irmpconfig.h

   1 /*---------------------------------------------------------------------------------------------------------------------------------------------------
   2  * irmpconfig.h
   3  *
   4  * DO NOT INCLUDE THIS FILE, WILL BE INCLUDED BY IRMP.H!
   5  *
   6  * Copyright (c) 2009-2013 Frank Meyer - frank(at)fli4l.de
   7  *
   8  * $Id: irmpconfig.h,v 1.114 2014/07/09 15:26:02 fm Exp $
   9  *
  10  * ATMEGA88 @ 8 MHz
  11  *
  12  * This program is free software; you can redistribute it and/or modify
  13  * it under the terms of the GNU General Public License as published by
  14  * the Free Software Foundation; either version 2 of the License, or
  15  * (at your option) any later version.
  16  *---------------------------------------------------------------------------------------------------------------------------------------------------
  17  */
  18
  19 #ifndef _IRMPCONFIG_H_
  20 #define _IRMPCONFIG_H_
  21
  22 #ifndef _IRMP_H_
  23 #  error please include only irmp.h, not irmpconfig.h
  24 #endif
  25
  26 /*---------------------------------------------------------------------------------------------------------------------------------------------------
  27  * Change F_INTERRUPTS if you change the number of interrupts per second,
  28  * Normally, F_INTERRUPTS should be in the range from 10000 to 15000, typical is 15000
  29  * A value above 15000 costs additional program space, absolute maximum value is 20000.
  30  * On PIC with XC8/C18 Compiler, use 15151 as the correct value.
  31  *---------------------------------------------------------------------------------------------------------------------------------------------------
  32  */
  33 #ifndef F_INTERRUPTS
  34 #  define F_INTERRUPTS                          15000   // interrupts per second, min: 10000, max: 20000, typ: 15000
  35 #endif
  36
  37 /*---------------------------------------------------------------------------------------------------------------------------------------------------
  38  * Change settings from 1 to 0 if you want to disable one or more decoders.
  39  * This saves program space.
  40  *
  41  * 1 enable  decoder
  42  * 0 disable decoder
  43  *
  44  * The standard decoders are enabled per default.
  45  * Less common protocols are disabled here, you need to enable them manually.
  46  *
  47  * If you want to use FDC or RCCAR simultaneous with RC5 protocol, additional program space is required.
  48  * If you don't need RC5 when using FDC/RCCAR, you should disable RC5.
  49  * You cannot enable both DENON and RUWIDO, only enable one of them.
  50  *---------------------------------------------------------------------------------------------------------------------------------------------------
  51  */
  52
  53 // typical protocols, disable here!             Enable  Remarks                 F_INTERRUPTS            Program Space
  54 #define IRMP_SUPPORT_SIRCS_PROTOCOL             1       // Sony SIRCS           >= 10000                 ~150 bytes
  55 #define IRMP_SUPPORT_NEC_PROTOCOL               1       // NEC + APPLE          >= 10000                 ~300 bytes
  56 #define IRMP_SUPPORT_SAMSUNG_PROTOCOL           1       // Samsung + Samsg32    >= 10000                 ~300 bytes
  57 #define IRMP_SUPPORT_KASEIKYO_PROTOCOL          1       // Kaseikyo             >= 10000                 ~250 bytes
  58
  59 // more protocols, enable here!                 Enable  Remarks                 F_INTERRUPTS            Program Space
  60 #define IRMP_SUPPORT_JVC_PROTOCOL               0       // JVC                  >= 10000                 ~150 bytes
  61 #define IRMP_SUPPORT_NEC16_PROTOCOL             0       // NEC16                >= 10000                 ~100 bytes
  62 #define IRMP_SUPPORT_NEC42_PROTOCOL             0       // NEC42                >= 10000                 ~300 bytes
  63 #define IRMP_SUPPORT_MATSUSHITA_PROTOCOL        0       // Matsushita           >= 10000                  ~50 bytes
  64 #define IRMP_SUPPORT_DENON_PROTOCOL             0       // DENON, Sharp         >= 10000                 ~250 bytes
  65 #define IRMP_SUPPORT_RC5_PROTOCOL               0       // RC5                  >= 10000                 ~250 bytes
  66 #define IRMP_SUPPORT_RC6_PROTOCOL               0       // RC6 & RC6A           >= 10000                 ~250 bytes
  67 #define IRMP_SUPPORT_IR60_PROTOCOL              0       // IR60 (SDA2008)       >= 10000                 ~300 bytes
  68 #define IRMP_SUPPORT_GRUNDIG_PROTOCOL           0       // Grundig              >= 10000                 ~300 bytes
  69 #define IRMP_SUPPORT_SIEMENS_PROTOCOL           0       // Siemens Gigaset      >= 15000                 ~550 bytes
  70 #define IRMP_SUPPORT_NOKIA_PROTOCOL             0       // Nokia                >= 10000                 ~300 bytes
  71
  72 // exotic protocols, enable here!               Enable  Remarks                 F_INTERRUPTS            Program Space
  73 #define IRMP_SUPPORT_BOSE_PROTOCOL              0       // BOSE                 >= 10000                 ~150 bytes
  74 #define IRMP_SUPPORT_KATHREIN_PROTOCOL          0       // Kathrein             >= 10000                 ~200 bytes
  75 #define IRMP_SUPPORT_NUBERT_PROTOCOL            0       // NUBERT               >= 10000                  ~50 bytes
  76 #define IRMP_SUPPORT_SPEAKER_PROTOCOL           0       // SPEAKER (~NUBERT)    >= 10000                  ~50 bytes
  77 #define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL      0       // Bang & Olufsen       >= 10000                 ~200 bytes
  78 #define IRMP_SUPPORT_RECS80_PROTOCOL            0       // RECS80 (SAA3004)     >= 15000                  ~50 bytes
  79 #define IRMP_SUPPORT_RECS80EXT_PROTOCOL         0       // RECS80EXT (SAA3008)  >= 15000                  ~50 bytes
  80 #define IRMP_SUPPORT_THOMSON_PROTOCOL           0       // Thomson              >= 10000                 ~250 bytes
  81 #define IRMP_SUPPORT_NIKON_PROTOCOL             0       // NIKON camera         >= 10000                 ~250 bytes
  82 #define IRMP_SUPPORT_NETBOX_PROTOCOL            0       // Netbox keyboard      >= 10000                 ~400 bytes (PROTOTYPE!)
  83 #define IRMP_SUPPORT_ORTEK_PROTOCOL             0       // ORTEK (Hama)         >= 10000                 ~150 bytes
  84 #define IRMP_SUPPORT_TELEFUNKEN_PROTOCOL        0       // Telefunken 1560      >= 10000                 ~150 bytes
  85 #define IRMP_SUPPORT_FDC_PROTOCOL               0       // FDC3402 keyboard     >= 10000 (better 15000)  ~150 bytes (~400 in combination with RC5)
  86 #define IRMP_SUPPORT_RCCAR_PROTOCOL             0       // RC Car               >= 10000 (better 15000)  ~150 bytes (~500 in combination with RC5)
  87 #define IRMP_SUPPORT_ROOMBA_PROTOCOL            0       // iRobot Roomba        >= 10000                 ~150 bytes
  88 #define IRMP_SUPPORT_RUWIDO_PROTOCOL            0       // RUWIDO, T-Home       >= 15000                 ~550 bytes
  89 #define IRMP_SUPPORT_A1TVBOX_PROTOCOL           0       // A1 TV BOX            >= 15000 (better 20000)  ~300 bytes
  90 #define IRMP_SUPPORT_LEGO_PROTOCOL              0       // LEGO Power RC        >= 20000                 ~150 bytes
  91 #define IRMP_SUPPORT_RCMM_PROTOCOL              0       // RCMM 12,24, or 32    >= 20000                 ~150 bytes
  92 #define IRMP_SUPPORT_LGAIR_PROTOCOL             0       // LG Air Condition     >= 10000                 ~300 bytes
  93 #define IRMP_SUPPORT_SAMSUNG48_PROTOCOL         0       // Samsung48            >= 10000                 ~100 bytes (SAMSUNG must be enabled!)
  94 #define IRMP_SUPPORT_RADIO1_PROTOCOL            0       // RADIO, e.g. TEVION   >= 10000                 ~250 bytes (experimental)
  95
  96 /*---------------------------------------------------------------------------------------------------------------------------------------------------
  97  * Change hardware pin here for ATMEL AVR
  98  *---------------------------------------------------------------------------------------------------------------------------------------------------
  99  */
 100 #if defined (ATMEL_AVR)                                                 // use PB6 as IR input on AVR
 101 #  define IRMP_PORT_LETTER                      B
 102 #  define IRMP_BIT_NUMBER                       6
 103
 104 /*---------------------------------------------------------------------------------------------------------------------------------------------------
 105  * Change hardware pin here for PIC C18 or XC8 compiler
 106  *---------------------------------------------------------------------------------------------------------------------------------------------------
 107  */
 108 #elif defined (PIC_C18)                                                 // use RB4 as IR input on PIC (C18 or XC8 compiler)
 109 #  define IRMP_PIN                              PORTBbits.RB4
 110
 111 /*---------------------------------------------------------------------------------------------------------------------------------------------------
 112  * Change hardware pin here for PIC CCS compiler
 113  *---------------------------------------------------------------------------------------------------------------------------------------------------
 114  */
 115 #elif defined (PIC_CCS)
 116 #  define IRMP_PIN                              PIN_B4                  // use PB4 as IR input on PIC (CCS compiler)
 117
 118 /*---------------------------------------------------------------------------------------------------------------------------------------------------
 119  * Change hardware pin here for ARM STM32
 120  *---------------------------------------------------------------------------------------------------------------------------------------------------
 121  */
 122 #elif defined (ARM_STM32)                                               // use C13 as IR input on STM32
 123 #  define IRMP_PORT_LETTER                      C
 124 #  define IRMP_BIT_NUMBER                       13
 125
 126 /*---------------------------------------------------------------------------------------------------------------------------------------------------
 127  * Change hardware pin here for Stellaris ARM Cortex M4
 128  *---------------------------------------------------------------------------------------------------------------------------------------------------
 129  */
 130 #elif defined (STELLARIS_ARM_CORTEX_M4)                                 // use B4 as IR input on Stellaris LM4F
 131 #  define IRMP_PORT_LETTER                      B
 132 #  define IRMP_BIT_NUMBER                       4
 133
 134 /*---------------------------------------------------------------------------------------------------------------------------------------------------
 135  * Handling of unknown target system: DON'T CHANGE
 136  *---------------------------------------------------------------------------------------------------------------------------------------------------
 137  */
 138 #elif !defined (UNIX_OR_WINDOWS)
 139 #  error target system not defined.
 140 #endif
 141
 142 /*---------------------------------------------------------------------------------------------------------------------------------------------------
 143  * Set IRMP_LOGGING to 1 if want to log data to UART with 9600Bd
 144  *---------------------------------------------------------------------------------------------------------------------------------------------------
 145  */
 146 #ifndef IRMP_LOGGING
 147 #  define IRMP_LOGGING                          0       // 1: log IR signal (scan), 0: do not. default is 0
 148 #endif
 149
 150 /*---------------------------------------------------------------------------------------------------------------------------------------------------
 151  * Use external logging routines
 152  * If you enable external logging, you have also to enable IRMP_LOGGING above
 153  *---------------------------------------------------------------------------------------------------------------------------------------------------
 154  */
 155 #ifndef IRMP_EXT_LOGGING
 156 #  define IRMP_EXT_LOGGING                      0       // 1: use external logging, 0: do not. default is 0
 157 #endif
 158
 159 /*---------------------------------------------------------------------------------------------------------------------------------------------------
 160  * Set IRMP_PROTOCOL_NAMES to 1 if want to access protocol names (for logging etc), costs ~300 bytes RAM!
 161  *---------------------------------------------------------------------------------------------------------------------------------------------------
 162  */
 163 #ifndef IRMP_PROTOCOL_NAMES
 164 #  define IRMP_PROTOCOL_NAMES                   0       // 1: access protocol names, 0: do not. default is 0
 165 #endif
 166
 167 /*---------------------------------------------------------------------------------------------------------------------------------------------------
 168  * Use Callbacks to indicate input signal
 169  *---------------------------------------------------------------------------------------------------------------------------------------------------
 170  */
 171 #ifndef IRMP_USE_CALLBACK
 172 #  define IRMP_USE_CALLBACK                     0       // 1: use callbacks. 0: do not. default is 0
 173 #endif
 174
 175 #endif /* _WC_IRMPCONFIG_H_ */