X-Git-Url: http://cloudbase.mooo.com/gitweb/z180-stamp.git/blobdiff_plain/b30c4e8f1aef96f6fdc93da9f125545f5f74d06e..89826c563e38a30d5bfc589905eb1202fa14b751:/avr/z80-if.c diff --git a/avr/z80-if.c b/avr/z80-if.c index e36b369..7a953f0 100644 --- a/avr/z80-if.c +++ b/avr/z80-if.c @@ -136,13 +136,18 @@ #define MASK(n) ((1<<(n))-1) #define SMASK(w,s) (MASK(w) << (s)) +void z80_bus_request_or_exit(void) +{ + if (!(z80_bus_cmd(Request) & ZST_ACQUIRED)) + cmd_error(CMD_RET_FAILURE, EBUSTO, NULL); +} static zstate_t zstate; static volatile uint8_t timer; /* used for bus timeout */ static bool reset_polarity; /*---------------------------------------------------------*/ -/* 10Hz timer interrupt generated by OC4A */ +/* 10Hz timer interrupt generated by OC5A */ /*---------------------------------------------------------*/ ISR(TIMER5_COMPA_vect) @@ -346,6 +351,9 @@ zstate_t z80_bus_cmd(bus_cmd_t cmd) z80_addrbus_set_in(); z80_reset_active(); Z80_O_BUSREQ = 1; + timer = BUS_TO; + while (Z80_I_BUSACK == 0 && timer) + ; zstate = RESET; break; @@ -391,12 +399,18 @@ zstate_t z80_bus_cmd(bus_cmd_t cmd) z80_addrbus_set_in(); z80_reset_active(); Z80_O_BUSREQ = 1; + timer = BUS_TO; + while (Z80_I_BUSACK == 0 && timer) + ; zstate = RESET; break; case RUNNING_AQRD: z80_dbus_set_in(); z80_addrbus_set_in(); Z80_O_BUSREQ = 1; + timer = BUS_TO; + while (Z80_I_BUSACK == 0 && timer) + ; zstate = RUNNING; break; default: @@ -407,6 +421,7 @@ zstate_t z80_bus_cmd(bus_cmd_t cmd) case Run: switch (zstate) { case RESET: + _delay_ms(20); /* TODO: */ z80_reset_inactive(); zstate = RUNNING; break; @@ -458,6 +473,41 @@ void z80_setaddress(uint32_t addr) PIN_ADB = (((addr >> 16) << ADB_SHIFT) ^ P_ADB) & MASK(ADB_WIDTH) << ADB_SHIFT; } +int32_t z80_memsize_detect(void) +{ + const uint8_t PATTERN_1 = 0x55; + const uint8_t PATTERN_2 = ~PATTERN_1; + uint32_t addr; + + if (!(z80_bus_cmd(Request) & ZST_ACQUIRED)) + return -EBUSTO; + + uint8_t ram_0 = z80_read(0); + uint8_t ram_1 = z80_read(1); + + z80_write(0, ram_0 ^ 0xff); + z80_write(1, ram_1); + if ((z80_read(0) ^ ram_0) != 0xff) { + addr = 0; + } else { + z80_write(0, PATTERN_1); + for (addr=1; addr < CONFIG_SYS_RAMSIZE_MAX; addr <<= 1) { + uint8_t ram_i = z80_read(addr); + z80_write(addr, PATTERN_2); + if (z80_read(0) != PATTERN_1 || z80_read(addr) != PATTERN_2) + break; + z80_write(addr, ram_i); + } + } + + z80_write(0, ram_0); + z80_bus_cmd(Release); + + return addr; +} + +/*--------------------------------------------------------------------------*/ + void z80_write(uint32_t addr, uint8_t data) { z80_setaddress(addr); @@ -557,6 +607,7 @@ void z80_read_block (uint8_t *dest, uint32_t src, size_t length) Z80_O_MREQ = 1; } +/*--------------------------------------------------------------------------*/ /* 0179' rx.bs_mask: ds 1 ; (buf_len - 1) @@ -697,3 +748,31 @@ void z80_memfifo_putc(fifo_t f, uint8_t val) z80_write(fifo_dsc[f].base+FIFO_INDEX_IN, fifo_dsc[f].idx_in); z80_bus_cmd(Release); } + +/*--------------------------------------------------------------------------*/ + +void z80_load_mem(int_fast8_t verbosity, + const FLASH unsigned char data[], + const FLASH unsigned long *sections, + const FLASH unsigned long address[], + const FLASH unsigned long length_of_sections[]) +{ + uint32_t sec_base = 0; + + if (verbosity > 1) + printf_P(PSTR("Loading Z180 memory... \n")); + + for (unsigned sec = 0; sec < *sections; sec++) { + if (verbosity > 0) { + printf_P(PSTR(" From: 0x%.5lX to: 0x%.5lX (%5li bytes)\n"), + address[sec], + address[sec]+length_of_sections[sec] - 1, + length_of_sections[sec]); + } + + z80_write_block_P((const FLASH unsigned char *) &data[sec_base], /* src */ + address[sec], /* dest */ + length_of_sections[sec]); /* len */ + sec_base += length_of_sections[sec]; + } +}