+/*
+ * (C) Copyright 2014-2016 Leo C. <erbl259-lmu@yahoo.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
#include "common.h"
-
#include "command.h"
+#include "cmd_mem.h"
+extern command_ret_t do_help(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_echo(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_sleep(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_env_print(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_env_default(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_env_set(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_env_save(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_loadf(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_loadcpm3(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_loadihex(cmd_tbl_t *, int, int, char * const []);
+#if defined(CONFIG_CMD_LOADB)
+extern command_ret_t do_load_serial_bin(cmd_tbl_t *, int, int, char * const []);
+#endif
+extern command_ret_t do_go(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_restart(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_console(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_dump_mem(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_mem_mm_avr(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_mem_nm_avr(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_eep_cp(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_busreq_pulse(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_date(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_gpio(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_sd(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_fat_stat(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_fat_ls(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_fat_rw(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_run(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
+extern command_ret_t do_source(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
+extern command_ret_t do_attach(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
-
-extern int do_help(cmd_tbl_t *, int, int, char * const []);
-extern int do_echo(cmd_tbl_t *, int, int, char * const []);
-extern int do_env_print(cmd_tbl_t *, int, int, char * const []);
-extern int do_env_set(cmd_tbl_t *, int, int, char * const []);
+#ifdef CONFIG_SYS_LONGHELP
+const FLASH char sd_help_text[] =
+ "bla \t- do bla\n"
+ ;
+#endif /* CONFIG_SYS_LONGHELP */
cmd_tbl_t cmd_tbl[] = {
+CMD_TBL_ITEM(
+ date, 2, 1, do_date,
+ "get/set date & time",
+ "[MMDDhhmm[[CC]YY][.ss]]\n"
+ " - without arguments: print date & time\n"
+ " - with numeric argument: set the system date & time\n"
+),
+
+#ifdef DEBUG
+
+CMD_TBL_ITEM(
+ !mdr, 3, 1, do_dump_mem,
+ "RAM dump",
+ "address [count]"
+),
+CMD_TBL_ITEM(
+ !mde, 3, 1, do_dump_mem,
+ "EEPROM dump",
+ "address [count]"
+),
+CMD_TBL_ITEM(
+ !mdf, 3, 1, do_dump_mem,
+ "FLASH dump",
+ "address [count]"
+),
+CMD_TBL_ITEM(
+ !cpe, 4, 0, do_eep_cp,
+ "EEPROM copy",
+ "source target count"
+),
+CMD_TBL_ITEM(
+ !mm, 2, 1, do_mem_mm_avr,
+ "avr memory modify (auto-incrementing address)",
+ "address"
+),
+CMD_TBL_ITEM(
+ !nm, 2, 1, do_mem_nm_avr,
+ "avr memory modify (constant address)",
+ "address"
+),
+#endif
+CMD_TBL_ITEM(
+ mstep, 2, 1, do_busreq_pulse,
+ "execute one M cycle",
+ "[count]\n"
+ " - repeat count times"
+),
CMD_TBL_ITEM(
echo, CONFIG_SYS_MAXARGS, 1, do_echo,
- "echo args to console",
- "[args..]\n"
- " - echo args to console; \\c suppresses newline"
+ "display a line of text",
+ "[-n] [argument ...]\n"
+ "- echo the argument(s) to console.\n"
+ " -n do not output the trailing newline"
+),
+CMD_TBL_ITEM(
+ sleep , 2, 1, do_sleep,
+ "delay execution for some time",
+ "N[m][s]\n"
+ " - delay execution for decimal N (milli) seconds"
),
CMD_TBL_ITEM_COMPLETE(
run, CONFIG_SYS_MAXARGS, 1, do_run,
" - run the commands in the environment variable(s) 'var'",
var_complete
),
+CMD_TBL_ITEM_COMPLETE(
+ source, CONFIG_SYS_MAXARGS, 1, do_source,
+ "run commands from a file",
+ "filename\n"
+ " - run the commands in the script file 'filename'",
+ var_complete
+),
CMD_TBL_ITEM_COMPLETE(
printenv, CONFIG_SYS_MAXARGS, 1, do_env_print,
"print environment variables",
- "\n - print [all] values of all environment variables\n"
+ "\n"
+ " - print values of all environment variables\n"
"printenv name ...\n"
" - print value of environment variable 'name'",
var_complete
CMD_TBL_ITEM_COMPLETE(
setenv, CONFIG_SYS_MAXARGS, 0, do_env_set,
"set environment variables",
- "[-f] name value ...\n"
- " - [forcibly] set environment variable 'name' to 'value ...'\n"
- "setenv [-f] name\n"
- " - [forcibly] delete environment variable 'name'",
+ "name value ...\n"
+ " - set environment variable 'name' to 'value ...'\n"
+ "setenv name\n"
+ " - delete environment variable 'name'",
var_complete
),
+CMD_TBL_ITEM(
+ saveenv, 1, 0, do_env_save,
+ "save environment variables to persistent storage",
+ ""
+),
+CMD_TBL_ITEM(
+ defaultenv, 1, 0, do_env_default,
+ "set all environment variables to their default values",
+ ""
+),
+
+CMD_TBL_ITEM(
+ loadf, 1, 0, do_loadf,
+ "load srec_cat prepared image from controller flash",
+ ""
+),
+CMD_TBL_ITEM(
+ loadcpm3, 3, 0, do_loadcpm3,
+ "load CPM3.SYS file",
+ "[filename [common-base [banked-base]]] \n"
+ " - Load CP/M 3 system file from FAT filesystem. This command makes\n"
+ " CPMLDR superfluous. Uses the following environment variables if set:\n"
+ " '"ENV_CPM3_SYSFILE"' File to load. Default is '"CONFIG_CPM3_SYSFILE"'.\n"
+ " '"ENV_CPM3_BANKED_BASE"' Default is '"CONFIG_CPM3_BANKED_BASE_STR"'.\n"
+ " Sets the following environment variables after loading:\n"
+ " '"ENV_CPM3_COMMON_BASE"'\n"
+ " '"ENV_STARTADDRESS"'"
+),
+CMD_TBL_ITEM(
+ loadi, 2, 0, do_loadihex,
+ "load intel hex file over serial line",
+ "[[-]offset]\n"
+ " - load Intel-Hex-Record file over serial line with offset 'offset'"
+),
+
+#if defined(CONFIG_CMD_LOADB)
+CMD_TBL_ITEM(
+ loadb, 1, 0, do_load_serial_bin,
+ "load binary file over serial line (kermit mode)",
+ " - load binary file over serial line"
+),
+
+CMD_TBL_ITEM(
+ loadx, 1, 0, do_load_serial_bin,
+ "load binary file over serial line (xmodem mode)",
+ " - load binary file over serial line"
+),
+
+CMD_TBL_ITEM(
+ loady, 1, 0, do_load_serial_bin,
+ "load binary file over serial line (ymodem mode)",
+ " - load binary file over serial line"
+),
+#endif /* CONFIG_CMD_LOADB */
+
+CMD_TBL_ITEM(
+ go, 2, 0, do_go,
+ "start application at address 'addr'",
+ "addr\n"
+ " - start application at address 'addr'"
+// "\n"
+// " passing 'arg' as arguments"
+),
+CMD_TBL_ITEM(
+ reset, 1, 0, do_reset,
+ "Keep CPU in RESET state",
+ ""
+),
+CMD_TBL_ITEM(
+ restart, 1, 1, do_restart,
+ "Perform RESET of the CPU",
+ ""
+),
+CMD_TBL_ITEM(
+ connect, 1, 0, do_console,
+ "Connect to CPU console i/o",
+ "\n"
+ " - type the escape character followed by Q to close the connection, \n"
+ " or followed by ? to see other options. The default escape character \n"
+ " is Ctrl-^ (0x1E). It can be changed by setting env var '"ENV_ESC_CHAR"'."
+
+),
+
+CMD_TBL_ITEM(
+ pin, CONFIG_SYS_MAXARGS, 1, do_gpio,
+ "Set or query pin state",
+ "[-s] [<pins>]\n"
+ " - print cofiguration and state or frequency of pins\n"
+ " print all pins, if argument is omitted\n"
+ "pin <pins> h[igh]|l[ow]\n"
+ " - config pins as output and set to level high or low\n"
+ "pin <pins> ts|i[n]|p[ullup]\n"
+ " - config pins as input/tristate or input with pullup\n"
+ "pin <pins> value[K|M][Hz]\n"
+ " - output a clock on pins\n"
+ " value is system clock divider or frequency, if 'Hz' is appended\n"
+ " divider is rounded down to next possible value (depends on pin)\n"
+ "\n"
+ "<pins> is a comma separated list of numbers or ranges, i.e. \"0,9,3-6\"\n"
+),
+
+CMD_TBL_ITEM(
+ md, 3, 1, do_mem_md,
+ "memory display",
+ "address [# of objects]"
+),
+CMD_TBL_ITEM(
+ mm, 2, 1, do_mem_mm,
+ "memory modify (auto-incrementing address)",
+ "address"
+),
+CMD_TBL_ITEM(
+ nm, 2, 1, do_mem_nm,
+ "memory modify (constant address)",
+ "address"
+),
+CMD_TBL_ITEM(
+ mw, CONFIG_SYS_MAXARGS, 1, do_mem_mw,
+ "memory write (fill)",
+ "[-bwl] address value [count]\n"
+ " -b write value as byte (8 bit, default)\n"
+ " -w write value as word (16 bit)\n"
+ " -l write value as long (32 bit)\n"
+),
+CMD_TBL_ITEM(
+ cp, 4, 1, do_mem_cp,
+ "memory copy",
+ "source target count"
+),
+CMD_TBL_ITEM(
+ cmp, 4, 1, do_mem_cmp,
+ "memory compare",
+ "addr1 addr2 count"
+),
+CMD_TBL_ITEM(
+ base, 2, 0, do_mem_base,
+ "print or set address offset",
+ "\n"
+ " - print address offset for memory commands\n"
+ "base offset\n"
+ " - set address offset for memory commands to 'offset'"
+),
+CMD_TBL_ITEM(
+ mloop, 3, 1, do_mem_loop,
+ "infinite loop on address range",
+ "address number_of_bytes"
+),
+CMD_TBL_ITEM(
+ mloopw, 4, 1, do_mem_loopw,
+ "infinite write loop on address range",
+ "address number_of_bytes data_to_write"
+),
+
+#ifdef CONFIG_CMD_MEMTEST
+CMD_TBL_ITEM(
+ mtest, 4, 1, do_mem_mtest,
+ "simple RAM read/write test",
+ "[start [end [iterations]]]"
+),
+#endif /* CONFIG_CMD_MEMTEST */
+
+#ifdef CONFIG_MX_CYCLIC
+CMD_TBL_ITEM(
+ mdc, 4, 1, do_mem_mdc,
+ "memory display cyclic",
+ "address count delay(ms)"
+),
+CMD_TBL_ITEM(
+ mwc, 4, 1, do_mem_mdc,
+ "memory write cyclic",
+ "address value delay(ms)"
+),
+#endif /* CONFIG_MX_CYCLIC */
+
+CMD_TBL_ITEM(
+ sd, CONFIG_SYS_MAXARGS, 1, do_sd,
+ "SD/MMC card handling commands",
+ "<subcommand> args ...\n"
+ "sd help\n"
+ " - print help on subcommands"
+),
+
+CMD_TBL_ITEM(
+ fatstat, 2, 1, do_fat_stat,
+ "Show logical drive status",
+ "dev"
+),
+CMD_TBL_ITEM(
+ fatls, 2, 1, do_fat_ls,
+ "Directory listing",
+ "path"
+),
+CMD_TBL_ITEM(
+ fatload, 5, 0, do_fat_rw,
+ "load binary file from a dos filesystem",
+ "<d:/path/filename> <addr> [bytes [pos]]\n"
+ " - Load binary file 'path/filename' on logical drive 'd'\n"
+ " to address 'addr' from dos filesystem.\n"
+ " 'pos' gives the file position to start loading from.\n"
+ " If 'pos' is omitted, 0 is used. 'pos' requires 'bytes'.\n"
+ " 'bytes' gives the size to load. If 'bytes' is 0 or omitted,\n"
+ " the load stops on end of file."
+),
+CMD_TBL_ITEM(
+ fatwrite, 4, 0, do_fat_rw,
+ "write file into a dos filesystem",
+ "<d:/path/filename> <addr> <bytes>\n"
+ " - Write file to 'path/filename' on logical drive 'd' from RAM\n"
+ " starting at address 'addr'.\n"
+),
+CMD_TBL_ITEM(
+ attach, CONFIG_SYS_MAXARGS, 1, do_attach,
+ "attach filesystem image file to CP/M drive",
+ "[options] [dsk<n> <d:/path/filename>]\n"
+ " - attach drive number <n> to diskfile <d:/path/filename>\n"
+ "attach -d dsk<n>\n"
+ " - detach drive\n"
+ "attach\n"
+ " - without arguments, list current assignments"
+),
+CMD_TBL_ITEM(
+ detach, 2, 1, do_attach,
+ "detach file from CP/M drive",
+ "dsk<n>]\n"
+ " - same as attach -d dsk<n>"
+),
+
CMD_TBL_ITEM(
help, CONFIG_SYS_MAXARGS, 1, do_help,
"print command description/usage",
" - print detailed usage of 'command'"
),
-/* This does not use the U_BOOT_CMD macro as ? can't be used in symbol names */
+/* This does not use the CMD_TBL_ITEM macro as ? can't be used in symbol names */
{FSTR("?"), CONFIG_SYS_MAXARGS, 1, do_help,
FSTR("alias for 'help'"),
#ifdef CONFIG_SYS_LONGHELP
/* Mark end of table */
{ 0 },
};
-
-
-
-
-
-
-
-
-