Adaptions for fatfs R0.12b

[z180-stamp.git] / avr / main.c

diff --git a/avr/main.c b/avr/main.c
index 2955630a2168f69cb88c1919914194f9c6069ad2..86dcc50caa6c506476e333ed06434c5bb1509552 100644 (file)
--- a/avr/main.c
+++ b/avr/main.c
@@ -1,16 +1,17 @@
 /*
+ * (C) Copyright 2014 Leo C. <erbl259-lmu@yahoo.de>
+ *
+ * SPDX-License-Identifier:    GPL-2.0
  */
 
 
 #include "common.h"
-
-#include <util/delay.h>
 #include <avr/interrupt.h>
+#include <avr/wdt.h>
 #include <stdlib.h>
-#include <stdio.h>
 
 #include "config.h"
-#include "debug.h"
+#include "ff.h"
 #include "z80-if.h"
 #include "i2c.h"
 #include "con-utils.h"
@@ -18,21 +19,37 @@
 #include "timer.h"
 #include "cli.h"
 #include "env.h"
+#include "z180-serv.h"
+#include "gpio.h"
+#include "time.h"
+#include "rtc.h"
+#include "debug.h"
 
-#define udelay(n)  _delay_us(n)
-
-static uint8_t mcusr;
+uint8_t mcusr __attribute__ ((section (".noinit")));
 
-/*--------------------------------------------------------------------------*/
 #if DEBUG
-
 __attribute__ ((naked)) __attribute__ ((section (".init3")))
 void preset_ram (void)
 {
-       for (uint8_t *p = RAMSTART; p <= (uint8_t *) RAMEND; p++)
+       for (uint8_t *p = (uint8_t *) RAMSTART; p <= (uint8_t *) RAMEND; p++)
                *p = 0xdd;
 
 }
+#endif
+
+__attribute__ ((naked)) __attribute__ ((section (".init3")))
+void get_mcusr (void)
+{
+       /* save and clear reset reason(s) */
+       /* TODO: move to init section? */
+       mcusr = MCUSR;
+       MCUSR = 0;
+
+       wdt_disable();
+}
+
+/*--------------------------------------------------------------------------*/
+#if DEBUG
 
 static const FLASH char * const FLASH rreasons[] = {
                        FSTR("Power on"),
@@ -66,16 +83,14 @@ ISR(INT5_vect)
        Stat |= S_MSG_PENDING;
 }
 
+ISR(INT6_vect)
+{
+       Stat |= S_CON_PENDING;
+}
+
 static
 void setup_avr(void)
 {
-       /* save and clear reset reason(s) */
-       /* TODO: move to init section? */
-       mcusr = MCUSR;
-       MCUSR = 0;
-
-       /* WD */
-
        /* CPU */
 
        /* Disable JTAG Interface regardless of the JTAGEN fuse setting. */
@@ -100,15 +115,18 @@ void setup_avr(void)
        CLKPR = 0;
 
        /* Timer */
-       PRR1 &= ~_BV(PRTIM3);
-       OCR3A = F_CPU / 1000 - 1;       /* Timer3: 1000Hz interval (OC3A) */
-       TCCR3B = (0b01<<WGM32)|(0b001<<CS30); /* CTC Mode, Prescaler 1 */
-       TIMSK3 = _BV(OCIE3A);           /* Enable TC2.oca interrupt */
-
-       /* INT5 falling edge */
-       EICRB = (EICRB & ~(0b11 << ISC50)) | 0b10 << ISC50;
-       /* Enable INT5 */
-       EIMSK |= _BV(INT5);
+       PRR1 &= ~_BV(PRTIM4);
+       OCR4A = F_CPU / 1000 - 1;       /* Timer4: 1000Hz interval */
+       TCCR4B = (0b00<<WGM42)|(0b001<<CS40); /* Normal Mode, Prescaler 1 */
+       TIMSK4 = _BV(OCIE4A);           /* Enable Output Compare A interrupt */
+
+       /* INT5, INT6: falling edge */
+       EICRB = (EICRB & ~((0b11 << ISC50) | (0b11 << ISC60))) |
+               (0b10 << ISC50) | (0b10 << ISC60);
+       /* Reset pending ints */
+       EIFR |= _BV(INTF5) | _BV(INTF6);
+       /* Enable INT5, and INT6 */
+       EIMSK |= _BV(INT5) | _BV(INT6);
 }
 
 static
@@ -117,6 +135,27 @@ int reset_reason_is_power_on(void)
        return (mcusr & _BV(PORF)) != 0;
 }
 
+static
+void setup_system_time(void)
+{
+       struct tm rtc_time;
+
+       rtc_get(&rtc_time);
+       rtc_time.tm_isdst = 0;
+       set_system_time(mk_gmtime(&rtc_time) );
+}
+
+
+
+static void setup_fatfs(void)
+{
+       static FATFS FatFs0;
+       static FATFS FatFs1;
+
+       f_mount(&FatFs0, "0:", 0);
+       f_mount(&FatFs1, "1:", 0);
+}
+
 /*--------------------------------------------------------------------------*/
 
 /* Stored value of bootdelay, used by autoboot_command() */
@@ -144,7 +183,7 @@ static int abortboot(int  bootdelay)
         */
        if (bootdelay >= 0) {
                if (tstc()) {   /* we got a key press   */
-                       (void) my_getchar();  /* consume input  */
+                       (void) my_getchar(1);  /* consume input */
                        my_puts_P(PSTR("\b\b\b 0"));
                        abort = 1;      /* don't auto boot      */
                }
@@ -184,7 +223,7 @@ const char *bootdelay_process(void)
        debug("### main_loop entered: bootdelay=%d\n\n", bootdelay);
        _delay_ms(20);
 
-       s = getenv(PSTR(ENV_BOOTCMD));
+       s = getenv_str(PSTR(ENV_BOOTCMD));
        stored_bootdelay = bootdelay;
        return s;
 }
@@ -192,7 +231,7 @@ const char *bootdelay_process(void)
 static
 void autoboot_command(const char *s)
 {
-       debug("### main_loop: bootcmd=\"%s\"\n", s ? s : PSTR("<UNDEFINED>"));
+       debug("### main_loop: bootcmd=\"%s\"\n", s ? s : "<UNDEFINED>");
        _delay_ms(20);
 
        if (stored_bootdelay != -1 && s && !abortboot(stored_bootdelay)) {
@@ -213,11 +252,14 @@ void main_loop(void)
 
 int main(void)
 {
+       extern void setup_mmc(void);
 
        setup_avr();
-       z80_setup_bus();
-
+       for (int i = 0; i < GPIO_MAX; i++)
+               gpio_config(i, INPUT_PULLUP);
+       setup_mmc();
        env_init();
+       z80_setup_bus();
 
        if (reset_reason_is_power_on())
                _delay_ms(CONFIG_PWRON_DELAY);
@@ -230,16 +272,13 @@ int main(void)
        print_reset_reason();
 #endif
 
-#if DEBUG
-       unsigned long i_speed = getenv_ulong(PSTR("i2c_clock"), 10, CONFIG_SYS_I2C_CLOCK);
-       debug("### Setting I2C clock Frequency to %lu Hz.\n", i_speed);
-       i2c_init(i_speed);
-#else
        i2c_init(CONFIG_SYS_I2C_CLOCK);
-#endif
+       setup_system_time();
+       setup_fatfs();
 
-       printf_P(PSTR("\nATMEGA1281+Z8S180 Stamp Monitor\n\n"));
+       printf_P(PSTR("\n" MCU_STRING "+Z8S180 Stamp Monitor - Version: " VERSION  " \n\n"));
 
+       setup_z180_serv();
 
        main_loop();
 }