X-Git-Url: http://cloudbase.mooo.com/gitweb/z180-stamp.git/blobdiff_plain/bbd45c46a75edd930486980c0d6a94c52d8cf403..0dd441e803f3563839541e7526f8294032aa7743:/avr/command_tbl.c diff --git a/avr/command_tbl.c b/avr/command_tbl.c index f030b54..1769714 100644 --- a/avr/command_tbl.c +++ b/avr/command_tbl.c @@ -1,43 +1,24 @@ /* - * (C) Copyright 2014 Leo C. + * (C) Copyright 2014-2016 Leo C. * - * SPDX-License-Identifier: GPL-2.0+ + * SPDX-License-Identifier: GPL-2.0 */ #include "common.h" #include "command.h" #include "cmd_mem.h" - -extern command_ret_t do_help(cmd_tbl_t *, int, int, char * const []); -extern command_ret_t do_echo(cmd_tbl_t *, int, int, char * const []); -extern command_ret_t do_sleep(cmd_tbl_t *, int, int, char * const []); -extern command_ret_t do_env_print(cmd_tbl_t *, int, int, char * const []); -extern command_ret_t do_env_default(cmd_tbl_t *, int, int, char * const []); -extern command_ret_t do_env_set(cmd_tbl_t *, int, int, char * const []); -extern command_ret_t do_env_save(cmd_tbl_t *, int, int, char * const []); -extern command_ret_t do_loadf(cmd_tbl_t *, int, int, char * const []); -extern command_ret_t do_loadcpm3(cmd_tbl_t *, int, int, char * const []); -extern command_ret_t do_loadihex(cmd_tbl_t *, int, int, char * const []); -extern command_ret_t do_go(cmd_tbl_t *, int, int, char * const []); -extern command_ret_t do_restart(cmd_tbl_t *, int, int, char * const []); -extern command_ret_t do_console(cmd_tbl_t *, int, int, char * const []); -extern command_ret_t do_dump_mem(cmd_tbl_t *, int, int, char * const []); -extern command_ret_t do_eep_cp(cmd_tbl_t *, int, int, char * const []); -extern command_ret_t do_busreq_pulse(cmd_tbl_t *, int, int, char * const []); -extern command_ret_t do_date(cmd_tbl_t *, int, int, char * const []); -extern command_ret_t do_gpio(cmd_tbl_t *, int, int, char * const []); -extern command_ret_t do_sd(cmd_tbl_t *, int, int, char * const []); -extern command_ret_t do_fat_stat(cmd_tbl_t *, int, int, char * const []); -extern command_ret_t do_fat_ls(cmd_tbl_t *, int, int, char * const []); -//extern command_ret_t do_fat_read(cmd_tbl_t *, int, int, char * const []); -//extern command_ret_t do_fat_write(cmd_tbl_t *, int, int, char * const []); -extern command_ret_t do_fat_rw(cmd_tbl_t *, int, int, char * const []); - -#ifdef CONFIG_SYS_LONGHELP -const FLASH char sd_help_text[] = - "bla \t- do bla\n" - ; -#endif /* CONFIG_SYS_LONGHELP */ +#include "cmd_boot.h" +#include "cmd_misc.h" +#include "cmd_date.h" +#include "cmd_run.h" +#include "cmd_loadcpm3.h" +#include "cmd_loadihex.h" +#include "cmd_gpio.h" +#include "cmd_sd.h" +#include "cmd_fat.h" +#include "cmd_attach.h" +#include "env.h" +#include "debug.h" cmd_tbl_t cmd_tbl[] = { @@ -45,7 +26,7 @@ cmd_tbl_t cmd_tbl[] = { CMD_TBL_ITEM( date, 2, 1, do_date, "get/set date & time", - "[MMDDhhmm[[CC]YY][.ss]]\ndate reset\n" + "[MMDDhhmm[[CC]YY][.ss]]\n" " - without arguments: print date & time\n" " - with numeric argument: set the system date & time\n" ), @@ -53,20 +34,45 @@ CMD_TBL_ITEM( #ifdef DEBUG CMD_TBL_ITEM( - !mdr, 3, 1, do_dump_mem, + !mdr, 3, CTBL_DBG|CTBL_RPT, do_dump_mem, "RAM dump", "address [count]" ), CMD_TBL_ITEM( - !mde, 3, 1, do_dump_mem, + !mde, 3, CTBL_DBG|CTBL_RPT, do_dump_mem, "EEPROM dump", "address [count]" ), CMD_TBL_ITEM( - !cpe, 4, 0, do_eep_cp, + !mdf, 3, CTBL_DBG|CTBL_RPT, do_dump_mem, + "FLASH dump", + "address [count]" +), +CMD_TBL_ITEM( + !cpe, 4, CTBL_DBG, do_eep_cp, "EEPROM copy", "source target count" ), +CMD_TBL_ITEM( + !mm, 2, CTBL_DBG|CTBL_RPT, do_mem_mm_avr, + "avr memory modify (auto-incrementing address)", + "address" +), +CMD_TBL_ITEM( + !nm, 2, CTBL_DBG|CTBL_RPT, do_mem_nm_avr, + "avr memory modify (constant address)", + "address" +), +CMD_TBL_ITEM( + !prfree, 1, CTBL_DBG|CTBL_RPT, do_pr_free_avr, + "print avr heap free list", + "" +), +CMD_TBL_ITEM( + !prheap, 1, CTBL_DBG, do_pr_heap_avr, + "dump avr heap", + "" +), #endif CMD_TBL_ITEM( mstep, 2, 1, do_busreq_pulse, @@ -78,8 +84,8 @@ CMD_TBL_ITEM( echo, CONFIG_SYS_MAXARGS, 1, do_echo, "display a line of text", "[-n] [argument ...]\n" - " - echo the argument(s) to console.\n" - " -n do not output the trailing newline" + "- echo the argument(s) to console.\n" + " -n do not output the trailing newline" ), CMD_TBL_ITEM( sleep , 2, 1, do_sleep, @@ -94,6 +100,13 @@ CMD_TBL_ITEM_COMPLETE( " - run the commands in the environment variable(s) 'var'", var_complete ), +CMD_TBL_ITEM_COMPLETE( + source, CONFIG_SYS_MAXARGS, 1, do_source, + "run commands from a file", + "filename\n" + " - run the commands in the script file 'filename'", + var_complete +), CMD_TBL_ITEM_COMPLETE( printenv, CONFIG_SYS_MAXARGS, 1, do_env_print, "print environment variables", @@ -128,13 +141,38 @@ CMD_TBL_ITEM( "load srec_cat prepared image from controller flash", "" ), +CMD_TBL_ITEM( + bootcf, CONFIG_SYS_MAXARGS, 0, do_bootcf, + "boot from cf card", + "[options]\n" + " Load a number of sectors from the first CP/M partition and jump to\n" + " the load address.\n" + " -a ADDRESS\n" + " Load and start address (default 100 hex)\n" + " -s NUM\n" + " First sector of partition to load (0..255, default 0)\n" + " -c NUM\n" + " Number of sectors to load (1..127, default 7)\n" + " -i NUM\n" + " Partition type to look for (default 52 hex)\n" + " -n\n" + " Load only, do not execute\n" + " -t NUM\n" + " Timeout for IDE commands (1..65535, default 10000)\n" + " -v verbose\n" + " TODO: be verbose" +), CMD_TBL_ITEM( loadcpm3, 3, 0, do_loadcpm3, "load CPM3.SYS file", - "[offset] [filename]\n" + "[filename [common-base [banked-base]]] \n" " - Load CP/M 3 system file from FAT filesystem. This command makes\n" - " CPMLDR superfluous. Default filename is '"CONFIG_PATH_CPM3SYS"', but\n" - " uses environment variable '"ENV_PATH_CPM3SYS"', if set." + " CPMLDR superfluous. Uses the following environment variables if set:\n" + " '"ENV_CPM3_SYSFILE"' File to load. Default is '"CONFIG_CPM3_SYSFILE"'.\n" + " '"ENV_CPM3_BANKED_BASE"' Default is '"CONFIG_CPM3_BANKED_BASE_STR"'.\n" + " Sets the following environment variables after loading:\n" + " '"ENV_CPM3_COMMON_BASE"'\n" + " '"ENV_STARTADDRESS"'" ), CMD_TBL_ITEM( loadi, 2, 0, do_loadihex, @@ -142,6 +180,27 @@ CMD_TBL_ITEM( "[[-]offset]\n" " - load Intel-Hex-Record file over serial line with offset 'offset'" ), + +#if defined(CONFIG_CMD_LOADB) +CMD_TBL_ITEM( + loadb, 1, 0, do_load_serial_bin, + "load binary file over serial line (kermit mode)", + " - load binary file over serial line" +), + +CMD_TBL_ITEM( + loadx, 1, 0, do_load_serial_bin, + "load binary file over serial line (xmodem mode)", + " - load binary file over serial line" +), + +CMD_TBL_ITEM( + loady, 1, 0, do_load_serial_bin, + "load binary file over serial line (ymodem mode)", + " - load binary file over serial line" +), +#endif /* CONFIG_CMD_LOADB */ + CMD_TBL_ITEM( go, 2, 0, do_go, "start application at address 'addr'", @@ -163,7 +222,11 @@ CMD_TBL_ITEM( CMD_TBL_ITEM( connect, 1, 0, do_console, "Connect to CPU console i/o", - "" + "\n" + " - type the escape character followed by Q to close the connection, \n" + " or followed by ? to see other options. The default escape character \n" + " is Ctrl-^ (0x1E). It can be changed by setting env var '"ENV_ESC_CHAR"'." + ), CMD_TBL_ITEM( @@ -185,32 +248,35 @@ CMD_TBL_ITEM( ), CMD_TBL_ITEM( - md, 3, 1, do_mem_md, + md, 3, CTBL_RPT, do_mem_md, "memory display", "address [# of objects]" ), CMD_TBL_ITEM( - mm, 2, 1, do_mem_mm, + mm, 2, CTBL_RPT, do_mem_mm, "memory modify (auto-incrementing address)", "address" ), CMD_TBL_ITEM( - nm, 2, 1, do_mem_nm, + nm, 2, CTBL_RPT, do_mem_nm, "memory modify (constant address)", "address" ), CMD_TBL_ITEM( - mw, 4, 1, do_mem_mw, + mw, CONFIG_SYS_MAXARGS, CTBL_RPT, do_mem_mw, "memory write (fill)", - "address value [count]" + "[-bwl] address value [count]\n" + " -b write value as byte (8 bit, default)\n" + " -w write value as word (16 bit)\n" + " -l write value as long (32 bit)" ), CMD_TBL_ITEM( - cp, 4, 1, do_mem_cp, + cp, 4, CTBL_RPT, do_mem_cp, "memory copy", "source target count" ), CMD_TBL_ITEM( - cmp, 4, 1, do_mem_cmp, + cmp, 4, CTBL_RPT, do_mem_cmp, "memory compare", "addr1 addr2 count" ), @@ -223,19 +289,19 @@ CMD_TBL_ITEM( " - set address offset for memory commands to 'offset'" ), CMD_TBL_ITEM( - mloop, 3, 1, do_mem_loop, + mloop, 3, CTBL_RPT, do_mem_loop, "infinite loop on address range", "address number_of_bytes" ), CMD_TBL_ITEM( - mloopw, 4, 1, do_mem_loopw, + mloopw, 4, CTBL_RPT, do_mem_loopw, "infinite write loop on address range", "address number_of_bytes data_to_write" ), #ifdef CONFIG_CMD_MEMTEST CMD_TBL_ITEM( - mtest, 4, 1, do_mem_mtest, + mtest, 4, CTBL_RPT, do_mem_mtest, "simple RAM read/write test", "[start [end [iterations]]]" ), @@ -243,57 +309,69 @@ CMD_TBL_ITEM( #ifdef CONFIG_MX_CYCLIC CMD_TBL_ITEM( - mdc, 4, 1, do_mem_mdc, + mdc, 4, CTBL_RPT, do_mem_mdc, "memory display cyclic", "address count delay(ms)" ), CMD_TBL_ITEM( - mwc, 4, 1, do_mem_mdc, + mwc, CONFIG_SYS_MAXARGS, CTBL_RPT, do_mem_mdc, "memory write cyclic", - "address value delay(ms)" + "[-bwl] address value delay(ms)\n" + " -b write value as byte (8 bit, default)\n" + " -w write value as word (16 bit)\n" + " -l write value as long (32 bit)" ), #endif /* CONFIG_MX_CYCLIC */ -CMD_TBL_ITEM( - sd, CONFIG_SYS_MAXARGS, 1, do_sd, +CMD_TBL_ITEM_TOP( + sd, CONFIG_SYS_MAXARGS, CTBL_SUBCMDAUTO, do_sd, "SD/MMC card handling commands", " args ...\n" "sd help\n" - " - print help on subcommands" -), - -CMD_TBL_ITEM( - fatstat, 2, 1, do_fat_stat, - "Show logical drive status", - "dev" + " - print help on subcommands", + cmd_tbl_sd ), -CMD_TBL_ITEM( - fatls, 2, 1, do_fat_ls, - "Directory listing", - "path" +CMD_TBL_ITEM_TOP( + fat, CONFIG_SYS_MAXARGS, CTBL_SUBCMD|CTBL_SUBCMDAUTO, do_fat, + "fat filesystem commands", + " args ...\n" + "fat help\n" + " - print help on subcommands", + cmd_tbl_fat ), + CMD_TBL_ITEM( - fatload, 5, 0, do_fat_rw, - "load binary file from a dos filesystem", - " [bytes [pos]]\n" - " - Load binary file 'path/filename' on logical drive 'd'\n" - " to address 'addr' from dos filesystem.\n" - " 'pos' gives the file position to start loading from.\n" - " If 'pos' is omitted, 0 is used. 'pos' requires 'bytes'.\n" - " 'bytes' gives the size to load. If 'bytes' is 0 or omitted,\n" - " the load stops on end of file." + attach, CONFIG_SYS_MAXARGS, CTBL_RPT, do_attach, + "attach filesystem image file to CP/M drive", + "[-rw] [-o options] dsk diskfile\n" + " Attach diskfile to dsk, where n in 0..7\n" + " -r File is read only (write protected)\n" + " -w File is read/write (default)\n" + " -o options\n" + " Options is a comma-separated list of\n" + " ro, rw, debug, nodebug\n" + "\n" + "attach [-rw] -o reattach[,other options] dsk\n" + " Change options for dsk.\n" + " Options as above.\n" + "\n" + "attach -d -a|dsk\n" + "detach -a|dsk\n" + " Detach diskfile from dsk.\n" + " -a Detach all.\n" + "\n" + "attach\n" + " Without arguments, list current assignments" ), CMD_TBL_ITEM( - fatwrite, 4, 0, do_fat_rw, - "write file into a dos filesystem", - " \n" - " - Write file to 'path/filename' on logical drive 'd' from RAM\n" - " starting at address 'addr'. 'bytes' gives the size to load.\n" - " If 'bytes' is 0 or omitted, the load stops on end of file." + detach, 2, 0, do_attach, + "detach file from CP/M drive", + "dsk]\n" + " - alias for 'attach -d dsk'" ), CMD_TBL_ITEM( - help, CONFIG_SYS_MAXARGS, 1, do_help, + help, CONFIG_SYS_MAXARGS, 0, do_help, "print command description/usage", "\n" " - print brief description of all commands\n" @@ -307,10 +385,11 @@ CMD_TBL_ITEM( #ifdef CONFIG_SYS_LONGHELP FSTR(""), #endif /* CONFIG_SYS_LONGHELP */ + NULL, #ifdef CONFIG_AUTO_COMPLETE - 0, + NULL, #endif }, /* Mark end of table */ -{ 0 }, +CMD_TBL_END(cmd_tbl) };