X-Git-Url: http://cloudbase.mooo.com/gitweb/z180-stamp.git/blobdiff_plain/0f3b947bda5f34662a611272b9f12199e0da9aca..cf343962a20706fd6158ba1be469be93dccdfd9b:/fatfs/documents/doc/dstat.html
diff --git a/fatfs/documents/doc/dstat.html b/fatfs/documents/doc/dstat.html
index e9926bb..a891489 100644
--- a/fatfs/documents/doc/dstat.html
+++ b/fatfs/documents/doc/dstat.html
@@ -25,7 +25,7 @@ DSTATUS disk_status (
Parameter
- pdrv
-- Physical drive number to identify the target device. Always zero at single drive system.
+- Physical drive number to identify the target device. Always zero in single drive system.
@@ -37,9 +37,9 @@ DSTATUS disk_status (
STA_NOINIT
Indicates that the device has not been initialized and not ready to work. This flag is set on system reset, media removal or failure of disk_initialize function. It is cleared on disk_initialize function succeeded. Any media change that occurs asynchronously must be captured and reflect it to the status flags, or auto-mount function will not work correctly. If the system does not support media change detection, application program needs to explicitly re-mount the volume with f_mount function after each media change.
STA_NODISK
-Indicates that no medium in the drive. This is always cleared at fixed disk drive. Note that FatFs does not refer this flag.
+Indicates that no medium in the drive. This is always cleared when the drive is non-removable class. Note that FatFs does not refer this flag.
STA_PROTECT
-Indicates that the medium is write protected. This is always cleared at the drives without write protect function. Not valid if STA_NODISK is set.
+Indicates that the medium is write protected. This is always cleared when the drive has no write protect function. Not valid if STA_NODISK is set.