+++ /dev/null
-/*---------------------------------------------------------------------------/\r
-/ FatFs - FAT file system module configuration file\r
-/---------------------------------------------------------------------------*/\r
-\r
-#define _FFCONF 68020 /* Revision ID */\r
-\r
-/*---------------------------------------------------------------------------/\r
-/ Function Configurations\r
-/---------------------------------------------------------------------------*/\r
-\r
-#define _FS_READONLY 0\r
-/* This option switches read-only configuration. (0:Read/Write or 1:Read-only)\r
-/ Read-only configuration removes writing API functions, f_write(), f_sync(),\r
-/ f_unlink(), f_mkdir(), f_chmod(), f_rename(), f_truncate(), f_getfree()\r
-/ and optional writing functions as well. */\r
-\r
-\r
-#define _FS_MINIMIZE 0\r
-/* This option defines minimization level to remove some basic API functions.\r
-/\r
-/ 0: All basic functions are enabled.\r
-/ 1: f_stat(), f_getfree(), f_unlink(), f_mkdir(), f_truncate() and f_rename()\r
-/ are removed.\r
-/ 2: f_opendir(), f_readdir() and f_closedir() are removed in addition to 1.\r
-/ 3: f_lseek() function is removed in addition to 2. */\r
-\r
-\r
-#define _USE_STRFUNC 0\r
-/* This option switches string functions, f_gets(), f_putc(), f_puts() and\r
-/ f_printf().\r
-/\r
-/ 0: Disable string functions.\r
-/ 1: Enable without LF-CRLF conversion.\r
-/ 2: Enable with LF-CRLF conversion. */\r
-\r
-\r
-#define _USE_FIND 0\r
-/* This option switches filtered directory read functions, f_findfirst() and\r
-/ f_findnext(). (0:Disable, 1:Enable 2:Enable with matching altname[] too) */\r
-\r
-\r
-#define _USE_MKFS 0\r
-/* This option switches f_mkfs() function. (0:Disable or 1:Enable) */\r
-\r
-\r
-#define _USE_FASTSEEK 0\r
-/* This option switches fast seek function. (0:Disable or 1:Enable) */\r
-\r
-\r
-#define _USE_EXPAND 0\r
-/* This option switches f_expand function. (0:Disable or 1:Enable) */\r
-\r
-\r
-#define _USE_CHMOD 0\r
-/* This option switches attribute manipulation functions, f_chmod() and f_utime().\r
-/ (0:Disable or 1:Enable) Also _FS_READONLY needs to be 0 to enable this option. */\r
-\r
-\r
-#define _USE_LABEL 0\r
-/* This option switches volume label functions, f_getlabel() and f_setlabel().\r
-/ (0:Disable or 1:Enable) */\r
-\r
-\r
-#define _USE_FORWARD 0\r
-/* This option switches f_forward() function. (0:Disable or 1:Enable) */\r
-\r
-\r
-/*---------------------------------------------------------------------------/\r
-/ Locale and Namespace Configurations\r
-/---------------------------------------------------------------------------*/\r
-\r
-#define _CODE_PAGE 932\r
-/* This option specifies the OEM code page to be used on the target system.\r
-/ Incorrect setting of the code page can cause a file open failure.\r
-/\r
-/ 1 - ASCII (No extended character. Non-LFN cfg. only)\r
-/ 437 - U.S.\r
-/ 720 - Arabic\r
-/ 737 - Greek\r
-/ 771 - KBL\r
-/ 775 - Baltic\r
-/ 850 - Latin 1\r
-/ 852 - Latin 2\r
-/ 855 - Cyrillic\r
-/ 857 - Turkish\r
-/ 860 - Portuguese\r
-/ 861 - Icelandic\r
-/ 862 - Hebrew\r
-/ 863 - Canadian French\r
-/ 864 - Arabic\r
-/ 865 - Nordic\r
-/ 866 - Russian\r
-/ 869 - Greek 2\r
-/ 932 - Japanese (DBCS)\r
-/ 936 - Simplified Chinese (DBCS)\r
-/ 949 - Korean (DBCS)\r
-/ 950 - Traditional Chinese (DBCS)\r
-*/\r
-\r
-\r
-#define _USE_LFN 0\r
-#define _MAX_LFN 255\r
-/* The _USE_LFN switches the support of long file name (LFN).\r
-/\r
-/ 0: Disable support of LFN. _MAX_LFN has no effect.\r
-/ 1: Enable LFN with static working buffer on the BSS. Always NOT thread-safe.\r
-/ 2: Enable LFN with dynamic working buffer on the STACK.\r
-/ 3: Enable LFN with dynamic working buffer on the HEAP.\r
-/\r
-/ To enable the LFN, Unicode handling functions (option/unicode.c) must be added\r
-/ to the project. The working buffer occupies (_MAX_LFN + 1) * 2 bytes and\r
-/ additional 608 bytes at exFAT enabled. _MAX_LFN can be in range from 12 to 255.\r
-/ It should be set 255 to support full featured LFN operations.\r
-/ When use stack for the working buffer, take care on stack overflow. When use heap\r
-/ memory for the working buffer, memory management functions, ff_memalloc() and\r
-/ ff_memfree(), must be added to the project. */\r
-\r
-\r
-#define _LFN_UNICODE 0\r
-/* This option switches character encoding on the API. (0:ANSI/OEM or 1:UTF-16)\r
-/ To use Unicode string for the path name, enable LFN and set _LFN_UNICODE = 1.\r
-/ This option also affects behavior of string I/O functions. */\r
-\r
-\r
-#define _STRF_ENCODE 3\r
-/* When _LFN_UNICODE == 1, this option selects the character encoding ON THE FILE to\r
-/ be read/written via string I/O functions, f_gets(), f_putc(), f_puts and f_printf().\r
-/\r
-/ 0: ANSI/OEM\r
-/ 1: UTF-16LE\r
-/ 2: UTF-16BE\r
-/ 3: UTF-8\r
-/\r
-/ This option has no effect when _LFN_UNICODE == 0. */\r
-\r
-\r
-#define _FS_RPATH 0\r
-/* This option configures support of relative path.\r
-/\r
-/ 0: Disable relative path and remove related functions.\r
-/ 1: Enable relative path. f_chdir() and f_chdrive() are available.\r
-/ 2: f_getcwd() function is available in addition to 1.\r
-*/\r
-\r
-\r
-/*---------------------------------------------------------------------------/\r
-/ Drive/Volume Configurations\r
-/---------------------------------------------------------------------------*/\r
-\r
-#define _VOLUMES 1\r
-/* Number of volumes (logical drives) to be used. */\r
-\r
-\r
-#define _STR_VOLUME_ID 0\r
-#define _VOLUME_STRS "RAM","NAND","CF","SD","SD2","USB","USB2","USB3"\r
-/* _STR_VOLUME_ID switches string support of volume ID.\r
-/ When _STR_VOLUME_ID is set to 1, also pre-defined strings can be used as drive\r
-/ number in the path name. _VOLUME_STRS defines the drive ID strings for each\r
-/ logical drives. Number of items must be equal to _VOLUMES. Valid characters for\r
-/ the drive ID strings are: A-Z and 0-9. */\r
-\r
-\r
-#define _MULTI_PARTITION 0\r
-/* This option switches support of multi-partition on a physical drive.\r
-/ By default (0), each logical drive number is bound to the same physical drive\r
-/ number and only an FAT volume found on the physical drive will be mounted.\r
-/ When multi-partition is enabled (1), each logical drive number can be bound to\r
-/ arbitrary physical drive and partition listed in the VolToPart[]. Also f_fdisk()\r
-/ funciton will be available. */\r
-\r
-\r
-#define _MIN_SS 512\r
-#define _MAX_SS 512\r
-/* These options configure the range of sector size to be supported. (512, 1024,\r
-/ 2048 or 4096) Always set both 512 for most systems, all type of memory cards and\r
-/ harddisk. But a larger value may be required for on-board flash memory and some\r
-/ type of optical media. When _MAX_SS is larger than _MIN_SS, FatFs is configured\r
-/ to variable sector size and GET_SECTOR_SIZE command must be implemented to the\r
-/ disk_ioctl() function. */\r
-\r
-\r
-#define _USE_TRIM 0\r
-/* This option switches support of ATA-TRIM. (0:Disable or 1:Enable)\r
-/ To enable Trim function, also CTRL_TRIM command should be implemented to the\r
-/ disk_ioctl() function. */\r
-\r
-\r
-#define _FS_NOFSINFO 0\r
-/* If you need to know correct free space on the FAT32 volume, set bit 0 of this\r
-/ option, and f_getfree() function at first time after volume mount will force\r
-/ a full FAT scan. Bit 1 controls the use of last allocated cluster number.\r
-/\r
-/ bit0=0: Use free cluster count in the FSINFO if available.\r
-/ bit0=1: Do not trust free cluster count in the FSINFO.\r
-/ bit1=0: Use last allocated cluster number in the FSINFO if available.\r
-/ bit1=1: Do not trust last allocated cluster number in the FSINFO.\r
-*/\r
-\r
-\r
-\r
-/*---------------------------------------------------------------------------/\r
-/ System Configurations\r
-/---------------------------------------------------------------------------*/\r
-\r
-#define _FS_TINY 0\r
-/* This option switches tiny buffer configuration. (0:Normal or 1:Tiny)\r
-/ At the tiny configuration, size of file object (FIL) is reduced _MAX_SS bytes.\r
-/ Instead of private sector buffer eliminated from the file object, common sector\r
-/ buffer in the file system object (FATFS) is used for the file data transfer. */\r
-\r
-\r
-#define _FS_EXFAT 0\r
-/* This option switches support of exFAT file system. (0:Disable or 1:Enable)\r
-/ When enable exFAT, also LFN needs to be enabled. (_USE_LFN >= 1)\r
-/ Note that enabling exFAT discards C89 compatibility. */\r
-\r
-\r
-#define _FS_NORTC 0\r
-#define _NORTC_MON 1\r
-#define _NORTC_MDAY 1\r
-#define _NORTC_YEAR 2016\r
-/* The option _FS_NORTC switches timestamp functiton. If the system does not have\r
-/ any RTC function or valid timestamp is not needed, set _FS_NORTC = 1 to disable\r
-/ the timestamp function. All objects modified by FatFs will have a fixed timestamp\r
-/ defined by _NORTC_MON, _NORTC_MDAY and _NORTC_YEAR in local time.\r
-/ To enable timestamp function (_FS_NORTC = 0), get_fattime() function need to be\r
-/ added to the project to get current time form real-time clock. _NORTC_MON,\r
-/ _NORTC_MDAY and _NORTC_YEAR have no effect. \r
-/ These options have no effect at read-only configuration (_FS_READONLY = 1). */\r
-\r
-\r
-#define _FS_LOCK 0\r
-/* The option _FS_LOCK switches file lock function to control duplicated file open\r
-/ and illegal operation to open objects. This option must be 0 when _FS_READONLY\r
-/ is 1.\r
-/\r
-/ 0: Disable file lock function. To avoid volume corruption, application program\r
-/ should avoid illegal open, remove and rename to the open objects.\r
-/ >0: Enable file lock function. The value defines how many files/sub-directories\r
-/ can be opened simultaneously under file lock control. Note that the file\r
-/ lock control is independent of re-entrancy. */\r
-\r
-\r
-#define _FS_REENTRANT 0\r
-#define _FS_TIMEOUT 1000\r
-#define _SYNC_t HANDLE\r
-/* The option _FS_REENTRANT switches the re-entrancy (thread safe) of the FatFs\r
-/ module itself. Note that regardless of this option, file access to different\r
-/ volume is always re-entrant and volume control functions, f_mount(), f_mkfs()\r
-/ and f_fdisk() function, are always not re-entrant. Only file/directory access\r
-/ to the same volume is under control of this function.\r
-/\r
-/ 0: Disable re-entrancy. _FS_TIMEOUT and _SYNC_t have no effect.\r
-/ 1: Enable re-entrancy. Also user provided synchronization handlers,\r
-/ ff_req_grant(), ff_rel_grant(), ff_del_syncobj() and ff_cre_syncobj()\r
-/ function, must be added to the project. Samples are available in\r
-/ option/syscall.c.\r
-/\r
-/ The _FS_TIMEOUT defines timeout period in unit of time tick.\r
-/ The _SYNC_t defines O/S dependent sync object type. e.g. HANDLE, ID, OS_EVENT*,\r
-/ SemaphoreHandle_t and etc.. A header file for O/S definitions needs to be\r
-/ included somewhere in the scope of ff.h. */\r
-\r
-/* #include <windows.h> // O/S definitions */\r
-\r
-\r
-/*--- End of configuration options ---*/\r
projects / z180-stamp.git / blobdiff