diff options
Diffstat (limited to 'avr/cmd_cpu.c')
-rw-r--r-- | avr/cmd_cpu.c | 658 |
1 files changed, 197 insertions, 461 deletions
diff --git a/avr/cmd_cpu.c b/avr/cmd_cpu.c index e5158fd..07d2774 100644 --- a/avr/cmd_cpu.c +++ b/avr/cmd_cpu.c @@ -5,7 +5,6 @@ */ #include "cmd_cpu.h" -//#include <ctype.h> #include <util/atomic.h> #include "z80-if.h" @@ -21,6 +20,25 @@ #include "../z180/cpuinfo.h" #undef const +#define DEBUG_CPU 1 /* set to 1 to debug */ + +#define debug_cpu(fmt, args...) \ + debug_cond(DEBUG_CPU, fmt, ##args) + +static +char * ulltoa (uint64_t val, char *s) +{ + char *p = s; + + while (val >= 10) { + *p++ = (val % 10) + '0'; + val = val / 10; + } + *p++ = val + '0'; + *p = '\0'; + + return strrev(s); +} /* * delay for <count> ms... @@ -32,56 +50,41 @@ static void test_delay(uint32_t count) while (get_timer(ts) <= count); } -uint32_t z80_measure_phi(uint_fast8_t cycles) +static uint32_t z80_measure_phi(uint_fast8_t cycles) { uint16_t ref_stop; uint16_t ref_ovfl; uint8_t x_ovfl; - uint8_t eimsk_save,eicrb_save; uint32_t x_freq; - ATOMIC_BLOCK(ATOMIC_FORCEON) { - /* Save state and disable INT6 */ - eimsk_save = EIMSK; - EIMSK &= ~_BV(INT6); - /* Save state and set INT6 for falling edge */ - eicrb_save = EICRB; - EICRB = (eicrb_save & ~(0b11 << ISC60)) | (0b10 << ISC60); - } - PRR1 &= ~_BV(PRTIM3); TCCR3A = 0; - TCCR3B = 0b000<<CS30; /* stop counter */ + TCCR3B = 0b000<<CS30; /* stop counter */ TCNT3 = 0; x_ovfl = 0; TIFR3 = _BV(TOV3); ref_ovfl = 0; ATOMIC_BLOCK(ATOMIC_FORCEON) { - /* Reset pending int */ - EIFR = _BV(INTF6); - /* Wait for falling edge */ - while ((EIFR & _BV(INTF6)) == 0) + EIFR = _BV(INTF6); /* Reset pending int */ + while ((EIFR & _BV(INTF6)) == 0) /* Wait for falling edge */ ; - TCCR3B = 0b110<<CS30; /* Count falling edges on T3 (==INT6) */ OCR4B = TCNT4; - TIFR4 = _BV(OCF4B); /* clear compare match flag */ - } - while (ref_ovfl < 60) { - ATOMIC_BLOCK(ATOMIC_FORCEON) { + TCCR3B = 0b110<<CS30; /* Count falling edges on T3 (==INT6) */ + TIFR4 = _BV(OCF4B); /* clear compare match flag */ + + while (ref_ovfl < 60) { if ((TIFR4 & _BV(OCF4B)) != 0) { TIFR4 = _BV(OCF4B); - ref_ovfl++; + ++ref_ovfl; } if ((TIFR3 & _BV(TOV3)) != 0) { TIFR3 = _BV(TOV3); - x_ovfl++; + ++x_ovfl; } } - } - ATOMIC_BLOCK(ATOMIC_FORCEON) { EIFR = _BV(INTF6); for (;;) { if (EIFR & _BV(INTF6)) { @@ -91,7 +94,7 @@ uint32_t z80_measure_phi(uint_fast8_t cycles) } if ((TIFR4 & _BV(OCF4B)) != 0) { TIFR4 = _BV(OCF4B); - ref_ovfl++; + ++ref_ovfl; } } } @@ -101,359 +104,201 @@ uint32_t z80_measure_phi(uint_fast8_t cycles) x_ovfl++; } - ATOMIC_BLOCK(ATOMIC_FORCEON) { - /* Restore INT6 */ - EICRB = eicrb_save; - if ((eimsk_save & _BV(INT6)) != 0) - EIMSK |= _BV(INT6); - /* Reset pending int */ - EIFR = _BV(INTF6); - } - uint32_t ref_cnt = (ref_stop - OCR4B) + ((uint32_t)ref_ovfl << 16); uint32_t x_cnt = TCNT3 + ((uint32_t) x_ovfl << 16); uint64_t x_tmp = (uint64_t) 100000 * (x_cnt * cycles); - debug("TCNT3: %6u, ref_cnt: %9lu\n", TCNT3, ref_cnt); - debug("x_tmp: %lu %lu\n", (uint32_t) (x_tmp >> 32), (uint32_t) (x_tmp & 0xffffffff)); + /* Stop Timer */ + TCCR3B = 0; + PRR1 |= _BV(PRTIM3); + +// char x_tmp_str[21]; +// +// debug_cpu("TCNT3: %6u, ref_cnt: %9lu\n", TCNT3, ref_cnt); +// ulltoa(x_tmp, x_tmp_str); +// debug_cpu("x_tmp: %s\n", x_tmp_str); x_tmp = (x_tmp * getenv_ulong(PSTR(ENV_FMON), 10, F_CPU) + (ref_cnt / 2)) / ref_cnt; - debug("x_tmp: %lu %lu\n", (uint32_t) (x_tmp >> 32), (uint32_t) (x_tmp & 0xffffffff)); +// ulltoa(x_tmp, x_tmp_str); +// debug_cpu("x_tmp: %s\n", x_tmp_str); /* round to 5 decimal digits */ int_fast8_t sc = 5; - while (x_tmp >= 100000) { - x_tmp = (x_tmp + 5)/10; - sc--; - } + for ( ; sc > 0 || x_tmp >= 100000; sc--) x_tmp = (x_tmp + 5)/10; x_freq = x_tmp; - while (sc < 0) { - x_freq *= 10; - sc++; - } - x_freq += (uint32_t) sc << 28; - - - /* Stop Timer */ - TCCR3B = 0; - PRR1 |= _BV(PRTIM3); + for ( ; sc < 0; sc++) x_freq *= 10; return x_freq; } -#if 0 -float z80_measure_phi(uint_fast8_t cycles, uint16_t wait_ms) -{ - uint16_t ref_stop; - uint16_t ref_ovfl; - uint8_t x_ovfl; - uint8_t eimsk_save,eicrb_save; - float x_freq; +static const FLASH char * const FLASH cpu_strings[] = { + FSTR("Unknown"), + FSTR("8080"), + FSTR("8085"), + FSTR("Z80"), + FSTR("x180"), + FSTR("HD64180"), + FSTR("Z80180"), + FSTR("Z80S180"), +}; +#define O_SILENT (1<<0) +#define O_WENV (1<<1) +#define O_LOAD_LOOP (1<<2) +#define O_UNLOAD_LOOP (1<<3) - ATOMIC_BLOCK(ATOMIC_FORCEON) { - /* Save state and disable INT6 */ - eimsk_save = EIMSK; - EIMSK &= ~_BV(INT6); - /* Save state and set INT6 for falling edge */ - eicrb_save = EICRB; - EICRB = (eicrb_save & ~(0b11 << ISC60)) | (0b10 << ISC60); - } +static const FLASH char * const FLASH opt_strings[] = { + FSTR("swnu"), /* Options for chkcpu */ + FSTR("swnuc:"), /* Oprions for cpufreq */ +}; - PRR1 &= ~_BV(PRTIM3); - TCCR3A = 0; - TCCR3B = 0b000<<CS30; /* stop counter */ - TCNT3 = 0; - x_ovfl = 0; - TIFR3 = _BV(TOV3); - ref_ovfl = 0; +static const FLASH char * const FLASH env_names[] = { + FSTR(ENV_CPU), /* Env var for chkcpu result */ + FSTR(ENV_CPU_FREQ), /* Env var for cpufreq result */ +}; - ATOMIC_BLOCK(ATOMIC_FORCEON) { - /* Reset pending int */ - EIFR = _BV(INTF6); - /* Wait for falling edge */ - while ((EIFR & _BV(INTF6)) == 0) - ; - TCCR3B = 0b110<<CS30; /* Count falling edges on T3 (==INT6) */ - OCR4B = TCNT4; - TIFR4 = _BV(OCF4B); /* clear compare match flag */ - } - while (ref_ovfl < 60) { - ATOMIC_BLOCK(ATOMIC_FORCEON) { - if ((TIFR4 & _BV(OCF4B)) != 0) { - TIFR4 = _BV(OCF4B); - ref_ovfl++; - } - if ((TIFR3 & _BV(TOV3)) != 0) { - TIFR3 = _BV(TOV3); - x_ovfl++; - } - } - } +command_ret_t do_cpu_freq_chk(cmd_tbl_t *cmdtp UNUSED, uint_fast8_t flag UNUSED, int argc, char * const argv[]) +{ + uint_fast8_t options = O_LOAD_LOOP | O_UNLOAD_LOOP; + uint_fast8_t cputype = 0; + uint32_t cpu_freq = 0; + uint_fast8_t lcycles = 0; + uint_fast8_t freq_cmd = 0; +// uint16_t timeout = 1000; + uint8_t eimsk_save; + ERRNUM err = ESUCCESS; - ATOMIC_BLOCK(ATOMIC_FORCEON) { - EIFR = _BV(INTF6); - for (;;) { - if (EIFR & _BV(INTF6)) { - TCCR3B = 0b000<<CS30; /* stop counter */ - ref_stop = TCNT4; - break; - } - if ((TIFR4 & _BV(OCF4B)) != 0) { - TIFR4 = _BV(OCF4B); - ref_ovfl++; - } + if (argv[0][0] == 'f') + freq_cmd = 1; + + int opt; + while ((opt = getopt(argc, argv, opt_strings[freq_cmd])) != -1) { + switch (opt) { + case 's': + options |= O_SILENT; + break; + case 'w': + options |= O_WENV; + break; + case 'n': + options &= ~O_LOAD_LOOP; + break; + case 'u': + options &= ~O_UNLOAD_LOOP; + break; + case 'c': + lcycles = eval_arg(optarg, NULL); + break; +// case 't': +// timeout = eval_arg(optarg, NULL); +// break; + default: /* '?' */ + return CMD_RET_USAGE; } } + if (argc - optind != 0) + return CMD_RET_USAGE; - if ((TIFR3 & _BV(TOV3)) != 0) { - TIFR3 = _BV(TOV3); - x_ovfl++; - } + if (z80_bus_state() & ZST_RUNNING) + cmd_error(CMD_RET_FAILURE, ERUNNING, NULL); - ATOMIC_BLOCK(ATOMIC_FORCEON) { - /* Restore INT6 */ - EICRB = eicrb_save; - if ((eimsk_save & _BV(INT6)) != 0) - EIMSK |= _BV(INT6); - /* Reset pending int */ - EIFR = _BV(INTF6); + uint8_t *mem_save = NULL; + if (options & O_LOAD_LOOP) { + mem_save = (uint8_t *) malloc(cpuinfo_length); + if (mem_save == NULL) + cmd_error(CMD_RET_FAILURE, ENOMEM, NULL); + z80_bus_cmd(Request); + z80_read_block(mem_save, 0, cpuinfo_length); + z80_load_mem(0, cpuinfo, &cpuinfo_sections, cpuinfo_address, + cpuinfo_length_of_sections); + z80_bus_cmd(Release); } - uint32_t ref_cnt = (ref_stop - OCR4B) + ((uint32_t)ref_ovfl << 16); - - uint32_t x_cnt = TCNT3 + ((uint32_t) x_ovfl << 16); - x_freq = x_cnt * cycles; - - x_freq = (x_freq * getenv_ulong(PSTR(ENV_FMON), 10, F_CPU)) / ref_cnt; - - debug("TCNT3: %6u, ref_cnt: %9lu\n", TCNT3, ref_cnt); -#if 0 - debug("ref_start: %6u, ref_stop: %6u, ref_ovfl: %4u, ref_cnt: %9lu\n" - " TCNT3: %6u, x_cnt: %6lu, xfreq: %f\n", - OCR4B, ref_stop, ref_ovfl, ref_cnt, - TCNT3, x_cnt, x_freq); -#endif - - - /* Stop Timer */ - TCCR3B = 0; - PRR1 |= _BV(PRTIM3); - - return x_freq; -} -#endif - -#if 0 -int32_t z80_measure_phi(uint_fast8_t cycles, uint16_t wait_ms) -{ - uint16_t ref_stop; - uint16_t ref_ovfl; - uint8_t x_ovfl; - uint32_t x_freq; - uint8_t eimsk_save,eicrb_save; - - + /* Save state and disable INT5/INT6 */ ATOMIC_BLOCK(ATOMIC_FORCEON) { - /* Save state and disable INT6 */ eimsk_save = EIMSK; EIMSK &= ~_BV(INT6); - /* Save state and set INT6 for falling edge */ - eicrb_save = EICRB; - EICRB = (eicrb_save & ~(0b11 << ISC60)) | (0b10 << ISC60); - } - - PRR1 &= ~_BV(PRTIM3); - TCCR3A = 0; - TCCR3B = 0b000<<CS30; /* stop counter */ - TCNT3 = 0; - x_ovfl = 0; - TIFR3 = _BV(TOV3); - ref_ovfl = 0; - - ATOMIC_BLOCK(ATOMIC_FORCEON) { - /* Reset pending int */ - EIFR = _BV(INTF6); - /* Wait for falling edge */ - while ((EIFR & _BV(INTF6)) == 0) - ; - OCR4B = TCNT4; - TCCR3B = 0b110<<CS30; /* Count falling edges on T3 (==INT6) */ - TIFR4 = _BV(OCF4B); /* clear compare match flag */ - } - while (ref_ovfl < 60) { - ATOMIC_BLOCK(ATOMIC_FORCEON) { - if ((TIFR4 & _BV(OCF4B)) != 0) { - TIFR4 = _BV(OCF4B); - ref_ovfl++; - } - if ((TIFR3 & _BV(TOV3)) != 0) { - TIFR3 = _BV(TOV3); - x_ovfl++; - } - } + EIMSK &= ~_BV(INT5); } + EIFR = _BV(INTF5); /* Reset pending int */ - ATOMIC_BLOCK(ATOMIC_FORCEON) { - EIFR = _BV(INTF6); - for (;;) { - if (EIFR & _BV(INTF6)) { - ref_stop = TCNT4; - TCCR3B = 0b000<<CS30; /* stop counter */ - break; - } - if ((TIFR4 & _BV(OCF4B)) != 0) { - TIFR4 = _BV(OCF4B); - if (ref_ovfl) - ref_ovfl++; - } - } - } + z80_bus_cmd(Run); -#if 0 - ATOMIC_BLOCK(ATOMIC_FORCEON) { - EIFR = _BV(INTF6); - for (;;) { - if (EIFR & _BV(INTF6)) - break; - if (TIFR4 & _BV(OCF4B)) { - if (EIFR & _BV(INTF6)) - break; - TIFR4 = _BV(OCF4B); - if (EIFR & _BV(INTF6)) - break; - ref_ovfl++; - if (EIFR & _BV(INTF6)) - break; - if (ref_ovfl == 0) - break; - } - } - ref_stop = TCNT4; - TCCR3B = 0b000<<CS30; /* stop counter */ - if ((TIFR4 & _BV(OCF4B)) != 0) { - TIFR4 = _BV(OCF4B); - if (ref_ovfl) - ref_ovfl++; + clear_ctrlc(); /* forget any previous Control C */ + /* Wait for falling edge */ + do { + /* check for ctrl-c to abort... */ + if (had_ctrlc() || ctrlc()) { + err = EINTR; + break; } - } -#endif - if ((TIFR3 & _BV(TOV3)) != 0) { - TIFR3 = _BV(TOV3); - x_ovfl++; - } + } while ((EIFR & _BV(INTF5)) == 0); - if (ref_ovfl == 0) - x_freq = 0xFFFFFFFE; - else - { - uint32_t ref_cnt = (ref_stop - OCR4B) + ((uint32_t)ref_ovfl << 16); - - x_freq = TCNT3 + ((uint32_t) x_ovfl << 16); - uint32_t x_cnt = x_freq; - x_freq *= cycles; - - x_freq = ((uint64_t) x_freq * getenv_ulong(PSTR(ENV_FMON), 10, F_CPU) + (ref_cnt / 2))/ ref_cnt; - - debug("ref_start: %6u, ref_stop: %6u, ref_ovfl: %4u, ref_cnt: %9lu\n" - " TCNT3: %6u, x_cnt: %6lu, xfreq: %9lu\n", - OCR4B, ref_stop, ref_ovfl, ref_cnt, - TCNT3, x_cnt, x_freq); - - /* round to 5 decimal digits */ - uint_fast8_t sc = 0; - while (x_freq >= 100000UL) { - x_freq = (x_freq + 5)/10; - ++sc; + if (freq_cmd) { + if (lcycles == 0) { + z80_bus_cmd(Request); + if (z80_read(3) == 0xFF) + lcycles = z80_read(5); + z80_bus_cmd(Release); } - while (sc--) - x_freq *= 10; + if (!err) + cpu_freq = z80_measure_phi(lcycles); } + z80_bus_cmd(Reset); - /* Stop Timer */ - TCCR3B = 0; - PRR1 |= _BV(PRTIM3); - + /* Restore INT5/INT6 */ ATOMIC_BLOCK(ATOMIC_FORCEON) { - /* Restore INT6 */ -#if 0 /* wtf? */ - eicrb_save = EICRB; - EICRB = (EICRB & ~(0b11 << ISC60)) | (eicrb_save & (0b11 << ISC60)); -#endif - EICRB = eicrb_save; + if ((eimsk_save & _BV(INT5)) != 0) + EIMSK |= _BV(INT5); if ((eimsk_save & _BV(INT6)) != 0) EIMSK |= _BV(INT6); /* Reset pending int */ + EIFR = _BV(INTF5); EIFR = _BV(INTF6); } + Stat &= ~S_MSG_PENDING; + Stat &= ~S_CON_PENDING; - return (int32_t) x_freq; -} -#endif - -static const FLASH char * const FLASH cpu_strings[] = { - FSTR("Unknown CPU"), - FSTR("8080"), - FSTR("8085"), - FSTR("Z80"), - FSTR("x180"), - FSTR("HD64180"), - FSTR("Z80180"), - FSTR("Z80S180"), -}; - -command_ret_t do_cpuchk(cmd_tbl_t *cmdtp UNUSED, uint_fast8_t flag UNUSED, int argc UNUSED, char * const argv[] UNUSED) -{ - uint_fast8_t cputype = 0; - ERRNUM err = ESUCCESS; - uint8_t ram_save[cpuinfo_length]; - - if (z80_bus_state() & ZST_RUNNING) { - err = ERUNNING; - } else { - z80_bus_request_or_exit(); - z80_read_block(ram_save, 0, cpuinfo_length); - z80_load_mem(0, cpuinfo, - &cpuinfo_sections, - cpuinfo_address, - cpuinfo_length_of_sections); + if (freq_cmd == 0) { + z80_bus_cmd(Request); + if (z80_read(3) == 0xFF) + cputype = z80_read(4); z80_bus_cmd(Release); + } - if (argv[1] && (argv[1][0] == 'n')) - goto donot; - - z80_bus_cmd(Run); - - clear_ctrlc(); /* forget any previous Control C */ - uint_fast8_t done = 0; - while (done != 0xFF) { - _delay_ms(8); - /* check for ctrl-c to abort... */ - if (had_ctrlc() || ctrlc()) { - err = EINTR; - break; - } - z80_bus_cmd(Request); - done = z80_read(3); - if (done == 0xFF) - cputype = z80_read(4); - z80_bus_cmd(Release); - } - z80_bus_cmd(Reset); + if ((mem_save != NULL) && options & O_UNLOAD_LOOP) { z80_bus_cmd(Request); -// z80_write_block(ram_save, 0, cpuinfo_length); + z80_write_block(mem_save, 0, cpuinfo_length); z80_bus_cmd(Release); } - -donot: + free(mem_save); if (err) cmd_error(CMD_RET_FAILURE, err, NULL); - if (cputype >= ARRAY_SIZE(cpu_strings)) - cputype = 0; - printf_P(PSTR("Detected CPU: %S\n"), cpu_strings[cputype]); + char result_str[11]; + + if (freq_cmd) { + ultoa(cpu_freq, result_str, 10); + } else { + if (cputype >= ARRAY_SIZE(cpu_strings)) + cputype = 0; + strcpy_P(result_str, cpu_strings[cputype]); + } + + if (!(options & O_SILENT)) + printf_P(PSTR("%s\n"), result_str); + + if (options & O_WENV) { + if (setenv(env_names[freq_cmd], result_str)) { + if (!(options & O_SILENT)) { + printf_P(PSTR("'setenv %S %s' failed!\n"), env_names[freq_cmd], result_str); + //cmd_error(CMD_RET_FAILURE, ENOMEM, PSTR("'setenv (%S, %s)' failed"), env_names[freq_cmd], result_str); + } + return CMD_RET_FAILURE; + } + } return CMD_RET_SUCCESS; } @@ -569,135 +414,33 @@ command_ret_t do_busack_test(cmd_tbl_t *cmdtp UNUSED, uint_fast8_t flag UNUSED, return CMD_RET_SUCCESS; } -static const FLASH uint8_t loop_code[] = { -/* 0000 */ 0x00, /* nop */ -/* 0001 */ 0xAF, /* xor a */ -/* 0005 */ 0xD3,0x32, /* out (032h),a ;DCNTL */ -/* 0002 */ 0xD3,0x36, /* out (036h),a ;RCR */ -/* */ /* */ -/* 0006 */ 0xD3,0x40, /* out (040H),a ;Ready */ -/* */ /* */ -/* */ /* ;Z80 Z180(0W) Z180(MaxW) */ -/* 0008 */ /* loop: ;-------------------------- */ -/* 0008 */ 0xDB,0x50, /* in a,(050h) ;11 10 +3*3 19 */ -/* 000A */ 0xC3,0x08,0x00 /* jp loop ;10 9 +3*3 18 */ - /* ;-------------------------- */ - /* ;21 19 37 */ -}; - -command_ret_t do_cpu_freq(cmd_tbl_t *cmdtp UNUSED, uint_fast8_t flag UNUSED, int argc, char * const argv[]) -{ - -#define O_SILENT (1<<0) -#define O_WENV (1<<1) -#define O_LOAD_LOOP (1<<2) -#define O_UNLOAD_LOOP (1<<3) - - uint_fast8_t options = O_LOAD_LOOP | O_UNLOAD_LOOP; - uint_fast8_t lcycles = 19; - uint16_t timeout = 1000; - - uint8_t mem_save[ARRAY_SIZE(loop_code)]; - - int opt; - while ((opt = getopt(argc, argv, PSTR("swnuc:t:"))) != -1) { - switch (opt) { - case 's': - options |= O_SILENT; - break; - case 'w': - options |= O_WENV; - break; - case 'n': - options &= ~O_LOAD_LOOP; - break; - case 'u': - options &= ~O_UNLOAD_LOOP; - break; - case 'c': - lcycles = eval_arg(optarg, NULL); - break; - case 't': - timeout = eval_arg(optarg, NULL); - break; - default: /* '?' */ - return CMD_RET_USAGE; - } - } - if (argc - optind != 0) - return CMD_RET_USAGE; - - if (z80_bus_state() & ZST_RUNNING) { - if (!(options & O_SILENT)) - printf_P(PSTR("Frequency measuring failed. CPU allready running!\n")); - return CMD_RET_FAILURE; - } - - - z80_bus_cmd(Request); - if (options & O_LOAD_LOOP) { - z80_read_block(mem_save, 0, ARRAY_SIZE(loop_code)); - z80_write_block_P(loop_code, 0, ARRAY_SIZE(loop_code)); - } - Stat &= ~S_IO_0X40; /* Reset pending int */ - z80_bus_cmd(Release); - z80_bus_cmd(Run); - - clear_ctrlc(); /* forget any previous Control C */ - ERRNUM err = 0; - - /* Wait for falling edge */ - do { - /* check for ctrl-c to abort... */ - if (had_ctrlc() || ctrlc()) { - err = EINTR; - break; - } - } while ((Stat & S_IO_0X40) == 0); - - uint32_t cpu_freq = 0; - if (!err) - cpu_freq = z80_measure_phi(lcycles); - - z80_bus_cmd(Reset); - if (options & O_UNLOAD_LOOP) { - z80_bus_cmd(Request); - z80_write_block(mem_save, 0, ARRAY_SIZE(loop_code)); - z80_bus_cmd(Release); - } - if (err) - cmd_error(CMD_RET_FAILURE, err, NULL); - - if (!(options & O_SILENT)) { - printf_P(PSTR("%lu %3u\n"), cpu_freq & 0x0fffffff, cpu_freq >> 28); - -// printf_P(PSTR("%f%S\n"), cpu_freq, cpu_freq < 0 ? PSTR("") : PSTR("Hz")); -// if (cpu_freq != 0) -// else -// printf_P(PSTR("No CPU clock or input frequency to low!\n")); - } -#if 0 - if (options & O_WENV) { - if (setenv_ulong(PSTR(ENV_CPU_FREQ), cpu_freq)) { - if (!(options & O_SILENT)) - printf_P(PSTR("'SETENV (%S, %lu)' failed!\n"), PSTR(ENV_CPU_FREQ), cpu_freq); - return CMD_RET_FAILURE; - } - } -#endif - return CMD_RET_SUCCESS; -} - /* - * command table for fat subcommands + * command table for subcommands */ - cmd_tbl_t cmd_tbl_cpu[] = { CMD_TBL_ITEM( - chkcpu, CONFIG_SYS_MAXARGS, CTBL_RPT, do_cpuchk, - "Check CPU", - "" + freq, CONFIG_SYS_MAXARGS, CTBL_RPT, do_cpu_freq_chk, + "Measure cpu frequency", +// "[-swnu] [-c loopcycles] [-t timeout]\n" + "[-swnu] [-c loopcycles]\n" + " -s Be silent\n" + " -w Write result to environment variable '"ENV_CPU_FREQ"'\n" + " -n Don't load code snippet. \n" + " -u Don't unload. Leave code snippet in ram.\n" + " -c Overwrite cycles per lopp for in \"l: a,(50h)/jp l\" loop." +// " -t Timeout (ms)\n" +), +CMD_TBL_ITEM( + chkcpu, CONFIG_SYS_MAXARGS, CTBL_RPT|CTBL_SUBCMDAUTO, do_cpu_freq_chk, + "Check/Identify CPU", +// "[-swnu] [-c loopcycles] [-t timeout]\n" + "[-swnu] [-c loopcycles]\n" + " -s Be silent\n" + " -w Write result to environment variable '"ENV_CPU"'\n" + " -n Don't load code snippet. \n" + " -u Don't unload. Leave code snippet in ram." +// " -t Timeout (ms)\n" ), CMD_TBL_ITEM( buscmd, CONFIG_SYS_MAXARGS, CTBL_RPT, do_bus_test, @@ -705,22 +448,15 @@ CMD_TBL_ITEM( "" ), CMD_TBL_ITEM( - test, CONFIG_SYS_MAXARGS, 1, do_cpu_test, + test, CONFIG_SYS_MAXARGS, CTBL_RPT, do_cpu_test, "Do bus request/release cycles", "[-t pulsewidth]" ), CMD_TBL_ITEM( - busack, 2, 1, do_busack_test, + busack, 2, CTBL_RPT, do_busack_test, "Get time from /Reset high to /BUSACK low", "" ), -CMD_TBL_ITEM( - freq, CONFIG_SYS_MAXARGS, 1, do_cpu_freq, - "Measure cpu frequency", - "[-qwn] [-c loopcycles] [-t timeout]\n" - " -q Be quiet\n" -// " -w Write result to environment variable '"ENV_CPU_FREQ"'" -), CMD_TBL_ITEM( help, CONFIG_SYS_MAXARGS, CTBL_RPT, do_help, @@ -732,7 +468,7 @@ CMD_TBL_ITEM( ), /* This does not use the CMD_TBL_ITEM macro as ? can't be used in symbol names */ - {FSTR("?"), CONFIG_SYS_MAXARGS, 1, do_help, + {FSTR("?"), CONFIG_SYS_MAXARGS, CTBL_RPT, do_help, NULL, #ifdef CONFIG_SYS_LONGHELP FSTR(""), |