+/*
+ * (C) Copyright 2014-2016 Leo C. <erbl259-lmu@yahoo.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
#include "common.h"
-
#include "command.h"
#include "cmd_mem.h"
-
extern command_ret_t do_help(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_echo(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_sleep(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_env_set(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_env_save(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_loadf(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_bootcf(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_loadcpm3(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_loadihex(cmd_tbl_t *, int, int, char * const []);
+#if defined(CONFIG_CMD_LOADB)
+extern command_ret_t do_load_serial_bin(cmd_tbl_t *, int, int, char * const []);
+#endif
extern command_ret_t do_go(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_restart(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_console(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_dump_mem(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_mem_mm_avr(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_mem_nm_avr(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_eep_cp(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_busreq_pulse(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_date(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_gpio(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_sd(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_fat_stat(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_fat_ls(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_fat_rw(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_run(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_source(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_attach(cmd_tbl_t *, int, int, char * const []);
#ifdef CONFIG_SYS_LONGHELP
const FLASH char sd_help_text[] =
CMD_TBL_ITEM(
date, 2, 1, do_date,
- "get/set/reset date & time",
- "[MMDDhhmm[[CC]YY][.ss]]\ndate reset\n"
+ "get/set date & time",
+ "[MMDDhhmm[[CC]YY][.ss]]\n"
" - without arguments: print date & time\n"
" - with numeric argument: set the system date & time\n"
- " - with 'reset' argument: reset the RTC"
),
#ifdef DEBUG
+
CMD_TBL_ITEM(
!mdr, 3, 1, do_dump_mem,
"RAM dump",
"EEPROM dump",
"address [count]"
),
+CMD_TBL_ITEM(
+ !mdf, 3, 1, do_dump_mem,
+ "FLASH dump",
+ "address [count]"
+),
CMD_TBL_ITEM(
!cpe, 4, 0, do_eep_cp,
"EEPROM copy",
"source target count"
),
+CMD_TBL_ITEM(
+ !mm, 2, 1, do_mem_mm_avr,
+ "avr memory modify (auto-incrementing address)",
+ "address"
+),
+CMD_TBL_ITEM(
+ !nm, 2, 1, do_mem_nm_avr,
+ "avr memory modify (constant address)",
+ "address"
+),
#endif
CMD_TBL_ITEM(
mstep, 2, 1, do_busreq_pulse,
),
CMD_TBL_ITEM(
echo, CONFIG_SYS_MAXARGS, 1, do_echo,
- "echo args to console",
- "[args..]\n"
- " - echo args to console; \\c suppresses newline"
+ "display a line of text",
+ "[-n] [argument ...]\n"
+ "- echo the argument(s) to console.\n"
+ " -n do not output the trailing newline"
),
CMD_TBL_ITEM(
sleep , 2, 1, do_sleep,
" - run the commands in the environment variable(s) 'var'",
var_complete
),
+CMD_TBL_ITEM_COMPLETE(
+ source, CONFIG_SYS_MAXARGS, 1, do_source,
+ "run commands from a file",
+ "filename\n"
+ " - run the commands in the script file 'filename'",
+ var_complete
+),
CMD_TBL_ITEM_COMPLETE(
printenv, CONFIG_SYS_MAXARGS, 1, do_env_print,
"print environment variables",
- "\n"
- " - print values of all environment variables\n"
- "printenv name ...\n"
- " - print value of environment variable 'name'",
+ "[-s] [name ...]\n"
+ " Print value of environment variable(s) 'name'\n"
+ " If no names are given, print values of all environment variables\n"
+ " -s Print in setenv form",
var_complete
),
CMD_TBL_ITEM_COMPLETE(
"load srec_cat prepared image from controller flash",
""
),
+CMD_TBL_ITEM(
+ bootcf, CONFIG_SYS_MAXARGS, 0, do_bootcf,
+ "boot from cf card",
+ "[options]\n"
+ " Load a number of sectors from the first CP/M partition and jump to\n"
+ " the load address.\n"
+ " -a ADDRESS\n"
+ " Load and start address (default 100 hex)\n"
+ " -s NUM\n"
+ " First sector of partition to load (0..255, default 0)\n"
+ " -c NUM\n"
+ " Number of sectors to load (1..127, default 7)\n"
+ " -i NUM\n"
+ " Partition type to look for (default 52 hex)\n"
+ " -n\n"
+ " Load only, do not execute\n"
+ " -t NUM\n"
+ " Timeout for IDE commands (1..65535, default 10000)\n"
+ " -v verbose\n"
+ " TODO: be verbose"
+),
+CMD_TBL_ITEM(
+ loadcpm3, 3, 0, do_loadcpm3,
+ "load CPM3.SYS file",
+ "[filename [common-base [banked-base]]] \n"
+ " - Load CP/M 3 system file from FAT filesystem. This command makes\n"
+ " CPMLDR superfluous. Uses the following environment variables if set:\n"
+ " '"ENV_CPM3_SYSFILE"' File to load. Default is '"CONFIG_CPM3_SYSFILE"'.\n"
+ " '"ENV_CPM3_BANKED_BASE"' Default is '"CONFIG_CPM3_BANKED_BASE_STR"'.\n"
+ " Sets the following environment variables after loading:\n"
+ " '"ENV_CPM3_COMMON_BASE"'\n"
+ " '"ENV_STARTADDRESS"'"
+),
+CMD_TBL_ITEM(
+ loadi, 2, 0, do_loadihex,
+ "load intel hex file over serial line",
+ "[[-]offset]\n"
+ " - load Intel-Hex-Record file over serial line with offset 'offset'"
+),
+
+#if defined(CONFIG_CMD_LOADB)
+CMD_TBL_ITEM(
+ loadb, 1, 0, do_load_serial_bin,
+ "load binary file over serial line (kermit mode)",
+ " - load binary file over serial line"
+),
+
+CMD_TBL_ITEM(
+ loadx, 1, 0, do_load_serial_bin,
+ "load binary file over serial line (xmodem mode)",
+ " - load binary file over serial line"
+),
+
+CMD_TBL_ITEM(
+ loady, 1, 0, do_load_serial_bin,
+ "load binary file over serial line (ymodem mode)",
+ " - load binary file over serial line"
+),
+#endif /* CONFIG_CMD_LOADB */
+
CMD_TBL_ITEM(
go, 2, 0, do_go,
"start application at address 'addr'",
""
),
CMD_TBL_ITEM(
- connect, 1, 1, do_console,
+ connect, 1, 0, do_console,
"Connect to CPU console i/o",
- ""
+ "\n"
+ " - type the escape character followed by Q to close the connection, \n"
+ " or followed by ? to see other options. The default escape character \n"
+ " is Ctrl-^ (0x1E). It can be changed by setting env var '"ENV_ESC_CHAR"'."
+
),
CMD_TBL_ITEM(
"address"
),
CMD_TBL_ITEM(
- mw, 4, 1, do_mem_mw,
+ mw, CONFIG_SYS_MAXARGS, 1, do_mem_mw,
"memory write (fill)",
- "address value [count]"
+ "[-bwl] address value [count]\n"
+ " -b write value as byte (8 bit, default)\n"
+ " -w write value as word (16 bit)\n"
+ " -l write value as long (32 bit)"
),
CMD_TBL_ITEM(
cp, 4, 1, do_mem_cp,
"addr1 addr2 count"
),
CMD_TBL_ITEM(
- base, 2, 1, do_mem_base,
+ base, 2, 0, do_mem_base,
"print or set address offset",
"\n"
" - print address offset for memory commands\n"
" - set address offset for memory commands to 'offset'"
),
CMD_TBL_ITEM(
- loop, 3, 1, do_mem_loop,
+ mloop, 3, 1, do_mem_loop,
"infinite loop on address range",
"address number_of_bytes"
),
-#ifdef CONFIG_LOOPW
CMD_TBL_ITEM(
- loopw, 4, 1, do_mem_loopw,
+ mloopw, 4, 1, do_mem_loopw,
"infinite write loop on address range",
"address number_of_bytes data_to_write"
),
-#endif /* CONFIG_LOOPW */
#ifdef CONFIG_CMD_MEMTEST
CMD_TBL_ITEM(
- mtest, 5, 1, do_mem_mtest,
+ mtest, 4, 1, do_mem_mtest,
"simple RAM read/write test",
- "[start [end [pattern [iterations]]]]"
+ "[start [end [iterations]]]"
),
#endif /* CONFIG_CMD_MEMTEST */
"address count delay(ms)"
),
CMD_TBL_ITEM(
- mwc, 4, 1, do_mem_mwc,
+ mwc, CONFIG_SYS_MAXARGS, 1, do_mem_mdc,
"memory write cyclic",
- "address value delay(ms)"
+ "[-bwl] address value delay(ms)\n"
+ " -b write value as byte (8 bit, default)\n"
+ " -w write value as word (16 bit)\n"
+ " -l write value as long (32 bit)"
),
#endif /* CONFIG_MX_CYCLIC */
+CMD_TBL_ITEM(
+ sd, CONFIG_SYS_MAXARGS, 1, do_sd,
+ "SD/MMC card handling commands",
+ "<subcommand> args ...\n"
+ "sd help\n"
+ " - print help on subcommands"
+),
+
+CMD_TBL_ITEM(
+ fatstat, 2, 1, do_fat_stat,
+ "Show logical drive status",
+ "dev"
+),
+CMD_TBL_ITEM(
+ fatls, 2, 1, do_fat_ls,
+ "Directory listing",
+ "path"
+),
+CMD_TBL_ITEM(
+ fatload, 5, 0, do_fat_rw,
+ "load binary file from a dos filesystem",
+ "<d:/path/filename> <addr> [bytes [pos]]\n"
+ " - Load binary file 'path/filename' on logical drive 'd'\n"
+ " to address 'addr' from dos filesystem.\n"
+ " 'pos' gives the file position to start loading from.\n"
+ " If 'pos' is omitted, 0 is used. 'pos' requires 'bytes'.\n"
+ " 'bytes' gives the size to load. If 'bytes' is 0 or omitted,\n"
+ " the load stops on end of file."
+),
+CMD_TBL_ITEM(
+ fatwrite, 4, 0, do_fat_rw,
+ "write file into a dos filesystem",
+ "<d:/path/filename> <addr> <bytes>\n"
+ " - Write file to 'path/filename' on logical drive 'd' from RAM\n"
+ " starting at address 'addr'.\n"
+),
+CMD_TBL_ITEM(
+ attach, CONFIG_SYS_MAXARGS, 1, do_attach,
+ "attach filesystem image file to CP/M drive",
+ "[-rw] [-o options] dsk<n> diskfile\n"
+ " Attach diskfile to dsk<n>, where n in 0..7\n"
+ " -r File is read only (write protected)\n"
+ " -w File is read/write (default)\n"
+ " -o options\n"
+ " Options is a comma-separated list of\n"
+ " ro, rw, debug, nodebug\n"
+ "\n"
+ "attach [-rw] -o reattach[,other options] dsk<n>\n"
+ " Change options for dsk<n>.\n"
+ " Options as above.\n"
+ "\n"
+ "attach -d -a|dsk<n>\n"
+ "detach -a|dsk<n>\n"
+ " Detach diskfile from dsk<n>.\n"
+ " -a Detach all.\n"
+ "\n"
+ "attach\n"
+ " Without arguments, list current assignments\n"
+),
+CMD_TBL_ITEM(
+ detach, 2, 1, do_attach,
+ "detach file from CP/M drive",
+ "dsk<n>]\n"
+ " - alias for 'attach -d dsk<n>'"
+),
CMD_TBL_ITEM(
help, CONFIG_SYS_MAXARGS, 1, do_help,
" - print detailed usage of 'command'"
),
-/* TODO: make macro CMD_TBL_ITEM work with this */
- {FSTR("sd"), CONFIG_SYS_MAXARGS, 1, do_sd,
- FSTR("SD/MMC card handling commands"),
-#ifdef CONFIG_SYS_LONGHELP
- sd_help_text,
-#endif /* CONFIG_SYS_LONGHELP */
-#ifdef CONFIG_AUTO_COMPLETE
- 0,
-#endif
-},
-
/* This does not use the CMD_TBL_ITEM macro as ? can't be used in symbol names */
{FSTR("?"), CONFIG_SYS_MAXARGS, 1, do_help,
FSTR("alias for 'help'"),
projects / z180-stamp.git / blobdiff