path: root/avr/cmd_boot.c

/*
 * (C) Copyright 2014-2016 Leo C. <erbl259-lmu@yahoo.de>
 *
 * (C) Copyright 2000-2003
 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 *
 * SPDX-License-Identifier:	GPL-2.0
 */

/*
 * Misc boot support
 */
#include "common.h"
#include <ctype.h>
#include <util/atomic.h>

#include "command.h"
#include "cli_readline.h"	/* console_buffer[] */
#include "cli.h"			/* run_command() */
#include "env.h"
#include "eval_arg.h"
#include "con-utils.h"
#include "getopt-min.h"
#include "z80-if.h"
#include "z180-serv.h"	/* restart_z180_serv() */
#include "debug.h"

/* ugly hack to get Z180 loadfile into flash memory */
#define const const FLASH
#include "../z180/hdrom.h"
#include "../z180/cfboot.h"
#undef const



static void z80_load_mem(int_fast8_t verbosity,
				const FLASH unsigned char data[],
				const FLASH unsigned long *sections,
				const FLASH unsigned long address[],
				const FLASH unsigned long length_of_sections[])
{
	uint32_t sec_base = 0;

	if (verbosity > 1)
		printf_P(PSTR("Loading Z180 memory... \n"));

	for (unsigned sec = 0; sec < *sections; sec++) {
		if (verbosity > 0) {
			printf_P(PSTR("   From: 0x%.5lX to: 0x%.5lX    (%5li bytes)\n"),
					address[sec],
					address[sec]+length_of_sections[sec] - 1,
					length_of_sections[sec]);
		}

		z80_write_block_P((const FLASH unsigned char *) &data[sec_base],  /* src */
				address[sec],                  /* dest */
				length_of_sections[sec]);      /* len */
		sec_base += length_of_sections[sec];
	}
}

command_ret_t do_loadf(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
	(void) cmdtp; (void) flag; (void) argc; (void) argv;

	if (z80_bus_state() & ZST_RUNNING) {
		my_puts_P(PSTR("Can't load while CPU is running!\n"));
		return CMD_RET_FAILURE;
	}
	if (!(z80_bus_cmd(Request) & ZST_ACQUIRED)) {
		my_puts_P(PSTR("Bus timeout\n"));
		return  CMD_RET_FAILURE;
	}
	z80_load_mem(2, hdrom,
				&hdrom_sections,
				hdrom_address,
				hdrom_length_of_sections);

	z80_bus_cmd(Release);

	return CMD_RET_SUCCESS;
}


void print_vars(char *title)
{
	uint8_t buf[5];
	zstate_t state = z80_bus_state();

	if((state & ZST_ACQUIRED) == 0)
		z80_bus_cmd(Request);

	z80_read_block(buf,	9, sizeof buf);

	if((state & ZST_ACQUIRED) == 0)
		z80_bus_cmd(Release);

	printf_P(PSTR("%s: stage: %d, flag: 0x%.02x, result: %d, IDE stat/error: 0x%.02x/0x%.02x\n"),
				title, buf[0], buf[1], buf[2], buf[3], buf[4]);
}


/*
 *  bootcf [options]
 *
 *		-a	address			(100h)
 *		-s	start sector	(0)
 *		-c	sector count	(7)
 *		-i	Partition id	(52)
 *		-n  load only
 *		-t	timeout			(10000)
 * 		-v	verbose
 */

command_ret_t do_bootcf(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
	struct {
		uint8_t  jr[2];
		uint16_t loadaddr;
		uint8_t  sec_start;
		uint8_t  sec_cnt;
		uint8_t  part_id;
		uint16_t timeout;
		uint8_t  stages;
	} boot_param;

	struct {
		uint8_t  stages;
		uint8_t  done;
		uint8_t  result;
		uint8_t  ide_stat;
		uint8_t  ide_error;
	} boot_res;

	int_fast8_t verbosity = 0;
	uint8_t default_stages;
	uint32_t val;

	(void) cmdtp; (void) flag;

	/* get default values */
	memcpy_P(&boot_param, cfboot, sizeof boot_param);
	default_stages = boot_param.stages;

	/* reset getopt() */
	optind = 0;

	int opt;
	while ((opt = getopt(argc, argv, PSTR("vna:s:c:t:i:"))) != -1) {
		switch (opt) {
		case 'v':
			verbosity++;
			break;
		case 'n':
			if (boot_param.stages > 0)
				boot_param.stages--;
			break;
		case 'a':
			val = eval_arg(optarg, NULL);
			if (val < 0x100 || val > 0xFE00) {
				printf_P(PSTR("Address out of range: 0x%.4lX\n"), val);
				return CMD_RET_FAILURE;
			}
			boot_param.loadaddr = val;
			break;
		case 's':
			val = eval_arg(optarg, NULL);
			if (val > 255) {
				printf_P(PSTR("Start sector out of range: 0x%lX\n"), val);
				return CMD_RET_FAILURE;
			}
			boot_param.sec_start = val;
			break;
		case 'c':
			val = eval_arg(optarg, NULL);
			if (val > 127) {
				printf_P(PSTR("Sector count out of range: 0x%lX\n"), val);
				return CMD_RET_FAILURE;
			}
			boot_param.sec_cnt = val;
			break;
		case 't':
			val = eval_arg(optarg, NULL);
			if (val < 0x1 || val > 0xFFFF) {
				printf_P(PSTR("Timeout value out of range: 0x%lX\n"), val);
				return CMD_RET_FAILURE;
			}
			boot_param.timeout = val;
			break;
		case 'i':
			val = eval_arg(optarg, NULL);
			if (val < 0x01 || val > 0xFF) {
				printf_P(PSTR("Partition id out of range: 0x%lX\n"), val);
				return CMD_RET_FAILURE;
			}
			boot_param.part_id = val;
			break;
		default: /* '?' */
			return CMD_RET_USAGE;
		}
	}

	/* remaining arguments */
	argc -= optind;
	if (argc) {
		my_puts_P(PSTR("Argument error!\n"));
		return CMD_RET_USAGE;
	}

	if ((val = (uint32_t) boot_param.loadaddr + boot_param.sec_cnt * 512) >= 0xFF00) {
		printf_P(PSTR("Top address out of range: 0x%.4lX\n"), val);
		return CMD_RET_FAILURE;
	}



	if (z80_bus_state() & ZST_RUNNING) {
		my_puts_P(PSTR("CPU is allready running!\n"));
		return CMD_RET_FAILURE;
	}
	if (!(z80_bus_cmd(Request) & ZST_ACQUIRED)) {
		my_puts_P(PSTR("Bus timeout\n"));
		return  CMD_RET_FAILURE;
	}
	z80_load_mem(verbosity, cfboot,
				&cfboot_sections,
				cfboot_address,
				cfboot_length_of_sections);

	z80_write_block((const uint8_t *) &boot_param,
				cfboot_address[0], sizeof boot_param);
	z80_bus_cmd(Release);

	if (boot_param.stages == 0) {
		printf_P(PSTR("Bootloader loaded at: 0x%.4X\n"), (uint16_t) cfboot_address[0]);
	} else {
		printf_P(PSTR("Executing %d of %d Bootloader stages...\n"),
				boot_param.stages, default_stages);

		z80_bus_cmd(Run);
		z80_bus_cmd(Release);

		clear_ctrlc();		/* forget any previous Control C */
		for (boot_res.done = 0; boot_res.done != 0xFF;) {
			_delay_ms(8);
			/* check for ctrl-c to abort... */
			if (had_ctrlc() || ctrlc()) {
				break;
			}
			z80_bus_cmd(Request);
			z80_read_block((uint8_t *) &boot_res,
					cfboot_address[0]+sizeof boot_param - 1, sizeof boot_res);
			z80_bus_cmd(Release);
		}

		if (boot_res.done != 0xFF) {
			z80_bus_cmd(Reset);
			my_puts_P(PSTR("Abort\n"));
		} else {
			if (boot_param.stages == default_stages &&
					boot_res.stages == 0 &&
					boot_res.result == 0) {
				my_puts_P(PSTR("Booting...\n"));
			} else {
				z80_bus_cmd(Reset);
				boot_res.stages++;
				printf_P(PSTR("Bootloader stopped at stage %d, result: %d, IDE stat/error: 0x%.02x/0x%.02x\n"),
					boot_param.stages - boot_res.stages,
					boot_res.result, boot_res.ide_stat, boot_res.ide_error);
			}
		}
	}

	return CMD_RET_SUCCESS;
}

command_ret_t do_busreq_pulse(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
	uint16_t count=1;

	(void) cmdtp; (void) flag;

	if (!(z80_bus_state() & ZST_RUNNING)) {
		printf_P(PSTR("## CPU is not running!\n"));
		return CMD_RET_FAILURE;
	}

	if (argc > 1)
		count = (uint16_t) eval_arg(argv[1], NULL);

	z80_bus_cmd(Request);
	while (count--)
		z80_bus_cmd(M_Cycle);

	return CMD_RET_SUCCESS;
}


command_ret_t do_go(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
	uint32_t addr;

	(void) cmdtp; (void) flag;

	if (argc < 2)
		return CMD_RET_USAGE;
	addr = eval_arg(argv[1], NULL);
	if (addr >= (1UL<<16)) {
		printf_P(PSTR("## Startaddress 0x%05lx too high.\n"
			"   (Out of logical address space (0x00000-0x0ffff))\n"),
			addr);
		return CMD_RET_FAILURE;
	}

	if (z80_bus_state() & ZST_RUNNING) {
		printf_P(PSTR("## CPU allready running!\n"));
		return CMD_RET_FAILURE;
	}

	printf_P(PSTR("## Starting application at 0x%04lx ...\n"), addr);

	if (addr != 0) {
		uint8_t tmp[3];

		z80_bus_cmd(Request);
		z80_read_block (tmp, 0, 3);
		z80_write(0, 0xc3);
		z80_write(1, addr);
		z80_write(2, (addr >> 8));

		z80_bus_cmd(Run);
		z80_bus_cmd(M_Cycle);
		z80_bus_cmd(M_Cycle);
		z80_write_block(tmp, 0, 3);
	} else
		z80_bus_cmd(Run);

	z80_bus_cmd(Release);

	return CMD_RET_SUCCESS;
}

static
void reset_cpu(bus_cmd_t mode)
{
	restart_z180_serv();
	z80_bus_cmd(mode);
}


command_ret_t do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
	(void) cmdtp; (void) flag; (void) argc; (void) argv;

	printf_P(PSTR("CPU now in reset state.\n"));

	reset_cpu(Reset);
	return CMD_RET_SUCCESS;
}

command_ret_t do_restart(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
	(void) cmdtp; (void) flag; (void) argc; (void) argv;

	reset_cpu(Restart);

	return CMD_RET_SUCCESS;
}

static
void print_con_usage(char esc)
{	printf_P(PSTR("\n"
		"------------------------------------------------\n"
		" ?,H - This Help\n"
		" Q,X - Return to command line\n"
		" R   - Reset (Restart) CPU\n"
		" :   - Execute monitor command\n"
		" \\   - code input:\n"
		"       \\nnn   3 decimal digits character code\n"
		"       \\Xhh   2 hexadecimal digits character code\n"
		" ^%c  - (Escape char) Type again to send itself\n"
		"key>"
	), esc + 0x40);
}

command_ret_t do_console(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
	int ch;
	uint8_t pending;
//	uint8_t help_prompt = 0;
	uint8_t code = 0;
	uint8_t state = 0;
	char esc_char = (char) getenv_ulong(PSTR(ENV_ESC_CHAR), 16, CONFIG_ESC_CHAR);

	(void) cmdtp; (void) flag; (void) argc; (void) argv;

	printf_P(PSTR("Connecting to CPU. Escape character is '^%c'.\n"),
					esc_char + 0x40);

	while (1) {

		ATOMIC_BLOCK(ATOMIC_FORCEON) {
			pending = (Stat & S_CON_PENDING) != 0;
			Stat &= ~S_CON_PENDING;
		}
		if (pending) {
			uint8_t count = 100;
			while ((ch = z80_memfifo_getc(fifo_conout)) >= 0 && --count)
				putchar(ch);
		}

		if ((ch = my_getchar(0)) >= 0) {
			switch (state) {
			case 0:
				if (ch == esc_char) {
					state = 1;
					/* TODO: Timer starten */
				} else {
					z80_memfifo_putc(fifo_conin, ch);
				}
				break;
			case 2:
				printf_P(PSTR("\n"
				  "------------------------------------------------\n"));
			case 1:
				state = 0;
				switch (toupper(ch)) {

				case '?':
				case 'H':
					print_con_usage(esc_char);
					state = 2;
					break;

				case 'R':
					reset_cpu(Restart);
					break;

				case 'X':
				case 'Q':
					printf_P(PSTR("\n"));
					goto quit;
					break;

				case ':':
						putchar('\n');
						int cmdlen = cli_readline(PSTR(": "), 1);
						if (cmdlen > 0)
							run_command(console_buffer, 0);
					break;

				case '\\':
					code = 0;
					state = 3;
					break;

				default:
					if (ch == esc_char)
						z80_memfifo_putc(fifo_conin, ch);
					break;
				}
				break;
			case 3:
				if (toupper(ch) == 'X') {
					state = 6;
					break;
				}
				/* fall thru */
			case 4:
			case 5:
				if (isdigit(ch)) {
					code = code * 10 + ch - '0';
					state++;
				} else {
					if (state > 3)
						z80_memfifo_putc(fifo_conin, code);
					z80_memfifo_putc(fifo_conin, ch);
					state = 0;
				}
				if (state > 5) {
					z80_memfifo_putc(fifo_conin, code);
					state = 0;
				}
				break;
			case 6:
			case 7:
				if (isxdigit(ch)) {
					ch = toupper(ch);
					if (ch >= 'A')
						ch -= 'A' - 10;
					code = code * 16 + ch - '0';
					state++;
				}else {
					if (state > 6)
						z80_memfifo_putc(fifo_conin, code);
					z80_memfifo_putc(fifo_conin, ch);
					state = 0;
				}
				if (state > 7) {
					z80_memfifo_putc(fifo_conin, code);
					state = 0;
				}
				break;
			}
		}
	}
quit:
	return CMD_RET_SUCCESS;
}