/*
+ * (C) Copyright 2014 Leo C. <erbl259-lmu@yahoo.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0
*/
#include "common.h"
-
-#include <util/delay.h>
#include <avr/interrupt.h>
+#include <avr/wdt.h>
#include <stdlib.h>
-#include <stdio.h>
#include "config.h"
-#include "debug.h"
+#include "ff.h"
#include "z80-if.h"
#include "i2c.h"
#include "con-utils.h"
#include "timer.h"
#include "cli.h"
#include "env.h"
+#include "z180-serv.h"
+#include "gpio.h"
+#include "time.h"
+#include "rtc.h"
+#include "debug.h"
+#include "cmd_fat.h"
-#define udelay(n) _delay_us(n)
-static uint8_t mcusr;
+uint8_t mcusr __attribute__ ((section (".noinit")));
-/*--------------------------------------------------------------------------*/
#if DEBUG
-
__attribute__ ((naked)) __attribute__ ((section (".init3")))
void preset_ram (void)
{
- for (uint8_t *p = RAMSTART; p <= (uint8_t *) RAMEND; p++)
+ for (uint8_t *p = (uint8_t *) RAMSTART; p <= (uint8_t *) RAMEND; p++)
*p = 0xdd;
}
+#endif
+
+__attribute__ ((naked)) __attribute__ ((section (".init3")))
+void get_mcusr (void)
+{
+ /* save and clear reset reason(s) */
+ /* TODO: move to init section? */
+ mcusr = MCUSR;
+ MCUSR = 0;
+
+ wdt_disable();
+}
+
+/*--------------------------------------------------------------------------*/
+#if DEBUG
static const FLASH char * const FLASH rreasons[] = {
FSTR("Power on"),
uint8_t r = mcusr & 0x1f;
const FLASH char * const FLASH *p = rreasons;
- printf_P(PSTR("### Reset reason(s): %s"), r ? "" : "none");
+ my_puts_P(PSTR("### Reset reason(s): "));
+ if (r == 0)
+ my_puts_P(PSTR("none"));
for ( ; r; p++, r >>= 1) {
if (r & 1) {
my_puts_P(*p);
if (r & ~1)
- printf_P(PSTR(", "));
+ my_puts_P(PSTR(", "));
}
}
- printf_P(PSTR(".\n"));
+ my_puts_P(PSTR(".\n"));
}
#endif
-static
-void setup_avr(void)
+ISR(INT5_vect)
{
- /* save and clear reset reason(s) */
- /* TODO: move to init section? */
- mcusr = MCUSR;
- MCUSR = 0;
+ Stat |= S_MSG_PENDING;
+}
- /* WD */
+ISR(INT6_vect)
+{
+ Stat |= S_CON_PENDING;
+}
+static
+void setup_avr(void)
+{
/* CPU */
/* Disable JTAG Interface regardless of the JTAGEN fuse setting. */
MCUCR = _BV(JTD);
MCUCR = _BV(JTD);
- /* disable unused periphels */
- PRR0 = _BV(PRTIM2) | _BV(PRTIM0) | _BV(PRADC);
+ /* Disable peripherals. Enable individually in respective init function. */
+ PRR0 = _BV(PRTWI) |
+ _BV(PRTIM2) | _BV(PRTIM0) | _BV(PRTIM1) |
+ _BV(PRSPI) | _BV(PRUSART0) | _BV(PRADC);
+
PRR1 = _BV(PRTIM5) | _BV(PRTIM4) | _BV(PRTIM3) |
_BV(PRUSART3) | _BV(PRUSART2) | _BV(PRUSART1);
- /* disable analog comparator */
+
+ /* Disable analog comparator */
ACSR = _BV(ACD);
/* Ports */
CLKPR = _BV(CLKPCE);
CLKPR = 0;
- /* Timer */
+ /* System timer */
+ setup_timer();
- OCR1A = F_CPU / 8 / 1000 - 1; // Timer1: 1000Hz interval (OC1A)
- TCCR1B = 0b00001010;
- TIMSK1 = _BV(OCIE1A); // Enable TC1.oca interrupt
+ /* INT5, INT6: falling edge */
+ EICRB = (EICRB & ~((0b11 << ISC50) | (0b11 << ISC60))) |
+ (0b10 << ISC50) | (0b10 << ISC60);
+ /* Reset pending ints */
+ EIFR |= _BV(INTF5) | _BV(INTF6);
+ /* Enable INT5, and INT6 */
+ EIMSK |= _BV(INT5) | _BV(INT6);
}
static
return (mcusr & _BV(PORF)) != 0;
}
+static
+void setup_system_time(void)
+{
+ struct tm rtc_time;
+
+ rtc_get(&rtc_time);
+ rtc_time.tm_isdst = 0;
+ set_system_time(mk_gmtime(&rtc_time) );
+}
+
+
/*--------------------------------------------------------------------------*/
/* Stored value of bootdelay, used by autoboot_command() */
*/
if (bootdelay >= 0) {
if (tstc()) { /* we got a key press */
- (void) my_getchar(); /* consume input */
+ (void) my_getchar(1); /* consume input */
my_puts_P(PSTR("\b\b\b 0"));
abort = 1; /* don't auto boot */
}
char *s;
int bootdelay;
- bootdelay = (int) getenv_ulong(PSTR("bootdelay"), 10, CONFIG_BOOTDELAY);
+ bootdelay = (int) getenv_ulong(PSTR(ENV_BOOTDELAY), 10, CONFIG_BOOTDELAY);
debug("### main_loop entered: bootdelay=%d\n\n", bootdelay);
_delay_ms(20);
- s = getenv(PSTR("bootcmd"));
+ s = getenv_str(PSTR(ENV_BOOTCMD));
stored_bootdelay = bootdelay;
return s;
}
static
void autoboot_command(const char *s)
{
- debug("### main_loop: bootcmd=\"%s\"\n", s ? s : PSTR("<UNDEFINED>"));
+ debug("### main_loop: bootcmd=\"%s\"\n", s ? s : "");
_delay_ms(20);
if (stored_bootdelay != -1 && s && !abortboot(stored_bootdelay)) {
int main(void)
{
+ extern void setup_mmc(void);
+ __malloc_margin = CONFIG_SYS_MALLOC_MARGIN;
setup_avr();
- z80_setup_bus();
-
+ for (int i = 0; i < GPIO_MAX; i++)
+ gpio_config(i, INPUT_PULLUP);
+ setup_mmc();
env_init();
+ z80_setup_bus();
if (reset_reason_is_power_on())
_delay_ms(CONFIG_PWRON_DELAY);
- serial_setup(getenv_ulong(PSTR("baudrate"), 10, CONFIG_BAUDRATE));
+ serial_setup(getenv_ulong(PSTR(ENV_BAUDRATE), 10, CONFIG_BAUDRATE));
sei();
#if DEBUG
print_reset_reason();
#endif
-#if DEBUG
- unsigned long i_speed = getenv_ulong(PSTR("i2c_clock"), 10, CONFIG_SYS_I2C_CLOCK);
- debug("### Setting I2C clock Frequency to %lu Hz.\n", i_speed);
- i2c_init(i_speed);
-#else
i2c_init(CONFIG_SYS_I2C_CLOCK);
-#endif
+ setup_system_time();
+ setup_fatfs();
- printf_P(PSTR("\n(ATMEGA1281+HD64180)_stamp Tester\n"));
+ printf_P(PSTR("\n" stringify(DEVICE_NAME) "+Z8S180 Stamp Monitor - Version: " VERSION " \n\n"));
+ setup_z180_serv();
main_loop();
}