-<tr><td>CTRL_SYNC</td><td>Make sure that the device has finished pending write process. If the disk I/O module has a write back cache, the dirty buffers must be written back to the media immediately. Nothing to do for this command if each write operation to the media is completed within the <tt>disk_write()</tt> function. Required at <tt>_FS_READONLY == 0</tt>.</td></tr>\r
-<tr><td>GET_SECTOR_COUNT</td><td>Returns number of available sectors on the drive into the <tt>DWORD</tt> variable pointed by <tt class="arg">buff</tt>. This command is used by only <tt>f_mkfs()</tt> and <tt>f_fdisk()</tt> function to determine the volume/partition size to be created. Required at <tt>_USE_MKFS == 1</tt> or <tt>_MULTI_PARTITION == 1</tt>.</td></tr>\r
-<tr><td>GET_SECTOR_SIZE</td><td>Returns sector size of the media into the <tt>WORD</tt> variable pointed by <tt class="arg">buff</tt>. Valid return values of this command are 512, 1024, 2048 or 4096. This command is required at variable sector size configuration, <tt>_MAX_SS > _MIN_SS</tt>. Never used at fixed sector size configuration, <tt>_MAX_SS == _MIN_SS</tt>, and it must work at that sector size.</td></tr>\r
-<tr><td>GET_BLOCK_SIZE</td><td>Returns erase block size of the flash memory in unit of sector into the <tt>DWORD</tt> variable pointed by <tt class="arg">buff</tt>. The allowable value is from 1 to 32768 in power of 2. Return 1 if the erase block size is unknown or disk media. This command is used by only <tt>f_mkfs()</tt> function and it attempts to align data area to the erase block boundary. Required at <tt>_USE_MKFS == 1</tt>.</td></tr>\r
-<tr><td>CTRL_ERASE_SECTOR</td><td>Informs device that the data on the block of sectors specified by a <tt>DWORD</tt> array {<start sector>, <end sector>} pointed by <tt class="arg">buff</tt> is no longer needed and may be erased. The device would force erased the memory block. This is a command similar to Trim command of ATA device. When this feature is not supported or not a flash memory media, nothing to do for this command. The FatFs does not check the result code and the file function is not affected even if the sectors ware not erased well. This command is called on removing a cluster chain and <tt>f_mkfs()</tt> function. Required at <tt>_USE_ERASE == 1</tt>.</td></tr>\r
+<tr><td>CTRL_SYNC</td><td>Make sure that the device has finished pending write process. If the disk I/O module has a write back cache, the dirty buffers must be written back to the media immediately. Nothing to do for this command if each write operation to the media is completed within the <tt>disk_write</tt> function.</td></tr>\r
+<tr><td>GET_SECTOR_COUNT</td><td>Returns number of available sectors on the drive into the <tt>DWORD</tt> variable pointed by <tt class="arg">buff</tt>. This command is used by only <tt>f_mkfs</tt> and <tt>f_fdisk</tt> function to determine the volume/partition size to be created. Required at <tt>_USE_MKFS == 1</tt> or <tt>_MULTI_PARTITION == 1</tt>.</td></tr>\r
+<tr><td>GET_SECTOR_SIZE</td><td>Returns sector size of the media into the <tt>WORD</tt> variable pointed by <tt class="arg">buff</tt>. Valid return values of this command are 512, 1024, 2048 and 4096. This command is required only at variable sector size configuration, <tt>_MAX_SS > _MIN_SS</tt>. At fixed sector size configuration, <tt>_MAX_SS == _MIN_SS</tt>, this command is not used and the device must work at that sector size.</td></tr>\r
+<tr><td>GET_BLOCK_SIZE</td><td>Returns erase block size of the flash memory media in unit of sector into the <tt>DWORD</tt> variable pointed by <tt class="arg">buff</tt>. The allowable value is from 1 to 32768 in power of 2. Return 1 if the erase block size is unknown or non flash memory media. This command is used by only <tt>f_mkfs</tt> function and it attempts to align data area to the erase block boundary. Required at <tt>_USE_MKFS == 1</tt>.</td></tr>\r
+<tr><td>CTRL_TRIM</td><td>Informs the device the data on the block of sectors that specified by <tt>DWORD</tt> array {<start sector>, <end sector>} pointed by <tt class="arg">buff</tt> is no longer needed and it may be erased. This is an identical command to Trim of ATA device. Nothing to do for this command if this funcion is not supported or not a flash memory device. The FatFs does not check the result code and the file function is not affected even if the sector block was not erased well. This command is called on remove a cluster chain and in the <tt>f_mkfs</tt> function. Required at <tt>_USE_TRIM == 1</tt>.</td></tr>\r