#include "common.h"
#include "command.h"
+#include "cmd_mem.h"
-
-extern int do_help(cmd_tbl_t *, int, int, char * const []);
-extern int do_echo(cmd_tbl_t *, int, int, char * const []);
-extern int do_env_print(cmd_tbl_t *, int, int, char * const []);
-extern int do_env_set(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_help(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_echo(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_sleep(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_env_print(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_env_default(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_env_set(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_env_save(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_loadf(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_go(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_restart(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_console(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_dump_mem(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_eep_cp(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_busreq_pulse(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_date(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_pin(cmd_tbl_t *, int, int, char * const []);
cmd_tbl_t cmd_tbl[] = {
+CMD_TBL_ITEM(
+ date, 2, 1, do_date,
+ "get/set/reset date & time",
+ "[MMDDhhmm[[CC]YY][.ss]]\ndate reset\n"
+ " - without arguments: print date & time\n"
+ " - with numeric argument: set the system date & time\n"
+ " - with 'reset' argument: reset the RTC"
+),
+
+#ifdef DEBUG
+CMD_TBL_ITEM(
+ !mdr, 3, 1, do_dump_mem,
+ "RAM dump",
+ "address [count]"
+),
+CMD_TBL_ITEM(
+ !mde, 3, 1, do_dump_mem,
+ "EEPROM dump",
+ "address [count]"
+),
+CMD_TBL_ITEM(
+ !cpe, 4, 0, do_eep_cp,
+ "EEPROM copy",
+ "source target count"
+),
+#endif
+CMD_TBL_ITEM(
+ mstep, 2, 1, do_busreq_pulse,
+ "execute one M cycle",
+ "[count]\n"
+ " - repeat count times"
+),
CMD_TBL_ITEM(
echo, CONFIG_SYS_MAXARGS, 1, do_echo,
"echo args to console",
"[args..]\n"
" - echo args to console; \\c suppresses newline"
),
+CMD_TBL_ITEM(
+ sleep , 2, 1, do_sleep,
+ "delay execution for some time",
+ "N[m][s]\n"
+ " - delay execution for decimal N (milli) seconds"
+),
CMD_TBL_ITEM_COMPLETE(
run, CONFIG_SYS_MAXARGS, 1, do_run,
"run commands in an environment variable",
CMD_TBL_ITEM_COMPLETE(
printenv, CONFIG_SYS_MAXARGS, 1, do_env_print,
"print environment variables",
- "\n - print [all] values of all environment variables\n"
+ "\n"
+ " - print values of all environment variables\n"
"printenv name ...\n"
" - print value of environment variable 'name'",
var_complete
CMD_TBL_ITEM_COMPLETE(
setenv, CONFIG_SYS_MAXARGS, 0, do_env_set,
"set environment variables",
- "[-f] name value ...\n"
- " - [forcibly] set environment variable 'name' to 'value ...'\n"
- "setenv [-f] name\n"
- " - [forcibly] delete environment variable 'name'",
+ "name value ...\n"
+ " - set environment variable 'name' to 'value ...'\n"
+ "setenv name\n"
+ " - delete environment variable 'name'",
var_complete
),
+CMD_TBL_ITEM(
+ saveenv, 1, 0, do_env_save,
+ "save environment variables to persistent storage",
+ ""
+),
+CMD_TBL_ITEM(
+ defaultenv, 1, 0, do_env_default,
+ "set all environment variables to their default values",
+ ""
+),
+
+CMD_TBL_ITEM(
+ loadf, 1, 0, do_loadf,
+ "load srec_cat prepared image from controller flash",
+ ""
+),
+CMD_TBL_ITEM(
+ go, 2, 0, do_go,
+ "start application at address 'addr'",
+ "addr\n"
+ " - start application at address 'addr'"
+// "\n"
+// " passing 'arg' as arguments"
+),
+CMD_TBL_ITEM(
+ reset, 1, 0, do_reset,
+ "Keep CPU in RESET state",
+ ""
+),
+CMD_TBL_ITEM(
+ restart, 1, 1, do_restart,
+ "Perform RESET of the CPU",
+ ""
+),
+CMD_TBL_ITEM(
+ connect, 1, 1, do_console,
+ "Connect to CPU console i/o",
+ ""
+),
+
+#if 0
+CMD_TBL_ITEM(
+ clock, 2, 0, do_clock,
+ "Set or get CPU frequency",
+ "\n"
+ " - print frequency or state of clock pin\n"
+ "clock value[K|M]\n"
+ " - set frequency of clock pin to value\n"
+ "clock [high|low]\n"
+ " - set clock pin level high or low"
+),
+CMD_TBL_ITEM(
+ clk2, 3, 0, do_clock2,
+ "Set or get clk2 frequency",
+ "\n"
+ " - print frequency or state of clk2 pin\n"
+ "clk2 [-d] value[K|M]\n"
+ " - set frequency of clk2 pin to value\n"
+ "clk2 [high|low]\n"
+ " - set clk2 pin level high or low"
+),
+#endif
+
+CMD_TBL_ITEM(
+ pin, CONFIG_SYS_MAXARGS, 0, do_pin,
+ "Set or query pin state",
+ "[-s] [<pins>]\n"
+ " - print cofiguration and state or frequency of pins\n"
+ " print all pins, if argument is omitted\n"
+ "pin <pins> h[igh]|l[ow]\n"
+ " - config pins as output and set to level high or low\n"
+ "pin <pins> ts|i[n]|p[ullup]\n"
+ " - config pins as input/tristate or input with pullup\n"
+ "pin <pins> value[K|M][Hz]\n"
+ " - output a clock on pins\n"
+ " value is system clock divider or frequency, if 'Hz' is appended\n"
+ " divider is rounded down to next possible value (depends on pin)\n"
+ "\n"
+ "<pins> is a comma separated list of numbers or ranges, i.e. \"0,9,3-6\"\n"
+),
+
+CMD_TBL_ITEM(
+ md, 3, 1, do_mem_md,
+ "memory display",
+ "address [# of objects]"
+),
+CMD_TBL_ITEM(
+ mm, 2, 1, do_mem_mm,
+ "memory modify (auto-incrementing address)",
+ "address"
+),
+CMD_TBL_ITEM(
+ nm, 2, 1, do_mem_nm,
+ "memory modify (constant address)",
+ "address"
+),
+CMD_TBL_ITEM(
+ mw, 4, 1, do_mem_mw,
+ "memory write (fill)",
+ "address value [count]"
+),
+CMD_TBL_ITEM(
+ cp, 4, 1, do_mem_cp,
+ "memory copy",
+ "source target count"
+),
+CMD_TBL_ITEM(
+ cmp, 4, 1, do_mem_cmp,
+ "memory compare",
+ "addr1 addr2 count"
+),
+CMD_TBL_ITEM(
+ base, 2, 1, do_mem_base,
+ "print or set address offset",
+ "\n"
+ " - print address offset for memory commands\n"
+ "base offset\n"
+ " - set address offset for memory commands to 'offset'"
+),
+CMD_TBL_ITEM(
+ loop, 3, 1, do_mem_loop,
+ "infinite loop on address range",
+ "address number_of_bytes"
+),
+#ifdef CONFIG_LOOPW
+CMD_TBL_ITEM(
+ loopw, 4, 1, do_mem_loopw,
+ "infinite write loop on address range",
+ "address number_of_bytes data_to_write"
+),
+#endif /* CONFIG_LOOPW */
+
+#ifdef CONFIG_CMD_MEMTEST
+CMD_TBL_ITEM(
+ mtest, 5, 1, do_mem_mtest,
+ "simple RAM read/write test",
+ "[start [end [pattern [iterations]]]]"
+),
+#endif /* CONFIG_CMD_MEMTEST */
+
+#ifdef CONFIG_MX_CYCLIC
+CMD_TBL_ITEM(
+ mdc, 4, 1, do_mem_mdc,
+ "memory display cyclic",
+ "address count delay(ms)"
+),
+CMD_TBL_ITEM(
+ mwc, 4, 1, do_mem_mwc,
+ "memory write cyclic",
+ "address value delay(ms)"
+),
+#endif /* CONFIG_MX_CYCLIC */
+
+
CMD_TBL_ITEM(
help, CONFIG_SYS_MAXARGS, 1, do_help,
"print command description/usage",
" - print detailed usage of 'command'"
),
-/* This does not use the U_BOOT_CMD macro as ? can't be used in symbol names */
+/* This does not use the CMD_TBL_ITEM macro as ? can't be used in symbol names */
{FSTR("?"), CONFIG_SYS_MAXARGS, 1, do_help,
FSTR("alias for 'help'"),
#ifdef CONFIG_SYS_LONGHELP
/* Mark end of table */
{ 0 },
};
-
-
-
-
-
-
-
-
-
projects / z180-stamp.git / blobdiff