enable external logging, you have also to enable IRMP_LOGGING above + *--------------------------------------------------------------------------------------------------------------------------------------------------- + */ +#ifndef IRMP_EXT_LOGGING +# define IRMP_EXT_LOGGING 0 // 1: use external logging, 0: do not. default is 0 +#endif -#define input(x) ((x) & (1 << IRMP_BIT)) +/*--------------------------------------------------------------------------------------------------------------------------------------------------- + * Set IRMP_PROTOCOL_NAMES to 1 if want to access protocol names (for logging etc), costs ~300 bytes RAM! + *--------------------------------------------------------------------------------------------------------------------------------------------------- + */ +#ifndef IRMP_PROTOCOL_NAMES +# define IRMP_PROTOCOL_NAMES 0 // 1: access protocol names, 0: do not. default is 0 #endif /*--------------------------------------------------------------------------------------------------------------------------------------------------- - * Set IRMP_LOGGING to 1 if want to log data to UART with 9600Bd + * Use Callbacks to indicate input signal *--------------------------------------------------------------------------------------------------------------------------------------------------- */ -#ifndef IRMP_LOGGING -#define IRMP_LOGGING 0 // 1: log IR signal (scan), 0: do not (default) +#ifndef IRMP_USE_CALLBACK +# define IRMP_USE_CALLBACK 0 // 1: use callbacks. 0: do not. default is 0 #endif #endif /* _WC_IRMPCONFIG_H_ */