X-Git-Url: http://cloudbase.mooo.com/gitweb/z180-stamp.git/blobdiff_plain/89adce76dd02f2076ec6de1c6b434bc1f29512f4..2fe283161b59ea1cb419b3711731ea0db343afed:/avr/command_tbl.c

diff --git a/avr/command_tbl.c b/avr/command_tbl.c
index 336e6ea..a2f99da 100644
--- a/avr/command_tbl.c
+++ b/avr/command_tbl.c
@@ -1,12 +1,16 @@
+/*
+ * (C) Copyright 2014 Leo C. <erbl259-lmu@yahoo.de>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
 
 #include "common.h"
-
 #include "command.h"
 #include "cmd_mem.h"
 
-
 extern command_ret_t do_help(cmd_tbl_t *, int, int, char * const []);
 extern command_ret_t do_echo(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_sleep(cmd_tbl_t *, int, int, char * const []);
 extern command_ret_t do_env_print(cmd_tbl_t *, int, int, char * const []);
 extern command_ret_t do_env_default(cmd_tbl_t *, int, int, char * const []);
 extern command_ret_t do_env_set(cmd_tbl_t *, int, int, char * const []);
@@ -19,7 +23,19 @@ extern command_ret_t do_dump_mem(cmd_tbl_t *, int, int, char * const []);
 extern command_ret_t do_eep_cp(cmd_tbl_t *, int, int, char * const []);
 extern command_ret_t do_busreq_pulse(cmd_tbl_t *, int, int, char * const []);
 extern command_ret_t do_date(cmd_tbl_t *, int, int, char * const []);
-extern command_ret_t do_pin(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_gpio(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_sd(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_fat_stat(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_fat_ls(cmd_tbl_t *, int, int, char * const []);
+//extern command_ret_t do_fat_read(cmd_tbl_t *, int, int, char * const []);
+//extern command_ret_t do_fat_write(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_fat_rw(cmd_tbl_t *, int, int, char * const []);
+
+#ifdef CONFIG_SYS_LONGHELP
+const FLASH char sd_help_text[] =
+	"bla \t- do bla\n"
+	;
+#endif /* CONFIG_SYS_LONGHELP */
 
 
 cmd_tbl_t cmd_tbl[] = {
@@ -34,6 +50,7 @@ CMD_TBL_ITEM(
 ),
 
 #ifdef DEBUG
+
 CMD_TBL_ITEM(
 	!mdr,	3,	1,	do_dump_mem,
 	"RAM dump",
@@ -62,6 +79,12 @@ CMD_TBL_ITEM(
 	"[args..]\n"
 	"     - echo args to console; \\c suppresses newline"
 ),
+CMD_TBL_ITEM(
+	sleep ,    2,    1,     do_sleep,
+	"delay execution for some time",
+	"N[m][s]\n"
+	"    - delay execution for decimal N (milli) seconds"
+),
 CMD_TBL_ITEM_COMPLETE(
 	run,	CONFIG_SYS_MAXARGS,	1,	do_run,
 	"run commands in an environment variable",
@@ -127,31 +150,8 @@ CMD_TBL_ITEM(
 	""
 ),
 
-#if 0
-CMD_TBL_ITEM(
-	clock, 2, 0,	do_clock,
-	"Set or get CPU frequency",
-	"\n"
-	"    - print frequency or state of clock pin\n"
-	"clock value[K|M]\n"
-	"    - set frequency of clock pin to value\n"
-	"clock [high|low]\n"
-	"    - set clock pin level high or low"
-),
-CMD_TBL_ITEM(
-	clk2, 3, 0,	do_clock2,
-	"Set or get clk2 frequency",
-	"\n"
-	"    - print frequency or state of clk2 pin\n"
-	"clk2 [-d] value[K|M]\n"
-	"    - set frequency of clk2 pin to value\n"
-	"clk2 [high|low]\n"
-	"    - set clk2 pin level high or low"
-),
-#endif
-
 CMD_TBL_ITEM(
-	pin, CONFIG_SYS_MAXARGS, 0,	do_pin,
+	pin, CONFIG_SYS_MAXARGS, 1,	do_gpio,
 	"Set or query pin state",
 	"[-s] [<pins>]\n"
 	"    - print cofiguration and state or frequency of pins\n"
@@ -199,7 +199,7 @@ CMD_TBL_ITEM(
 	"addr1 addr2 count"
 ),
 CMD_TBL_ITEM(
-	base,	2,	1,	do_mem_base,
+	base,	2,	0,	do_mem_base,
 	"print or set address offset",
 	"\n"
 	"    - print address offset for memory commands\n"
@@ -240,6 +240,43 @@ CMD_TBL_ITEM(
 ),
 #endif /* CONFIG_MX_CYCLIC */
 
+CMD_TBL_ITEM(
+	sd,   CONFIG_SYS_MAXARGS, 1, do_sd,
+	"SD/MMC card handling commands",
+	"<subcommand> args ...\n"
+	"sd help\n"
+	"    - print help on subcommands"
+),
+
+CMD_TBL_ITEM(
+	fatstat,	2,	1,	do_fat_stat,
+	"Show logical drive status",
+	"dev"
+),
+CMD_TBL_ITEM(
+	fatls,	2,	1,	do_fat_ls,
+	"Directory listing",
+	"path"
+),
+CMD_TBL_ITEM(
+	fatload,	5,	0,	do_fat_rw,
+	"load binary file from a dos filesystem",
+	"<d:/path/filename> <addr> [bytes [pos]]\n"
+	"    - Load binary file 'path/filename' on logical drive 'd'\n"
+	"      to address 'addr' from dos filesystem.\n"
+	"      'pos' gives the file position to start loading from.\n"
+	"      If 'pos' is omitted, 0 is used. 'pos' requires 'bytes'.\n"
+	"      'bytes' gives the size to load. If 'bytes' is 0 or omitted,\n"
+	"      the load stops on end of file."
+),
+CMD_TBL_ITEM(
+	fatwrite,	4,	0,	do_fat_rw,
+	"write file into a dos filesystem",
+	"<d:/path/filename> <addr> <bytes>\n"
+	"    - Write file to 'path/filename' on logical drive 'd' from RAM\n"
+	"      starting at address 'addr'. 'bytes' gives the size to load.\n"
+	"      If 'bytes' is 0 or omitted, the load stops on end of file."
+),
 
 CMD_TBL_ITEM(
 	help,	CONFIG_SYS_MAXARGS,	1,	do_help,