/*---------------------------------------------------------------------------/\r
-/ FatFs - FAT file system module configuration file R0.10b (C)ChaN, 2014\r
+/ FatFs - FAT file system module configuration file\r
/---------------------------------------------------------------------------*/\r
\r
-#ifndef _FFCONF\r
-#define _FFCONF 8051 /* Revision ID */\r
-\r
+#define _FFCONF 68020 /* Revision ID */\r
\r
/*---------------------------------------------------------------------------/\r
-/ Functions and Buffer Configurations\r
+/ Function Configurations\r
/---------------------------------------------------------------------------*/\r
\r
-#define _FS_TINY 0 /* 0:Normal or 1:Tiny */\r
-/* When _FS_TINY is set to 1, it reduces memory consumption _MAX_SS bytes each\r
-/ file object. For file data transfer, FatFs uses the common sector buffer in\r
-/ the file system object (FATFS) instead of private sector buffer eliminated\r
-/ from the file object (FIL). */\r
-\r
+#define _FS_READONLY 0\r
+/* This option switches read-only configuration. (0:Read/Write or 1:Read-only)\r
+/ Read-only configuration removes writing API functions, f_write(), f_sync(),\r
+/ f_unlink(), f_mkdir(), f_chmod(), f_rename(), f_truncate(), f_getfree()\r
+/ and optional writing functions as well. */\r
\r
-#define _FS_READONLY 0 /* 0:Read/Write or 1:Read only */\r
-/* Setting _FS_READONLY to 1 defines read only configuration. This removes\r
-/ writing functions, f_write(), f_sync(), f_unlink(), f_mkdir(), f_chmod(),\r
-/ f_rename(), f_truncate() and useless f_getfree(). */\r
\r
-\r
-#define _FS_MINIMIZE 0 /* 0 to 3 */\r
-/* The _FS_MINIMIZE option defines minimization level to remove API functions.\r
+#define _FS_MINIMIZE 0\r
+/* This option defines minimization level to remove some basic API functions.\r
/\r
/ 0: All basic functions are enabled.\r
-/ 1: f_stat(), f_getfree(), f_unlink(), f_mkdir(), f_chmod(), f_utime(),\r
-/ f_truncate() and f_rename() function are removed.\r
+/ 1: f_stat(), f_getfree(), f_unlink(), f_mkdir(), f_truncate() and f_rename()\r
+/ are removed.\r
/ 2: f_opendir(), f_readdir() and f_closedir() are removed in addition to 1.\r
/ 3: f_lseek() function is removed in addition to 2. */\r
\r
\r
-#define _USE_STRFUNC 0 /* 0:Disable or 1-2:Enable */\r
-/* To enable string functions, set _USE_STRFUNC to 1 or 2. */\r
+#define _USE_STRFUNC 0\r
+/* This option switches string functions, f_gets(), f_putc(), f_puts() and\r
+/ f_printf().\r
+/\r
+/ 0: Disable string functions.\r
+/ 1: Enable without LF-CRLF conversion.\r
+/ 2: Enable with LF-CRLF conversion. */\r
+\r
+\r
+#define _USE_FIND 0\r
+/* This option switches filtered directory read functions, f_findfirst() and\r
+/ f_findnext(). (0:Disable, 1:Enable 2:Enable with matching altname[] too) */\r
+\r
+\r
+#define _USE_MKFS 0\r
+/* This option switches f_mkfs() function. (0:Disable or 1:Enable) */\r
\r
\r
-#define _USE_MKFS 0 /* 0:Disable or 1:Enable */\r
-/* To enable f_mkfs() function, set _USE_MKFS to 1 and set _FS_READONLY to 0 */\r
+#define _USE_FASTSEEK 0\r
+/* This option switches fast seek function. (0:Disable or 1:Enable) */\r
\r
\r
-#define _USE_FASTSEEK 0 /* 0:Disable or 1:Enable */\r
-/* To enable fast seek feature, set _USE_FASTSEEK to 1. */\r
+#define _USE_EXPAND 0\r
+/* This option switches f_expand function. (0:Disable or 1:Enable) */\r
\r
\r
-#define _USE_LABEL 0 /* 0:Disable or 1:Enable */\r
-/* To enable volume label functions, set _USE_LAVEL to 1 */\r
+#define _USE_CHMOD 0\r
+/* This option switches attribute manipulation functions, f_chmod() and f_utime().\r
+/ (0:Disable or 1:Enable) Also _FS_READONLY needs to be 0 to enable this option. */\r
\r
\r
-#define _USE_FORWARD 0 /* 0:Disable or 1:Enable */\r
-/* To enable f_forward() function, set _USE_FORWARD to 1 and set _FS_TINY to 1. */\r
+#define _USE_LABEL 0\r
+/* This option switches volume label functions, f_getlabel() and f_setlabel().\r
+/ (0:Disable or 1:Enable) */\r
+\r
+\r
+#define _USE_FORWARD 0\r
+/* This option switches f_forward() function. (0:Disable or 1:Enable) */\r
\r
\r
/*---------------------------------------------------------------------------/\r
/---------------------------------------------------------------------------*/\r
\r
#define _CODE_PAGE 932\r
-/* The _CODE_PAGE specifies the OEM code page to be used on the target system.\r
+/* This option specifies the OEM code page to be used on the target system.\r
/ Incorrect setting of the code page can cause a file open failure.\r
/\r
-/ 932 - Japanese Shift_JIS (DBCS, OEM, Windows)\r
-/ 936 - Simplified Chinese GBK (DBCS, OEM, Windows)\r
-/ 949 - Korean (DBCS, OEM, Windows)\r
-/ 950 - Traditional Chinese Big5 (DBCS, OEM, Windows)\r
-/ 1250 - Central Europe (Windows)\r
-/ 1251 - Cyrillic (Windows)\r
-/ 1252 - Latin 1 (Windows)\r
-/ 1253 - Greek (Windows)\r
-/ 1254 - Turkish (Windows)\r
-/ 1255 - Hebrew (Windows)\r
-/ 1256 - Arabic (Windows)\r
-/ 1257 - Baltic (Windows)\r
-/ 1258 - Vietnam (OEM, Windows)\r
-/ 437 - U.S. (OEM)\r
-/ 720 - Arabic (OEM)\r
-/ 737 - Greek (OEM)\r
-/ 775 - Baltic (OEM)\r
-/ 850 - Multilingual Latin 1 (OEM)\r
-/ 858 - Multilingual Latin 1 + Euro (OEM)\r
-/ 852 - Latin 2 (OEM)\r
-/ 855 - Cyrillic (OEM)\r
-/ 866 - Russian (OEM)\r
-/ 857 - Turkish (OEM)\r
-/ 862 - Hebrew (OEM)\r
-/ 874 - Thai (OEM, Windows)\r
-/ 1 - ASCII (Valid for only non-LFN configuration) */\r
-\r
-\r
-#define _USE_LFN 0 /* 0 to 3 */\r
-#define _MAX_LFN 255 /* Maximum LFN length to handle (12 to 255) */\r
-/* The _USE_LFN option switches the LFN feature.\r
+/ 1 - ASCII (No extended character. Non-LFN cfg. only)\r
+/ 437 - U.S.\r
+/ 720 - Arabic\r
+/ 737 - Greek\r
+/ 771 - KBL\r
+/ 775 - Baltic\r
+/ 850 - Latin 1\r
+/ 852 - Latin 2\r
+/ 855 - Cyrillic\r
+/ 857 - Turkish\r
+/ 860 - Portuguese\r
+/ 861 - Icelandic\r
+/ 862 - Hebrew\r
+/ 863 - Canadian French\r
+/ 864 - Arabic\r
+/ 865 - Nordic\r
+/ 866 - Russian\r
+/ 869 - Greek 2\r
+/ 932 - Japanese (DBCS)\r
+/ 936 - Simplified Chinese (DBCS)\r
+/ 949 - Korean (DBCS)\r
+/ 950 - Traditional Chinese (DBCS)\r
+*/\r
+\r
+\r
+#define _USE_LFN 0\r
+#define _MAX_LFN 255\r
+/* The _USE_LFN switches the support of long file name (LFN).\r
/\r
-/ 0: Disable LFN feature. _MAX_LFN has no effect.\r
+/ 0: Disable support of LFN. _MAX_LFN has no effect.\r
/ 1: Enable LFN with static working buffer on the BSS. Always NOT thread-safe.\r
/ 2: Enable LFN with dynamic working buffer on the STACK.\r
/ 3: Enable LFN with dynamic working buffer on the HEAP.\r
/\r
-/ When enable LFN feature, Unicode handling functions ff_convert() and ff_wtoupper()\r
-/ function must be added to the project.\r
-/ The LFN working buffer occupies (_MAX_LFN + 1) * 2 bytes. When use stack for the\r
-/ working buffer, take care on stack overflow. When use heap memory for the working\r
-/ buffer, memory management functions, ff_memalloc() and ff_memfree(), must be added\r
-/ to the project. */\r
+/ To enable the LFN, Unicode handling functions (option/unicode.c) must be added\r
+/ to the project. The working buffer occupies (_MAX_LFN + 1) * 2 bytes and\r
+/ additional 608 bytes at exFAT enabled. _MAX_LFN can be in range from 12 to 255.\r
+/ It should be set 255 to support full featured LFN operations.\r
+/ When use stack for the working buffer, take care on stack overflow. When use heap\r
+/ memory for the working buffer, memory management functions, ff_memalloc() and\r
+/ ff_memfree(), must be added to the project. */\r
\r
\r
-#define _LFN_UNICODE 0 /* 0:ANSI/OEM or 1:Unicode */\r
-/* To switch the character encoding on the FatFs API (TCHAR) to Unicode, enable LFN\r
-/ feature and set _LFN_UNICODE to 1. This option affects behavior of string I/O\r
-/ functions. This option must be 0 when LFN feature is not enabled. */\r
+#define _LFN_UNICODE 0\r
+/* This option switches character encoding on the API. (0:ANSI/OEM or 1:UTF-16)\r
+/ To use Unicode string for the path name, enable LFN and set _LFN_UNICODE = 1.\r
+/ This option also affects behavior of string I/O functions. */\r
\r
\r
-#define _STRF_ENCODE 3 /* 0:ANSI/OEM, 1:UTF-16LE, 2:UTF-16BE, 3:UTF-8 */\r
-/* When Unicode API is enabled by _LFN_UNICODE option, this option selects the character\r
-/ encoding on the file to be read/written via string I/O functions, f_gets(), f_putc(),\r
-/ f_puts and f_printf(). This option has no effect when _LFN_UNICODE == 0. Note that\r
-/ FatFs supports only BMP. */\r
+#define _STRF_ENCODE 3\r
+/* When _LFN_UNICODE == 1, this option selects the character encoding ON THE FILE to\r
+/ be read/written via string I/O functions, f_gets(), f_putc(), f_puts and f_printf().\r
+/\r
+/ 0: ANSI/OEM\r
+/ 1: UTF-16LE\r
+/ 2: UTF-16BE\r
+/ 3: UTF-8\r
+/\r
+/ This option has no effect when _LFN_UNICODE == 0. */\r
\r
\r
-#define _FS_RPATH 0 /* 0 to 2 */\r
-/* The _FS_RPATH option configures relative path feature.\r
+#define _FS_RPATH 0\r
+/* This option configures support of relative path.\r
/\r
-/ 0: Disable relative path feature and remove related functions.\r
-/ 1: Enable relative path. f_chdrive() and f_chdir() function are available.\r
+/ 0: Disable relative path and remove related functions.\r
+/ 1: Enable relative path. f_chdir() and f_chdrive() are available.\r
/ 2: f_getcwd() function is available in addition to 1.\r
-/\r
-/ Note that output of the f_readdir() fnction is affected by this option. */\r
+*/\r
\r
\r
/*---------------------------------------------------------------------------/\r
/* Number of volumes (logical drives) to be used. */\r
\r
\r
-#define _STR_VOLUME_ID 0 /* 0:Use only 0-9 for drive ID, 1:Use strings for drive ID */\r
-#define _VOLUME_STRS "RAM","NAND","CF","SD1","SD2","USB1","USB2","USB3"\r
-/* When _STR_VOLUME_ID is set to 1, also pre-defined strings can be used as drive\r
-/ number in the path name. _VOLUME_STRS defines the drive ID strings for each logical\r
-/ drives. Number of items must be equal to _VOLUMES. Valid characters for the drive ID\r
-/ strings are: 0-9 and A-Z. */\r
+#define _STR_VOLUME_ID 0\r
+#define _VOLUME_STRS "RAM","NAND","CF","SD","SD2","USB","USB2","USB3"\r
+/* _STR_VOLUME_ID switches string support of volume ID.\r
+/ When _STR_VOLUME_ID is set to 1, also pre-defined strings can be used as drive\r
+/ number in the path name. _VOLUME_STRS defines the drive ID strings for each\r
+/ logical drives. Number of items must be equal to _VOLUMES. Valid characters for\r
+/ the drive ID strings are: A-Z and 0-9. */\r
\r
\r
-#define _MULTI_PARTITION 0 /* 0:Single partition, 1:Enable multiple partition */\r
-/* By default(0), each logical drive number is bound to the same physical drive number\r
-/ and only a FAT volume found on the physical drive is mounted. When it is set to 1,\r
-/ each logical drive number is bound to arbitrary drive/partition listed in VolToPart[].\r
-*/\r
+#define _MULTI_PARTITION 0\r
+/* This option switches support of multi-partition on a physical drive.\r
+/ By default (0), each logical drive number is bound to the same physical drive\r
+/ number and only an FAT volume found on the physical drive will be mounted.\r
+/ When multi-partition is enabled (1), each logical drive number can be bound to\r
+/ arbitrary physical drive and partition listed in the VolToPart[]. Also f_fdisk()\r
+/ funciton will be available. */\r
\r
\r
#define _MIN_SS 512\r
#define _MAX_SS 512\r
-/* These options configure the range of sector size to be supported. (512, 1024, 2048 or\r
-/ 4096) Always set both 512 for most systems, all memory card and harddisk. But a larger\r
-/ value may be required for on-board flash memory and some type of optical media.\r
-/ When _MAX_SS is larger than _MIN_SS, FatFs is configured to variable sector size and\r
-/ GET_SECTOR_SIZE command must be implemented to the disk_ioctl() function. */\r
+/* These options configure the range of sector size to be supported. (512, 1024,\r
+/ 2048 or 4096) Always set both 512 for most systems, all type of memory cards and\r
+/ harddisk. But a larger value may be required for on-board flash memory and some\r
+/ type of optical media. When _MAX_SS is larger than _MIN_SS, FatFs is configured\r
+/ to variable sector size and GET_SECTOR_SIZE command must be implemented to the\r
+/ disk_ioctl() function. */\r
\r
\r
-#define _USE_ERASE 0 /* 0:Disable or 1:Enable */\r
-/* To enable sector erase feature, set _USE_ERASE to 1. Also CTRL_ERASE_SECTOR command\r
-/ should be added to the disk_ioctl() function. */\r
+#define _USE_TRIM 0\r
+/* This option switches support of ATA-TRIM. (0:Disable or 1:Enable)\r
+/ To enable Trim function, also CTRL_TRIM command should be implemented to the\r
+/ disk_ioctl() function. */\r
\r
\r
-#define _FS_NOFSINFO 0 /* 0 to 3 */\r
-/* If you need to know correct free space on the FAT32 volume, set bit 0 of this option\r
-/ and f_getfree() function at first time after volume mount will force a full FAT scan.\r
-/ Bit 1 controls the last allocated cluster number as bit 0.\r
+#define _FS_NOFSINFO 0\r
+/* If you need to know correct free space on the FAT32 volume, set bit 0 of this\r
+/ option, and f_getfree() function at first time after volume mount will force\r
+/ a full FAT scan. Bit 1 controls the use of last allocated cluster number.\r
/\r
/ bit0=0: Use free cluster count in the FSINFO if available.\r
/ bit0=1: Do not trust free cluster count in the FSINFO.\r
/ System Configurations\r
/---------------------------------------------------------------------------*/\r
\r
-#define _FS_LOCK 0 /* 0:Disable or >=1:Enable */\r
-/* To enable file lock control feature, set _FS_LOCK to non-zero value.\r
-/ The value defines how many files/sub-directories can be opened simultaneously\r
-/ with file lock control. This feature uses bss _FS_LOCK * 12 bytes. */\r
-\r
-\r
-#define _FS_REENTRANT 0 /* 0:Disable or 1:Enable */\r
-#define _FS_TIMEOUT 1000 /* Timeout period in unit of time tick */\r
-#define _SYNC_t HANDLE /* O/S dependent sync object type. e.g. HANDLE, OS_EVENT*, ID, SemaphoreHandle_t and etc.. */\r
-/* The _FS_REENTRANT option switches the re-entrancy (thread safe) of the FatFs module.\r
+#define _FS_TINY 0\r
+/* This option switches tiny buffer configuration. (0:Normal or 1:Tiny)\r
+/ At the tiny configuration, size of file object (FIL) is reduced _MAX_SS bytes.\r
+/ Instead of private sector buffer eliminated from the file object, common sector\r
+/ buffer in the file system object (FATFS) is used for the file data transfer. */\r
+\r
+\r
+#define _FS_EXFAT 0\r
+/* This option switches support of exFAT file system. (0:Disable or 1:Enable)\r
+/ When enable exFAT, also LFN needs to be enabled. (_USE_LFN >= 1)\r
+/ Note that enabling exFAT discards C89 compatibility. */\r
+\r
+\r
+#define _FS_NORTC 0\r
+#define _NORTC_MON 1\r
+#define _NORTC_MDAY 1\r
+#define _NORTC_YEAR 2016\r
+/* The option _FS_NORTC switches timestamp functiton. If the system does not have\r
+/ any RTC function or valid timestamp is not needed, set _FS_NORTC = 1 to disable\r
+/ the timestamp function. All objects modified by FatFs will have a fixed timestamp\r
+/ defined by _NORTC_MON, _NORTC_MDAY and _NORTC_YEAR in local time.\r
+/ To enable timestamp function (_FS_NORTC = 0), get_fattime() function need to be\r
+/ added to the project to get current time form real-time clock. _NORTC_MON,\r
+/ _NORTC_MDAY and _NORTC_YEAR have no effect. \r
+/ These options have no effect at read-only configuration (_FS_READONLY = 1). */\r
+\r
+\r
+#define _FS_LOCK 0\r
+/* The option _FS_LOCK switches file lock function to control duplicated file open\r
+/ and illegal operation to open objects. This option must be 0 when _FS_READONLY\r
+/ is 1.\r
+/\r
+/ 0: Disable file lock function. To avoid volume corruption, application program\r
+/ should avoid illegal open, remove and rename to the open objects.\r
+/ >0: Enable file lock function. The value defines how many files/sub-directories\r
+/ can be opened simultaneously under file lock control. Note that the file\r
+/ lock control is independent of re-entrancy. */\r
+\r
+\r
+#define _FS_REENTRANT 0\r
+#define _FS_TIMEOUT 1000\r
+#define _SYNC_t HANDLE\r
+/* The option _FS_REENTRANT switches the re-entrancy (thread safe) of the FatFs\r
+/ module itself. Note that regardless of this option, file access to different\r
+/ volume is always re-entrant and volume control functions, f_mount(), f_mkfs()\r
+/ and f_fdisk() function, are always not re-entrant. Only file/directory access\r
+/ to the same volume is under control of this function.\r
/\r
/ 0: Disable re-entrancy. _FS_TIMEOUT and _SYNC_t have no effect.\r
/ 1: Enable re-entrancy. Also user provided synchronization handlers,\r
/ ff_req_grant(), ff_rel_grant(), ff_del_syncobj() and ff_cre_syncobj()\r
-/ function must be added to the project.\r
-*/\r
-\r
-\r
-#define _WORD_ACCESS 0 /* 0 or 1 */\r
-/* The _WORD_ACCESS option is an only platform dependent option. It defines\r
-/ which access method is used to the word data on the FAT volume.\r
-/\r
-/ 0: Byte-by-byte access. Always compatible with all platforms.\r
-/ 1: Word access. Do not choose this unless under both the following conditions.\r
-/\r
-/ * Address misaligned memory access is always allowed for ALL instructions.\r
-/ * Byte order on the memory is little-endian.\r
+/ function, must be added to the project. Samples are available in\r
+/ option/syscall.c.\r
/\r
-/ If it is the case, _WORD_ACCESS can also be set to 1 to improve performance and\r
-/ reduce code size. Following table shows an example of some processor types.\r
-/\r
-/ ARM7TDMI 0 ColdFire 0 V850E 0\r
-/ Cortex-M3 0 Z80 0/1 V850ES 0/1\r
-/ Cortex-M0 0 RX600(LE) 0/1 TLCS-870 0/1\r
-/ AVR 0/1 RX600(BE) 0 TLCS-900 0/1\r
-/ AVR32 0 RL78 0 R32C 0\r
-/ PIC18 0/1 SH-2 0 M16C 0/1\r
-/ PIC24 0 H8S 0 MSP430 0\r
-/ PIC32 0 H8/300H 0 x86 0/1\r
-*/\r
+/ The _FS_TIMEOUT defines timeout period in unit of time tick.\r
+/ The _SYNC_t defines O/S dependent sync object type. e.g. HANDLE, ID, OS_EVENT*,\r
+/ SemaphoreHandle_t and etc.. A header file for O/S definitions needs to be\r
+/ included somewhere in the scope of ff.h. */\r
+\r
+/* #include <windows.h> // O/S definitions */\r
\r
\r
-#endif /* _FFCONF */\r
+/*--- End of configuration options ---*/\r
projects / z180-stamp.git / blobdiff