#include "cmd_mem.h"
-extern int do_help(cmd_tbl_t *, int, int, char * const []);
-extern int do_echo(cmd_tbl_t *, int, int, char * const []);
-extern int do_env_print(cmd_tbl_t *, int, int, char * const []);
-extern int do_env_set(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_help(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_echo(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_sleep(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_env_print(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_env_default(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_env_set(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_env_save(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_loadf(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_go(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_restart(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_console(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_dump_mem(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_eep_cp(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_busreq_pulse(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_date(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_gpio(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_sd(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_fat_stat(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_fat_ls(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_fat_read(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_fat_write(cmd_tbl_t *, int, int, char * const []);
+
+#ifdef CONFIG_SYS_LONGHELP
+const FLASH char sd_help_text[] =
+ "bla \t- do bla\n"
+ ;
+#endif /* CONFIG_SYS_LONGHELP */
cmd_tbl_t cmd_tbl[] = {
+CMD_TBL_ITEM(
+ date, 2, 1, do_date,
+ "get/set/reset date & time",
+ "[MMDDhhmm[[CC]YY][.ss]]\ndate reset\n"
+ " - without arguments: print date & time\n"
+ " - with numeric argument: set the system date & time\n"
+ " - with 'reset' argument: reset the RTC"
+),
+
+#ifdef DEBUG
+CMD_TBL_ITEM(
+ !mdr, 3, 1, do_dump_mem,
+ "RAM dump",
+ "address [count]"
+),
+CMD_TBL_ITEM(
+ !mde, 3, 1, do_dump_mem,
+ "EEPROM dump",
+ "address [count]"
+),
+CMD_TBL_ITEM(
+ !cpe, 4, 0, do_eep_cp,
+ "EEPROM copy",
+ "source target count"
+),
+#endif
+CMD_TBL_ITEM(
+ mstep, 2, 1, do_busreq_pulse,
+ "execute one M cycle",
+ "[count]\n"
+ " - repeat count times"
+),
CMD_TBL_ITEM(
echo, CONFIG_SYS_MAXARGS, 1, do_echo,
"echo args to console",
"[args..]\n"
" - echo args to console; \\c suppresses newline"
),
+CMD_TBL_ITEM(
+ sleep , 2, 1, do_sleep,
+ "delay execution for some time",
+ "N[m][s]\n"
+ " - delay execution for decimal N (milli) seconds"
+),
CMD_TBL_ITEM_COMPLETE(
run, CONFIG_SYS_MAXARGS, 1, do_run,
"run commands in an environment variable",
printenv, CONFIG_SYS_MAXARGS, 1, do_env_print,
"print environment variables",
"\n"
- " - print [all] values of all environment variables\n"
+ " - print values of all environment variables\n"
"printenv name ...\n"
" - print value of environment variable 'name'",
var_complete
" - delete environment variable 'name'",
var_complete
),
+CMD_TBL_ITEM(
+ saveenv, 1, 0, do_env_save,
+ "save environment variables to persistent storage",
+ ""
+),
+CMD_TBL_ITEM(
+ defaultenv, 1, 0, do_env_default,
+ "set all environment variables to their default values",
+ ""
+),
+
+CMD_TBL_ITEM(
+ loadf, 1, 0, do_loadf,
+ "load srec_cat prepared image from controller flash",
+ ""
+),
+CMD_TBL_ITEM(
+ go, 2, 0, do_go,
+ "start application at address 'addr'",
+ "addr\n"
+ " - start application at address 'addr'"
+// "\n"
+// " passing 'arg' as arguments"
+),
+CMD_TBL_ITEM(
+ reset, 1, 0, do_reset,
+ "Keep CPU in RESET state",
+ ""
+),
+CMD_TBL_ITEM(
+ restart, 1, 1, do_restart,
+ "Perform RESET of the CPU",
+ ""
+),
+CMD_TBL_ITEM(
+ connect, 1, 1, do_console,
+ "Connect to CPU console i/o",
+ ""
+),
+
+CMD_TBL_ITEM(
+ pin, CONFIG_SYS_MAXARGS, 1, do_gpio,
+ "Set or query pin state",
+ "[-s] [<pins>]\n"
+ " - print cofiguration and state or frequency of pins\n"
+ " print all pins, if argument is omitted\n"
+ "pin <pins> h[igh]|l[ow]\n"
+ " - config pins as output and set to level high or low\n"
+ "pin <pins> ts|i[n]|p[ullup]\n"
+ " - config pins as input/tristate or input with pullup\n"
+ "pin <pins> value[K|M][Hz]\n"
+ " - output a clock on pins\n"
+ " value is system clock divider or frequency, if 'Hz' is appended\n"
+ " divider is rounded down to next possible value (depends on pin)\n"
+ "\n"
+ "<pins> is a comma separated list of numbers or ranges, i.e. \"0,9,3-6\"\n"
+),
CMD_TBL_ITEM(
md, 3, 1, do_mem_md,
"addr1 addr2 count"
),
CMD_TBL_ITEM(
- base, 2, 1, do_mem_base,
+ base, 2, 0, do_mem_base,
"print or set address offset",
"\n"
" - print address offset for memory commands\n"
),
#endif /* CONFIG_MX_CYCLIC */
+CMD_TBL_ITEM(
+ sd, CONFIG_SYS_MAXARGS, 1, do_sd,
+ "SD/MMC card handling commands",
+ "<subcommand> args ...\n"
+ "sd help\n"
+ " - print help on subcommands"
+),
+
+CMD_TBL_ITEM(
+ fatstat, 2, 1, do_fat_stat,
+ "Show logical drive status",
+ "dev"
+),
+CMD_TBL_ITEM(
+ fatls, 2, 1, do_fat_ls,
+ "Directory listing",
+ "path"
+),
+CMD_TBL_ITEM(
+ fatload, 5, 0, do_fat_read,
+ "load binary file from a dos filesystem",
+ "<d:/path/filename> <addr> [bytes [pos]]\n"
+ " - Load binary file 'path/filename' on logical drive 'd'\n"
+ " to address 'addr' from dos filesystem.\n"
+ " 'pos' gives the file position to start loading from.\n"
+ " If 'pos' is omitted, 0 is used. 'pos' requires 'bytes'.\n"
+ " 'bytes' gives the size to load. If 'bytes' is 0 or omitted,\n"
+ " the load stops on end of file."
+),
+CMD_TBL_ITEM(
+ fatwrite, 4, 0, do_fat_write,
+ "write file into a dos filesystem",
+ "<d:/path/filename> <addr> <bytes>\n"
+ " - write file 'filename' from the address 'addr' in RAM\n"
+ " to 'dev' on 'interface'"
+),
CMD_TBL_ITEM(
help, CONFIG_SYS_MAXARGS, 1, do_help,
projects / z180-stamp.git / blobdiff