/*---------------------------------------------------------------------------/
-/ FatFs - FAT file system module configuration file
+/ FatFs - Configuration file
/---------------------------------------------------------------------------*/
-#define _FFCONF 68020 /* Revision ID */
+#define FFCONF_DEF 63463 /* Revision ID */
/*---------------------------------------------------------------------------/
/ Function Configurations
/---------------------------------------------------------------------------*/
-#define _FS_READONLY 0
+#define FF_FS_READONLY 0
/* This option switches read-only configuration. (0:Read/Write or 1:Read-only)
/ Read-only configuration removes writing API functions, f_write(), f_sync(),
/ f_unlink(), f_mkdir(), f_chmod(), f_rename(), f_truncate(), f_getfree()
/ and optional writing functions as well. */
-#define _FS_MINIMIZE 0
+#define FF_FS_MINIMIZE 0
/* This option defines minimization level to remove some basic API functions.
/
-/ 0: All basic functions are enabled.
+/ 0: Basic functions are fully enabled.
/ 1: f_stat(), f_getfree(), f_unlink(), f_mkdir(), f_truncate() and f_rename()
/ are removed.
/ 2: f_opendir(), f_readdir() and f_closedir() are removed in addition to 1.
/ 3: f_lseek() function is removed in addition to 2. */
-#define _USE_STRFUNC 2
-/* This option switches string functions, f_gets(), f_putc(), f_puts() and
-/ f_printf().
+#define FF_USE_STRFUNC 2
+/* This option switches string functions, f_gets(), f_putc(), f_puts() and f_printf().
/
/ 0: Disable string functions.
/ 1: Enable without LF-CRLF conversion.
/ 2: Enable with LF-CRLF conversion. */
-#define _USE_FIND 0
+#define FF_USE_FIND 0
/* This option switches filtered directory read functions, f_findfirst() and
/ f_findnext(). (0:Disable, 1:Enable 2:Enable with matching altname[] too) */
-#define _USE_MKFS 0
+#define FF_USE_MKFS 0
/* This option switches f_mkfs() function. (0:Disable or 1:Enable) */
-#define _USE_FASTSEEK 0
+#define FF_USE_FASTSEEK 0
/* This option switches fast seek function. (0:Disable or 1:Enable) */
-#define _USE_EXPAND 0
+#define FF_USE_EXPAND 0
/* This option switches f_expand function. (0:Disable or 1:Enable) */
-#define _USE_CHMOD 0
+#define FF_USE_CHMOD 0
/* This option switches attribute manipulation functions, f_chmod() and f_utime().
-/ (0:Disable or 1:Enable) Also _FS_READONLY needs to be 0 to enable this option. */
+/ (0:Disable or 1:Enable) Also FF_FS_READONLY needs to be 0 to enable this option. */
-#define _USE_LABEL 0
+#define FF_USE_LABEL 0
/* This option switches volume label functions, f_getlabel() and f_setlabel().
/ (0:Disable or 1:Enable) */
-#define _USE_FORWARD 0
+#define FF_USE_FORWARD 0
/* This option switches f_forward() function. (0:Disable or 1:Enable) */
/ Locale and Namespace Configurations
/---------------------------------------------------------------------------*/
-#define _CODE_PAGE 850
+#define FF_CODE_PAGE 850
/* This option specifies the OEM code page to be used on the target system.
-/ Incorrect setting of the code page can cause a file open failure.
+/ Incorrect code page setting can cause a file open failure.
/
-/ 1 - ASCII (No extended character. Non-LFN cfg. only)
/ 437 - U.S.
/ 720 - Arabic
/ 737 - Greek
/ 936 - Simplified Chinese (DBCS)
/ 949 - Korean (DBCS)
/ 950 - Traditional Chinese (DBCS)
+/ 0 - Include all code pages above and configured by f_setcp()
*/
-#define _USE_LFN 1
-#define _MAX_LFN 128
-/* The _USE_LFN switches the support of long file name (LFN).
+#define FF_USE_LFN 1
+#define FF_MAX_LFN 128
+/* The FF_USE_LFN switches the support for LFN (long file name).
/
-/ 0: Disable support of LFN. _MAX_LFN has no effect.
+/ 0: Disable LFN. FF_MAX_LFN has no effect.
/ 1: Enable LFN with static working buffer on the BSS. Always NOT thread-safe.
/ 2: Enable LFN with dynamic working buffer on the STACK.
/ 3: Enable LFN with dynamic working buffer on the HEAP.
/
-/ To enable the LFN, Unicode handling functions (option/unicode.c) must be added
-/ to the project. The working buffer occupies (_MAX_LFN + 1) * 2 bytes and
-/ additional 608 bytes at exFAT enabled. _MAX_LFN can be in range from 12 to 255.
-/ It should be set 255 to support full featured LFN operations.
+/ To enable the LFN, ffunicode.c needs to be added to the project. The LFN function
+/ requiers certain internal working buffer occupies (FF_MAX_LFN + 1) * 2 bytes and
+/ additional (FF_MAX_LFN + 44) / 15 * 32 bytes when exFAT is enabled.
+/ The FF_MAX_LFN defines size of the working buffer in UTF-16 code unit and it can
+/ be in range of 12 to 255. It is recommended to be set 255 to fully support LFN
+/ specification.
/ When use stack for the working buffer, take care on stack overflow. When use heap
/ memory for the working buffer, memory management functions, ff_memalloc() and
-/ ff_memfree(), must be added to the project. */
+/ ff_memfree() in ffsystem.c, need to be added to the project. */
-#define _LFN_UNICODE 0
-/* This option switches character encoding on the API. (0:ANSI/OEM or 1:UTF-16)
-/ To use Unicode string for the path name, enable LFN and set _LFN_UNICODE = 1.
-/ This option also affects behavior of string I/O functions. */
+#define FF_LFN_UNICODE 0
+/* This option switches the character encoding on the API when LFN is enabled.
+/
+/ 0: ANSI/OEM in current CP (TCHAR = char)
+/ 1: Unicode in UTF-16 (TCHAR = WCHAR)
+/ 2: Unicode in UTF-8 (TCHAR = char)
+/ 3: Unicode in UTF-32 (TCHAR = DWORD)
+/
+/ Also behavior of string I/O functions will be affected by this option.
+/ When LFN is not enabled, this option has no effect. */
-#define _STRF_ENCODE 3
-/* When _LFN_UNICODE == 1, this option selects the character encoding ON THE FILE to
-/ be read/written via string I/O functions, f_gets(), f_putc(), f_puts and f_printf().
-/
-/ 0: ANSI/OEM
-/ 1: UTF-16LE
-/ 2: UTF-16BE
-/ 3: UTF-8
+#define FF_LFN_BUF 128
+#define FF_SFN_BUF 12
+/* This set of options defines size of file name members in the FILINFO structure
+/ which is used to read out directory items. These values should be suffcient for
+/ the file names to read. The maximum possible length of the read file name depends
+/ on character encoding. When LFN is not enabled, these options have no effect. */
+
+
+#define FF_STRF_ENCODE 3
+/* When FF_LFN_UNICODE >= 1 with LFN enabled, string I/O functions, f_gets(),
+/ f_putc(), f_puts and f_printf() convert the character encoding in it.
+/ This option selects assumption of character encoding ON THE FILE to be
+/ read/written via those functions.
/
-/ This option has no effect when _LFN_UNICODE == 0. */
+/ 0: ANSI/OEM in current CP
+/ 1: Unicode in UTF-16LE
+/ 2: Unicode in UTF-16BE
+/ 3: Unicode in UTF-8
+*/
-#define _FS_RPATH 2
-/* This option configures support of relative path.
+#define FF_FS_RPATH 2
+/* This option configures support for relative path.
/
/ 0: Disable relative path and remove related functions.
/ 1: Enable relative path. f_chdir() and f_chdrive() are available.
/ Drive/Volume Configurations
/---------------------------------------------------------------------------*/
-#define _VOLUMES 2
-/* Number of volumes (logical drives) to be used. */
+#define FF_VOLUMES 2
+/* Number of volumes (logical drives) to be used. (1-10) */
-#define _STR_VOLUME_ID 0
-#define _VOLUME_STRS "RAM","NAND","CF","SD","SD2","USB","USB2","USB3"
-/* _STR_VOLUME_ID switches string support of volume ID.
-/ When _STR_VOLUME_ID is set to 1, also pre-defined strings can be used as drive
-/ number in the path name. _VOLUME_STRS defines the drive ID strings for each
-/ logical drives. Number of items must be equal to _VOLUMES. Valid characters for
-/ the drive ID strings are: A-Z and 0-9. */
+#define FF_STR_VOLUME_ID 0
+#define FF_VOLUME_STRS "RAM","NAND","CF","SD","SD2","USB","USB2","USB3"
+/* FF_STR_VOLUME_ID switches support for volume ID in arbitrary strings.
+/ When FF_STR_VOLUME_ID is set to 1 or 2, arbitrary strings can be used as drive
+/ number in the path name. FF_VOLUME_STRS defines the volume ID strings for each
+/ logical drives. Number of items must not be less than FF_VOLUMES. Valid
+/ characters for the volume ID strings are A-Z, a-z and 0-9, however, they are
+/ compared in case-insensitive. If FF_STR_VOLUME_ID >= 1 and FF_VOLUME_STRS is
+/ not defined, a user defined volume string table needs to be defined as:
+/
+/ const char* VolumeStr[FF_VOLUMES] = {"ram","flash","sd","usb",...
+*/
-#define _MULTI_PARTITION 0
-/* This option switches support of multi-partition on a physical drive.
+#define FF_MULTI_PARTITION 0
+/* This option switches support for multiple volumes on the physical drive.
/ By default (0), each logical drive number is bound to the same physical drive
/ number and only an FAT volume found on the physical drive will be mounted.
-/ When multi-partition is enabled (1), each logical drive number can be bound to
+/ When this function is enabled (1), each logical drive number can be bound to
/ arbitrary physical drive and partition listed in the VolToPart[]. Also f_fdisk()
/ funciton will be available. */
-#define _MIN_SS 512
-#define _MAX_SS 512
-/* These options configure the range of sector size to be supported. (512, 1024,
-/ 2048 or 4096) Always set both 512 for most systems, all type of memory cards and
+#define FF_MIN_SS 512
+#define FF_MAX_SS 512
+/* This set of options configures the range of sector size to be supported. (512,
+/ 1024, 2048 or 4096) Always set both 512 for most systems, generic memory card and
/ harddisk. But a larger value may be required for on-board flash memory and some
-/ type of optical media. When _MAX_SS is larger than _MIN_SS, FatFs is configured
-/ to variable sector size and GET_SECTOR_SIZE command must be implemented to the
-/ disk_ioctl() function. */
+/ type of optical media. When FF_MAX_SS is larger than FF_MIN_SS, FatFs is configured
+/ for variable sector size mode and disk_ioctl() function needs to implement
+/ GET_SECTOR_SIZE command. */
-#define _USE_TRIM 0
-/* This option switches support of ATA-TRIM. (0:Disable or 1:Enable)
+#define FF_USE_TRIM 0
+/* This option switches support for ATA-TRIM. (0:Disable or 1:Enable)
/ To enable Trim function, also CTRL_TRIM command should be implemented to the
/ disk_ioctl() function. */
-#define _FS_NOFSINFO 0
+#define FF_FS_NOFSINFO 0
/* If you need to know correct free space on the FAT32 volume, set bit 0 of this
/ option, and f_getfree() function at first time after volume mount will force
/ a full FAT scan. Bit 1 controls the use of last allocated cluster number.
/ System Configurations
/---------------------------------------------------------------------------*/
-#define _FS_TINY 1
+#define FF_FS_TINY 1
/* This option switches tiny buffer configuration. (0:Normal or 1:Tiny)
-/ At the tiny configuration, size of file object (FIL) is reduced _MAX_SS bytes.
+/ At the tiny configuration, size of file object (FIL) is shrinked FF_MAX_SS bytes.
/ Instead of private sector buffer eliminated from the file object, common sector
-/ buffer in the file system object (FATFS) is used for the file data transfer. */
+/ buffer in the filesystem object (FATFS) is used for the file data transfer. */
-#define _FS_EXFAT 0
-/* This option switches support of exFAT file system. (0:Disable or 1:Enable)
-/ When enable exFAT, also LFN needs to be enabled. (_USE_LFN >= 1)
-/ Note that enabling exFAT discards C89 compatibility. */
+#define FF_FS_EXFAT 0
+/* This option switches support for exFAT filesystem. (0:Disable or 1:Enable)
+/ To enable exFAT, also LFN needs to be enabled.
+/ Note that enabling exFAT discards ANSI C (C89) compatibility. */
-#define _FS_NORTC 0
-#define _NORTC_MON 1
-#define _NORTC_MDAY 1
-#define _NORTC_YEAR 2016
-/* The option _FS_NORTC switches timestamp functiton. If the system does not have
-/ any RTC function or valid timestamp is not needed, set _FS_NORTC = 1 to disable
-/ the timestamp function. All objects modified by FatFs will have a fixed timestamp
-/ defined by _NORTC_MON, _NORTC_MDAY and _NORTC_YEAR in local time.
-/ To enable timestamp function (_FS_NORTC = 0), get_fattime() function need to be
-/ added to the project to get current time form real-time clock. _NORTC_MON,
-/ _NORTC_MDAY and _NORTC_YEAR have no effect.
-/ These options have no effect at read-only configuration (_FS_READONLY = 1). */
+#define FF_FS_NORTC 0
+#define FF_NORTC_MON 1
+#define FF_NORTC_MDAY 1
+#define FF_NORTC_YEAR 2018
+/* The option FF_FS_NORTC switches timestamp functiton. If the system does not have
+/ any RTC function or valid timestamp is not needed, set FF_FS_NORTC = 1 to disable
+/ the timestamp function. Every object modified by FatFs will have a fixed timestamp
+/ defined by FF_NORTC_MON, FF_NORTC_MDAY and FF_NORTC_YEAR in local time.
+/ To enable timestamp function (FF_FS_NORTC = 0), get_fattime() function need to be
+/ added to the project to read current time form real-time clock. FF_NORTC_MON,
+/ FF_NORTC_MDAY and FF_NORTC_YEAR have no effect.
+/ These options have no effect at read-only configuration (FF_FS_READONLY = 1). */
-#define _FS_LOCK 0
-/* The option _FS_LOCK switches file lock function to control duplicated file open
-/ and illegal operation to open objects. This option must be 0 when _FS_READONLY
+#define FF_FS_LOCK 0
+/* The option FF_FS_LOCK switches file lock function to control duplicated file open
+/ and illegal operation to open objects. This option must be 0 when FF_FS_READONLY
/ is 1.
/
/ 0: Disable file lock function. To avoid volume corruption, application program
/ lock control is independent of re-entrancy. */
-#define _FS_REENTRANT 0
-#define _FS_TIMEOUT 1000
-#define _SYNC_t HANDLE
-/* The option _FS_REENTRANT switches the re-entrancy (thread safe) of the FatFs
+#define FF_FS_REENTRANT 0
+#define FF_FS_TIMEOUT 1000
+#define FF_SYNC_t HANDLE
+/* The option FF_FS_REENTRANT switches the re-entrancy (thread safe) of the FatFs
/ module itself. Note that regardless of this option, file access to different
/ volume is always re-entrant and volume control functions, f_mount(), f_mkfs()
/ and f_fdisk() function, are always not re-entrant. Only file/directory access
/ to the same volume is under control of this function.
/
-/ 0: Disable re-entrancy. _FS_TIMEOUT and _SYNC_t have no effect.
+/ 0: Disable re-entrancy. FF_FS_TIMEOUT and FF_SYNC_t have no effect.
/ 1: Enable re-entrancy. Also user provided synchronization handlers,
/ ff_req_grant(), ff_rel_grant(), ff_del_syncobj() and ff_cre_syncobj()
/ function, must be added to the project. Samples are available in
/ option/syscall.c.
/
-/ The _FS_TIMEOUT defines timeout period in unit of time tick.
-/ The _SYNC_t defines O/S dependent sync object type. e.g. HANDLE, ID, OS_EVENT*,
-/ SemaphoreHandle_t and etc.. A header file for O/S definitions needs to be
+/ The FF_FS_TIMEOUT defines timeout period in unit of time tick.
+/ The FF_SYNC_t defines O/S dependent sync object type. e.g. HANDLE, ID, OS_EVENT*,
+/ SemaphoreHandle_t and etc. A header file for O/S definitions needs to be
/ included somewhere in the scope of ff.h. */
/* #include <windows.h> // O/S definitions */
+
/*--- End of configuration options ---*/
projects / z180-stamp.git / blobdiff