[irmp.git] / irmpconfig.h

/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
 * irmpconfig.h\r
 *\r
 * DO NOT INCLUDE THIS FILE, WILL BE INCLUDED BY IRMP.H!\r
 *\r
 * Copyright (c) 2009-2013 Frank Meyer - frank(at)fli4l.de\r
 *\r
 * $Id: irmpconfig.h,v 1.114 2014/07/09 15:26:02 fm Exp $\r
 *\r
 * ATMEGA88 @ 8 MHz\r
 *\r
 * This program is free software; you can redistribute it and/or modify\r
 * it under the terms of the GNU General Public License as published by\r
 * the Free Software Foundation; either version 2 of the License, or\r
 * (at your option) any later version.\r
 *---------------------------------------------------------------------------------------------------------------------------------------------------\r
 */\r
\r
#ifndef _IRMPCONFIG_H_\r
#define _IRMPCONFIG_H_\r
\r
#ifndef _IRMP_H_\r
#  error please include only irmp.h, not irmpconfig.h\r
#endif\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
 * Change F_INTERRUPTS if you change the number of interrupts per second,\r
 * Normally, F_INTERRUPTS should be in the range from 10000 to 15000, typical is 15000\r
 * A value above 15000 costs additional program space, absolute maximum value is 20000.\r
 * On PIC with XC8/C18 Compiler, use 15151 as the correct value.\r
 *---------------------------------------------------------------------------------------------------------------------------------------------------\r
 */\r
#ifndef F_INTERRUPTS\r
#  define F_INTERRUPTS                          15000   // interrupts per second, min: 10000, max: 20000, typ: 15000\r
#endif\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
 * Change settings from 1 to 0 if you want to disable one or more decoders.\r
 * This saves program space.\r
 *\r
 * 1 enable  decoder\r
 * 0 disable decoder\r
 *\r
 * The standard decoders are enabled per default.\r
 * Less common protocols are disabled here, you need to enable them manually.\r
 *\r
 * If you want to use FDC or RCCAR simultaneous with RC5 protocol, additional program space is required.\r
 * If you don't need RC5 when using FDC/RCCAR, you should disable RC5.\r
 * You cannot enable both DENON and RUWIDO, only enable one of them.\r
 *---------------------------------------------------------------------------------------------------------------------------------------------------\r
 */\r
\r
// typical protocols, disable here!             Enable  Remarks                 F_INTERRUPTS            Program Space\r
#define IRMP_SUPPORT_SIRCS_PROTOCOL             1       // Sony SIRCS           >= 10000                 ~150 bytes\r
#define IRMP_SUPPORT_NEC_PROTOCOL               1       // NEC + APPLE          >= 10000                 ~300 bytes\r
#define IRMP_SUPPORT_SAMSUNG_PROTOCOL           1       // Samsung + Samsg32    >= 10000                 ~300 bytes\r
#define IRMP_SUPPORT_KASEIKYO_PROTOCOL          1       // Kaseikyo             >= 10000                 ~250 bytes\r
\r
// more protocols, enable here!                 Enable  Remarks                 F_INTERRUPTS            Program Space\r
#define IRMP_SUPPORT_JVC_PROTOCOL               0       // JVC                  >= 10000                 ~150 bytes\r
#define IRMP_SUPPORT_NEC16_PROTOCOL             0       // NEC16                >= 10000                 ~100 bytes\r
#define IRMP_SUPPORT_NEC42_PROTOCOL             0       // NEC42                >= 10000                 ~300 bytes\r
#define IRMP_SUPPORT_MATSUSHITA_PROTOCOL        0       // Matsushita           >= 10000                  ~50 bytes\r
#define IRMP_SUPPORT_DENON_PROTOCOL             0       // DENON, Sharp         >= 10000                 ~250 bytes\r
#define IRMP_SUPPORT_RC5_PROTOCOL               0       // RC5                  >= 10000                 ~250 bytes\r
#define IRMP_SUPPORT_RC6_PROTOCOL               0       // RC6 & RC6A           >= 10000                 ~250 bytes\r
#define IRMP_SUPPORT_IR60_PROTOCOL              0       // IR60 (SDA2008)       >= 10000                 ~300 bytes\r
#define IRMP_SUPPORT_GRUNDIG_PROTOCOL           0       // Grundig              >= 10000                 ~300 bytes\r
#define IRMP_SUPPORT_SIEMENS_PROTOCOL           0       // Siemens Gigaset      >= 15000                 ~550 bytes\r
#define IRMP_SUPPORT_NOKIA_PROTOCOL             0       // Nokia                >= 10000                 ~300 bytes\r
\r
// exotic protocols, enable here!               Enable  Remarks                 F_INTERRUPTS            Program Space\r
#define IRMP_SUPPORT_BOSE_PROTOCOL              0       // BOSE                 >= 10000                 ~150 bytes\r
#define IRMP_SUPPORT_KATHREIN_PROTOCOL          0       // Kathrein             >= 10000                 ~200 bytes\r
#define IRMP_SUPPORT_NUBERT_PROTOCOL            0       // NUBERT               >= 10000                  ~50 bytes\r
#define IRMP_SUPPORT_SPEAKER_PROTOCOL           0       // SPEAKER (~NUBERT)    >= 10000                  ~50 bytes\r
#define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL      0       // Bang & Olufsen       >= 10000                 ~200 bytes\r
#define IRMP_SUPPORT_RECS80_PROTOCOL            0       // RECS80 (SAA3004)     >= 15000                  ~50 bytes\r
#define IRMP_SUPPORT_RECS80EXT_PROTOCOL         0       // RECS80EXT (SAA3008)  >= 15000                  ~50 bytes\r
#define IRMP_SUPPORT_THOMSON_PROTOCOL           0       // Thomson              >= 10000                 ~250 bytes\r
#define IRMP_SUPPORT_NIKON_PROTOCOL             0       // NIKON camera         >= 10000                 ~250 bytes\r
#define IRMP_SUPPORT_NETBOX_PROTOCOL            0       // Netbox keyboard      >= 10000                 ~400 bytes (PROTOTYPE!)\r
#define IRMP_SUPPORT_ORTEK_PROTOCOL             0       // ORTEK (Hama)         >= 10000                 ~150 bytes\r
#define IRMP_SUPPORT_TELEFUNKEN_PROTOCOL        0       // Telefunken 1560      >= 10000                 ~150 bytes\r
#define IRMP_SUPPORT_FDC_PROTOCOL               0       // FDC3402 keyboard     >= 10000 (better 15000)  ~150 bytes (~400 in combination with RC5)\r
#define IRMP_SUPPORT_RCCAR_PROTOCOL             0       // RC Car               >= 10000 (better 15000)  ~150 bytes (~500 in combination with RC5)\r
#define IRMP_SUPPORT_ROOMBA_PROTOCOL            0       // iRobot Roomba        >= 10000                 ~150 bytes\r
#define IRMP_SUPPORT_RUWIDO_PROTOCOL            0       // RUWIDO, T-Home       >= 15000                 ~550 bytes\r
#define IRMP_SUPPORT_A1TVBOX_PROTOCOL           0       // A1 TV BOX            >= 15000 (better 20000)  ~300 bytes\r
#define IRMP_SUPPORT_LEGO_PROTOCOL              0       // LEGO Power RC        >= 20000                 ~150 bytes\r
#define IRMP_SUPPORT_RCMM_PROTOCOL              0       // RCMM 12,24, or 32    >= 20000                 ~150 bytes\r
#define IRMP_SUPPORT_LGAIR_PROTOCOL             0       // LG Air Condition     >= 10000                 ~300 bytes\r
#define IRMP_SUPPORT_SAMSUNG48_PROTOCOL         0       // Samsung48            >= 10000                 ~100 bytes (SAMSUNG must be enabled!)\r
#define IRMP_SUPPORT_RADIO1_PROTOCOL            0       // RADIO, e.g. TEVION   >= 10000                 ~250 bytes (experimental)\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
 * Change hardware pin here for ATMEL AVR\r
 *---------------------------------------------------------------------------------------------------------------------------------------------------\r
 */\r
#if defined (ATMEL_AVR)                                                 // use PB6 as IR input on AVR\r
#  define IRMP_PORT_LETTER                      B\r
#  define IRMP_BIT_NUMBER                       6\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
 * Change hardware pin here for PIC C18 or XC8 compiler\r
 *---------------------------------------------------------------------------------------------------------------------------------------------------\r
 */\r
#elif defined (PIC_C18)                                                 // use RB4 as IR input on PIC (C18 or XC8 compiler)\r
#  define IRMP_PIN                              PORTBbits.RB4\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
 * Change hardware pin here for PIC CCS compiler\r
 *---------------------------------------------------------------------------------------------------------------------------------------------------\r
 */\r
#elif defined (PIC_CCS)\r
#  define IRMP_PIN                              PIN_B4                  // use PB4 as IR input on PIC (CCS compiler)\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
 * Change hardware pin here for ARM STM32\r
 *---------------------------------------------------------------------------------------------------------------------------------------------------\r
 */\r
#elif defined (ARM_STM32)                                               // use C13 as IR input on STM32\r
#  define IRMP_PORT_LETTER                      C\r
#  define IRMP_BIT_NUMBER                       13\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
 * Change hardware pin here for Stellaris ARM Cortex M4\r
 *---------------------------------------------------------------------------------------------------------------------------------------------------\r
 */\r
#elif defined (STELLARIS_ARM_CORTEX_M4)                                 // use B4 as IR input on Stellaris LM4F\r
#  define IRMP_PORT_LETTER                      B\r
#  define IRMP_BIT_NUMBER                       4\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
 * Handling of unknown target system: DON'T CHANGE\r
 *---------------------------------------------------------------------------------------------------------------------------------------------------\r
 */\r
#elif !defined (UNIX_OR_WINDOWS)\r
#  error target system not defined.\r
#endif\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
 * Set IRMP_LOGGING to 1 if want to log data to UART with 9600Bd\r
 *---------------------------------------------------------------------------------------------------------------------------------------------------\r
 */\r
#ifndef IRMP_LOGGING\r
#  define IRMP_LOGGING                          0       // 1: log IR signal (scan), 0: do not. default is 0\r
#endif\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
 * Use external logging routines\r
 * If you enable external logging, you have also to enable IRMP_LOGGING above\r
 *---------------------------------------------------------------------------------------------------------------------------------------------------\r
 */\r
#ifndef IRMP_EXT_LOGGING\r
#  define IRMP_EXT_LOGGING                      0       // 1: use external logging, 0: do not. default is 0\r
#endif\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
 * Set IRMP_PROTOCOL_NAMES to 1 if want to access protocol names (for logging etc), costs ~300 bytes RAM!\r
 *---------------------------------------------------------------------------------------------------------------------------------------------------\r
 */\r
#ifndef IRMP_PROTOCOL_NAMES\r
#  define IRMP_PROTOCOL_NAMES                   0       // 1: access protocol names, 0: do not. default is 0\r
#endif\r
\r
/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
 * Use Callbacks to indicate input signal\r
 *---------------------------------------------------------------------------------------------------------------------------------------------------\r
 */\r
#ifndef IRMP_USE_CALLBACK\r
#  define IRMP_USE_CALLBACK                     0       // 1: use callbacks. 0: do not. default is 0\r
#endif\r
\r
#endif /* _WC_IRMPCONFIG_H_ */\r
Commit	Line	Data
cb8474cc	1	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	2	* irmpconfig.h\r
	3	*\r
08f2dd9d	4	* DO NOT INCLUDE THIS FILE, WILL BE INCLUDED BY IRMP.H!\r
cb8474cc	5	*\r
2ac088b2	6	* Copyright (c) 2009-2013 Frank Meyer - frank(at)fli4l.de\r
08f2dd9d	7	*\r
80b3a55d	8	* $Id: irmpconfig.h,v 1.114 2014/07/09 15:26:02 fm Exp $\r
cb8474cc	9	*\r
	10	* ATMEGA88 @ 8 MHz\r
	11	*\r
	12	* This program is free software; you can redistribute it and/or modify\r
	13	* it under the terms of the GNU General Public License as published by\r
	14	* the Free Software Foundation; either version 2 of the License, or\r
	15	* (at your option) any later version.\r
	16	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	17	*/\r
	18	\r
	19	#ifndef _IRMPCONFIG_H_\r
	20	#define _IRMPCONFIG_H_\r
	21	\r
08f2dd9d	22	#ifndef _IRMP_H_\r
	23	# error please include only irmp.h, not irmpconfig.h\r
	24	#endif\r
	25	\r
cb8474cc	26	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
d823e852	27	* Change F_INTERRUPTS if you change the number of interrupts per second,\r
35213800	28	* Normally, F_INTERRUPTS should be in the range from 10000 to 15000, typical is 15000\r
35213800	29	* A value above 15000 costs additional program space, absolute maximum value is 20000.\r
7a844aff	30	* On PIC with XC8/C18 Compiler, use 15151 as the correct value.\r
cb8474cc	31	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
cb8474cc	32	*/\r
b5ea7869	33	#ifndef F_INTERRUPTS\r
08f2dd9d	34	# define F_INTERRUPTS 15000 // interrupts per second, min: 10000, max: 20000, typ: 15000\r
b5ea7869	35	#endif\r
cb8474cc	36	\r
	37	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	38	* Change settings from 1 to 0 if you want to disable one or more decoders.\r
	39	* This saves program space.\r
d823e852	40	*\r
cb8474cc	41	* 1 enable decoder\r
cb8474cc	42	* 0 disable decoder\r
d823e852	43	*\r
2eab5ec9	44	* The standard decoders are enabled per default.\r
66c864ba	45	* Less common protocols are disabled here, you need to enable them manually.\r
2eab5ec9	46	*\r
d823e852	47	* If you want to use FDC or RCCAR simultaneous with RC5 protocol, additional program space is required.\r
d823e852	48	* If you don't need RC5 when using FDC/RCCAR, you should disable RC5.\r
08f2dd9d	49	* You cannot enable both DENON and RUWIDO, only enable one of them.\r
cb8474cc	50	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
cb8474cc	51	*/\r
d823e852	52	\r
66c864ba	53	// typical protocols, disable here! Enable Remarks F_INTERRUPTS Program Space\r
2cfc146d	54	#define IRMP_SUPPORT_SIRCS_PROTOCOL 1 // Sony SIRCS >= 10000 ~150 bytes\r
2cfc146d	55	#define IRMP_SUPPORT_NEC_PROTOCOL 1 // NEC + APPLE >= 10000 ~300 bytes\r
956ea3ea	56	#define IRMP_SUPPORT_SAMSUNG_PROTOCOL 1 // Samsung + Samsg32 >= 10000 ~300 bytes\r
770a1a9d	57	#define IRMP_SUPPORT_KASEIKYO_PROTOCOL 1 // Kaseikyo >= 10000 ~250 bytes\r
35213800	58	\r
66c864ba	59	// more protocols, enable here! Enable Remarks F_INTERRUPTS Program Space\r
03148c47	60	#define IRMP_SUPPORT_JVC_PROTOCOL 0 // JVC >= 10000 ~150 bytes\r
	61	#define IRMP_SUPPORT_NEC16_PROTOCOL 0 // NEC16 >= 10000 ~100 bytes\r
	62	#define IRMP_SUPPORT_NEC42_PROTOCOL 0 // NEC42 >= 10000 ~300 bytes\r
956ea3ea	63	#define IRMP_SUPPORT_MATSUSHITA_PROTOCOL 0 // Matsushita >= 10000 ~50 bytes\r
	64	#define IRMP_SUPPORT_DENON_PROTOCOL 0 // DENON, Sharp >= 10000 ~250 bytes\r
	65	#define IRMP_SUPPORT_RC5_PROTOCOL 0 // RC5 >= 10000 ~250 bytes\r
	66	#define IRMP_SUPPORT_RC6_PROTOCOL 0 // RC6 & RC6A >= 10000 ~250 bytes\r
03148c47	67	#define IRMP_SUPPORT_IR60_PROTOCOL 0 // IR60 (SDA2008) >= 10000 ~300 bytes\r
	68	#define IRMP_SUPPORT_GRUNDIG_PROTOCOL 0 // Grundig >= 10000 ~300 bytes\r
	69	#define IRMP_SUPPORT_SIEMENS_PROTOCOL 0 // Siemens Gigaset >= 15000 ~550 bytes\r
	70	#define IRMP_SUPPORT_NOKIA_PROTOCOL 0 // Nokia >= 10000 ~300 bytes\r
f50e01e7	71	\r
f50e01e7	72	// exotic protocols, enable here! Enable Remarks F_INTERRUPTS Program Space\r
03148c47	73	#define IRMP_SUPPORT_BOSE_PROTOCOL 0 // BOSE >= 10000 ~150 bytes\r
	74	#define IRMP_SUPPORT_KATHREIN_PROTOCOL 0 // Kathrein >= 10000 ~200 bytes\r
	75	#define IRMP_SUPPORT_NUBERT_PROTOCOL 0 // NUBERT >= 10000 ~50 bytes\r
	76	#define IRMP_SUPPORT_SPEAKER_PROTOCOL 0 // SPEAKER (~NUBERT) >= 10000 ~50 bytes\r
	77	#define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL 0 // Bang & Olufsen >= 10000 ~200 bytes\r
	78	#define IRMP_SUPPORT_RECS80_PROTOCOL 0 // RECS80 (SAA3004) >= 15000 ~50 bytes\r
	79	#define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0 // RECS80EXT (SAA3008) >= 15000 ~50 bytes\r
	80	#define IRMP_SUPPORT_THOMSON_PROTOCOL 0 // Thomson >= 10000 ~250 bytes\r
	81	#define IRMP_SUPPORT_NIKON_PROTOCOL 0 // NIKON camera >= 10000 ~250 bytes\r
	82	#define IRMP_SUPPORT_NETBOX_PROTOCOL 0 // Netbox keyboard >= 10000 ~400 bytes (PROTOTYPE!)\r
	83	#define IRMP_SUPPORT_ORTEK_PROTOCOL 0 // ORTEK (Hama) >= 10000 ~150 bytes\r
b85cb27d	84	#define IRMP_SUPPORT_TELEFUNKEN_PROTOCOL 0 // Telefunken 1560 >= 10000 ~150 bytes\r
03148c47	85	#define IRMP_SUPPORT_FDC_PROTOCOL 0 // FDC3402 keyboard >= 10000 (better 15000) ~150 bytes (~400 in combination with RC5)\r
	86	#define IRMP_SUPPORT_RCCAR_PROTOCOL 0 // RC Car >= 10000 (better 15000) ~150 bytes (~500 in combination with RC5)\r
	87	#define IRMP_SUPPORT_ROOMBA_PROTOCOL 0 // iRobot Roomba >= 10000 ~150 bytes\r
	88	#define IRMP_SUPPORT_RUWIDO_PROTOCOL 0 // RUWIDO, T-Home >= 15000 ~550 bytes\r
	89	#define IRMP_SUPPORT_A1TVBOX_PROTOCOL 0 // A1 TV BOX >= 15000 (better 20000) ~300 bytes\r
	90	#define IRMP_SUPPORT_LEGO_PROTOCOL 0 // LEGO Power RC >= 20000 ~150 bytes\r
	91	#define IRMP_SUPPORT_RCMM_PROTOCOL 0 // RCMM 12,24, or 32 >= 20000 ~150 bytes\r
69da6090	92	#define IRMP_SUPPORT_LGAIR_PROTOCOL 0 // LG Air Condition >= 10000 ~300 bytes\r
956ea3ea	93	#define IRMP_SUPPORT_SAMSUNG48_PROTOCOL 0 // Samsung48 >= 10000 ~100 bytes (SAMSUNG must be enabled!)\r
956ea3ea	94	#define IRMP_SUPPORT_RADIO1_PROTOCOL 0 // RADIO, e.g. TEVION >= 10000 ~250 bytes (experimental)\r
2fb27bfe	95	\r
cb8474cc	96	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
08f2dd9d	97	* Change hardware pin here for ATMEL AVR\r
cb8474cc	98	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
cb8474cc	99	*/\r
08f2dd9d	100	#if defined (ATMEL_AVR) // use PB6 as IR input on AVR\r
	101	# define IRMP_PORT_LETTER B\r
	102	# define IRMP_BIT_NUMBER 6\r
cb8474cc	103	\r
cb8474cc	104	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
4a7dc859	105	* Change hardware pin here for PIC C18 or XC8 compiler\r
cb8474cc	106	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
cb8474cc	107	*/\r
4a7dc859	108	#elif defined (PIC_C18) // use RB4 as IR input on PIC (C18 or XC8 compiler)\r
08f2dd9d	109	# define IRMP_PIN PORTBbits.RB4\r
cb8474cc	110	\r
6c3c57e6	111	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
08f2dd9d	112	* Change hardware pin here for PIC CCS compiler\r
6c3c57e6	113	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
6c3c57e6	114	*/\r
08f2dd9d	115	#elif defined (PIC_CCS)\r
4a7dc859	116	# define IRMP_PIN PIN_B4 // use PB4 as IR input on PIC (CCS compiler)\r
6c3c57e6	117	\r
1f54e86c	118	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
08f2dd9d	119	* Change hardware pin here for ARM STM32\r
1f54e86c	120	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
1f54e86c	121	*/\r
08f2dd9d	122	#elif defined (ARM_STM32) // use C13 as IR input on STM32\r
	123	# define IRMP_PORT_LETTER C\r
	124	# define IRMP_BIT_NUMBER 13\r
1f54e86c	125	\r
afd1e690	126	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	127	* Change hardware pin here for Stellaris ARM Cortex M4\r
	128	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	129	*/\r
	130	#elif defined (STELLARIS_ARM_CORTEX_M4) // use B4 as IR input on Stellaris LM4F\r
	131	# define IRMP_PORT_LETTER B\r
	132	# define IRMP_BIT_NUMBER 4\r
	133	\r
7644ac04	134	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
08f2dd9d	135	* Handling of unknown target system: DON'T CHANGE\r
7644ac04	136	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
7644ac04	137	*/\r
08f2dd9d	138	#elif !defined (UNIX_OR_WINDOWS)\r
	139	# error target system not defined.\r
	140	#endif\r
7644ac04	141	\r
1aee56bc	142	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
08f2dd9d	143	* Set IRMP_LOGGING to 1 if want to log data to UART with 9600Bd\r
1aee56bc	144	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
1aee56bc	145	*/\r
08f2dd9d	146	#ifndef IRMP_LOGGING\r
08f2dd9d	147	# define IRMP_LOGGING 0 // 1: log IR signal (scan), 0: do not. default is 0\r
770a1a9d	148	#endif\r
770a1a9d	149	\r
08f2dd9d	150	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	151	* Use external logging routines\r
	152	* If you enable external logging, you have also to enable IRMP_LOGGING above\r
	153	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	154	*/\r
	155	#ifndef IRMP_EXT_LOGGING\r
	156	# define IRMP_EXT_LOGGING 0 // 1: use external logging, 0: do not. default is 0\r
35213800	157	#endif\r
35213800	158	\r
08f2dd9d	159	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	160	* Set IRMP_PROTOCOL_NAMES to 1 if want to access protocol names (for logging etc), costs ~300 bytes RAM!\r
	161	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	162	*/\r
	163	#ifndef IRMP_PROTOCOL_NAMES\r
	164	# define IRMP_PROTOCOL_NAMES 0 // 1: access protocol names, 0: do not. default is 0\r
35213800	165	#endif\r
35213800	166	\r
08f2dd9d	167	/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	168	* Use Callbacks to indicate input signal\r
	169	*---------------------------------------------------------------------------------------------------------------------------------------------------\r
	170	*/\r
	171	#ifndef IRMP_USE_CALLBACK\r
	172	# define IRMP_USE_CALLBACK 0 // 1: use callbacks. 0: do not. default is 0\r
12948cf3	173	#endif\r
12948cf3	174	\r
cb8474cc	175	#endif /* _WC_IRMPCONFIG_H_ */\r