+/*
+ * (C) Copyright 2014 Leo C. <erbl259-lmu@yahoo.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
#include "common.h"
-
#include "command.h"
#include "cmd_mem.h"
+extern command_ret_t do_help(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_echo(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_sleep(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_env_print(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_env_default(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_env_set(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_env_save(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_loadf(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_loadcpm3(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_loadihex(cmd_tbl_t *, int, int, char * const []);
+#if defined(CONFIG_CMD_LOADB)
+extern command_ret_t do_load_serial_bin(cmd_tbl_t *, int, int, char * const []);
+#endif
+extern command_ret_t do_go(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_restart(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_console(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_dump_mem(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_mem_mm_avr(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_mem_nm_avr(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_eep_cp(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_busreq_pulse(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_date(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_gpio(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_sd(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_fat_stat(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_fat_ls(cmd_tbl_t *, int, int, char * const []);
+//extern command_ret_t do_fat_read(cmd_tbl_t *, int, int, char * const []);
+//extern command_ret_t do_fat_write(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_fat_rw(cmd_tbl_t *, int, int, char * const []);
-extern int do_help(cmd_tbl_t *, int, int, char * const []);
-extern int do_echo(cmd_tbl_t *, int, int, char * const []);
-extern int do_env_print(cmd_tbl_t *, int, int, char * const []);
-extern int do_env_set(cmd_tbl_t *, int, int, char * const []);
-extern int do_env_save(cmd_tbl_t *, int, int, char * const []);
-extern int do_loadf(cmd_tbl_t *, int, int, char * const []);
-extern int do_go(cmd_tbl_t *, int, int, char * const []);
-extern int do_restart(cmd_tbl_t *, int, int, char * const []);
-extern int do_dump_eep(cmd_tbl_t *, int, int, char * const []);
-extern int do_eep_cp(cmd_tbl_t *, int, int, char * const []);
+#ifdef CONFIG_SYS_LONGHELP
+const FLASH char sd_help_text[] =
+ "bla \t- do bla\n"
+ ;
+#endif /* CONFIG_SYS_LONGHELP */
cmd_tbl_t cmd_tbl[] = {
+CMD_TBL_ITEM(
+ date, 2, 1, do_date,
+ "get/set date & time",
+ "[MMDDhhmm[[CC]YY][.ss]]\ndate reset\n"
+ " - without arguments: print date & time\n"
+ " - with numeric argument: set the system date & time\n"
+),
+
#ifdef DEBUG
+
CMD_TBL_ITEM(
- !emd, 3, 0, do_dump_eep,
+ !mdr, 3, 1, do_dump_mem,
+ "RAM dump",
+ "address [count]"
+),
+CMD_TBL_ITEM(
+ !mde, 3, 1, do_dump_mem,
"EEPROM dump",
"address [count]"
),
CMD_TBL_ITEM(
- !ecp, 4, 1, do_eep_cp,
+ !mdf, 3, 1, do_dump_mem,
+ "FLASH dump",
+ "address [count]"
+),
+CMD_TBL_ITEM(
+ !cpe, 4, 0, do_eep_cp,
"EEPROM copy",
"source target count"
),
+CMD_TBL_ITEM(
+ !mm, 2, 1, do_mem_mm_avr,
+ "avr memory modify (auto-incrementing address)",
+ "address"
+),
+CMD_TBL_ITEM(
+ !nm, 2, 1, do_mem_nm_avr,
+ "avr memory modify (constant address)",
+ "address"
+),
#endif
+CMD_TBL_ITEM(
+ mstep, 2, 1, do_busreq_pulse,
+ "execute one M cycle",
+ "[count]\n"
+ " - repeat count times"
+),
CMD_TBL_ITEM(
echo, CONFIG_SYS_MAXARGS, 1, do_echo,
- "echo args to console",
- "[args..]\n"
- " - echo args to console; \\c suppresses newline"
+ "display a line of text",
+ "[-n] [argument ...]\n"
+ " - echo the argument(s) to console.\n"
+ " -n do not output the trailing newline"
+),
+CMD_TBL_ITEM(
+ sleep , 2, 1, do_sleep,
+ "delay execution for some time",
+ "N[m][s]\n"
+ " - delay execution for decimal N (milli) seconds"
),
CMD_TBL_ITEM_COMPLETE(
run, CONFIG_SYS_MAXARGS, 1, do_run,
"save environment variables to persistent storage",
""
),
+CMD_TBL_ITEM(
+ defaultenv, 1, 0, do_env_default,
+ "set all environment variables to their default values",
+ ""
+),
CMD_TBL_ITEM(
loadf, 1, 0, do_loadf,
"load srec_cat prepared image from controller flash",
""
),
+CMD_TBL_ITEM(
+ loadcpm3, 3, 0, do_loadcpm3,
+ "load CPM3.SYS file",
+ "[offset] [filename]\n"
+ " - Load CP/M 3 system file from FAT filesystem. This command makes\n"
+ " CPMLDR superfluous. Default filename is '"CONFIG_PATH_CPM3SYS"', but\n"
+ " uses environment variable '"ENV_PATH_CPM3SYS"', if set."
+),
+CMD_TBL_ITEM(
+ loadi, 2, 0, do_loadihex,
+ "load intel hex file over serial line",
+ "[[-]offset]\n"
+ " - load Intel-Hex-Record file over serial line with offset 'offset'"
+),
+
+#if defined(CONFIG_CMD_LOADB)
+CMD_TBL_ITEM(
+ loadb, 1, 0, do_load_serial_bin,
+ "load binary file over serial line (kermit mode)",
+ " - load binary file over serial line"
+),
+
+CMD_TBL_ITEM(
+ loadx, 1, 0, do_load_serial_bin,
+ "load binary file over serial line (xmodem mode)",
+ " - load binary file over serial line"
+),
+
+CMD_TBL_ITEM(
+ loady, 1, 0, do_load_serial_bin,
+ "load binary file over serial line (ymodem mode)",
+ " - load binary file over serial line"
+),
+#endif /* CONFIG_CMD_LOADB */
+
CMD_TBL_ITEM(
go, 2, 0, do_go,
"start application at address 'addr'",
""
),
CMD_TBL_ITEM(
- restart, 1, 0, do_restart,
+ restart, 1, 1, do_restart,
"Perform RESET of the CPU",
""
),
+CMD_TBL_ITEM(
+ connect, 1, 0, do_console,
+ "Connect to CPU console i/o",
+ ""
+),
+
+CMD_TBL_ITEM(
+ pin, CONFIG_SYS_MAXARGS, 1, do_gpio,
+ "Set or query pin state",
+ "[-s] [<pins>]\n"
+ " - print cofiguration and state or frequency of pins\n"
+ " print all pins, if argument is omitted\n"
+ "pin <pins> h[igh]|l[ow]\n"
+ " - config pins as output and set to level high or low\n"
+ "pin <pins> ts|i[n]|p[ullup]\n"
+ " - config pins as input/tristate or input with pullup\n"
+ "pin <pins> value[K|M][Hz]\n"
+ " - output a clock on pins\n"
+ " value is system clock divider or frequency, if 'Hz' is appended\n"
+ " divider is rounded down to next possible value (depends on pin)\n"
+ "\n"
+ "<pins> is a comma separated list of numbers or ranges, i.e. \"0,9,3-6\"\n"
+),
CMD_TBL_ITEM(
md, 3, 1, do_mem_md,
"addr1 addr2 count"
),
CMD_TBL_ITEM(
- base, 2, 1, do_mem_base,
+ base, 2, 0, do_mem_base,
"print or set address offset",
"\n"
" - print address offset for memory commands\n"
" - set address offset for memory commands to 'offset'"
),
CMD_TBL_ITEM(
- loop, 3, 1, do_mem_loop,
+ mloop, 3, 1, do_mem_loop,
"infinite loop on address range",
"address number_of_bytes"
),
-#ifdef CONFIG_LOOPW
CMD_TBL_ITEM(
- loopw, 4, 1, do_mem_loopw,
+ mloopw, 4, 1, do_mem_loopw,
"infinite write loop on address range",
"address number_of_bytes data_to_write"
),
-#endif /* CONFIG_LOOPW */
#ifdef CONFIG_CMD_MEMTEST
CMD_TBL_ITEM(
- mtest, 5, 1, do_mem_mtest,
+ mtest, 4, 1, do_mem_mtest,
"simple RAM read/write test",
- "[start [end [pattern [iterations]]]]"
+ "[start [end [iterations]]]"
),
#endif /* CONFIG_CMD_MEMTEST */
"address count delay(ms)"
),
CMD_TBL_ITEM(
- mwc, 4, 1, do_mem_mwc,
+ mwc, 4, 1, do_mem_mdc,
"memory write cyclic",
"address value delay(ms)"
),
#endif /* CONFIG_MX_CYCLIC */
+CMD_TBL_ITEM(
+ sd, CONFIG_SYS_MAXARGS, 1, do_sd,
+ "SD/MMC card handling commands",
+ "<subcommand> args ...\n"
+ "sd help\n"
+ " - print help on subcommands"
+),
+
+CMD_TBL_ITEM(
+ fatstat, 2, 1, do_fat_stat,
+ "Show logical drive status",
+ "dev"
+),
+CMD_TBL_ITEM(
+ fatls, 2, 1, do_fat_ls,
+ "Directory listing",
+ "path"
+),
+CMD_TBL_ITEM(
+ fatload, 5, 0, do_fat_rw,
+ "load binary file from a dos filesystem",
+ "<d:/path/filename> <addr> [bytes [pos]]\n"
+ " - Load binary file 'path/filename' on logical drive 'd'\n"
+ " to address 'addr' from dos filesystem.\n"
+ " 'pos' gives the file position to start loading from.\n"
+ " If 'pos' is omitted, 0 is used. 'pos' requires 'bytes'.\n"
+ " 'bytes' gives the size to load. If 'bytes' is 0 or omitted,\n"
+ " the load stops on end of file."
+),
+CMD_TBL_ITEM(
+ fatwrite, 4, 0, do_fat_rw,
+ "write file into a dos filesystem",
+ "<d:/path/filename> <addr> <bytes>\n"
+ " - Write file to 'path/filename' on logical drive 'd' from RAM\n"
+ " starting at address 'addr'. 'bytes' gives the size to load.\n"
+ " If 'bytes' is 0 or omitted, the load stops on end of file."
+),
CMD_TBL_ITEM(
help, CONFIG_SYS_MAXARGS, 1, do_help,
projects / z180-stamp.git / blobdiff