#include "common.h"
#include <util/delay.h>
-//#include <avr/power.h>
-//#include <avr/pgmspace.h>
#include <avr/interrupt.h>
-//#include <util/atomic.h>
-//#include <avr/sleep.h>
-//#include <string.h>
-
-#include <util/delay.h>
-
#include <stdlib.h>
#include <stdio.h>
-
#include "config.h"
#include "debug.h"
#include "z80-if.h"
+#include "i2c.h"
#include "con-utils.h"
#include "serial.h"
#include "timer.h"
#include "cli.h"
#include "env.h"
-/*--------------------------------------------------------------------------*/
+#define udelay(n) _delay_us(n)
static uint8_t mcusr;
+/*--------------------------------------------------------------------------*/
+#if DEBUG
+
+__attribute__ ((naked)) __attribute__ ((section (".init3")))
+void preset_ram (void)
+{
+ for (uint8_t *p = RAMSTART; p <= (uint8_t *) RAMEND; p++)
+ *p = 0xdd;
+
+}
+
+static const FLASH char * const FLASH rreasons[] = {
+ FSTR("Power on"),
+ FSTR("External"),
+ FSTR("Brown out"),
+ FSTR("Watchdog"),
+ FSTR("JTAG"),
+ };
+
+static
+void print_reset_reason(void)
+{
+ uint8_t r = mcusr & 0x1f;
+ const FLASH char * const FLASH *p = rreasons;
+
+ printf_P(PSTR("### Reset reason(s): %s"), r ? "" : "none");
+ for ( ; r; p++, r >>= 1) {
+ if (r & 1) {
+ my_puts_P(*p);
+ if (r & ~1)
+ printf_P(PSTR(", "));
+ }
+ }
+ printf_P(PSTR(".\n"));
+}
+
+#endif
+
static
void setup_avr(void)
{
/* save and clear reset reason(s) */
+ /* TODO: move to init section? */
mcusr = MCUSR;
MCUSR = 0;
TIMSK1 = _BV(OCIE1A); // Enable TC1.oca interrupt
}
-static const FLASH char * const FLASH rreasons[] = {
- FSTR("Power on"),
- FSTR("External"),
- FSTR("Brown out"),
- FSTR("Watchdog"),
- FSTR("JTAG"),
- };
-
static
-void print_reset_reason(void)
+int reset_reason_is_power_on(void)
{
- uint8_t r = mcusr & 0x1f;
- const FLASH char * const FLASH *p = rreasons;
-
- printf_P(PSTR("Reset reason(s): "));
- for ( ; r; p++, r >>= 1) {
- if (r & 1) {
- my_puts_P(*p);
- if (r & ~1)
- printf_P(PSTR(", "));
- }
- }
- printf_P(PSTR(".\n"));
+ return (mcusr & _BV(PORF)) != 0;
}
-
-/*******************************************************************************/
-/*******************************************************************************/
-
-#define udelay(n) _delay_us(n)
-
+/*--------------------------------------------------------------------------*/
/* Stored value of bootdelay, used by autoboot_command() */
static int stored_bootdelay;
char *s;
int bootdelay;
- s = getenv("bootdelay");
- bootdelay = s ? atoi(s) : CONFIG_BOOTDELAY;
+ bootdelay = (int) getenv_ulong("bootdelay", 10, CONFIG_BOOTDELAY);
debug("### main_loop entered: bootdelay=%d\n\n", bootdelay);
int main(void)
{
+
setup_avr();
z80_setup_bus();
+
+ if (reset_reason_is_power_on())
+ _delay_ms(CONFIG_POWRON_DELAY);
serial_setup();
sei();
- debug("\n=========================< (RE)START DEBUG >=========================\n");
#if DEBUG
+ debug("\n=========================< (RE)START DEBUG >=========================\n");
print_reset_reason();
#endif
env_init();
+#if DEBUG
+ unsigned long i_speed = getenv_ulong("i2c_clock", 10, CONFIG_SYS_I2C_CLOCK);
+ debug("### Setting I2C clock Frequency to %lu Hz.\n", i_speed);
+ i2c_init(i_speed);
+#else
+ i2c_init(CONFIG_SYS_I2C_CLOCK);
+#endif
+
printf_P(PSTR("\n(ATMEGA1281+HD64180)_stamp Tester\n"));
main_loop();