Small changes. Convert TABs to spaces.

diff --git a/irmp b/irmp
index 54cbcce61b31454cc76ad2a75d4d5e479d896345..f850d9dc0310997bbcfa076b113ac06765a18bfc 160000 (submodule)
--- a/irmp
+++ b/irmp
@@ -1 +1 @@
-Subproject commit 54cbcce61b31454cc76ad2a75d4d5e479d896345
+Subproject commit f850d9dc0310997bbcfa076b113ac06765a18bfc

diff --git a/irsnd-main.c b/irsnd-main.c
index 338743983b316ddc549138ab4888c7ec54182655..903312cf0db3406f2988b326a6e07d3d85bd7c9c 100644 (file)
--- a/irsnd-main.c
+++ b/irsnd-main.c
@@ -85,7 +85,7 @@ static void led_off(void)
 static void debug_led_on(void)\r
 {\r
 #if DEBUG_IRMP_TIMER_INT\r
-# if USE_OPENCM3_API   /* Using API functions: */\r
+# if USE_OPENCM3_API    /* Using API functions: */\r
     gpio_clear(DEBUG_LED_PORT, DEBUG_LED_PIN);\r
 #else\r
     GPIO_BRR(GPIOA) = GPIO2;\r
@@ -96,7 +96,7 @@ static void debug_led_on(void)
 static void debug_led_off(void)\r
 {\r
 #if DEBUG_IRMP_TIMER_INT\r
-# if USE_OPENCM3_API   /* Using API functions: */\r
+# if USE_OPENCM3_API    /* Using API functions: */\r
     gpio_set(DEBUG_LED_PORT, DEBUG_LED_PIN);\r
 #else\r
     GPIO_BSRR(GPIOA) = GPIO2;\r
@@ -133,10 +133,10 @@ uint32_t timer_internal_clock_get(uint32_t timer_peripheral)
 #ifdef STM32F0\r
     timer_frequency = rcc_apb1_frequency;\r
 #else\r
-       if (timer_peripheral < PERIPH_BASE_APB2)\r
+    if (timer_peripheral < PERIPH_BASE_APB2)\r
     {\r
         timer_frequency = rcc_apb1_frequency;\r
-       } else {\r
+    } else {\r
         timer_frequency = rcc_apb2_frequency;\r
     }\r
 #endif /* STM32F0 */\r
@@ -144,7 +144,7 @@ uint32_t timer_internal_clock_get(uint32_t timer_peripheral)
     if (timer_frequency != rcc_ahb_frequency)\r
         timer_frequency *= 2;\r
 \r
-       return timer_frequency;\r
+    return timer_frequency;\r
 }\r
 \r
 /**\r
@@ -155,30 +155,31 @@ void irsnd_tick_timer_init(void)
 #if DEBUG_IRMP_TIMER_INT\r
     /* Output pin for debugging */\r
     rcc_periph_clock_enable(DEBUG_LED_PORT_RCC);\r
+    gpio_set(DEBUG_LED_PORT, DEBUG_LED_PIN);\r
     gpio_set_mode(DEBUG_LED_PORT, GPIO_MODE_OUTPUT_2_MHZ,\r
               GPIO_CNF_OUTPUT_PUSHPULL, DEBUG_LED_PIN);\r
 #endif\r
-       /* Enable timer clock. */\r
+    /* Enable timer clock. */\r
     rcc_periph_clock_enable(IRSND_TICK_TIMER_RCC);\r
     nvic_set_priority(NVIC_IRSND_TICK_TIMER_IRQ, 4*16);\r
-       nvic_enable_irq(NVIC_IRSND_TICK_TIMER_IRQ);\r
-\r
-#if USE_OPENCM3_API    /* Using API functions: */\r
-\r
-       /* Timer global mode:\r
-        * - No divider\r
-        * - Alignment edge\r
-        * - Direction up\r
-        * (These are actually default values after reset, so this call\r
-        * is strictly unnecessary, but demos the api for alternative settings)\r
-        */\r
-       timer_set_mode(IRSND_TICK_TIMER, TIM_CR1_CKD_CK_INT,\r
+    nvic_enable_irq(NVIC_IRSND_TICK_TIMER_IRQ);\r
+\r
+#if USE_OPENCM3_API     /* Using API functions: */\r
+\r
+    /* Timer global mode:\r
+     * - No divider\r
+     * - Alignment edge\r
+     * - Direction up\r
+     * (These are actually default values after reset, so this call\r
+     * is strictly unnecessary, but demos the api for alternative settings)\r
+     */\r
+    timer_set_mode(IRSND_TICK_TIMER, TIM_CR1_CKD_CK_INT,\r
                         TIM_CR1_CMS_EDGE, TIM_CR1_DIR_UP);\r
-       timer_set_period(IRSND_TICK_TIMER, timer_internal_clock_get(IRSND_TICK_TIMER) / F_INTERRUPTS - 1);\r
+    timer_set_period(IRSND_TICK_TIMER, timer_internal_clock_get(IRSND_TICK_TIMER) / F_INTERRUPTS - 1);\r
     /* Enable timer update interrupt */\r
-       timer_enable_irq(IRSND_TICK_TIMER, TIM_DIER_UIE);\r
-       /* Counter enable. */\r
-       timer_enable_counter(IRSND_TICK_TIMER);\r
+    timer_enable_irq(IRSND_TICK_TIMER, TIM_DIER_UIE);\r
+    /* Counter enable. */\r
+    timer_enable_counter(IRSND_TICK_TIMER);\r
 \r
 #else /* Manually */\r
 \r
@@ -198,7 +199,7 @@ void IRSND_TICK_TIMER_ISR(void)
     debug_led_on();\r
 \r
     /* Clear update interrupt flag. */\r
-#if USE_OPENCM3_API    /* Using API functions: */\r
+#if USE_OPENCM3_API     /* Using API functions: */\r
     timer_clear_flag(IRSND_TICK_TIMER, TIM_SR_UIF);\r
 #else\r
     IRSND_TICK_TIMER_SR = ~TIM_SR_UIF;\r
@@ -225,25 +226,21 @@ main (void)
     irsnd_init();                                   // initialize irsnd\r
     irsnd_tick_timer_init();                        // initialize timer\r
 \r
-    ts = get_timer(0);\r
-    while (get_timer(ts) < 200)\r
-        ;\r
-\r
     for (;;)\r
     {\r
         irmp_data.protocol = IRMP_NEC_PROTOCOL;     // use NEC protocol\r
-        irmp_data.address  = 0x4eb1;                // set address to 0x00FF\r
-        irmp_data.command  = 0x001e;                // set command to 0x0001\r
+        irmp_data.address  = 0x4eb1;                // Marantz  RMC-12\r
+        irmp_data.command  = 0x001e;                // SYSTEM 1 POWER\r
         irmp_data.flags    = 0;                     // don't repeat frame\r
         ts = get_timer(0);\r
 \r
         led_on();\r
         irsnd_send_data (&irmp_data, TRUE);         // send frame, wait for completion\r
-        while (irsnd_is_busy())\r
-            ;\r
+        while (irsnd_is_busy())                     // wait till frame is\r
+            ;                                       //   completely sent\r
         led_off();\r
 \r
-        while (get_timer(ts) < 2000)\r
+        while (get_timer(ts) < 1000)\r
             ;\r
     }\r
 }\r