SD slot 0: Enable card detection

[z180-stamp.git] / avr / command_tbl.c

diff --git a/avr/command_tbl.c b/avr/command_tbl.c
index 6e8a91b5fa67541221b42afb8816c10f3e3c86fb..a2f99da4a04d3f4e41bc4aabe541c4a4774cb4e1 100644 (file)
--- a/avr/command_tbl.c
+++ b/avr/command_tbl.c
@@ -1,12 +1,16 @@
+/*
+ * (C) Copyright 2014 Leo C. <erbl259-lmu@yahoo.de>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
 
 #include "common.h"
-
 #include "command.h"
 #include "cmd_mem.h"
 
-
 extern command_ret_t do_help(cmd_tbl_t *, int, int, char * const []);
 extern command_ret_t do_echo(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_sleep(cmd_tbl_t *, int, int, char * const []);
 extern command_ret_t do_env_print(cmd_tbl_t *, int, int, char * const []);
 extern command_ret_t do_env_default(cmd_tbl_t *, int, int, char * const []);
 extern command_ret_t do_env_set(cmd_tbl_t *, int, int, char * const []);
@@ -14,10 +18,24 @@ extern command_ret_t do_env_save(cmd_tbl_t *, int, int, char * const []);
 extern command_ret_t do_loadf(cmd_tbl_t *, int, int, char * const []);
 extern command_ret_t do_go(cmd_tbl_t *, int, int, char * const []);
 extern command_ret_t do_restart(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_console(cmd_tbl_t *, int, int, char * const []);
 extern command_ret_t do_dump_mem(cmd_tbl_t *, int, int, char * const []);
 extern command_ret_t do_eep_cp(cmd_tbl_t *, int, int, char * const []);
 extern command_ret_t do_busreq_pulse(cmd_tbl_t *, int, int, char * const []);
 extern command_ret_t do_date(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_gpio(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_sd(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_fat_stat(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_fat_ls(cmd_tbl_t *, int, int, char * const []);
+//extern command_ret_t do_fat_read(cmd_tbl_t *, int, int, char * const []);
+//extern command_ret_t do_fat_write(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_fat_rw(cmd_tbl_t *, int, int, char * const []);
+
+#ifdef CONFIG_SYS_LONGHELP
+const FLASH char sd_help_text[] =
+       "bla \t- do bla\n"
+       ;
+#endif /* CONFIG_SYS_LONGHELP */
 
 
 cmd_tbl_t cmd_tbl[] = {
@@ -32,6 +50,7 @@ CMD_TBL_ITEM(
 ),
 
 #ifdef DEBUG
+
 CMD_TBL_ITEM(
        !mdr,   3,      1,      do_dump_mem,
        "RAM dump",
@@ -60,6 +79,12 @@ CMD_TBL_ITEM(
        "[args..]\n"
        "     - echo args to console; \\c suppresses newline"
 ),
+CMD_TBL_ITEM(
+       sleep ,    2,    1,     do_sleep,
+       "delay execution for some time",
+       "N[m][s]\n"
+       "    - delay execution for decimal N (milli) seconds"
+),
 CMD_TBL_ITEM_COMPLETE(
        run,    CONFIG_SYS_MAXARGS,     1,      do_run,
        "run commands in an environment variable",
@@ -115,10 +140,33 @@ CMD_TBL_ITEM(
        ""
 ),
 CMD_TBL_ITEM(
-       restart, 1, 0,  do_restart,
+       restart, 1, 1,  do_restart,
        "Perform RESET of the CPU",
        ""
 ),
+CMD_TBL_ITEM(
+       connect, 1, 1,  do_console,
+       "Connect to CPU console i/o",
+       ""
+),
+
+CMD_TBL_ITEM(
+       pin, CONFIG_SYS_MAXARGS, 1,     do_gpio,
+       "Set or query pin state",
+       "[-s] [<pins>]\n"
+       "    - print cofiguration and state or frequency of pins\n"
+       "      print all pins, if argument is omitted\n"
+       "pin <pins> h[igh]|l[ow]\n"
+       "    - config pins as output and set to level high or low\n"
+       "pin <pins> ts|i[n]|p[ullup]\n"
+       "    - config pins as input/tristate or input with pullup\n"
+       "pin <pins> value[K|M][Hz]\n"
+       "    - output a clock on pins\n"
+       "      value is system clock divider or frequency, if 'Hz' is appended\n"
+       "      divider is rounded down to next possible value (depends on pin)\n"
+       "\n"
+       "<pins> is a comma separated list of numbers or ranges, i.e. \"0,9,3-6\"\n"
+),
 
 CMD_TBL_ITEM(
        md,     3,      1,      do_mem_md,
@@ -151,7 +199,7 @@ CMD_TBL_ITEM(
        "addr1 addr2 count"
 ),
 CMD_TBL_ITEM(
-       base,   2,      1,      do_mem_base,
+       base,   2,      0,      do_mem_base,
        "print or set address offset",
        "\n"
        "    - print address offset for memory commands\n"
@@ -192,6 +240,43 @@ CMD_TBL_ITEM(
 ),
 #endif /* CONFIG_MX_CYCLIC */
 
+CMD_TBL_ITEM(
+       sd,   CONFIG_SYS_MAXARGS, 1, do_sd,
+       "SD/MMC card handling commands",
+       "<subcommand> args ...\n"
+       "sd help\n"
+       "    - print help on subcommands"
+),
+
+CMD_TBL_ITEM(
+       fatstat,        2,      1,      do_fat_stat,
+       "Show logical drive status",
+       "dev"
+),
+CMD_TBL_ITEM(
+       fatls,  2,      1,      do_fat_ls,
+       "Directory listing",
+       "path"
+),
+CMD_TBL_ITEM(
+       fatload,        5,      0,      do_fat_rw,
+       "load binary file from a dos filesystem",
+       "<d:/path/filename> <addr> [bytes [pos]]\n"
+       "    - Load binary file 'path/filename' on logical drive 'd'\n"
+       "      to address 'addr' from dos filesystem.\n"
+       "      'pos' gives the file position to start loading from.\n"
+       "      If 'pos' is omitted, 0 is used. 'pos' requires 'bytes'.\n"
+       "      'bytes' gives the size to load. If 'bytes' is 0 or omitted,\n"
+       "      the load stops on end of file."
+),
+CMD_TBL_ITEM(
+       fatwrite,       4,      0,      do_fat_rw,
+       "write file into a dos filesystem",
+       "<d:/path/filename> <addr> <bytes>\n"
+       "    - Write file to 'path/filename' on logical drive 'd' from RAM\n"
+       "      starting at address 'addr'. 'bytes' gives the size to load.\n"
+       "      If 'bytes' is 0 or omitted, the load stops on end of file."
+),
 
 CMD_TBL_ITEM(
        help,   CONFIG_SYS_MAXARGS,     1,      do_help,