]>
Commit | Line | Data |
---|---|---|
46dd89b7 | 1 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r |
2 | * irsndconfig.h\r | |
3 | *\r | |
08f2dd9d | 4 | * DO NOT INCLUDE THIS FILE, WILL BE INCLUDED BY IRSND.H!\r |
5 | *\r | |
2ac088b2 | 6 | * Copyright (c) 2010-2013 Frank Meyer - frank(at)fli4l.de\r |
46dd89b7 | 7 | *\r |
c1dfa01f | 8 | * $Id: irsndconfig.h,v 1.58 2014/06/23 06:56:00 fm Exp $\r |
46dd89b7 | 9 | *\r |
10 | * ATMEGA88 @ 8 MHz\r | |
11 | *\r | |
12 | * This program is free software; you can redistribute it and/or modify\r | |
13 | * it under the terms of the GNU General Public License as published by\r | |
14 | * the Free Software Foundation; either version 2 of the License, or\r | |
15 | * (at your option) any later version.\r | |
16 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r | |
17 | */\r | |
18 | \r | |
08f2dd9d | 19 | #ifndef _IRSNDCONFIG_H_\r |
20 | #define _IRSNDCONFIG_H_\r | |
21 | \r | |
22 | #if !defined(_IRSND_H_)\r | |
23 | # error please include only irsnd.h, not irsndconfig.h\r | |
24 | #endif\r | |
25 | \r | |
b5ea7869 | 26 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r |
9c86ff1a | 27 | * F_INTERRUPTS: number of interrupts per second, should be in the range from 10000 to 20000, typically 15000\r |
b5ea7869 | 28 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r |
29 | */\r | |
30 | #ifndef F_INTERRUPTS\r | |
08f2dd9d | 31 | # define F_INTERRUPTS 15000 // interrupts per second\r |
b5ea7869 | 32 | #endif\r |
33 | \r | |
46dd89b7 | 34 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r |
35 | * Change settings from 1 to 0 if you want to disable one or more encoders.\r | |
36 | * This saves program space.\r | |
37 | * 1 enable decoder\r | |
38 | * 0 disable decoder\r | |
39 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r | |
40 | */\r | |
f50e01e7 | 41 | \r |
42 | // typical protocols, disable here! Enable Remarks F_INTERRUPTS Program Space\r | |
08f2dd9d | 43 | #define IRSND_SUPPORT_SIRCS_PROTOCOL 1 // Sony SIRCS >= 10000 ~200 bytes\r |
f50e01e7 | 44 | #define IRSND_SUPPORT_NEC_PROTOCOL 1 // NEC + APPLE >= 10000 ~100 bytes\r |
45 | #define IRSND_SUPPORT_SAMSUNG_PROTOCOL 1 // Samsung + Samsung32 >= 10000 ~300 bytes\r | |
46 | #define IRSND_SUPPORT_MATSUSHITA_PROTOCOL 1 // Matsushita >= 10000 ~200 bytes\r | |
08f2dd9d | 47 | #define IRSND_SUPPORT_KASEIKYO_PROTOCOL 1 // Kaseikyo >= 10000 ~300 bytes\r |
f50e01e7 | 48 | \r |
49 | // more protocols, enable here! Enable Remarks F_INTERRUPTS Program Space\r | |
03148c47 | 50 | #define IRSND_SUPPORT_DENON_PROTOCOL 0 // DENON, Sharp >= 10000 ~200 bytes\r |
f874da09 | 51 | #define IRSND_SUPPORT_RC5_PROTOCOL 0 // RC5 >= 10000 ~150 bytes\r |
f50e01e7 | 52 | #define IRSND_SUPPORT_RC6_PROTOCOL 0 // RC6 >= 10000 ~250 bytes\r |
53 | #define IRSND_SUPPORT_RC6A_PROTOCOL 0 // RC6A >= 10000 ~250 bytes\r | |
54 | #define IRSND_SUPPORT_JVC_PROTOCOL 0 // JVC >= 10000 ~150 bytes\r | |
7644ac04 | 55 | #define IRSND_SUPPORT_NEC16_PROTOCOL 0 // NEC16 >= 10000 ~150 bytes\r |
56 | #define IRSND_SUPPORT_NEC42_PROTOCOL 0 // NEC42 >= 10000 ~150 bytes\r | |
08f2dd9d | 57 | #define IRSND_SUPPORT_IR60_PROTOCOL 0 // IR60 (SDA2008) >= 10000 ~250 bytes\r |
58 | #define IRSND_SUPPORT_GRUNDIG_PROTOCOL 0 // Grundig >= 10000 ~300 bytes\r | |
f50e01e7 | 59 | #define IRSND_SUPPORT_SIEMENS_PROTOCOL 0 // Siemens, Gigaset >= 15000 ~150 bytes\r |
03148c47 | 60 | #define IRSND_SUPPORT_NOKIA_PROTOCOL 0 // Nokia >= 10000 ~400 bytes\r |
f50e01e7 | 61 | \r |
62 | // exotic protocols, enable here! Enable Remarks F_INTERRUPTS Program Space\r | |
63 | #define IRSND_SUPPORT_KATHREIN_PROTOCOL 0 // Kathrein >= 10000 DON'T CHANGE, NOT SUPPORTED YET!\r | |
64 | #define IRSND_SUPPORT_NUBERT_PROTOCOL 0 // NUBERT >= 10000 ~100 bytes\r | |
15dd9c32 | 65 | #define IRSND_SUPPORT_SPEAKER_PROTOCOL 0 // SPEAKER >= 10000 ~100 bytes\r |
f50e01e7 | 66 | #define IRSND_SUPPORT_BANG_OLUFSEN_PROTOCOL 0 // Bang&Olufsen >= 10000 ~250 bytes\r |
e664a9f3 | 67 | #define IRSND_SUPPORT_RECS80_PROTOCOL 0 // RECS80 >= 15000 ~100 bytes\r |
68 | #define IRSND_SUPPORT_RECS80EXT_PROTOCOL 0 // RECS80EXT >= 15000 ~100 bytes\r | |
7644ac04 | 69 | #define IRSND_SUPPORT_THOMSON_PROTOCOL 0 // Thomson >= 10000 ~250 bytes\r |
f50e01e7 | 70 | #define IRSND_SUPPORT_NIKON_PROTOCOL 0 // NIKON >= 10000 ~150 bytes\r |
71 | #define IRSND_SUPPORT_NETBOX_PROTOCOL 0 // Netbox keyboard >= 10000 DON'T CHANGE, NOT SUPPORTED YET!\r | |
9c07687e | 72 | #define IRSND_SUPPORT_ORTEK_PROTOCOL 0 // ORTEK (Hama) >= 10000 DON'T CHANGE, NOT SUPPORTED YET!\r |
73 | #define IRSND_SUPPORT_TELEFUNKEN_PROTOCOL 0 // Telefunken 1560 >= 10000 ~150 bytes\r | |
f50e01e7 | 74 | #define IRSND_SUPPORT_FDC_PROTOCOL 0 // FDC IR keyboard >= 10000 (better 15000) ~150 bytes\r |
75 | #define IRSND_SUPPORT_RCCAR_PROTOCOL 0 // RC CAR >= 10000 (better 15000) ~150 bytes\r | |
c9b6916a | 76 | #define IRSND_SUPPORT_ROOMBA_PROTOCOL 0 // iRobot Roomba >= 10000 ~150 bytes\r |
03148c47 | 77 | #define IRSND_SUPPORT_RUWIDO_PROTOCOL 0 // RUWIDO, T-Home >= 15000 ~250 bytes\r |
fa09ce10 | 78 | #define IRSND_SUPPORT_A1TVBOX_PROTOCOL 0 // A1 TV BOX >= 15000 (better 20000) ~200 bytes\r |
f50e01e7 | 79 | #define IRSND_SUPPORT_LEGO_PROTOCOL 0 // LEGO Power RC >= 20000 ~150 bytes\r |
c1dfa01f | 80 | #define IRSND_SUPPORT_RCMM_PROTOCOL 0 // RCMM 12,24, or 32 >= 20000 DON'T CHANGE, NOT SUPPORTED YET!\r |
81 | #define IRSND_SUPPORT_LGAIR_PROTOCOL 0 // LG Air Condition >= 10000 ~150 bytes.\r | |
770a1a9d | 82 | \r |
1f54e86c | 83 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r |
08f2dd9d | 84 | * AVR section:\r |
9c86ff1a | 85 | *\r |
1f54e86c | 86 | * Change hardware pin here: IRSND_OC2 = OC2 on ATmegas supporting OC2, e.g. ATmega8\r |
87 | * IRSND_OC2A = OC2A on ATmegas supporting OC2A, e.g. ATmega88\r | |
88 | * IRSND_OC2B = OC2B on ATmegas supporting OC2B, e.g. ATmega88\r | |
89 | * IRSND_OC0 = OC0 on ATmegas supporting OC0, e.g. ATmega162\r | |
21a4e0ee | 90 | * IRSND_OC0A = OC0A on ATmegas/ATtinys supporting OC0A, e.g. ATtiny84, ATtiny85, ATtiny87/167\r |
7644ac04 | 91 | * IRSND_OC0B = OC0B on ATmegas/ATtinys supporting OC0B, e.g. ATtiny84, ATtiny85\r |
1f54e86c | 92 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r |
93 | */\r | |
08f2dd9d | 94 | #if defined(ATMEL_AVR)\r |
95 | # define IRSND_OCx IRSND_OC2B // use OC2B\r | |
f2906202 | 96 | \r |
9c86ff1a | 97 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r |
08f2dd9d | 98 | * PIC C18 section:\r |
9c86ff1a | 99 | *\r |
100 | * Change hardware pin here: IRSND_PIC_CCP1 = RC2 on PIC 18F2550/18F4550, ...\r | |
08f2dd9d | 101 | * IRSND_PIC_CCP2 = RC1 on PIC 18F2550/18F4550, ...\r |
9c86ff1a | 102 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r |
103 | */\r | |
08f2dd9d | 104 | #elif defined(PIC_C18)\r |
105 | # define IRSND_OCx IRSND_PIC_CCP2 // Use PWMx for PIC\r | |
15dd9c32 | 106 | // change other PIC C18 specific settings:\r |
08f2dd9d | 107 | # define F_CPU 48000000UL // PIC frequency: set your freq here\r |
108 | # define Pre_Scaler 4 // define prescaler for timer2 e.g. 1,4,16\r | |
109 | # define PIC_Scaler 2 // PIC needs /2 extra in IRSND_FREQ_32_KHZ calculation for right value\r | |
110 | # warning Timer2 used for IRSND (PWM out) ! Do not use/setup Timer 2 yourself !\r | |
9c86ff1a | 111 | \r |
112 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r | |
08f2dd9d | 113 | * ARM STM32 section:\r |
9c86ff1a | 114 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r |
115 | */\r | |
37b29f94 | 116 | #elif defined (ARM_STM32) // use A6 as IR output on STM32\r |
08f2dd9d | 117 | # define IRSND_PORT_LETTER A\r |
118 | # define IRSND_BIT_NUMBER 6\r | |
119 | # define IRSND_TIMER_NUMBER 10\r | |
acd29fb9 | 120 | # define IRSND_TIMER_CHANNEL_NUMBER 1 // only channel 1 can be used at the moment, others won't work\r |
9c86ff1a | 121 | \r |
f50e01e7 | 122 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r |
08f2dd9d | 123 | * Other target system\r |
f50e01e7 | 124 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r |
125 | */\r | |
08f2dd9d | 126 | #elif !defined (UNIX_OR_WINDOWS)\r |
127 | # error target system not defined.\r | |
128 | #endif\r | |
f2906202 | 129 | \r |
f50e01e7 | 130 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r |
08f2dd9d | 131 | * Use Callbacks to indicate output signal or something else\r |
f50e01e7 | 132 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r |
133 | */\r | |
08f2dd9d | 134 | #ifndef IRSND_USE_CALLBACK\r |
135 | # define IRSND_USE_CALLBACK 0 // flag: 0 = don't use callbacks, 1 = use callbacks, default is 0\r | |
f50e01e7 | 136 | #endif\r |
137 | \r | |
08f2dd9d | 138 | #endif // _IRSNDCONFIG_H_\r |