}
-
static void z80_setup_dbus_in(void)
{
DDR_DB = 0;
P_DB = 0;
}
+
static void z80_setup_dbus_out(void)
{
DDR_DB = 0xff;
}
+
+static void z80_reset_pulse(void)
+{
+ Z80_O_RST = 0;
+ _delay_us(10);
+ Z80_O_RST = 1;
+}
+
+
void z80_setup_bus(void)
{
/* /ZRESET: Output and low */
z80_setup_dbus_in();
zstate = RESET;
-// Stat &= ~S_Z180_RUNNING;
}
-/*--------------------------------------------------------------------------*/
-#if 0
- switch (zstate) {
- case RESET:
- break;
- case RESET_AQRD:
- break;
- case RUN:
- break;
- case RUN_AQRD:
- break;
- }
-#endif
-/*--------------------------------------------------------------------------*/
-
-#if 0
-void z80_busreq(level_t level)
-{
- Z80_O_BUSREQ = level;
-}
-
-int z80_stat_reset(void)
-{
-// return Z80_O_RESET;
-}
-
-int z80_stat_halt(void)
-{
- return Z80_I_HALT;
-}
-#endif
-
-zstate_t z80_runstate(void)
+zstate_t z80_bus_state(void)
{
return zstate;
}
-void z80_reset(void)
+
+static void z80_busreq_hpulse(void)
{
-#if DEBUG
- zstate_t old = zstate;
-#endif
z80_setup_dbus_in();
z80_setup_addrbus_tristate();
- Z80_O_RST = 0;
- Z80_O_BUSREQ = 1;
- zstate = RESET;
-
- debug("z80_reset: state: %02x --> %02x\n", old, zstate);
-}
-void z80_reset_pulse(void)
-{
-#if DEBUG
- zstate_t old = zstate;
-#endif
- switch (zstate) {
- case RESET:
- case RESET_AQRD:
- break;
-
- case RUN:
- case RUN_AQRD:
- Z80_O_RST = 0;
- _delay_us(10);
- Z80_O_RST = 1;
- break;
+ ATOMIC_BLOCK(ATOMIC_RESTORESTATE) {
+ Z80_O_BUSREQ = 1;
+ Z80_O_BUSREQ = 1; /* 2 AVR clock cycles */
+ Z80_O_BUSREQ = 0; /* 2 AVR clock cycles */
}
- debug("z80_reset_pulse: state: %02x --> %02x\n", old, zstate);
-}
-
-void z80_request_bus(void)
-{
-#if DEBUG
- zstate_t old = zstate;
-#endif
-
- switch (zstate) {
- case RESET:
- Z80_O_BUSREQ = 0;
- Z80_O_RST = 1;
+ if (zstate & ZST_ACQUIRED) {
while(Z80_I_BUSACK == 1)
;
z80_setup_addrbus_active();
- zstate = RESET_AQRD;
- break;
-
- case RESET_AQRD:
- break;
-
- case RUN:
- Z80_O_BUSREQ = 0;
- while(Z80_I_BUSACK == 1);
- z80_setup_addrbus_active();
- zstate = RUN_AQRD;
- break;
-
- case RUN_AQRD:
- break;
}
- debug("z80_request_bus: state: %02x --> %02x\n", old, zstate);
}
-void z80_release_bus(void)
-{
-#if DEBUG
- zstate_t old = zstate;
-#endif
- switch (zstate) {
- case RESET:
- break;
- case RESET_AQRD:
- z80_setup_dbus_in();
- z80_setup_addrbus_tristate();
- Z80_O_RST = 0;
- Z80_O_BUSREQ = 1;
- zstate = RESET;
- break;
- case RUN:
- break;
- case RUN_AQRD:
- z80_setup_dbus_in();
- z80_setup_addrbus_tristate();
- Z80_O_BUSREQ = 1;
- zstate = RUN;
- break;
- }
-
- debug("z80_release_bus: state: %02x --> %02x\n", old, zstate);
-}
/*
- * Do nothing, if we have the bus allready
- *
- * return previous state
- */
-zstate_t z80_request_bus_save(void)
-{
- zstate_t state;
-
- state = z80_runstate();
- if (!(state & ZST_ACQUIRED))
- z80_request_bus();
-
- return state;
-}
-/*
- * Do nothing, if we had the bus before
- */
-void z80_release_bus_save(zstate_t prev)
-{
- if (!(prev & ZST_ACQUIRED))
- z80_release_bus();
-}
+ + | | | | |
+ + State | RESET | RESET_AQRD | RUNNING | RUNNING_AQRD |
+ + | | | | |
+ + | 0 | 1 | 2 | 3 |
+Event + | | | | |
+----------------+---------------+---------------+---------------+---------------+
+ | | | | |
+Reset | 0 | 0 | 0 | 0 |
+ | | | | |
+ | | | | |
+Request | 1 | | 3 | |
+ | | | | |
+ | | | | |
+Release | | 0 | | 2 |
+ | | | | |
+ | | | | |
+Run | 2 | 3 | | |
+ | | | | |
+ | | | | |
+Restart | | | 2 | 3 |
+ | | | | |
+ | | | | |
+M_Cycle | | | | 3 |
+ | | | | |
+ | | | | |
+*/
-void z80_run(void)
+zstate_t z80_bus_cmd(bus_cmd_t cmd)
{
-#if DEBUG
- zstate_t old = zstate;
-#endif
- switch (zstate) {
- case RESET:
- Z80_O_RST = 1;
- zstate = RUN;
- break;
+ switch (cmd) {
- case RESET_AQRD:
+ case Reset:
z80_setup_dbus_in();
z80_setup_addrbus_tristate();
Z80_O_RST = 0;
- _delay_us(10);
- Z80_O_RST = 1;
- z80_setup_addrbus_active();
- zstate = RUN_AQRD;
+ Z80_O_BUSREQ = 1;
+ zstate = RESET;
break;
- case RUN:
- break;
- case RUN_AQRD:
+ case Request:
+ switch (zstate) {
+ case RESET:
+ Z80_O_BUSREQ = 0;
+ Z80_O_RST = 1;
+ while(Z80_I_BUSACK == 1)
+ ;
+ z80_setup_addrbus_active();
+ zstate = RESET_AQRD;
+ break;
+
+ case RUNNING:
+ Z80_O_BUSREQ = 0;
+ while(Z80_I_BUSACK == 1)
+ ;
+ z80_setup_addrbus_active();
+ zstate = RUNNING_AQRD;
+ break;
+
+ default:
+ break;
+ }
break;
- }
- debug("z80_run: state: %02x --> %02x\n", old, zstate);
-}
+ case Release:
+ switch (zstate) {
+ case RESET_AQRD:
+ z80_setup_dbus_in();
+ z80_setup_addrbus_tristate();
+ Z80_O_RST = 0;
+ Z80_O_BUSREQ = 1;
+ zstate = RESET;
+ break;
+ case RUNNING_AQRD:
+ z80_setup_dbus_in();
+ z80_setup_addrbus_tristate();
+ Z80_O_BUSREQ = 1;
+ zstate = RUNNING;
+ break;
+ default:
+ break;
+ }
+ break;
-void z80_busreq_hpulse(void)
-{
- z80_setup_dbus_in();
- z80_setup_addrbus_tristate();
+ case Run:
+ switch (zstate) {
+ case RESET:
+ Z80_O_RST = 1;
+ zstate = RUNNING;
+ break;
+
+ case RESET_AQRD:
+ z80_setup_dbus_in();
+ z80_setup_addrbus_tristate();
+ z80_reset_pulse();
+ z80_setup_addrbus_active();
+ zstate = RUNNING_AQRD;
+ break;
+ default:
+ break;
+ }
+ break;
- ATOMIC_BLOCK(ATOMIC_RESTORESTATE) {
- Z80_O_BUSREQ = 1;
- Z80_O_BUSREQ = 1; /* 2 AVR clock cycles */
- Z80_O_BUSREQ = 0; /* 2 AVR clock cycles */
- }
+ case Restart:
+ switch (zstate) {
+ case RUNNING:
+ case RUNNING_AQRD:
+ z80_reset_pulse();
+ break;
+ default:
+ break;
+ }
+ break;
- if (zstate & ZST_ACQUIRED) {
- while(Z80_I_BUSACK == 1)
- ;
- z80_setup_addrbus_active();
+ case M_Cycle:
+ switch (zstate) {
+ case RUNNING_AQRD:
+ z80_busreq_hpulse();
+ break;
+ default:
+ break;
+ }
}
+ return zstate;
}
+
/*--------------------------------------------------------------------------*/
static
fifo_dsc[f].base = adr;
- z80_request_bus();
+ z80_bus_cmd(Request);
fifo_dsc[f].mask = z80_read(adr + FIFO_BUFSIZE_MASK);
fifo_dsc[f].idx_in = z80_read(adr + FIFO_INDEX_IN);
fifo_dsc[f].idx_out = z80_read(adr + FIFO_INDEX_OUT);
- z80_release_bus();
+ z80_bus_cmd(Release);
}
uint32_t adr = fifo_dsc[f].base + FIFO_INDEX_IN;
uint8_t idx;
- z80_request_bus();
+ z80_bus_cmd(Request);
idx = z80_read(adr);
- z80_release_bus();
+ z80_bus_cmd(Release);
rc = idx == fifo_dsc[f].idx_out;
}
int rc = 1;
if (fifo_dsc[f].base != 0) {
- z80_request_bus();
+ z80_bus_cmd(Request);
rc = ((fifo_dsc[f].idx_in + 1) & fifo_dsc[f].mask)
== z80_read(fifo_dsc[f].base+FIFO_INDEX_OUT);
- z80_release_bus();
+ z80_bus_cmd(Release);
}
return rc;
}
while (z80_memfifo_is_empty(f))
;
- z80_request_bus();
+ z80_bus_cmd(Request);
idx = fifo_dsc[f].idx_out;
rc = z80_read(fifo_dsc[f].base+idx);
fifo_dsc[f].idx_out = ++idx & fifo_dsc[f].mask;
z80_write(fifo_dsc[f].base+FIFO_INDEX_OUT, fifo_dsc[f].idx_out);
- z80_release_bus();
+ z80_bus_cmd(Release);
return rc;
}
while (z80_memfifo_is_full(f))
;
- z80_request_bus();
+ z80_bus_cmd(Request);
idx = fifo_dsc[f].idx_in;
z80_write(fifo_dsc[f].base+idx, val);
fifo_dsc[f].idx_in = ++idx & fifo_dsc[f].mask;
z80_write(fifo_dsc[f].base+FIFO_INDEX_IN, fifo_dsc[f].idx_in);
- z80_release_bus();
+ z80_bus_cmd(Release);
}
/*--------------------------------------------------------------------------*/
DBG_P(1, "z80_init_msg_fifo: %lx\n", addr);
- z80_request_bus();
+ z80_bus_cmd(Request);
z80_write(addr+FIFO_INDEX_OUT, z80_read(addr+FIFO_INDEX_IN));
- z80_release_bus();
+ z80_bus_cmd(Release);
msg_fifo.base = addr;
}
msg_fifo.count = 0;
if (msg_fifo.base != 0) {
- z80_request_bus();
+ z80_bus_cmd(Request);
z80_write(msg_fifo.base+FIFO_INDEX_OUT, msg_fifo.count);
- z80_release_bus();
+ z80_bus_cmd(Release);
}
}
#endif
projects / z180-stamp.git / blobdiff