X-Git-Url: http://cloudbase.mooo.com/gitweb/irmp.git/blobdiff_plain/eaaf80c3a29b0c4bcc2040b8202152e8c0b675f0..f60c464437d9976037876933079a7a2e1792bfb8:/irmpconfig.h diff --git a/irmpconfig.h b/irmpconfig.h index 7fadb90..2eeeab9 100644 --- a/irmpconfig.h +++ b/irmpconfig.h @@ -1,9 +1,9 @@ /*--------------------------------------------------------------------------------------------------------------------------------------------------- * irmpconfig.h * - * Copyright (c) 2010 Frank Meyer - frank(at)fli4l.de + * Copyright (c) 2009-2011 Frank Meyer - frank(at)fli4l.de * - * $Id: irmpconfig.h,v 1.13 2010/06/10 21:24:50 fm Exp $ + * $Id: irmpconfig.h,v 1.81 2012/02/24 11:40:41 fm Exp $ * * ATMEGA88 @ 8 MHz * @@ -18,64 +18,80 @@ #define _IRMPCONFIG_H_ /*--------------------------------------------------------------------------------------------------------------------------------------------------- - * Change F_INTERRUPTS if you change the number of interrupts per second, F_INTERRUPTS should be in the range from 10000 to 15000 + * Change F_INTERRUPTS if you change the number of interrupts per second, + * Normally, F_INTERRUPTS should be in the range from 10000 to 15000, typical is 15000 + * A value above 15000 costs additional program space, absolute maximum value is 20000. *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #ifndef F_INTERRUPTS -#define F_INTERRUPTS 10000 // interrupts per second, min: 10000, max: 15000 +#define F_INTERRUPTS 15000 // interrupts per second, min: 10000, max: 20000, typ: 15000 #endif /*--------------------------------------------------------------------------------------------------------------------------------------------------- * Change settings from 1 to 0 if you want to disable one or more decoders. * This saves program space. + * * 1 enable decoder * 0 disable decoder + * + * The standard decoders are enabled per default. + * Less common protocols are disabled here, you need to enable them manually. + * + * If you want to use FDC or RCCAR simultaneous with RC5 protocol, additional program space is required. + * If you don't need RC5 when using FDC/RCCAR, you should disable RC5. *--------------------------------------------------------------------------------------------------------------------------------------------------- */ -#define IRMP_SUPPORT_SIRCS_PROTOCOL 1 // flag: support SIRCS uses ~100 bytes -#define IRMP_SUPPORT_NEC_PROTOCOL 1 // flag: support NEC + APPLE uses ~250 bytes -#define IRMP_SUPPORT_SAMSUNG_PROTOCOL 1 // flag: support Samsung + Samsung32 uses ~250 bytes -#define IRMP_SUPPORT_MATSUSHITA_PROTOCOL 1 // flag: support Matsushita uses ~50 bytes -#define IRMP_SUPPORT_KASEIKYO_PROTOCOL 1 // flag: support Kaseikyo uses ~50 bytes -#define IRMP_SUPPORT_RECS80_PROTOCOL 1 // flag: support RECS80 uses ~50 bytes -#define IRMP_SUPPORT_RC5_PROTOCOL 1 // flag: support RC5 uses ~250 bytes -#define IRMP_SUPPORT_DENON_PROTOCOL 1 // flag: support DENON uses ~250 bytes -#define IRMP_SUPPORT_RC6_PROTOCOL 1 // flag: support RC6 uses ~200 bytes -#define IRMP_SUPPORT_RECS80EXT_PROTOCOL 1 // flag: support RECS80EXT uses ~50 bytes -#define IRMP_SUPPORT_NUBERT_PROTOCOL 1 // flag: support NUBERT uses ~50 bytes -#define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL 1 // flag: support Bang & Olufsen uses ~200 bytes -#define IRMP_SUPPORT_GRUNDIG_PROTOCOL 1 // flag: support Grundig uses ~150 bytes -#define IRMP_SUPPORT_NOKIA_PROTOCOL 1 // flag: support Nokia uses ~150 bytes -/*--------------------------------------------------------------------------------------------------------------------------------------------------- - * THE FOLLOWING DECODERS WORK ONLY FOR F_INTERRUPTS > 14500! - *--------------------------------------------------------------------------------------------------------------------------------------------------- - */ -#if F_INTERRUPTS >= 14500 -#define IRMP_SUPPORT_SIEMENS_PROTOCOL 1 // flag: support Siemens Gigaset uses ~150 bytes -#define IRMP_SUPPORT_FDC1_PROTOCOL 1 // flag: support FDC1 keyboard uses ~150 bytes -#define IRMP_SUPPORT_FDC2_PROTOCOL 1 // flag: support FDC2 keyboard uses ~150 bytes -#else -#define IRMP_SUPPORT_SIEMENS_PROTOCOL 0 // DO NOT CHANGE! F_INTERRUPTS too low! -#define IRMP_SUPPORT_FDC1_PROTOCOL 0 // DO NOT CHANGE! F_INTERRUPTS too low! -#define IRMP_SUPPORT_FDC2_PROTOCOL 0 // DO NOT CHANGE! F_INTERRUPTS too low! -#endif +// typical protocols, disable here! Enable Remarks F_INTERRUPTS Program Space +#define IRMP_SUPPORT_SIRCS_PROTOCOL 1 // Sony SIRCS >= 10000 ~150 bytes +#define IRMP_SUPPORT_NEC_PROTOCOL 1 // NEC + APPLE >= 10000 ~300 bytes +#define IRMP_SUPPORT_SAMSUNG_PROTOCOL 1 // Samsung + Samsung32 >= 10000 ~300 bytes +#define IRMP_SUPPORT_MATSUSHITA_PROTOCOL 1 // Matsushita >= 10000 ~50 bytes +#define IRMP_SUPPORT_KASEIKYO_PROTOCOL 1 // Kaseikyo >= 10000 ~250 bytes +#define IRMP_SUPPORT_DENON_PROTOCOL 1 // DENON, Sharp >= 10000 ~250 bytes + +// more protocols, enable here! Enable Remarks F_INTERRUPTS Program Space +#define IRMP_SUPPORT_RC5_PROTOCOL 0 // RC5 >= 10000 ~250 bytes +#define IRMP_SUPPORT_RC6_PROTOCOL 0 // RC6 & RC6A >= 10000 ~250 bytes +#define IRMP_SUPPORT_JVC_PROTOCOL 0 // JVC >= 10000 ~150 bytes +#define IRMP_SUPPORT_NEC16_PROTOCOL 0 // NEC16 >= 10000 ~100 bytes +#define IRMP_SUPPORT_NEC42_PROTOCOL 0 // NEC42 >= 10000 ~300 bytes +#define IRMP_SUPPORT_IR60_PROTOCOL 0 // IR60 (SAB2008) >= 10000 ~300 bytes +#define IRMP_SUPPORT_GRUNDIG_PROTOCOL 0 // Grundig >= 10000 ~300 bytes +#define IRMP_SUPPORT_SIEMENS_PROTOCOL 0 // Siemens Gigaset >= 15000 ~550 bytes +#define IRMP_SUPPORT_NOKIA_PROTOCOL 0 // Nokia >= 10000 ~300 bytes + +// exotic protocols, enable here! Enable Remarks F_INTERRUPTS Program Space +#define IRMP_SUPPORT_KATHREIN_PROTOCOL 0 // Kathrein >= 10000 ~200 bytes +#define IRMP_SUPPORT_NUBERT_PROTOCOL 0 // NUBERT >= 10000 ~50 bytes +#define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL 0 // Bang & Olufsen >= 10000 ~200 bytes +#define IRMP_SUPPORT_RECS80_PROTOCOL 0 // RECS80 (SAA3004) >= 15000 ~50 bytes +#define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0 // RECS80EXT (SAA3008) >= 15000 ~50 bytes +#define IRMP_SUPPORT_THOMSON_PROTOCOL 0 // Thomson >= 10000 ~250 bytes +#define IRMP_SUPPORT_NIKON_PROTOCOL 0 // NIKON camera >= 10000 ~250 bytes +#define IRMP_SUPPORT_NETBOX_PROTOCOL 0 // Netbox keyboard >= 10000 ~400 bytes (PROTOTYPE!) +#define IRMP_SUPPORT_FDC_PROTOCOL 0 // FDC3402 keyboard >= 10000 (better 15000) ~150 bytes (~400 in combination with RC5) +#define IRMP_SUPPORT_RCCAR_PROTOCOL 0 // RC Car >= 10000 (better 15000) ~150 bytes (~500 in combination with RC5) +#define IRMP_SUPPORT_RUWIDO_PROTOCOL 0 // RUWIDO, T-Home >= 15000 ~550 bytes +#define IRMP_SUPPORT_LEGO_PROTOCOL 0 // LEGO Power RC >= 20000 ~150 bytes /*--------------------------------------------------------------------------------------------------------------------------------------------------- * Change hardware pin here: *--------------------------------------------------------------------------------------------------------------------------------------------------- */ -#ifdef PIC_CCS_COMPILER // PIC CCS Compiler: +#if defined (PIC_C18) // Microchip C18 Compiler +#include // main PIC18 h file +#define IRMP_PIN PORTBbits.RB4 // use RB4 as IR input on PIC +#define input(x) (x) -#define IRMP_PIN PIN_B4 // use PB4 as IR input on PIC - -#else // AVR: +#elif defined (PIC_CCS_COMPILER) // PIC CCS Compiler: +#define IRMP_PIN PIN_B4 // use PB4 as IR input on PIC +#else // AVR: #define IRMP_PORT PORTB #define IRMP_DDR DDRB #define IRMP_PIN PINB -#define IRMP_BIT 6 // use PB6 as IR input on AVR - +#define IRMP_BIT 6 // use PB6 as IR input on AVR #define input(x) ((x) & (1 << IRMP_BIT)) #endif @@ -87,4 +103,81 @@ #define IRMP_LOGGING 0 // 1: log IR signal (scan), 0: do not (default) #endif +/*--------------------------------------------------------------------------------------------------------------------------------------------------- + * Use external logging routines + * If you enable external logging, you have also to enable IRMP_LOGGING above + *--------------------------------------------------------------------------------------------------------------------------------------------------- + */ +#ifndef IRMP_EXT_LOGGING +#define IRMP_EXT_LOGGING 0 // 1:log, 0: do not log ; +#endif + +/*--------------------------------------------------------------------------------------------------------------------------------------------------- + * Set IRMP_PROTOCOL_NAMES to 1 if want to access protocol names (for logging etc), costs ~300 bytes RAM! + *--------------------------------------------------------------------------------------------------------------------------------------------------- + */ +#define IRMP_PROTOCOL_NAMES 0 // 1: access protocol names, 0: do not (default), + +/*--------------------------------------------------------------------------------------------------------------------------------------------------- + * Use Callbacks to indicate input signal + *--------------------------------------------------------------------------------------------------------------------------------------------------- + */ +#define IRMP_USE_CALLBACK 0 // flag: 0 = don't use callbacks, 1 = use callbacks, default is 0 + +/*--------------------------------------------------------------------------------------------------------------------------------------------------- + * DO NOT CHANGE THE FOLLOWING LINES ! + *--------------------------------------------------------------------------------------------------------------------------------------------------- + */ +#if IRMP_SUPPORT_SIEMENS_PROTOCOL == 1 && F_INTERRUPTS < 15000 +# warning F_INTERRUPTS too low, SIEMENS protocol disabled (should be at least 15000) +# undef IRMP_SUPPORT_SIEMENS_PROTOCOL +# define IRMP_SUPPORT_SIEMENS_PROTOCOL 0 +#endif + +#if IRMP_SUPPORT_RUWIDO_PROTOCOL == 1 && F_INTERRUPTS < 15000 +# warning F_INTERRUPTS too low, RUWIDO protocol disabled (should be at least 15000) +# undef IRMP_SUPPORT_RUWIDO_PROTOCOL +# define IRMP_SUPPORT_RUWIDO_PROTOCOL 0 +#endif + +#if IRMP_SUPPORT_RECS80_PROTOCOL == 1 && F_INTERRUPTS < 15000 +# warning F_INTERRUPTS too low, RECS80 protocol disabled (should be at least 15000) +# undef IRMP_SUPPORT_RECS80_PROTOCOL +# define IRMP_SUPPORT_RECS80_PROTOCOL 0 +#endif + +#if IRMP_SUPPORT_RECS80EXT_PROTOCOL == 1 && F_INTERRUPTS < 15000 +# warning F_INTERRUPTS too low, RECS80EXT protocol disabled (should be at least 15000) +# undef IRMP_SUPPORT_RECS80EXT_PROTOCOL +# define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0 +#endif + +#if IRMP_SUPPORT_LEGO_PROTOCOL == 1 && F_INTERRUPTS < 20000 +# warning F_INTERRUPTS too low, LEGO protocol disabled (should be at least 20000) +# undef IRMP_SUPPORT_LEGO_PROTOCOL +# define IRMP_SUPPORT_LEGO_PROTOCOL 0 +#endif + +#if IRMP_SUPPORT_JVC_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0 +# warning JVC protocol needs also NEC protocol, NEC protocol enabled +# undef IRMP_SUPPORT_NEC_PROTOCOL +# define IRMP_SUPPORT_NEC_PROTOCOL 1 +#endif + +#if IRMP_SUPPORT_NEC16_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0 +# warning NEC16 protocol needs also NEC protocol, NEC protocol enabled +# undef IRMP_SUPPORT_NEC_PROTOCOL +# define IRMP_SUPPORT_NEC_PROTOCOL 1 +#endif + +#if IRMP_SUPPORT_NEC42_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0 +# warning NEC42 protocol needs also NEC protocol, NEC protocol enabled +# undef IRMP_SUPPORT_NEC_PROTOCOL +# define IRMP_SUPPORT_NEC_PROTOCOL 1 +#endif + +#if F_INTERRUPTS > 20000 +#error F_INTERRUPTS too high (should be not greater than 20000) +#endif + #endif /* _WC_IRMPCONFIG_H_ */