Version 1.6.9: added pressed/released detection to FDC protocol.

git-svn-id: svn://mikrocontroller.net/irmp@36 aeb2e35e-bfc4-4214-b83c-9e8de998ed28

1 files changed, 36 insertions, 13 deletions

diff --git a/irmpconfig.h b/irmpconfig.h
index 6fa6fdd..6244c94 100644
--- a/irmpconfig.h
+++ b/irmpconfig.h
@@ -3,7 +3,7 @@
  *

  * Copyright (c) 2010 Frank Meyer - frank(at)fli4l.de

  *

- * $Id: irmpconfig.h,v 1.27 2010/06/22 12:39:51 fm Exp $

+ * $Id: irmpconfig.h,v 1.28 2010/06/22 15:41:38 fm Exp $

  *

  * ATMEGA88 @ 8 MHz

  *

@@ -18,7 +18,9 @@
 #define _IRMPCONFIG_H_

 

 /*---------------------------------------------------------------------------------------------------------------------------------------------------

- * Change F_INTERRUPTS if you change the number of interrupts per second, F_INTERRUPTS should be in the range from 10000 to 15000

+ * Change F_INTERRUPTS if you change the number of interrupts per second,

+ * Normally, F_INTERRUPTS should be in the range from 10000 to 15000.

+ * A value above 15000 costs additional program space, absolut maximum value is 20000.

  *---------------------------------------------------------------------------------------------------------------------------------------------------

  */

 #ifndef F_INTERRUPTS

@@ -28,38 +30,59 @@
 /*---------------------------------------------------------------------------------------------------------------------------------------------------

  * Change settings from 1 to 0 if you want to disable one or more decoders.

  * This saves program space.

+ *

  * 1 enable  decoder

  * 0 disable decoder

+ *

+ * If you want to use FDC or RCCAR simultaneous with RC5 protocol, additional program space is required.

+ * If you don't need RC5 when using FDC/RCCAR, you should disable RC5.

  *---------------------------------------------------------------------------------------------------------------------------------------------------

  */

-#define IRMP_SUPPORT_SIRCS_PROTOCOL             1       // flag: support SIRCS                 uses ~100 bytes

+

+// Standard protocols: default is enabled. Change to 0 to save program space:

+

+#define IRMP_SUPPORT_SIRCS_PROTOCOL             1       // flag: support Sony SIRCS            uses ~100 bytes

 #define IRMP_SUPPORT_NEC_PROTOCOL               1       // flag: support NEC + APPLE           uses ~250 bytes

 #define IRMP_SUPPORT_SAMSUNG_PROTOCOL           1       // flag: support Samsung + Samsung32   uses ~250 bytes

 #define IRMP_SUPPORT_MATSUSHITA_PROTOCOL        1       // flag: support Matsushita            uses  ~50 bytes

 #define IRMP_SUPPORT_KASEIKYO_PROTOCOL          1       // flag: support Kaseikyo              uses  ~50 bytes

-#define IRMP_SUPPORT_RECS80_PROTOCOL            1       // flag: support RECS80                uses  ~50 bytes

-#define IRMP_SUPPORT_RC5_PROTOCOL               1       // flag: support RC5                   uses ~250 bytes

 #define IRMP_SUPPORT_DENON_PROTOCOL             1       // flag: support DENON                 uses ~250 bytes

-#define IRMP_SUPPORT_RC6_PROTOCOL               1       // flag: support RC6                   uses ~200 bytes

-#define IRMP_SUPPORT_RECS80EXT_PROTOCOL         1       // flag: support RECS80EXT             uses  ~50 bytes

-#define IRMP_SUPPORT_NUBERT_PROTOCOL            1       // flag: support NUBERT                uses  ~50 bytes

-#define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL      1       // flag: support Bang & Olufsen        uses ~200 bytes

-#define IRMP_SUPPORT_GRUNDIG_PROTOCOL           1       // flag: support Grundig               uses ~150 bytes

-#define IRMP_SUPPORT_NOKIA_PROTOCOL             1       // flag: support Nokia                 uses ~150 bytes

+

+

+// Non-standard protocols: default is disabled. Change to 1 to enable decoder:

+

+#define IRMP_SUPPORT_RC5_PROTOCOL               0       // flag: support RC5                   uses ~250 bytes

+#define IRMP_SUPPORT_RC6_PROTOCOL               0       // flag: support RC6                   uses ~200 bytes

+#define IRMP_SUPPORT_GRUNDIG_PROTOCOL           0       // flag: support Grundig               uses ~150 bytes

+#define IRMP_SUPPORT_NOKIA_PROTOCOL             0       // flag: support Nokia                 uses ~150 bytes

+#define IRMP_SUPPORT_NUBERT_PROTOCOL            0       // flag: support NUBERT                uses  ~50 bytes

+#define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL      0       // flag: support Bang & Olufsen        uses ~200 bytes

 #define IRMP_SUPPORT_FDC_PROTOCOL               0       // flag: support FDC3402 keyboard      uses  ~50/400 bytes

 #define IRMP_SUPPORT_RCCAR_PROTOCOL             0       // flag: support RC car                uses ~150/500 bytes

 

 /*---------------------------------------------------------------------------------------------------------------------------------------------------

- * THE FOLLOWING DECODERS WORK ONLY FOR F_INTERRUPTS > 14500!

+ * THE FOLLOWING DECODERS WORK ONLY FOR F_INTERRUPTS >= 14500!

  *---------------------------------------------------------------------------------------------------------------------------------------------------

  */

 #if F_INTERRUPTS >= 14500

-#define IRMP_SUPPORT_SIEMENS_PROTOCOL           1       // flag: support Siemens Gigaset       uses ~150 bytes

+#define IRMP_SUPPORT_SIEMENS_PROTOCOL           0       // flag: support Siemens Gigaset       uses ~150 bytes

 #else

 #define IRMP_SUPPORT_SIEMENS_PROTOCOL           0       // DO NOT CHANGE! F_INTERRUPTS too low!

 #endif

 

 /*---------------------------------------------------------------------------------------------------------------------------------------------------

+ * THE FOLLOWING DECODERS WORK ONLY FOR F_INTERRUPTS >= 20000!

+ *---------------------------------------------------------------------------------------------------------------------------------------------------

+ */

+#if F_INTERRUPTS >= 20000

+#define IRMP_SUPPORT_RECS80_PROTOCOL            0       // flag: support RECS80                uses  ~50 bytes

+#define IRMP_SUPPORT_RECS80EXT_PROTOCOL         0       // flag: support RECS80EXT             uses  ~50 bytes

+#else

+#define IRMP_SUPPORT_RECS80_PROTOCOL            0       // DO NOT CHANGE! F_INTERRUPTS too low!

+#define IRMP_SUPPORT_RECS80EXT_PROTOCOL         0       // DO NOT CHANGE! F_INTERRUPTS too low!

+#endif

+

+/*---------------------------------------------------------------------------------------------------------------------------------------------------

  * Change hardware pin here:

  *---------------------------------------------------------------------------------------------------------------------------------------------------

  */