+/*
+ * (C) Copyright 2014 Leo C. <erbl259-lmu@yahoo.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
#include "common.h"
-
#include "command.h"
#include "cmd_mem.h"
-
extern command_ret_t do_help(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_echo(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_sleep(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_env_print(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_env_default(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_env_set(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_loadf(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_go(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_restart(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_console(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_dump_mem(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_eep_cp(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_busreq_pulse(cmd_tbl_t *, int, int, char * const []);
extern command_ret_t do_date(cmd_tbl_t *, int, int, char * const []);
-//extern command_ret_t do_clock(cmd_tbl_t *, int, int, char * const []);
-//extern command_ret_t do_clock2(cmd_tbl_t *, int, int, char * const []);
-extern command_ret_t do_pin(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_gpio(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_sd(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_fat_stat(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_fat_ls(cmd_tbl_t *, int, int, char * const []);
+//extern command_ret_t do_fat_read(cmd_tbl_t *, int, int, char * const []);
+//extern command_ret_t do_fat_write(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_fat_rw(cmd_tbl_t *, int, int, char * const []);
+
+#ifdef CONFIG_SYS_LONGHELP
+const FLASH char sd_help_text[] =
+ "bla \t- do bla\n"
+ ;
+#endif /* CONFIG_SYS_LONGHELP */
cmd_tbl_t cmd_tbl[] = {
),
#ifdef DEBUG
+
CMD_TBL_ITEM(
!mdr, 3, 1, do_dump_mem,
"RAM dump",
"[args..]\n"
" - echo args to console; \\c suppresses newline"
),
+CMD_TBL_ITEM(
+ sleep , 2, 1, do_sleep,
+ "delay execution for some time",
+ "N[m][s]\n"
+ " - delay execution for decimal N (milli) seconds"
+),
CMD_TBL_ITEM_COMPLETE(
run, CONFIG_SYS_MAXARGS, 1, do_run,
"run commands in an environment variable",
""
),
CMD_TBL_ITEM(
- restart, 1, 0, do_restart,
+ restart, 1, 1, do_restart,
"Perform RESET of the CPU",
""
),
-
-#if 0
-CMD_TBL_ITEM(
- clock, 2, 0, do_clock,
- "Set or get CPU frequency",
- "\n"
- " - print frequency or state of clock pin\n"
- "clock value[K|M]\n"
- " - set frequency of clock pin to value\n"
- "clock [high|low]\n"
- " - set clock pin level high or low"
-),
CMD_TBL_ITEM(
- clk2, 3, 0, do_clock2,
- "Set or get clk2 frequency",
- "\n"
- " - print frequency or state of clk2 pin\n"
- "clk2 [-d] value[K|M]\n"
- " - set frequency of clk2 pin to value\n"
- "clk2 [high|low]\n"
- " - set clk2 pin level high or low"
+ connect, 1, 1, do_console,
+ "Connect to CPU console i/o",
+ ""
),
-#endif
CMD_TBL_ITEM(
- pin, CONFIG_SYS_MAXARGS, 0, do_pin,
- "Set or get pin state",
- "[-s][pins]\n"
+ pin, CONFIG_SYS_MAXARGS, 1, do_gpio,
+ "Set or query pin state",
+ "[-s] [<pins>]\n"
" - print cofiguration and state or frequency of pins\n"
" print all pins, if argument is omitted\n"
- "pin pins [h[igh]]|[l[ow]]\n"
+ "pin <pins> h[igh]|l[ow]\n"
" - config pins as output and set to level high or low\n"
- "pin pins [ts]|[i[n]]|[p[ullup]]\n"
+ "pin <pins> ts|i[n]|p[ullup]\n"
" - config pins as input/tristate or input with pullup\n"
- "pin pins value[K|M][Hz]\n"
+ "pin <pins> value[K|M][Hz]\n"
" - output a clock on pins\n"
" value is system clock divider or frequency, if 'Hz' is appended\n"
" divider is rounded down to next possible value (depends on pin)\n"
"\n"
- "pins is a comma separated list of numbers or ranges, i.e. \"0,9,3-6\"\n"
+ "<pins> is a comma separated list of numbers or ranges, i.e. \"0,9,3-6\"\n"
),
CMD_TBL_ITEM(
"addr1 addr2 count"
),
CMD_TBL_ITEM(
- base, 2, 1, do_mem_base,
+ base, 2, 0, do_mem_base,
"print or set address offset",
"\n"
" - print address offset for memory commands\n"
),
#endif /* CONFIG_MX_CYCLIC */
+CMD_TBL_ITEM(
+ sd, CONFIG_SYS_MAXARGS, 1, do_sd,
+ "SD/MMC card handling commands",
+ "<subcommand> args ...\n"
+ "sd help\n"
+ " - print help on subcommands"
+),
+
+CMD_TBL_ITEM(
+ fatstat, 2, 1, do_fat_stat,
+ "Show logical drive status",
+ "dev"
+),
+CMD_TBL_ITEM(
+ fatls, 2, 1, do_fat_ls,
+ "Directory listing",
+ "path"
+),
+CMD_TBL_ITEM(
+ fatload, 5, 0, do_fat_rw,
+ "load binary file from a dos filesystem",
+ "<d:/path/filename> <addr> [bytes [pos]]\n"
+ " - Load binary file 'path/filename' on logical drive 'd'\n"
+ " to address 'addr' from dos filesystem.\n"
+ " 'pos' gives the file position to start loading from.\n"
+ " If 'pos' is omitted, 0 is used. 'pos' requires 'bytes'.\n"
+ " 'bytes' gives the size to load. If 'bytes' is 0 or omitted,\n"
+ " the load stops on end of file."
+),
+CMD_TBL_ITEM(
+ fatwrite, 4, 0, do_fat_rw,
+ "write file into a dos filesystem",
+ "<d:/path/filename> <addr> <bytes>\n"
+ " - Write file to 'path/filename' on logical drive 'd' from RAM\n"
+ " starting at address 'addr'. 'bytes' gives the size to load.\n"
+ " If 'bytes' is 0 or omitted, the load stops on end of file."
+),
CMD_TBL_ITEM(
help, CONFIG_SYS_MAXARGS, 1, do_help,
projects / z180-stamp.git / blobdiff