-#HFUSE = 0xDE
-#LFUSE = 0xFF
-#EFUSE = 0xFD
-
-# Fuse high byte:
-# 0xda = 1 1 0 1 1 1 1 0 <-- BOOTRST (Boot Reset vector Enabled 0x3c00)
-# ^ ^ ^ ^ ^ ^ ^------ BOOTSZ0
-# | | | | | +-------- BOOTSZ1 (Boot Flash section size 256 words)
-# | | | | + --------- EESAVE (don't preserve EEPROM over chip erase)
-# | | | +-------------- WDTON (WDT not always on)
-# | | +---------------- SPIEN (allow serial programming)
-# | +------------------ DWEN (debugWIRE is not enabled)
-# +-------------------- RSTDISBL (reset pin is enabled)
-# Fuse low byte:
-# 0x9f = 1 1 1 1 1 1 1 1
-# ^ ^ \ / \--+--/
-# | | | +------- CKSEL 3..0 (Low Power Crystal)
-# | | +--------------- SUT 1..0 (Crystal Osc, slowly rising power)
-# | +------------------ CKOUT (Clock output disabled)
-# +-------------------- CKDIV8 (don't divide clock by 8)
-# Fuse Extended byte:
-# 0x9f = 1 1 1 1 1 1 0 1
-# \-+-/
-# +------ Bodlevel (VCC = 2.7V)