#include "common.h"
#include "command.h"
#include "cmd_mem.h"
-
-extern command_ret_t do_help(cmd_tbl_t *, int, int, char * const []);
-extern command_ret_t do_echo(cmd_tbl_t *, int, int, char * const []);
-extern command_ret_t do_sleep(cmd_tbl_t *, int, int, char * const []);
-extern command_ret_t do_env_print(cmd_tbl_t *, int, int, char * const []);
-extern command_ret_t do_env_default(cmd_tbl_t *, int, int, char * const []);
-extern command_ret_t do_env_set(cmd_tbl_t *, int, int, char * const []);
-extern command_ret_t do_env_save(cmd_tbl_t *, int, int, char * const []);
-extern command_ret_t do_loadf(cmd_tbl_t *, int, int, char * const []);
-extern command_ret_t do_bootcf(cmd_tbl_t *, int, int, char * const []);
-extern command_ret_t do_loadcpm3(cmd_tbl_t *, int, int, char * const []);
-extern command_ret_t do_loadihex(cmd_tbl_t *, int, int, char * const []);
-#if defined(CONFIG_CMD_LOADB)
-extern command_ret_t do_load_serial_bin(cmd_tbl_t *, int, int, char * const []);
-#endif
-extern command_ret_t do_go(cmd_tbl_t *, int, int, char * const []);
-extern command_ret_t do_restart(cmd_tbl_t *, int, int, char * const []);
-extern command_ret_t do_console(cmd_tbl_t *, int, int, char * const []);
-extern command_ret_t do_dump_mem(cmd_tbl_t *, int, int, char * const []);
-extern command_ret_t do_mem_mm_avr(cmd_tbl_t *, int, int, char * const []);
-extern command_ret_t do_mem_nm_avr(cmd_tbl_t *, int, int, char * const []);
-extern command_ret_t do_eep_cp(cmd_tbl_t *, int, int, char * const []);
-extern command_ret_t do_busreq_pulse(cmd_tbl_t *, int, int, char * const []);
-extern command_ret_t do_date(cmd_tbl_t *, int, int, char * const []);
-extern command_ret_t do_gpio(cmd_tbl_t *, int, int, char * const []);
-extern command_ret_t do_sd(cmd_tbl_t *, int, int, char * const []);
-extern command_ret_t do_fat_stat(cmd_tbl_t *, int, int, char * const []);
-extern command_ret_t do_fat_ls(cmd_tbl_t *, int, int, char * const []);
-extern command_ret_t do_fat_rw(cmd_tbl_t *, int, int, char * const []);
-extern command_ret_t do_run(cmd_tbl_t *, int, int, char * const []);
-extern command_ret_t do_source(cmd_tbl_t *, int, int, char * const []);
-extern command_ret_t do_attach(cmd_tbl_t *, int, int, char * const []);
-
-#ifdef CONFIG_SYS_LONGHELP
-const FLASH char sd_help_text[] =
- "bla \t- do bla\n"
- ;
-#endif /* CONFIG_SYS_LONGHELP */
+#include "cmd_boot.h"
+#include "cmd_misc.h"
+#include "cmd_date.h"
+#include "cmd_run.h"
+#include "cmd_loadcpm3.h"
+#include "cmd_loadihex.h"
+#include "cmd_gpio.h"
+#include "cmd_sd.h"
+#include "cmd_fat.h"
+#include "cmd_attach.h"
+#include "env.h"
+#include "debug.h"
cmd_tbl_t cmd_tbl[] = {
#ifdef DEBUG
CMD_TBL_ITEM(
- !mdr, 3, 1, do_dump_mem,
+ !mdr, 3, CTBL_DBG|CTBL_RPT, do_dump_mem,
"RAM dump",
"address [count]"
),
CMD_TBL_ITEM(
- !mde, 3, 1, do_dump_mem,
+ !mde, 3, CTBL_DBG|CTBL_RPT, do_dump_mem,
"EEPROM dump",
"address [count]"
),
CMD_TBL_ITEM(
- !mdf, 3, 1, do_dump_mem,
+ !mdf, 3, CTBL_DBG|CTBL_RPT, do_dump_mem,
"FLASH dump",
"address [count]"
),
CMD_TBL_ITEM(
- !cpe, 4, 0, do_eep_cp,
+ !cpe, 4, CTBL_DBG, do_eep_cp,
"EEPROM copy",
"source target count"
),
CMD_TBL_ITEM(
- !mm, 2, 1, do_mem_mm_avr,
+ !mm, 2, CTBL_DBG|CTBL_RPT, do_mem_mm_avr,
"avr memory modify (auto-incrementing address)",
"address"
),
CMD_TBL_ITEM(
- !nm, 2, 1, do_mem_nm_avr,
+ !nm, 2, CTBL_DBG|CTBL_RPT, do_mem_nm_avr,
"avr memory modify (constant address)",
"address"
),
+CMD_TBL_ITEM(
+ !prfree, 1, CTBL_DBG|CTBL_RPT, do_pr_free_avr,
+ "print avr heap free list",
+ ""
+),
+CMD_TBL_ITEM(
+ !prheap, 1, CTBL_DBG, do_pr_heap_avr,
+ "dump avr heap",
+ ""
+),
#endif
CMD_TBL_ITEM(
mstep, 2, 1, do_busreq_pulse,
),
CMD_TBL_ITEM(
- md, 3, 1, do_mem_md,
+ md, 3, CTBL_RPT, do_mem_md,
"memory display",
"address [# of objects]"
),
CMD_TBL_ITEM(
- mm, 2, 1, do_mem_mm,
+ mm, 2, CTBL_RPT, do_mem_mm,
"memory modify (auto-incrementing address)",
"address"
),
CMD_TBL_ITEM(
- nm, 2, 1, do_mem_nm,
+ nm, 2, CTBL_RPT, do_mem_nm,
"memory modify (constant address)",
"address"
),
CMD_TBL_ITEM(
- mw, CONFIG_SYS_MAXARGS, 1, do_mem_mw,
+ mw, CONFIG_SYS_MAXARGS, CTBL_RPT, do_mem_mw,
"memory write (fill)",
"[-bwl] address value [count]\n"
" -b write value as byte (8 bit, default)\n"
" -w write value as word (16 bit)\n"
- " -l write value as long (32 bit)\n"
+ " -l write value as long (32 bit)"
),
CMD_TBL_ITEM(
- cp, 4, 1, do_mem_cp,
+ cp, 4, CTBL_RPT, do_mem_cp,
"memory copy",
"source target count"
),
CMD_TBL_ITEM(
- cmp, 4, 1, do_mem_cmp,
+ cmp, 4, CTBL_RPT, do_mem_cmp,
"memory compare",
"addr1 addr2 count"
),
" - set address offset for memory commands to 'offset'"
),
CMD_TBL_ITEM(
- mloop, 3, 1, do_mem_loop,
+ mloop, 3, CTBL_RPT, do_mem_loop,
"infinite loop on address range",
"address number_of_bytes"
),
CMD_TBL_ITEM(
- mloopw, 4, 1, do_mem_loopw,
+ mloopw, 4, CTBL_RPT, do_mem_loopw,
"infinite write loop on address range",
"address number_of_bytes data_to_write"
),
#ifdef CONFIG_CMD_MEMTEST
CMD_TBL_ITEM(
- mtest, 4, 1, do_mem_mtest,
+ mtest, 4, CTBL_RPT, do_mem_mtest,
"simple RAM read/write test",
"[start [end [iterations]]]"
),
#ifdef CONFIG_MX_CYCLIC
CMD_TBL_ITEM(
- mdc, 4, 1, do_mem_mdc,
+ mdc, 4, CTBL_RPT, do_mem_mdc,
"memory display cyclic",
"address count delay(ms)"
),
CMD_TBL_ITEM(
- mwc, 4, 1, do_mem_mdc,
+ mwc, CONFIG_SYS_MAXARGS, CTBL_RPT, do_mem_mdc,
"memory write cyclic",
- "address value delay(ms)"
+ "[-bwl] address value delay(ms)\n"
+ " -b write value as byte (8 bit, default)\n"
+ " -w write value as word (16 bit)\n"
+ " -l write value as long (32 bit)"
),
#endif /* CONFIG_MX_CYCLIC */
-CMD_TBL_ITEM(
- sd, CONFIG_SYS_MAXARGS, 1, do_sd,
+CMD_TBL_ITEM_TOP(
+ sd, CONFIG_SYS_MAXARGS, CTBL_SUBCMDAUTO, do_sd,
"SD/MMC card handling commands",
"<subcommand> args ...\n"
"sd help\n"
- " - print help on subcommands"
-),
-
-CMD_TBL_ITEM(
- fatstat, 2, 1, do_fat_stat,
- "Show logical drive status",
- "dev"
-),
-CMD_TBL_ITEM(
- fatls, 2, 1, do_fat_ls,
- "Directory listing",
- "path"
-),
-CMD_TBL_ITEM(
- fatload, 5, 0, do_fat_rw,
- "load binary file from a dos filesystem",
- "<d:/path/filename> <addr> [bytes [pos]]\n"
- " - Load binary file 'path/filename' on logical drive 'd'\n"
- " to address 'addr' from dos filesystem.\n"
- " 'pos' gives the file position to start loading from.\n"
- " If 'pos' is omitted, 0 is used. 'pos' requires 'bytes'.\n"
- " 'bytes' gives the size to load. If 'bytes' is 0 or omitted,\n"
- " the load stops on end of file."
+ " - print help on subcommands",
+ cmd_tbl_sd
),
-CMD_TBL_ITEM(
- fatwrite, 4, 0, do_fat_rw,
- "write file into a dos filesystem",
- "<d:/path/filename> <addr> <bytes>\n"
- " - Write file to 'path/filename' on logical drive 'd' from RAM\n"
- " starting at address 'addr'.\n"
+CMD_TBL_ITEM_TOP(
+ fat, CONFIG_SYS_MAXARGS, CTBL_SUBCMD|CTBL_SUBCMDAUTO, do_fat,
+ "fat filesystem commands",
+ "<subcommand> args ...\n"
+ "fat help\n"
+ " - print help on subcommands",
+ cmd_tbl_fat
),
+
CMD_TBL_ITEM(
- attach, CONFIG_SYS_MAXARGS, 1, do_attach,
+ attach, CONFIG_SYS_MAXARGS, CTBL_RPT, do_attach,
"attach filesystem image file to CP/M drive",
"[-rw] [-o options] dsk<n> diskfile\n"
" Attach diskfile to dsk<n>, where n in 0..7\n"
" -a Detach all.\n"
"\n"
"attach\n"
- " Without arguments, list current assignments\n"
+ " Without arguments, list current assignments"
),
CMD_TBL_ITEM(
- detach, 2, 1, do_attach,
+ detach, 2, 0, do_attach,
"detach file from CP/M drive",
"dsk<n>]\n"
" - alias for 'attach -d dsk<n>'"
),
CMD_TBL_ITEM(
- help, CONFIG_SYS_MAXARGS, 1, do_help,
+ help, CONFIG_SYS_MAXARGS, 0, do_help,
"print command description/usage",
"\n"
" - print brief description of all commands\n"
#ifdef CONFIG_SYS_LONGHELP
FSTR(""),
#endif /* CONFIG_SYS_LONGHELP */
+ NULL,
#ifdef CONFIG_AUTO_COMPLETE
- 0,
+ NULL,
#endif
},
/* Mark end of table */
-{ 0 },
+CMD_TBL_END(cmd_tbl)
};
projects / z180-stamp.git / blobdiff