#include "cmd_mem.h"
-extern int do_help(cmd_tbl_t *, int, int, char * const []);
-extern int do_echo(cmd_tbl_t *, int, int, char * const []);
-extern int do_env_print(cmd_tbl_t *, int, int, char * const []);
-extern int do_env_set(cmd_tbl_t *, int, int, char * const []);
-extern int do_env_save(cmd_tbl_t *, int, int, char * const []);
-extern int do_loadf(cmd_tbl_t *, int, int, char * const []);
-extern int do_go(cmd_tbl_t *, int, int, char * const []);
-extern int do_restart(cmd_tbl_t *, int, int, char * const []);
-extern int do_dump_eep(cmd_tbl_t *, int, int, char * const []);
-extern int do_eep_cp(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_help(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_echo(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_sleep(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_env_print(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_env_default(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_env_set(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_env_save(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_loadf(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_go(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_restart(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_console(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_dump_mem(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_eep_cp(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_busreq_pulse(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_date(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_pin(cmd_tbl_t *, int, int, char * const []);
cmd_tbl_t cmd_tbl[] = {
+CMD_TBL_ITEM(
+ date, 2, 1, do_date,
+ "get/set/reset date & time",
+ "[MMDDhhmm[[CC]YY][.ss]]\ndate reset\n"
+ " - without arguments: print date & time\n"
+ " - with numeric argument: set the system date & time\n"
+ " - with 'reset' argument: reset the RTC"
+),
+
#ifdef DEBUG
CMD_TBL_ITEM(
- !emd, 3, 0, do_dump_eep,
+ !mdr, 3, 1, do_dump_mem,
+ "RAM dump",
+ "address [count]"
+),
+CMD_TBL_ITEM(
+ !mde, 3, 1, do_dump_mem,
"EEPROM dump",
"address [count]"
),
CMD_TBL_ITEM(
- !ecp, 4, 1, do_eep_cp,
+ !cpe, 4, 0, do_eep_cp,
"EEPROM copy",
"source target count"
),
#endif
+CMD_TBL_ITEM(
+ mstep, 2, 1, do_busreq_pulse,
+ "execute one M cycle",
+ "[count]\n"
+ " - repeat count times"
+),
CMD_TBL_ITEM(
echo, CONFIG_SYS_MAXARGS, 1, do_echo,
"echo args to console",
"[args..]\n"
" - echo args to console; \\c suppresses newline"
),
+CMD_TBL_ITEM(
+ sleep , 2, 1, do_sleep,
+ "delay execution for some time",
+ "N[m][s]\n"
+ " - delay execution for decimal N (milli) seconds"
+),
CMD_TBL_ITEM_COMPLETE(
run, CONFIG_SYS_MAXARGS, 1, do_run,
"run commands in an environment variable",
"save environment variables to persistent storage",
""
),
+CMD_TBL_ITEM(
+ defaultenv, 1, 0, do_env_default,
+ "set all environment variables to their default values",
+ ""
+),
CMD_TBL_ITEM(
loadf, 1, 0, do_loadf,
""
),
CMD_TBL_ITEM(
- restart, 1, 0, do_restart,
+ restart, 1, 1, do_restart,
"Perform RESET of the CPU",
""
),
+CMD_TBL_ITEM(
+ connect, 1, 1, do_console,
+ "Connect to CPU console i/o",
+ ""
+),
+
+#if 0
+CMD_TBL_ITEM(
+ clock, 2, 0, do_clock,
+ "Set or get CPU frequency",
+ "\n"
+ " - print frequency or state of clock pin\n"
+ "clock value[K|M]\n"
+ " - set frequency of clock pin to value\n"
+ "clock [high|low]\n"
+ " - set clock pin level high or low"
+),
+CMD_TBL_ITEM(
+ clk2, 3, 0, do_clock2,
+ "Set or get clk2 frequency",
+ "\n"
+ " - print frequency or state of clk2 pin\n"
+ "clk2 [-d] value[K|M]\n"
+ " - set frequency of clk2 pin to value\n"
+ "clk2 [high|low]\n"
+ " - set clk2 pin level high or low"
+),
+#endif
+
+CMD_TBL_ITEM(
+ pin, CONFIG_SYS_MAXARGS, 0, do_pin,
+ "Set or query pin state",
+ "[-s] [<pins>]\n"
+ " - print cofiguration and state or frequency of pins\n"
+ " print all pins, if argument is omitted\n"
+ "pin <pins> h[igh]|l[ow]\n"
+ " - config pins as output and set to level high or low\n"
+ "pin <pins> ts|i[n]|p[ullup]\n"
+ " - config pins as input/tristate or input with pullup\n"
+ "pin <pins> value[K|M][Hz]\n"
+ " - output a clock on pins\n"
+ " value is system clock divider or frequency, if 'Hz' is appended\n"
+ " divider is rounded down to next possible value (depends on pin)\n"
+ "\n"
+ "<pins> is a comma separated list of numbers or ranges, i.e. \"0,9,3-6\"\n"
+),
CMD_TBL_ITEM(
md, 3, 1, do_mem_md,