| cb8474cc |
1 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r |
| 2 | * irmpconfig.h\r |
| 3 | *\r |
| f50e01e7 |
4 | * Copyright (c) 2009-2011 Frank Meyer - frank(at)fli4l.de\r |
| cb8474cc |
5 | *\r |
| 6c3c57e6 |
6 | * $Id: irmpconfig.h,v 1.78 2012/02/16 10:40:08 fm Exp $\r |
| cb8474cc |
7 | *\r |
| 8 | * ATMEGA88 @ 8 MHz\r |
| 9 | *\r |
| 10 | * This program is free software; you can redistribute it and/or modify\r |
| 11 | * it under the terms of the GNU General Public License as published by\r |
| 12 | * the Free Software Foundation; either version 2 of the License, or\r |
| 13 | * (at your option) any later version.\r |
| 14 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r |
| 15 | */\r |
| 16 | \r |
| 17 | #ifndef _IRMPCONFIG_H_\r |
| 18 | #define _IRMPCONFIG_H_\r |
| 19 | \r |
| 20 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r |
| d823e852 |
21 | * Change F_INTERRUPTS if you change the number of interrupts per second,\r |
| 35213800 |
22 | * Normally, F_INTERRUPTS should be in the range from 10000 to 15000, typical is 15000\r |
| 23 | * A value above 15000 costs additional program space, absolute maximum value is 20000.\r |
| cb8474cc |
24 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r |
| 25 | */\r |
| b5ea7869 |
26 | #ifndef F_INTERRUPTS\r |
| 9c86ff1a |
27 | #define F_INTERRUPTS 15000 // interrupts per second, min: 10000, max: 20000, typ: 15000\r |
| b5ea7869 |
28 | #endif\r |
| cb8474cc |
29 | \r |
| 30 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r |
| 31 | * Change settings from 1 to 0 if you want to disable one or more decoders.\r |
| 32 | * This saves program space.\r |
| d823e852 |
33 | *\r |
| cb8474cc |
34 | * 1 enable decoder\r |
| 35 | * 0 disable decoder\r |
| d823e852 |
36 | *\r |
| 2eab5ec9 |
37 | * The standard decoders are enabled per default.\r |
| 66c864ba |
38 | * Less common protocols are disabled here, you need to enable them manually.\r |
| 2eab5ec9 |
39 | *\r |
| d823e852 |
40 | * If you want to use FDC or RCCAR simultaneous with RC5 protocol, additional program space is required.\r |
| 41 | * If you don't need RC5 when using FDC/RCCAR, you should disable RC5.\r |
| cb8474cc |
42 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r |
| 43 | */\r |
| d823e852 |
44 | \r |
| 66c864ba |
45 | // typical protocols, disable here! Enable Remarks F_INTERRUPTS Program Space\r |
| 2cfc146d |
46 | #define IRMP_SUPPORT_SIRCS_PROTOCOL 1 // Sony SIRCS >= 10000 ~150 bytes\r |
| 47 | #define IRMP_SUPPORT_NEC_PROTOCOL 1 // NEC + APPLE >= 10000 ~300 bytes\r |
| 48 | #define IRMP_SUPPORT_SAMSUNG_PROTOCOL 1 // Samsung + Samsung32 >= 10000 ~300 bytes\r |
| 2eab5ec9 |
49 | #define IRMP_SUPPORT_MATSUSHITA_PROTOCOL 1 // Matsushita >= 10000 ~50 bytes\r |
| 770a1a9d |
50 | #define IRMP_SUPPORT_KASEIKYO_PROTOCOL 1 // Kaseikyo >= 10000 ~250 bytes\r |
| 53c11f07 |
51 | #define IRMP_SUPPORT_DENON_PROTOCOL 1 // DENON, Sharp >= 10000 ~250 bytes\r |
| 35213800 |
52 | \r |
| 66c864ba |
53 | // more protocols, enable here! Enable Remarks F_INTERRUPTS Program Space\r |
| 54 | #define IRMP_SUPPORT_RC5_PROTOCOL 0 // RC5 >= 10000 ~250 bytes\r |
| 83b279ab |
55 | #define IRMP_SUPPORT_RC6_PROTOCOL 0 // RC6 & RC6A >= 10000 ~250 bytes\r |
| 56 | #define IRMP_SUPPORT_JVC_PROTOCOL 0 // JVC >= 10000 ~150 bytes\r |
| 57 | #define IRMP_SUPPORT_NEC16_PROTOCOL 0 // NEC16 >= 10000 ~100 bytes\r |
| 58 | #define IRMP_SUPPORT_NEC42_PROTOCOL 0 // NEC42 >= 10000 ~300 bytes\r |
| 2cfc146d |
59 | #define IRMP_SUPPORT_IR60_PROTOCOL 0 // IR60 (SAB2008) >= 10000 ~300 bytes\r |
| 60 | #define IRMP_SUPPORT_GRUNDIG_PROTOCOL 0 // Grundig >= 10000 ~300 bytes\r |
| f50e01e7 |
61 | #define IRMP_SUPPORT_SIEMENS_PROTOCOL 0 // Siemens Gigaset >= 15000 ~550 bytes\r |
| 2cfc146d |
62 | #define IRMP_SUPPORT_NOKIA_PROTOCOL 0 // Nokia >= 10000 ~300 bytes\r |
| f50e01e7 |
63 | \r |
| 64 | // exotic protocols, enable here! Enable Remarks F_INTERRUPTS Program Space\r |
| 2cfc146d |
65 | #define IRMP_SUPPORT_KATHREIN_PROTOCOL 0 // Kathrein >= 10000 ~200 bytes\r |
| 2b832dad |
66 | #define IRMP_SUPPORT_NUBERT_PROTOCOL 0 // NUBERT >= 10000 ~50 bytes\r |
| 67 | #define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL 0 // Bang & Olufsen >= 10000 ~200 bytes\r |
| 31c1f035 |
68 | #define IRMP_SUPPORT_RECS80_PROTOCOL 0 // RECS80 (SAA3004) >= 15000 ~50 bytes\r |
| 69 | #define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0 // RECS80EXT (SAA3008) >= 15000 ~50 bytes\r |
| 63b94f48 |
70 | #define IRMP_SUPPORT_THOMSON_PROTOCOL 0 // Thomson >= 10000 ~250 bytes\r |
| 66c864ba |
71 | #define IRMP_SUPPORT_NIKON_PROTOCOL 0 // NIKON camera >= 10000 ~250 bytes\r |
| a42d1ee6 |
72 | #define IRMP_SUPPORT_NETBOX_PROTOCOL 0 // Netbox keyboard >= 10000 ~400 bytes (PROTOTYPE!)\r |
| 2cfc146d |
73 | #define IRMP_SUPPORT_FDC_PROTOCOL 0 // FDC3402 keyboard >= 10000 (better 15000) ~150 bytes (~400 in combination with RC5)\r |
| 2b832dad |
74 | #define IRMP_SUPPORT_RCCAR_PROTOCOL 0 // RC Car >= 10000 (better 15000) ~150 bytes (~500 in combination with RC5)\r |
| 2cfc146d |
75 | #define IRMP_SUPPORT_RUWIDO_PROTOCOL 0 // RUWIDO, T-Home >= 15000 ~550 bytes\r |
| f50e01e7 |
76 | #define IRMP_SUPPORT_LEGO_PROTOCOL 0 // LEGO Power RC >= 20000 ~150 bytes\r |
| d823e852 |
77 | \r |
| cb8474cc |
78 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r |
| 79 | * Change hardware pin here:\r |
| 80 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r |
| 81 | */\r |
| 93ba2e01 |
82 | #if defined (PIC_C18) // Microchip C18 Compiler\r |
| 83 | #include <p18cxxx.h> // main PIC18 h file\r |
| 84 | #define IRMP_PIN PORTBbits.RB4 // use RB4 as IR input on PIC\r |
| 85 | #define input(x) (x)\r |
| cb8474cc |
86 | \r |
| 93ba2e01 |
87 | #elif defined (PIC_CCS_COMPILER) // PIC CCS Compiler:\r |
| 88 | #define IRMP_PIN PIN_B4 // use PB4 as IR input on PIC\r |
| cb8474cc |
89 | \r |
| 93ba2e01 |
90 | #else // AVR:\r |
| cb8474cc |
91 | #define IRMP_PORT PORTB\r |
| 92 | #define IRMP_DDR DDRB\r |
| 93 | #define IRMP_PIN PINB\r |
| 93ba2e01 |
94 | #define IRMP_BIT 6 // use PB6 as IR input on AVR\r |
| cb8474cc |
95 | #define input(x) ((x) & (1 << IRMP_BIT))\r |
| 96 | #endif\r |
| 97 | \r |
| 98 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r |
| 99 | * Set IRMP_LOGGING to 1 if want to log data to UART with 9600Bd\r |
| 100 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r |
| 101 | */\r |
| 879b06c2 |
102 | #ifndef IRMP_LOGGING\r |
| 103 | #define IRMP_LOGGING 0 // 1: log IR signal (scan), 0: do not (default)\r |
| 104 | #endif\r |
| cb8474cc |
105 | \r |
| 6c3c57e6 |
106 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r |
| 107 | * Use external logging routines\r |
| 108 | * If you enable external logging, you have also to enable IRMP_LOGGING above\r |
| 109 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r |
| 110 | */\r |
| 111 | #ifndef IRMP_EXT_LOGGING\r |
| 112 | #define IRMP_EXT_LOGGING 0 // 1:log, 0: do not log ; \r |
| 113 | #endif\r |
| 114 | \r |
| 1f54e86c |
115 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r |
| 116 | * Set IRMP_PROTOCOL_NAMES to 1 if want to access protocol names (for logging etc), costs ~300 bytes RAM!\r |
| 117 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r |
| 118 | */\r |
| 119 | #define IRMP_PROTOCOL_NAMES 0 // 1: access protocol names, 0: do not (default),\r |
| 120 | \r |
| 7644ac04 |
121 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r |
| 122 | * Use Callbacks to indicate input signal\r |
| 123 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r |
| 124 | */\r |
| 125 | #define IRMP_USE_CALLBACK 0 // flag: 0 = don't use callbacks, 1 = use callbacks, default is 0\r |
| 126 | \r |
| 1aee56bc |
127 | /*---------------------------------------------------------------------------------------------------------------------------------------------------\r |
| 128 | * DO NOT CHANGE THE FOLLOWING LINES !\r |
| 129 | *---------------------------------------------------------------------------------------------------------------------------------------------------\r |
| 130 | */\r |
| 2eab5ec9 |
131 | #if IRMP_SUPPORT_SIEMENS_PROTOCOL == 1 && F_INTERRUPTS < 15000\r |
| 93ba2e01 |
132 | # warning F_INTERRUPTS too low, SIEMENS protocol disabled (should be at least 15000)\r |
| 133 | # undef IRMP_SUPPORT_SIEMENS_PROTOCOL\r |
| 134 | # define IRMP_SUPPORT_SIEMENS_PROTOCOL 0\r |
| 2eab5ec9 |
135 | #endif\r |
| 136 | \r |
| 12948cf3 |
137 | #if IRMP_SUPPORT_RUWIDO_PROTOCOL == 1 && F_INTERRUPTS < 15000\r |
| 93ba2e01 |
138 | # warning F_INTERRUPTS too low, RUWIDO protocol disabled (should be at least 15000)\r |
| 139 | # undef IRMP_SUPPORT_RUWIDO_PROTOCOL\r |
| 140 | # define IRMP_SUPPORT_RUWIDO_PROTOCOL 0\r |
| 12948cf3 |
141 | #endif\r |
| 142 | \r |
| a42d1ee6 |
143 | #if IRMP_SUPPORT_RECS80_PROTOCOL == 1 && F_INTERRUPTS < 15000\r |
| 93ba2e01 |
144 | # warning F_INTERRUPTS too low, RECS80 protocol disabled (should be at least 15000)\r |
| 145 | # undef IRMP_SUPPORT_RECS80_PROTOCOL\r |
| 146 | # define IRMP_SUPPORT_RECS80_PROTOCOL 0\r |
| 2eab5ec9 |
147 | #endif\r |
| 148 | \r |
| a42d1ee6 |
149 | #if IRMP_SUPPORT_RECS80EXT_PROTOCOL == 1 && F_INTERRUPTS < 15000\r |
| 93ba2e01 |
150 | # warning F_INTERRUPTS too low, RECS80EXT protocol disabled (should be at least 15000)\r |
| 151 | # undef IRMP_SUPPORT_RECS80EXT_PROTOCOL\r |
| 152 | # define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0\r |
| 2eab5ec9 |
153 | #endif\r |
| 154 | \r |
| f50e01e7 |
155 | #if IRMP_SUPPORT_LEGO_PROTOCOL == 1 && F_INTERRUPTS < 20000\r |
| 93ba2e01 |
156 | # warning F_INTERRUPTS too low, LEGO protocol disabled (should be at least 20000)\r |
| 157 | # undef IRMP_SUPPORT_LEGO_PROTOCOL\r |
| 158 | # define IRMP_SUPPORT_LEGO_PROTOCOL 0\r |
| f50e01e7 |
159 | #endif\r |
| 160 | \r |
| 770a1a9d |
161 | #if IRMP_SUPPORT_JVC_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0\r |
| 93ba2e01 |
162 | # warning JVC protocol needs also NEC protocol, NEC protocol enabled\r |
| 163 | # undef IRMP_SUPPORT_NEC_PROTOCOL\r |
| 164 | # define IRMP_SUPPORT_NEC_PROTOCOL 1\r |
| 770a1a9d |
165 | #endif\r |
| 166 | \r |
| 35213800 |
167 | #if IRMP_SUPPORT_NEC16_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0\r |
| 93ba2e01 |
168 | # warning NEC16 protocol needs also NEC protocol, NEC protocol enabled\r |
| 169 | # undef IRMP_SUPPORT_NEC_PROTOCOL\r |
| 170 | # define IRMP_SUPPORT_NEC_PROTOCOL 1\r |
| 35213800 |
171 | #endif\r |
| 172 | \r |
| 173 | #if IRMP_SUPPORT_NEC42_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0\r |
| 93ba2e01 |
174 | # warning NEC42 protocol needs also NEC protocol, NEC protocol enabled\r |
| 175 | # undef IRMP_SUPPORT_NEC_PROTOCOL\r |
| 176 | # define IRMP_SUPPORT_NEC_PROTOCOL 1\r |
| 35213800 |
177 | #endif\r |
| 178 | \r |
| 12948cf3 |
179 | #if F_INTERRUPTS > 20000\r |
| 35213800 |
180 | #error F_INTERRUPTS too high (should be not greater than 20000)\r |
| 12948cf3 |
181 | #endif\r |
| 182 | \r |
| cb8474cc |
183 | #endif /* _WC_IRMPCONFIG_H_ */\r |
projects / irmp.git / blame