diff options
Diffstat (limited to 'main.c')
| -rw-r--r-- | main.c | 51 |
1 files changed, 50 insertions, 1 deletions
@@ -3,7 +3,7 @@ *
* Copyright (c) 2009-2013 Frank Meyer - frank(at)fli4l.de
*
- * $Id: main.c,v 1.17 2013/01/17 07:33:14 fm Exp $
+ * $Id: main.c,v 1.18 2014/07/01 07:50:33 fm Exp $
*
* This demo module is runnable on AVRs and LM4F120 Launchpad (ARM Cortex M4)
*
@@ -140,4 +140,53 @@ main (void) }
}
+/*---------------------------------------------------------------------------------------------------------------------------------------------------
+ * PIC18F4520 with XC8 compiler:
+ *---------------------------------------------------------------------------------------------------------------------------------------------------
+ */
+#elif defined (__XC8)
+
+#define _XTAL_FREQ 32000000UL // 32MHz clock
+#define FOSC _XTAL_FREQ
+#define FCY FOSC / 4UL // --> 8MHz
+
+#define BAUDRATE 19200UL
+#define BRG (( FCY 16 BAUDRATE ) -1UL)
+
+#include <stdio.h>
+#include <stdlib.h>
+
+int
+main (void)
+{
+ IRMP_DATA irmp_data;
+
+ irmp_init(); // initialize irmp
+
+ // infinite loop, interrupts will blink PORTD pins and handle UART communications.
+ while (1)
+ {
+ LATBbits.LATB0 = ~LATBbits.LATB0;
+
+ if (irmp_get_data (&irmp_data))
+ {
+ // ir signal decoded, do something here...
+ // irmp_data.protocol is the protocol, see irmp.h
+ // irmp_data.address is the address/manufacturer code of ir sender
+ // irmp_data.command is the command code
+ // irmp_protocol_names[irmp_data.protocol] is the protocol name (if enabled, see irmpconfig.h)
+ printf("proto %d addr %d cmd %d\n", irmp_data.protocol, irmp_data.address, irmp_data.command );
+ }
+ }
+}
+
+void interrupt high_priority high_isr(void)
+{
+ if (TMR2IF)
+ {
+ TMR2IF = 0; // clear Timer 0 interrupt flag
+ irmp_ISR();
+ }
+}
+
#endif
|