Integrate fatfs. Add some sd card test commands.

[z180-stamp.git] / fatfs / src / diskio.h

diff --git a/fatfs/src/diskio.h b/fatfs/src/diskio.h
deleted file mode 100644 (file)
index 9650f68..0000000
--- a/fatfs/src/diskio.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/*-----------------------------------------------------------------------/\r
-/  Low level disk interface modlue include file   (C)ChaN, 2014          /\r
-/-----------------------------------------------------------------------*/\r
-\r
-#ifndef _DISKIO_DEFINED\r
-#define _DISKIO_DEFINED\r
-\r
-#ifdef __cplusplus\r
-extern "C" {\r
-#endif\r
-\r
-#define _USE_WRITE     1       /* 1: Enable disk_write function */\r
-#define _USE_IOCTL     1       /* 1: Enable disk_ioctl fucntion */\r
-\r
-#include "integer.h"\r
-\r
-\r
-/* Status of Disk Functions */\r
-typedef BYTE   DSTATUS;\r
-\r
-/* Results of Disk Functions */\r
-typedef enum {\r
-       RES_OK = 0,             /* 0: Successful */\r
-       RES_ERROR,              /* 1: R/W Error */\r
-       RES_WRPRT,              /* 2: Write Protected */\r
-       RES_NOTRDY,             /* 3: Not Ready */\r
-       RES_PARERR              /* 4: Invalid Parameter */\r
-} DRESULT;\r
-\r
-\r
-/*---------------------------------------*/\r
-/* Prototypes for disk control functions */\r
-\r
-\r
-DSTATUS disk_initialize (BYTE pdrv);\r
-DSTATUS disk_status (BYTE pdrv);\r
-DRESULT disk_read (BYTE pdrv, BYTE* buff, DWORD sector, UINT count);\r
-DRESULT disk_write (BYTE pdrv, const BYTE* buff, DWORD sector, UINT count);\r
-DRESULT disk_ioctl (BYTE pdrv, BYTE cmd, void* buff);\r
-\r
-\r
-/* Disk Status Bits (DSTATUS) */\r
-\r
-#define STA_NOINIT             0x01    /* Drive not initialized */\r
-#define STA_NODISK             0x02    /* No medium in the drive */\r
-#define STA_PROTECT            0x04    /* Write protected */\r
-\r
-\r
-/* Command code for disk_ioctrl fucntion */\r
-\r
-/* Generic command (Used by FatFs) */\r
-#define CTRL_SYNC                      0       /* Complete pending write process (needed at _FS_READONLY == 0) */\r
-#define GET_SECTOR_COUNT       1       /* Get media size (needed at _USE_MKFS == 1) */\r
-#define GET_SECTOR_SIZE                2       /* Get sector size (needed at _MAX_SS != _MIN_SS) */\r
-#define GET_BLOCK_SIZE         3       /* Get erase block size (needed at _USE_MKFS == 1) */\r
-#define CTRL_TRIM                      4       /* Inform device that the data on the block of sectors is no longer used (needed at _USE_TRIM == 1) */\r
-\r
-/* Generic command (Not used by FatFs) */\r
-#define CTRL_POWER                     5       /* Get/Set power status */\r
-#define CTRL_LOCK                      6       /* Lock/Unlock media removal */\r
-#define CTRL_EJECT                     7       /* Eject media */\r
-#define CTRL_FORMAT                    8       /* Create physical format on the media */\r
-\r
-/* MMC/SDC specific ioctl command */\r
-#define MMC_GET_TYPE           10      /* Get card type */\r
-#define MMC_GET_CSD                    11      /* Get CSD */\r
-#define MMC_GET_CID                    12      /* Get CID */\r
-#define MMC_GET_OCR                    13      /* Get OCR */\r
-#define MMC_GET_SDSTAT         14      /* Get SD status */\r
-\r
-/* ATA/CF specific ioctl command */\r
-#define ATA_GET_REV                    20      /* Get F/W revision */\r
-#define ATA_GET_MODEL          21      /* Get model name */\r
-#define ATA_GET_SN                     22      /* Get serial number */\r
-\r
-#ifdef __cplusplus\r
-}\r
-#endif\r
-\r
-#endif\r