From: ukw <ukw@aeb2e35e-bfc4-4214-b83c-9e8de998ed28>
Date: Tue, 17 Nov 2015 14:25:45 +0000 (+0000)
Subject: Version 2.9.7: added port to to ESP8266 and TEENSY, added PANASONIC protocol, added... 
X-Git-Tag: irmp-libopencm3-pre-1~20
X-Git-Url: http://cloudbase.mooo.com/gitweb/irmp.git/commitdiff_plain/cc052a2ddc81f1a839435ed6be99d97e00c689e9

Version 2.9.7: added port to to ESP8266 and TEENSY, added PANASONIC protocol, added BOSE support for IRSND

git-svn-id: svn://mikrocontroller.net/irmp@169 aeb2e35e-bfc4-4214-b83c-9e8de998ed28
---

diff --git a/examples/Arduino.ino b/examples/Arduino.ino
new file mode 100644
index 0000000..3738b19
--- /dev/null
+++ b/examples/Arduino.ino
@@ -0,0 +1,161 @@
++#include <TimerOne.h>
+/* first include Arduino.h, the IDE includes it after irmp*.h ... */
+#include "Arduino.h"
+/* ... and then chokes on uintX_t ... */
+
+#include <irmp.h>
+#include <irsnd.h>
+
+/* undefine this if you don't want blinking LED for diagnosis */
+#define LED_PIN 13
+#define SER_BAUD 115200
+
+/* F_INTERRUPTS is the interrupt frequency defined in irmpconfig.h */
+#define US (1000000 / F_INTERRUPTS)
+void setup()
+{
+    Serial.begin(SER_BAUD);
+    delay(1000);
+    /* greeting string and debugging ouput */
+    Serial.println("IRMP test sketch");
+    Serial.print("US: ");
+    Serial.println(US);
+    Serial.println("Send example: P:02 A:916E C:000F (NEC Taste 1)");
+#ifdef LED_PIN
+    pinMode(LED_PIN, OUTPUT);
+#endif
+    irmp_init();
+    irsnd_init();
+    //sei();
+    led(HIGH);
+    delay(20); /* make sure the greeting string is out before starting */
+    led(LOW);
+    Timer1.initialize(US);
+    Timer1.attachInterrupt(timerinterrupt);
+}
+
+IRMP_DATA irmp_data[3];
+uint8_t act_data = 0;
+int incomingByte = 0;   // for incoming serial data
+
+void loop()
+{
+    IRMP_DATA* data = &irmp_data[act_data];
+    if (irmp_get_data(data))
+    {
+	led(HIGH);
+#if IRMP_PROTOCOL_NAMES == 1
+        Serial.print(irmp_protocol_names[data->protocol]);
+        Serial.print(" ");
+#endif
+        Serial.print("P:");
+        Serial.print(data->protocol, HEX);
+        Serial.print(" A:");
+        Serial.print(data->address, HEX);
+        Serial.print(" C:");
+        Serial.print(data->command, HEX);
+        Serial.print(" ");
+        Serial.print(data->flags, HEX);
+        Serial.println("");
+        /* Serial.print is asynchronous, so the LED is only flashing very lightly */
+        led(LOW);
+
+        data->flags = 0;    // reset flags!
+        int result = irsnd_send_data(data, TRUE);
+        if (result != 1)
+	{
+	    Serial.println("loop : irsnd_send_data ERROR");
+	}
+	else
+	{
+	    if (++act_data >= 3)
+	    {
+		act_data = 0;
+	    } 
+	}
+    }
+
+    if (Serial.available() == 18 && readAndCheck('P') && readAndCheck(':'))
+    {
+        // read the protocol
+        data->protocol = readHex() * 16 + readHex();
+
+        if (readAndCheck(' ') && readAndCheck('A') && readAndCheck(':'))
+	{
+	    // read the address
+	    data->address = ((readHex() * 16 + readHex()) * 16 + readHex()) * 16 + readHex();
+
+	    if (readAndCheck(' ') && readAndCheck('C') && readAndCheck(':'))
+	    {
+		// read the address
+		data->command = ((readHex() * 16 + readHex()) * 16 + readHex()) * 16 + readHex();
+
+		// send ir data
+		data->flags = 0;
+		int result = irsnd_send_data(data, TRUE);
+		if (result)
+		{
+		    Serial.print("Send IR data: ");
+		    Serial.print("P:");
+		    Serial.print(data->protocol, HEX);
+		    Serial.print(" A:");
+		    Serial.print(data->address, HEX);
+		    Serial.print(" C:");
+		    Serial.print(data->command, HEX);
+		    Serial.println("");
+
+		    if (++act_data >= 3)
+		    {
+			act_data = 0;
+		    } 
+		}
+	    }
+	}
+    }
+}
+
+/* helper function: attachInterrupt wants void(), but irmp_ISR is uint8_t() */
+void timerinterrupt()
+{
+    // only when tsop dont see the ir_led flashing
+    irsnd_ISR();			// call irsnd ISR
+    irmp_ISR();               		// call irmp ISR
+
+/*
+    // do not receive when sending (tsop see the ir_led)
+    if (! irsnd_ISR())          	// call irsnd ISR
+    {                           	// if not busy...
+	irmp_ISR();               	// call irmp ISR
+    }
+*/
+}
+
+static inline void led(int state)
+{
+#ifdef LED_PIN
+    digitalWrite(LED_PIN, state);
+#endif
+}
+
+static inline int readAndCheck(int c)
+{
+    return c == Serial.read();
+}
+
+static inline int readHex()
+{
+    int c = Serial.read();
+    if (c >= '0' && c <= '9')
+    {
+	return c - '0';
+    }
+
+    c |= 0x20; // lowercase
+
+    if (c >= 'a' && c <= 'f')
+    {
+	return c + 10 - 'a';
+    }
+
+    return -1;
+}