X-Git-Url: http://cloudbase.mooo.com/gitweb/z180-stamp.git/blobdiff_plain/cb4fb1ed02b59f798368a76f2596d7c24125e68a..db6a28d817d6430b5774aedab7e1b8715e358d46:/avr/command_tbl.c

diff --git a/avr/command_tbl.c b/avr/command_tbl.c
index 944c1c4..8c3fb76 100644
--- a/avr/command_tbl.c
+++ b/avr/command_tbl.c
@@ -16,6 +16,7 @@ extern command_ret_t do_env_default(cmd_tbl_t *, int, int, char * const []);
 extern command_ret_t do_env_set(cmd_tbl_t *, int, int, char * const []);
 extern command_ret_t do_env_save(cmd_tbl_t *, int, int, char * const []);
 extern command_ret_t do_loadf(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_bootcf(cmd_tbl_t *, int, int, char * const []);
 extern command_ret_t do_loadcpm3(cmd_tbl_t *, int, int, char * const []);
 extern command_ret_t do_loadihex(cmd_tbl_t *, int, int, char * const []);
 #if defined(CONFIG_CMD_LOADB)
@@ -35,9 +36,9 @@ extern command_ret_t do_sd(cmd_tbl_t *, int, int, char * const []);
 extern command_ret_t do_fat_stat(cmd_tbl_t *, int, int, char * const []);
 extern command_ret_t do_fat_ls(cmd_tbl_t *, int, int, char * const []);
 extern command_ret_t do_fat_rw(cmd_tbl_t *, int, int, char * const []);
-extern command_ret_t do_run(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
-extern command_ret_t do_source(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
-extern command_ret_t do_attach(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
+extern command_ret_t do_run(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_source(cmd_tbl_t *, int, int, char * const []);
+extern command_ret_t do_attach(cmd_tbl_t *, int, int, char * const []);
 
 #ifdef CONFIG_SYS_LONGHELP
 const FLASH char sd_help_text[] =
@@ -156,6 +157,27 @@ CMD_TBL_ITEM(
 	"load srec_cat prepared image from controller flash",
 	""
 ),
+CMD_TBL_ITEM(
+	bootcf,	CONFIG_SYS_MAXARGS,	0,	do_bootcf,
+	"boot from cf card",
+	"[options]\n"
+	"    Load a number of sectors from the first CP/M partition and jump to\n"
+	"    the load address.\n"
+	"    -a ADDRESS\n"
+	"            Load and start address (default 100 hex)\n"
+	"    -s NUM\n"
+	"            First sector of partition to load (0..255, default 0)\n"
+	"    -c NUM\n"
+	"            Number of sectors to load (1..127, default 7)\n"
+	"    -i NUM\n"
+	"            Partition type to look for (default 52 hex)\n"
+	"    -n\n"
+	"            Load only, do not execute\n"
+	"    -t NUM\n"
+	"            Timeout for IDE commands (1..65535, default 10000)\n"
+	"    -v verbose\n"
+	"            TODO: be verbose"
+),
 CMD_TBL_ITEM(
 	loadcpm3, 3,	0,	do_loadcpm3,
 	"load CPM3.SYS file",
@@ -353,18 +375,31 @@ CMD_TBL_ITEM(
 CMD_TBL_ITEM(
 	attach,	CONFIG_SYS_MAXARGS,	1,	do_attach,
 	"attach filesystem image file to CP/M drive",
-	"[options] [dsk<n> <d:/path/filename>]\n"
-	"    - attach drive number <n> to diskfile <d:/path/filename>\n"
-	"attach -d dsk<n>\n"
-	"    - detach drive\n"
+	"[-rw] [-o options] dsk<n> diskfile\n"
+	"    Attach diskfile to dsk<n>, where n in 0..7\n"
+	"    -r      File is read only (write protected)\n"
+	"    -w      File is read/write (default)\n"
+	"    -o options\n"
+	"            Options is a comma-separated list of\n"
+	"            ro, rw, debug, nodebug\n"
+	"\n"
+	"attach [-rw] -o reattach[,other options] dsk<n>\n"
+	"    Change options for dsk<n>.\n"
+	"    Options as above.\n"
+	"\n"
+	"attach -d -a|dsk<n>\n"
+	"detach -a|dsk<n>\n"
+	"    Detach diskfile from dsk<n>.\n"
+	"    -a      Detach all.\n"
+	"\n"
 	"attach\n"
-	"    - without arguments, list current assignments"
+	"    Without arguments, list current assignments\n"
 ),
 CMD_TBL_ITEM(
 	detach,	2,	1,	do_attach,
 	"detach file from CP/M drive",
 	"dsk<n>]\n"
-	"    - same as attach -d dsk<n>"
+	"    - alias for 'attach -d dsk<n>'"
 ),
 
 CMD_TBL_ITEM(