/*---------------------------------------------------------------------------/
-/ FatFs - FAT file system module configuration file R0.10c (C)ChaN, 2014
+/ FatFs - FAT file system module configuration file
/---------------------------------------------------------------------------*/
-#define _FFCONF 80376 /* Revision ID */
+#define _FFCONF 68020 /* Revision ID */
/*---------------------------------------------------------------------------/
-/ Functions and Buffer Configurations
+/ Function Configurations
/---------------------------------------------------------------------------*/
-#define _FS_TINY 1
-/* This option switches tiny buffer configuration. (0:Normal or 1:Tiny)
-/ At the tiny configuration, size of the file object (FIL) is reduced _MAX_SS
-/ bytes. Instead of private sector buffer eliminated from the file object,
-/ common sector buffer in the file system object (FATFS) is used for the file
-/ data transfer. */
-
-
#define _FS_READONLY 0
/* This option switches read-only configuration. (0:Read/Write or 1:Read-only)
-/ Read-only configuration removes basic writing API functions, f_write(),
-/ f_sync(), f_unlink(), f_mkdir(), f_chmod(), f_rename(), f_truncate(),
-/ f_getfree() and optional writing functions as well. */
+/ Read-only configuration removes writing API functions, f_write(), f_sync(),
+/ f_unlink(), f_mkdir(), f_chmod(), f_rename(), f_truncate(), f_getfree()
+/ and optional writing functions as well. */
#define _FS_MINIMIZE 0
-/* This option defines minimization level to remove some API functions.
+/* This option defines minimization level to remove some basic API functions.
/
/ 0: All basic functions are enabled.
-/ 1: f_stat(), f_getfree(), f_unlink(), f_mkdir(), f_chmod(), f_utime(),
-/ f_truncate() and f_rename() function are removed.
+/ 1: f_stat(), f_getfree(), f_unlink(), f_mkdir(), f_truncate() and f_rename()
+/ are removed.
/ 2: f_opendir(), f_readdir() and f_closedir() are removed in addition to 1.
/ 3: f_lseek() function is removed in addition to 2. */
-#define _USE_STRFUNC 2
+#define _USE_STRFUNC 0
/* This option switches string functions, f_gets(), f_putc(), f_puts() and
/ f_printf().
/
/ 2: Enable with LF-CRLF conversion. */
+#define _USE_FIND 0
+/* This option switches filtered directory read functions, f_findfirst() and
+/ f_findnext(). (0:Disable, 1:Enable 2:Enable with matching altname[] too) */
+
+
#define _USE_MKFS 0
-/* This option switches f_mkfs() function. (0:Disable or 1:Enable)
-/ To enable it, also _FS_READONLY need to be set to 0. */
+/* This option switches f_mkfs() function. (0:Disable or 1:Enable) */
#define _USE_FASTSEEK 0
-/* This option switches fast seek feature. (0:Disable or 1:Enable) */
+/* This option switches fast seek function. (0:Disable or 1:Enable) */
+
+#define _USE_EXPAND 0
+/* This option switches f_expand function. (0:Disable or 1:Enable) */
-#define _USE_LABEL 1
+
+#define _USE_CHMOD 0
+/* This option switches attribute manipulation functions, f_chmod() and f_utime().
+/ (0:Disable or 1:Enable) Also _FS_READONLY needs to be 0 to enable this option. */
+
+
+#define _USE_LABEL 0
/* This option switches volume label functions, f_getlabel() and f_setlabel().
/ (0:Disable or 1:Enable) */
#define _USE_FORWARD 0
/* This option switches f_forward() function. (0:Disable or 1:Enable) */
-/* To enable it, also _FS_TINY need to be set to 1. */
/*---------------------------------------------------------------------------/
/ Locale and Namespace Configurations
/---------------------------------------------------------------------------*/
-#define _CODE_PAGE 858
+#define _CODE_PAGE 850
/* This option specifies the OEM code page to be used on the target system.
/ Incorrect setting of the code page can cause a file open failure.
/
-/ 932 - Japanese Shift_JIS (DBCS, OEM, Windows)
-/ 936 - Simplified Chinese GBK (DBCS, OEM, Windows)
-/ 949 - Korean (DBCS, OEM, Windows)
-/ 950 - Traditional Chinese Big5 (DBCS, OEM, Windows)
-/ 1250 - Central Europe (Windows)
-/ 1251 - Cyrillic (Windows)
-/ 1252 - Latin 1 (Windows)
-/ 1253 - Greek (Windows)
-/ 1254 - Turkish (Windows)
-/ 1255 - Hebrew (Windows)
-/ 1256 - Arabic (Windows)
-/ 1257 - Baltic (Windows)
-/ 1258 - Vietnam (OEM, Windows)
-/ 437 - U.S. (OEM)
-/ 720 - Arabic (OEM)
-/ 737 - Greek (OEM)
-/ 775 - Baltic (OEM)
-/ 850 - Multilingual Latin 1 (OEM)
-/ 858 - Multilingual Latin 1 + Euro (OEM)
-/ 852 - Latin 2 (OEM)
-/ 855 - Cyrillic (OEM)
-/ 866 - Russian (OEM)
-/ 857 - Turkish (OEM)
-/ 862 - Hebrew (OEM)
-/ 874 - Thai (OEM, Windows)
-/ 1 - ASCII (No extended character. Valid for only non-LFN configuration.) */
+/ 1 - ASCII (No extended character. Non-LFN cfg. only)
+/ 437 - U.S.
+/ 720 - Arabic
+/ 737 - Greek
+/ 771 - KBL
+/ 775 - Baltic
+/ 850 - Latin 1
+/ 852 - Latin 2
+/ 855 - Cyrillic
+/ 857 - Turkish
+/ 860 - Portuguese
+/ 861 - Icelandic
+/ 862 - Hebrew
+/ 863 - Canadian French
+/ 864 - Arabic
+/ 865 - Nordic
+/ 866 - Russian
+/ 869 - Greek 2
+/ 932 - Japanese (DBCS)
+/ 936 - Simplified Chinese (DBCS)
+/ 949 - Korean (DBCS)
+/ 950 - Traditional Chinese (DBCS)
+*/
#define _USE_LFN 1
#define _MAX_LFN 128
-/* The _USE_LFN option switches the LFN feature.
+/* The _USE_LFN switches the support of long file name (LFN).
/
-/ 0: Disable LFN feature. _MAX_LFN has no effect.
+/ 0: Disable support of LFN. _MAX_LFN has no effect.
/ 1: Enable LFN with static working buffer on the BSS. Always NOT thread-safe.
/ 2: Enable LFN with dynamic working buffer on the STACK.
/ 3: Enable LFN with dynamic working buffer on the HEAP.
/
-/ When enable the LFN feature, Unicode handling functions (option/unicode.c) must
-/ be added to the project. The LFN working buffer occupies (_MAX_LFN + 1) * 2 bytes.
+/ To enable the LFN, Unicode handling functions (option/unicode.c) must be added
+/ to the project. The working buffer occupies (_MAX_LFN + 1) * 2 bytes and
+/ additional 608 bytes at exFAT enabled. _MAX_LFN can be in range from 12 to 255.
+/ It should be set 255 to support full featured LFN operations.
/ When use stack for the working buffer, take care on stack overflow. When use heap
/ memory for the working buffer, memory management functions, ff_memalloc() and
/ ff_memfree(), must be added to the project. */
#define _LFN_UNICODE 0
-/* This option switches character encoding on the API. (0:ANSI/OEM or 1:Unicode)
-/ To use Unicode string for the path name, enable LFN feature and set _LFN_UNICODE
-/ to 1. This option also affects behavior of string I/O functions. */
+/* This option switches character encoding on the API. (0:ANSI/OEM or 1:UTF-16)
+/ To use Unicode string for the path name, enable LFN and set _LFN_UNICODE = 1.
+/ This option also affects behavior of string I/O functions. */
#define _STRF_ENCODE 3
-/* When _LFN_UNICODE is 1, this option selects the character encoding on the file to
+/* When _LFN_UNICODE == 1, this option selects the character encoding ON THE FILE to
/ be read/written via string I/O functions, f_gets(), f_putc(), f_puts and f_printf().
/
/ 0: ANSI/OEM
/ 2: UTF-16BE
/ 3: UTF-8
/
-/ When _LFN_UNICODE is 0, this option has no effect. */
+/ This option has no effect when _LFN_UNICODE == 0. */
#define _FS_RPATH 2
-/* This option configures relative path feature.
+/* This option configures support of relative path.
/
-/ 0: Disable relative path feature and remove related functions.
-/ 1: Enable relative path feature. f_chdir() and f_chdrive() are available.
+/ 0: Disable relative path and remove related functions.
+/ 1: Enable relative path. f_chdir() and f_chdrive() are available.
/ 2: f_getcwd() function is available in addition to 1.
-/
-/ Note that directory items read via f_readdir() are affected by this option. */
+*/
/*---------------------------------------------------------------------------/
#define _STR_VOLUME_ID 0
-#define _VOLUME_STRS "RAM","NAND","CF","SD1","SD2","USB1","USB2","USB3"
-/* _STR_VOLUME_ID option switches string volume ID feature.
+#define _VOLUME_STRS "RAM","NAND","CF","SD","SD2","USB","USB2","USB3"
+/* _STR_VOLUME_ID switches string support of volume ID.
/ When _STR_VOLUME_ID is set to 1, also pre-defined strings can be used as drive
/ number in the path name. _VOLUME_STRS defines the drive ID strings for each
/ logical drives. Number of items must be equal to _VOLUMES. Valid characters for
#define _MULTI_PARTITION 0
-/* This option switches multi-partition feature. By default (0), each logical drive
-/ number is bound to the same physical drive number and only an FAT volume found on
-/ the physical drive will be mounted. When multi-partition feature is enabled (1),
-/ each logical drive number is bound to arbitrary physical drive and partition
-/ listed in the VolToPart[]. Also f_fdisk() funciton will be enabled. */
+/* This option switches support of multi-partition on a physical drive.
+/ By default (0), each logical drive number is bound to the same physical drive
+/ number and only an FAT volume found on the physical drive will be mounted.
+/ When multi-partition is enabled (1), each logical drive number can be bound to
+/ arbitrary physical drive and partition listed in the VolToPart[]. Also f_fdisk()
+/ funciton will be available. */
#define _MIN_SS 512
#define _USE_TRIM 0
-/* This option switches ATA-TRIM feature. (0:Disable or 1:Enable)
-/ To enable Trim feature, also CTRL_TRIM command should be implemented to the
+/* This option switches support of ATA-TRIM. (0:Disable or 1:Enable)
+/ To enable Trim function, also CTRL_TRIM command should be implemented to the
/ disk_ioctl() function. */
/ System Configurations
/---------------------------------------------------------------------------*/
+#define _FS_TINY 1
+/* This option switches tiny buffer configuration. (0:Normal or 1:Tiny)
+/ At the tiny configuration, size of file object (FIL) is reduced _MAX_SS bytes.
+/ Instead of private sector buffer eliminated from the file object, common sector
+/ buffer in the file system object (FATFS) is used for the file data transfer. */
+
+
+#define _FS_EXFAT 0
+/* This option switches support of exFAT file system. (0:Disable or 1:Enable)
+/ When enable exFAT, also LFN needs to be enabled. (_USE_LFN >= 1)
+/ Note that enabling exFAT discards C89 compatibility. */
+
+
#define _FS_NORTC 0
-#define _NORTC_MON 11
-#define _NORTC_MDAY 9
-#define _NORTC_YEAR 2014
-/* The _FS_NORTC option switches timestamp feature. If the system does not have
-/ an RTC function or valid timestamp is not needed, set _FS_NORTC to 1 to disable
-/ the timestamp feature. All objects modified by FatFs will have a fixed timestamp
-/ defined by _NORTC_MON, _NORTC_MDAY and _NORTC_YEAR.
-/ When timestamp feature is enabled (_FS_NORTC == 0), get_fattime() function need
-/ to be added to the project to read current time form RTC. _NORTC_MON,
-/ _NORTC_MDAY and _NORTC_YEAR have no effect.
-/ These options have no effect at read-only configuration (_FS_READONLY == 1). */
+#define _NORTC_MON 1
+#define _NORTC_MDAY 1
+#define _NORTC_YEAR 2016
+/* The option _FS_NORTC switches timestamp functiton. If the system does not have
+/ any RTC function or valid timestamp is not needed, set _FS_NORTC = 1 to disable
+/ the timestamp function. All objects modified by FatFs will have a fixed timestamp
+/ defined by _NORTC_MON, _NORTC_MDAY and _NORTC_YEAR in local time.
+/ To enable timestamp function (_FS_NORTC = 0), get_fattime() function need to be
+/ added to the project to get current time form real-time clock. _NORTC_MON,
+/ _NORTC_MDAY and _NORTC_YEAR have no effect.
+/ These options have no effect at read-only configuration (_FS_READONLY = 1). */
#define _FS_LOCK 0
-/* The _FS_LOCK option switches file lock feature to control duplicated file open
+/* The option _FS_LOCK switches file lock function to control duplicated file open
/ and illegal operation to open objects. This option must be 0 when _FS_READONLY
/ is 1.
/
-/ 0: Disable file lock feature. To avoid volume corruption, application program
+/ 0: Disable file lock function. To avoid volume corruption, application program
/ should avoid illegal open, remove and rename to the open objects.
-/ >0: Enable file lock feature. The value defines how many files/sub-directories
+/ >0: Enable file lock function. The value defines how many files/sub-directories
/ can be opened simultaneously under file lock control. Note that the file
-/ lock feature is independent of re-entrancy. */
+/ lock control is independent of re-entrancy. */
#define _FS_REENTRANT 0
#define _FS_TIMEOUT 1000
#define _SYNC_t HANDLE
-/* The _FS_REENTRANT option switches the re-entrancy (thread safe) of the FatFs
+/* The option _FS_REENTRANT switches the re-entrancy (thread safe) of the FatFs
/ module itself. Note that regardless of this option, file access to different
/ volume is always re-entrant and volume control functions, f_mount(), f_mkfs()
/ and f_fdisk() function, are always not re-entrant. Only file/directory access
-/ to the same volume is under control of this feature.
+/ to the same volume is under control of this function.
/
/ 0: Disable re-entrancy. _FS_TIMEOUT and _SYNC_t have no effect.
/ 1: Enable re-entrancy. Also user provided synchronization handlers,
/
/ The _FS_TIMEOUT defines timeout period in unit of time tick.
/ The _SYNC_t defines O/S dependent sync object type. e.g. HANDLE, ID, OS_EVENT*,
-/ SemaphoreHandle_t and etc.. */
+/ SemaphoreHandle_t and etc.. A header file for O/S definitions needs to be
+/ included somewhere in the scope of ff.h. */
+/* #include <windows.h> // O/S definitions */
-#define _WORD_ACCESS 1 /* 0 or 1 */
-/* The _WORD_ACCESS option is an only platform dependent option. It defines
-/ which access method is used to the word data on the FAT volume.
-/
-/ 0: Byte-by-byte access. Always compatible with all platforms.
-/ 1: Word access. Do not choose this unless under both the following conditions.
-/
-/ * Address misaligned memory access is always allowed to ALL instructions.
-/ * Byte order on the memory is little-endian.
-/
-/ If it is the case, _WORD_ACCESS can also be set to 1 to reduce code size.
-/ Following table shows allowable settings of some processor types.
-/
-/ ARM7TDMI 0 ColdFire 0 V850E 0
-/ Cortex-M3 0 Z80 0/1 V850ES 0/1
-/ Cortex-M0 0 x86 0/1 TLCS-870 0/1
-/ AVR 0/1 RX600(LE) 0/1 TLCS-900 0/1
-/ AVR32 0 RL78 0 R32C 0
-/ PIC18 0/1 SH-2 0 M16C 0/1
-/ PIC24 0 H8S 0 MSP430 0
-/ PIC32 0 H8/300H 0 8051 0/1
-*/
+
+/*--- End of configuration options ---*/
projects / z180-stamp.git / blobdiff