]> cloudbase.mooo.com Git - irmp.git/blob - irmpprotocols.h
Version 2.6.8: added merlin protocol
[irmp.git] / irmpprotocols.h
1 /*---------------------------------------------------------------------------------------------------------------------------------------------------
2 * irmpprotocols.h - irmp protocols
3 *
4 * DO NOT INCLUDE THIS FILE, WILL BE INCLUDED BY IRMP.H or IRSND.H!
5 *
6 * Copyright (c) 2013-2014 Frank Meyer - frank(at)fli4l.de
7 *
8 * $Id: irmpprotocols.h,v 1.29 2015/01/19 10:54:37 fm Exp $
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
14 *---------------------------------------------------------------------------------------------------------------------------------------------------
15 */
16
17 #ifndef _IRMP_PROTOCOLS_H_
18 #define _IRMP_PROTOCOLS_H_
19
20 #if !defined(_IRMP_H_) && !defined(_IRSND_H_)
21 # error please include only irmp.h or irsnd.h, not irmpprotocols.h
22 #endif
23
24 /*---------------------------------------------------------------------------------------------------------------------------------------------------
25 * IR protocols:
26 *---------------------------------------------------------------------------------------------------------------------------------------------------
27 */
28 #define IRMP_SIRCS_PROTOCOL 1 // Sony
29 #define IRMP_NEC_PROTOCOL 2 // NEC, Pioneer, JVC, Toshiba, NoName etc.
30 #define IRMP_SAMSUNG_PROTOCOL 3 // Samsung
31 #define IRMP_MATSUSHITA_PROTOCOL 4 // Matsushita
32 #define IRMP_KASEIKYO_PROTOCOL 5 // Kaseikyo (Panasonic etc)
33 #define IRMP_RECS80_PROTOCOL 6 // Philips, Thomson, Nordmende, Telefunken, Saba
34 #define IRMP_RC5_PROTOCOL 7 // Philips etc
35 #define IRMP_DENON_PROTOCOL 8 // Denon, Sharp
36 #define IRMP_RC6_PROTOCOL 9 // Philips etc
37 #define IRMP_SAMSUNG32_PROTOCOL 10 // Samsung32: no sync pulse at bit 16, length 32 instead of 37
38 #define IRMP_APPLE_PROTOCOL 11 // Apple, very similar to NEC
39 #define IRMP_RECS80EXT_PROTOCOL 12 // Philips, Technisat, Thomson, Nordmende, Telefunken, Saba
40 #define IRMP_NUBERT_PROTOCOL 13 // Nubert
41 #define IRMP_BANG_OLUFSEN_PROTOCOL 14 // Bang & Olufsen
42 #define IRMP_GRUNDIG_PROTOCOL 15 // Grundig
43 #define IRMP_NOKIA_PROTOCOL 16 // Nokia
44 #define IRMP_SIEMENS_PROTOCOL 17 // Siemens, e.g. Gigaset
45 #define IRMP_FDC_PROTOCOL 18 // FDC keyboard
46 #define IRMP_RCCAR_PROTOCOL 19 // RC Car
47 #define IRMP_JVC_PROTOCOL 20 // JVC (NEC with 16 bits)
48 #define IRMP_RC6A_PROTOCOL 21 // RC6A, e.g. Kathrein, XBOX
49 #define IRMP_NIKON_PROTOCOL 22 // Nikon
50 #define IRMP_RUWIDO_PROTOCOL 23 // Ruwido, e.g. T-Home Mediareceiver
51 #define IRMP_IR60_PROTOCOL 24 // IR60 (SDA2008)
52 #define IRMP_KATHREIN_PROTOCOL 25 // Kathrein
53 #define IRMP_NETBOX_PROTOCOL 26 // Netbox keyboard (bitserial)
54 #define IRMP_NEC16_PROTOCOL 27 // NEC with 16 bits (incl. sync)
55 #define IRMP_NEC42_PROTOCOL 28 // NEC with 42 bits
56 #define IRMP_LEGO_PROTOCOL 29 // LEGO Power Functions RC
57 #define IRMP_THOMSON_PROTOCOL 30 // Thomson
58 #define IRMP_BOSE_PROTOCOL 31 // BOSE
59 #define IRMP_A1TVBOX_PROTOCOL 32 // A1 TV Box
60 #define IRMP_ORTEK_PROTOCOL 33 // ORTEK - Hama
61 #define IRMP_TELEFUNKEN_PROTOCOL 34 // Telefunken (1560)
62 #define IRMP_ROOMBA_PROTOCOL 35 // iRobot Roomba vacuum cleaner
63 #define IRMP_RCMM32_PROTOCOL 36 // Fujitsu-Siemens (Activy remote control)
64 #define IRMP_RCMM24_PROTOCOL 37 // Fujitsu-Siemens (Activy keyboard)
65 #define IRMP_RCMM12_PROTOCOL 38 // Fujitsu-Siemens (Activy keyboard)
66 #define IRMP_SPEAKER_PROTOCOL 39 // Another loudspeaker protocol, similar to Nubert
67 #define IRMP_LGAIR_PROTOCOL 40 // LG air conditioner
68 #define IRMP_SAMSUNG48_PROTOCOL 41 // air conditioner with SAMSUNG protocol (48 bits)
69 #define IRMP_MERLIN_PROTOCOL 42 // Merlin (Pollin 620 185)
70
71 #define IRMP_RADIO1_PROTOCOL 43 // Radio protocol (experimental status), do not use it yet!
72
73 #define IRMP_N_PROTOCOLS 43 // number of supported protocols
74
75 /*---------------------------------------------------------------------------------------------------------------------------------------------------
76 * timing constants:
77 *---------------------------------------------------------------------------------------------------------------------------------------------------
78 */
79 // fm 22.09.2011: may not be more than 16000L, otherwise some JVC codes will not be accepted
80 #define IRMP_TIMEOUT_TIME 15500.0e-6 // timeout after 15.5 ms darkness
81 #define IRMP_TIMEOUT_TIME_MS 15500L // timeout after 15.5 ms darkness
82
83 #if IRMP_SUPPORT_NIKON_PROTOCOL == 1
84 # define IRMP_TIMEOUT_NIKON_TIME 29500.0e-6 // 2nd timeout after 29.5 ms darkness (only for NIKON!)
85 # define IRMP_TIMEOUT_NIKON_TIME_MS 29500L // 2nd timeout after 29.5 ms darkness
86 typedef uint16_t PAUSE_LEN;
87 # define IRMP_TIMEOUT_NIKON_LEN (PAUSE_LEN)(F_INTERRUPTS * IRMP_TIMEOUT_NIKON_TIME + 0.5)
88 #else
89 # if (F_INTERRUPTS * IRMP_TIMEOUT_TIME_MS) / 1000000 >= 254
90 typedef uint16_t PAUSE_LEN;
91 # else
92 typedef uint8_t PAUSE_LEN;
93 # endif
94 #endif
95
96 #define IRMP_TIMEOUT_LEN (PAUSE_LEN)(F_INTERRUPTS * IRMP_TIMEOUT_TIME + 0.5)
97
98 /*---------------------------------------------------------------------------------------------------------------------------------------------------
99 * flags of struct IRMP_PARAMETER:
100 *---------------------------------------------------------------------------------------------------------------------------------------------------
101 */
102 #define IRMP_PARAM_FLAG_IS_MANCHESTER 0x01
103 #define IRMP_PARAM_FLAG_1ST_PULSE_IS_1 0x02
104 #define IRMP_PARAM_FLAG_IS_SERIAL 0x04
105
106 /*---------------------------------------------------------------------------------------------------------------------------------------------------
107 * SIRCS:
108 *---------------------------------------------------------------------------------------------------------------------------------------------------
109 */
110 #define SIRCS_START_BIT_PULSE_TIME 2400.0e-6 // 2400 usec pulse
111 #define SIRCS_START_BIT_PAUSE_TIME 600.0e-6 // 600 usec pause
112 #define SIRCS_1_PULSE_TIME 1200.0e-6 // 1200 usec pulse
113 #define SIRCS_0_PULSE_TIME 600.0e-6 // 600 usec pulse
114 #define SIRCS_PAUSE_TIME 600.0e-6 // 600 usec pause
115 #define SIRCS_FRAMES 3 // SIRCS sends each frame 3 times
116 #define SIRCS_AUTO_REPETITION_PAUSE_TIME 25.0e-3 // auto repetition after 25ms
117 #define SIRCS_FRAME_REPEAT_PAUSE_TIME 25.0e-3 // frame repeat after 25ms
118 #define SIRCS_ADDRESS_OFFSET 15 // skip 15 bits
119 #define SIRCS_ADDRESS_LEN 5 // read up to 5 address bits
120 #define SIRCS_COMMAND_OFFSET 0 // skip 0 bits
121 #define SIRCS_COMMAND_LEN 15 // read 12-15 command bits
122 #define SIRCS_MINIMUM_DATA_LEN 12 // minimum data length
123 #define SIRCS_COMPLETE_DATA_LEN 20 // complete length - may be up to 20
124 #define SIRCS_STOP_BIT 0 // has no stop bit
125 #define SIRCS_LSB 1 // LSB...MSB
126 #define SIRCS_FLAGS 0 // flags
127
128 /*---------------------------------------------------------------------------------------------------------------------------------------------------
129 * NEC & NEC42 & NEC16 & LGAIR:
130 *---------------------------------------------------------------------------------------------------------------------------------------------------
131 */
132 #define NEC_START_BIT_PULSE_TIME 9000.0e-6 // 9000 usec pulse
133 #define NEC_START_BIT_PAUSE_TIME 4500.0e-6 // 4500 usec pause
134 #define NEC_REPEAT_START_BIT_PAUSE_TIME 2250.0e-6 // 2250 usec pause
135 #define NEC_PULSE_TIME 560.0e-6 // 560 usec pulse
136 #define NEC_1_PAUSE_TIME 1690.0e-6 // 1690 usec pause
137 #define NEC_0_PAUSE_TIME 560.0e-6 // 560 usec pause
138 #define NEC_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms
139 #define NEC_ADDRESS_OFFSET 0 // skip 0 bits
140 #define NEC_ADDRESS_LEN 16 // read 16 address bits
141 #define NEC_COMMAND_OFFSET 16 // skip 16 bits (8 address + 8 /address)
142 #define NEC_COMMAND_LEN 16 // read 16 bits (8 command + 8 /command)
143 #define NEC_COMPLETE_DATA_LEN 32 // complete length
144 #define NEC_STOP_BIT 1 // has stop bit
145 #define NEC_LSB 1 // LSB...MSB
146 #define NEC_FLAGS 0 // flags
147
148 #define NEC42_ADDRESS_OFFSET 0 // skip 0 bits
149 #define NEC42_ADDRESS_LEN 13 // read 13 address bits
150 #define NEC42_COMMAND_OFFSET 26 // skip 26 bits (2 x 13 address bits)
151 #define NEC42_COMMAND_LEN 8 // read 8 command bits
152 #define NEC42_COMPLETE_DATA_LEN 42 // complete length (2 x 13 + 2 x 8)
153
154 #define LGAIR_ADDRESS_OFFSET 0 // skip 0 bits
155 #define LGAIR_ADDRESS_LEN 8 // read 8 address bits
156 #define LGAIR_COMMAND_OFFSET 8 // skip 8 bits (8 address)
157 #define LGAIR_COMMAND_LEN 16 // read 16 bits (16 command)
158 #define LGAIR_COMPLETE_DATA_LEN 28 // complete length (8 address + 16 command + 4 checksum)
159
160 #define NEC16_ADDRESS_OFFSET 0 // skip 0 bits
161 #define NEC16_ADDRESS_LEN 8 // read 8 address bits
162 #define NEC16_COMMAND_OFFSET 8 // skip 8 bits (8 address)
163 #define NEC16_COMMAND_LEN 8 // read 8 bits (8 command)
164 #define NEC16_COMPLETE_DATA_LEN 16 // complete length
165
166 /*---------------------------------------------------------------------------------------------------------------------------------------------------
167 * SAMSUNG & SAMSUNG32 & SAMSUNG48:
168 *---------------------------------------------------------------------------------------------------------------------------------------------------
169 */
170 #define SAMSUNG_START_BIT_PULSE_TIME 4500.0e-6 // 4500 usec pulse
171 #define SAMSUNG_START_BIT_PAUSE_TIME 4500.0e-6 // 4500 usec pause
172 #define SAMSUNG_PULSE_TIME 550.0e-6 // 550 usec pulse
173 #define SAMSUNG_1_PAUSE_TIME 1500.0e-6 // 1550 usec pause
174 #define SAMSUNG_0_PAUSE_TIME 500.0e-6 // 500 usec pause
175
176 #define SAMSUNG_FRAME_REPEAT_PAUSE_TIME 25.0e-3 // frame repeat after 25ms
177 #define SAMSUNG_ADDRESS_OFFSET 0 // skip 0 bits
178 #define SAMSUNG_ADDRESS_LEN 16 // read 16 address bits
179 #define SAMSUNG_ID_OFFSET 17 // skip 16 + 1 sync bit
180 #define SAMSUNG_ID_LEN 4 // read 4 id bits
181 #define SAMSUNG_COMMAND_OFFSET 21 // skip 16 + 1 sync + 4 data bits
182 #define SAMSUNG_COMMAND_LEN 16 // read 16 command bits
183 #define SAMSUNG_COMPLETE_DATA_LEN 37 // complete length
184 #define SAMSUNG_STOP_BIT 1 // has stop bit
185 #define SAMSUNG_LSB 1 // LSB...MSB?
186 #define SAMSUNG_FLAGS 0 // flags
187
188 #define SAMSUNG32_COMMAND_OFFSET 16 // skip 16 bits
189 #define SAMSUNG32_COMMAND_LEN 16 // read 16 command bits
190 #define SAMSUNG32_COMPLETE_DATA_LEN 32 // complete length
191 #define SAMSUNG32_FRAMES 2 // SAMSUNG32 sends each frame 2 times // fm: correct?
192 #define SAMSUNG32_AUTO_REPETITION_PAUSE_TIME 47.0e-3 // repetition after 47 ms
193 #define SAMSUNG32_FRAME_REPEAT_PAUSE_TIME 47.0e-3 // frame repeat after 47ms
194
195 #define SAMSUNG48_COMMAND_OFFSET 16 // skip 16 bits
196 #define SAMSUNG48_COMMAND_LEN 32 // read 32 command bits
197 #define SAMSUNG48_COMPLETE_DATA_LEN 48 // complete length
198 #define SAMSUNG48_FRAMES 2 // SAMSUNG48 sends each frame 2 times
199 #define SAMSUNG48_AUTO_REPETITION_PAUSE_TIME 5.0e-3 // repetition after 5 ms
200 #define SAMSUNG48_FRAME_REPEAT_PAUSE_TIME 47.0e-3 // frame repeat after 47ms
201
202 /*---------------------------------------------------------------------------------------------------------------------------------------------------
203 * MATSUSHITA:
204 *---------------------------------------------------------------------------------------------------------------------------------------------------
205 */
206 #define MATSUSHITA_START_BIT_PULSE_TIME 3488.0e-6 // 3488 usec pulse
207 #define MATSUSHITA_START_BIT_PAUSE_TIME 3488.0e-6 // 3488 usec pause
208 #define MATSUSHITA_PULSE_TIME 872.0e-6 // 872 usec pulse
209 #define MATSUSHITA_1_PAUSE_TIME 2616.0e-6 // 2616 usec pause
210 #define MATSUSHITA_0_PAUSE_TIME 872.0e-6 // 872 usec pause
211 #define MATSUSHITA_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms
212 #define MATSUSHITA_ADDRESS_OFFSET 12 // skip 12 bits
213 #define MATSUSHITA_ADDRESS_LEN 12 // read 12 address bits
214 #define MATSUSHITA_COMMAND_OFFSET 0 // skip 0 bits
215 #define MATSUSHITA_COMMAND_LEN 12 // read 12 bits (6 custom + 6 command)
216 #define MATSUSHITA_COMPLETE_DATA_LEN 24 // complete length
217 #define MATSUSHITA_STOP_BIT 1 // has stop bit
218 #define MATSUSHITA_LSB 1 // LSB...MSB?
219 #define MATSUSHITA_FLAGS 0 // flags
220
221 /*---------------------------------------------------------------------------------------------------------------------------------------------------
222 * KASEIKYO:
223 *---------------------------------------------------------------------------------------------------------------------------------------------------
224 */
225 #define KASEIKYO_START_BIT_PULSE_TIME 3380.0e-6 // 3380 usec pulse
226 #define KASEIKYO_START_BIT_PAUSE_TIME 1690.0e-6 // 1690 usec pause
227 #define KASEIKYO_PULSE_TIME 423.0e-6 // 525 usec pulse
228 #define KASEIKYO_1_PAUSE_TIME 1269.0e-6 // 525 usec pause
229 #define KASEIKYO_0_PAUSE_TIME 423.0e-6 // 1690 usec pause
230 #define KASEIKYO_AUTO_REPETITION_PAUSE_TIME 74.0e-3 // repetition after 74 ms
231 #define KASEIKYO_FRAME_REPEAT_PAUSE_TIME 74.0e-3 // frame repeat after 74 ms
232 #define KASEIKYO_ADDRESS_OFFSET 0 // skip 0 bits
233 #define KASEIKYO_ADDRESS_LEN 16 // read 16 address bits
234 #define KASEIKYO_COMMAND_OFFSET 28 // skip 28 bits (16 manufacturer & 4 parity & 8 genre)
235 #define KASEIKYO_COMMAND_LEN 12 // read 12 command bits (10 real command & 2 id)
236 #define KASEIKYO_COMPLETE_DATA_LEN 48 // complete length
237 #define KASEIKYO_STOP_BIT 1 // has stop bit
238 #define KASEIKYO_LSB 1 // LSB...MSB?
239 #define KASEIKYO_FRAMES 2 // KASEIKYO sends 1st frame 2 times
240 #define KASEIKYO_FLAGS 0 // flags
241
242 /*---------------------------------------------------------------------------------------------------------------------------------------------------
243 * RECS80:
244 *---------------------------------------------------------------------------------------------------------------------------------------------------
245 */
246 #define RECS80_START_BIT_PULSE_TIME 158.0e-6 // 158 usec pulse
247 #define RECS80_START_BIT_PAUSE_TIME 7432.0e-6 // 7432 usec pause
248 #define RECS80_PULSE_TIME 158.0e-6 // 158 usec pulse
249 #define RECS80_1_PAUSE_TIME 7432.0e-6 // 7432 usec pause
250 #define RECS80_0_PAUSE_TIME 4902.0e-6 // 4902 usec pause
251 #define RECS80_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
252 #define RECS80_ADDRESS_OFFSET 1 // skip 1 bit (toggle bit)
253 #define RECS80_ADDRESS_LEN 3 // read 3 address bits
254 #define RECS80_COMMAND_OFFSET 4 // skip 4 bits (1 toggle + 3 address)
255 #define RECS80_COMMAND_LEN 6 // read 6 command bits
256 #define RECS80_COMPLETE_DATA_LEN 10 // complete length
257 #define RECS80_STOP_BIT 1 // has stop bit
258 #define RECS80_LSB 0 // MSB...LSB
259 #define RECS80_FLAGS 0 // flags
260
261 /*---------------------------------------------------------------------------------------------------------------------------------------------------
262 * RC5:
263 *---------------------------------------------------------------------------------------------------------------------------------------------------
264 */
265 #define RC5_BIT_TIME 889.0e-6 // 889 usec pulse/pause
266 #define RC5_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
267
268 #define RC5_ADDRESS_OFFSET 1 // skip 1 bit (2nd start)
269 #define RC5_ADDRESS_LEN 6 // read 1 toggle bit (for key repetition detection) + 5 address bits
270 #define RC5_COMMAND_OFFSET 7 // skip 5 bits (2nd start + 1 toggle + 5 address)
271 #define RC5_COMMAND_LEN 6 // read 6 command bits
272 #define RC5_COMPLETE_DATA_LEN 13 // complete length
273 #define RC5_STOP_BIT 0 // has no stop bit
274 #define RC5_LSB 0 // MSB...LSB
275 #define RC5_FLAGS IRMP_PARAM_FLAG_IS_MANCHESTER // flags
276
277 /*---------------------------------------------------------------------------------------------------------------------------------------------------
278 * DENON:
279 *---------------------------------------------------------------------------------------------------------------------------------------------------
280 */
281 #define DENON_PULSE_TIME 310.0e-6 // 310 usec pulse in practice, 275 in theory
282 #define DENON_1_PAUSE_TIME 1780.0e-6 // 1780 usec pause in practice, 1900 in theory
283 #define DENON_0_PAUSE_TIME 745.0e-6 // 745 usec pause in practice, 775 in theory
284 #define DENON_FRAMES 2 // DENON sends each frame 2 times
285 #define DENON_AUTO_REPETITION_PAUSE_TIME 65.0e-3 // inverted repetition after 65ms
286 #define DENON_FRAME_REPEAT_PAUSE_TIME 130.0e-3 // frame repeat after 2 * 65ms
287 #define DENON_ADDRESS_OFFSET 0 // skip 0 bits
288 #define DENON_ADDRESS_LEN 5 // read 5 address bits
289 #define DENON_COMMAND_OFFSET 5 // skip 5
290 #define DENON_COMMAND_LEN 10 // read 10 command bits
291 #define DENON_COMPLETE_DATA_LEN 15 // complete length
292 #define DENON_STOP_BIT 1 // has stop bit
293 #define DENON_LSB 0 // MSB...LSB
294 #define DENON_FLAGS 0 // flags
295
296 /*---------------------------------------------------------------------------------------------------------------------------------------------------
297 * RC6:
298 *---------------------------------------------------------------------------------------------------------------------------------------------------
299 */
300 #define RC6_START_BIT_PULSE_TIME 2666.0e-6 // 2.666 msec pulse
301 #define RC6_START_BIT_PAUSE_TIME 889.0e-6 // 889 usec pause
302 #define RC6_TOGGLE_BIT_TIME 889.0e-6 // 889 msec pulse/pause
303 #define RC6_BIT_TIME 444.0e-6 // 889 usec pulse/pause
304 #define RC6_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
305 #define RC6_ADDRESS_OFFSET 5 // skip "1" + 3 mode bits + 1 toggle bit
306 #define RC6_ADDRESS_LEN 8 // read 8 address bits
307 #define RC6_COMMAND_OFFSET 13 // skip 12 bits ("1" + 3 mode + 1 toggle + 8 address)
308 #define RC6_COMMAND_LEN 8 // read 8 command bits
309 #define RC6_COMPLETE_DATA_LEN_SHORT 21 // complete length
310 #define RC6_COMPLETE_DATA_LEN_LONG 36 // complete length
311 #define RC6_STOP_BIT 0 // has no stop bit
312 #define RC6_LSB 0 // MSB...LSB
313 #define RC6_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags
314
315 /*---------------------------------------------------------------------------------------------------------------------------------------------------
316 * RECS80EXT:
317 *---------------------------------------------------------------------------------------------------------------------------------------------------
318 */
319 #define RECS80EXT_START_BIT_PULSE_TIME 158.0e-6 // 158 usec pulse
320 #define RECS80EXT_START_BIT_PAUSE_TIME 3637.0e-6 // 3637 usec pause
321 #define RECS80EXT_PULSE_TIME 158.0e-6 // 158 usec pulse
322 #define RECS80EXT_1_PAUSE_TIME 7432.0e-6 // 7432 usec pause
323 #define RECS80EXT_0_PAUSE_TIME 4902.0e-6 // 4902 usec pause
324 #define RECS80EXT_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
325 #define RECS80EXT_ADDRESS_OFFSET 2 // skip 2 bits (2nd start + 1 toggle)
326 #define RECS80EXT_ADDRESS_LEN 4 // read 4 address bits
327 #define RECS80EXT_COMMAND_OFFSET 6 // skip 6 bits (2nd start + 1 toggle + 4 address)
328 #define RECS80EXT_COMMAND_LEN 6 // read 6 command bits
329 #define RECS80EXT_COMPLETE_DATA_LEN 12 // complete length
330 #define RECS80EXT_STOP_BIT 1 // has stop bit
331 #define RECS80EXT_LSB 0 // MSB...LSB
332 #define RECS80EXT_FLAGS 0 // flags
333
334 /*---------------------------------------------------------------------------------------------------------------------------------------------------
335 * NUBERT:
336 *---------------------------------------------------------------------------------------------------------------------------------------------------
337 */
338 #define NUBERT_START_BIT_PULSE_TIME 1340.0e-6 // 1340 usec pulse
339 #define NUBERT_START_BIT_PAUSE_TIME 340.0e-6 // 340 usec pause
340 #define NUBERT_1_PULSE_TIME 1340.0e-6 // 1340 usec pulse
341 #define NUBERT_1_PAUSE_TIME 340.0e-6 // 340 usec pause
342 #define NUBERT_0_PULSE_TIME 500.0e-6 // 500 usec pulse
343 #define NUBERT_0_PAUSE_TIME 1300.0e-6 // 1300 usec pause
344 #define NUBERT_FRAMES 2 // Nubert sends 2 frames
345 #define NUBERT_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // auto repetition after 35ms
346 #define NUBERT_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 45ms
347 #define NUBERT_ADDRESS_OFFSET 0 // skip 0 bits
348 #define NUBERT_ADDRESS_LEN 0 // read 0 address bits
349 #define NUBERT_COMMAND_OFFSET 0 // skip 0 bits
350 #define NUBERT_COMMAND_LEN 10 // read 10 bits
351 #define NUBERT_COMPLETE_DATA_LEN 10 // complete length
352 #define NUBERT_STOP_BIT 1 // has stop bit
353 #define NUBERT_LSB 0 // MSB?
354 #define NUBERT_FLAGS 0 // flags
355
356 /*---------------------------------------------------------------------------------------------------------------------------------------------------
357 * SPEAKER:
358 *---------------------------------------------------------------------------------------------------------------------------------------------------
359 */
360 #define SPEAKER_START_BIT_PULSE_TIME 440.0e-6 // 1340 usec pulse
361 #define SPEAKER_START_BIT_PAUSE_TIME 1250.0e-6 // 340 usec pause
362 #define SPEAKER_1_PULSE_TIME 1250.0e-6 // 1340 usec pulse
363 #define SPEAKER_1_PAUSE_TIME 440.0e-6 // 340 usec pause
364 #define SPEAKER_0_PULSE_TIME 440.0e-6 // 500 usec pulse
365 #define SPEAKER_0_PAUSE_TIME 1250.0e-6 // 1300 usec pause
366 #define SPEAKER_FRAMES 2 // Nubert sends 2 frames
367 #define SPEAKER_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // auto repetition after 35ms
368 #define SPEAKER_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 45ms
369 #define SPEAKER_ADDRESS_OFFSET 0 // skip 0 bits
370 #define SPEAKER_ADDRESS_LEN 0 // read 0 address bits
371 #define SPEAKER_COMMAND_OFFSET 0 // skip 0 bits
372 #define SPEAKER_COMMAND_LEN 10 // read 10 bits
373 #define SPEAKER_COMPLETE_DATA_LEN 10 // complete length
374 #define SPEAKER_STOP_BIT 1 // has stop bit
375 #define SPEAKER_LSB 0 // MSB?
376 #define SPEAKER_FLAGS 0 // flags
377
378 /*---------------------------------------------------------------------------------------------------------------------------------------------------
379 * BANG_OLUFSEN:
380 *---------------------------------------------------------------------------------------------------------------------------------------------------
381 */
382 #define BANG_OLUFSEN_START_BIT1_PULSE_TIME 200.0e-6 // 200 usec pulse
383 #define BANG_OLUFSEN_START_BIT1_PAUSE_TIME 3125.0e-6 // 3125 usec pause
384 #define BANG_OLUFSEN_START_BIT2_PULSE_TIME 200.0e-6 // 200 usec pulse
385 #define BANG_OLUFSEN_START_BIT2_PAUSE_TIME 3125.0e-6 // 3125 usec pause
386 #define BANG_OLUFSEN_START_BIT3_PULSE_TIME 200.0e-6 // 200 usec pulse
387 #define BANG_OLUFSEN_START_BIT3_PAUSE_TIME 15625.0e-6 // 15625 usec pause
388 #define BANG_OLUFSEN_START_BIT4_PULSE_TIME 200.0e-6 // 200 usec pulse
389 #define BANG_OLUFSEN_START_BIT4_PAUSE_TIME 3125.0e-6 // 3125 usec pause
390 #define BANG_OLUFSEN_PULSE_TIME 200.0e-6 // 200 usec pulse
391 #define BANG_OLUFSEN_1_PAUSE_TIME 9375.0e-6 // 9375 usec pause
392 #define BANG_OLUFSEN_0_PAUSE_TIME 3125.0e-6 // 3125 usec pause
393 #define BANG_OLUFSEN_R_PAUSE_TIME 6250.0e-6 // 6250 usec pause (repeat last bit)
394 #define BANG_OLUFSEN_TRAILER_BIT_PAUSE_TIME 12500.0e-6 // 12500 usec pause (trailer bit)
395 #define BANG_OLUFSEN_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
396 #define BANG_OLUFSEN_ADDRESS_OFFSET 0 // no address bits
397 #define BANG_OLUFSEN_ADDRESS_LEN 0 // no address bits
398 #define BANG_OLUFSEN_COMMAND_OFFSET 3 // skip startbits 2, 3, 4
399 #define BANG_OLUFSEN_COMMAND_LEN 16 // read 16 command bits
400 #define BANG_OLUFSEN_COMPLETE_DATA_LEN 20 // complete length: startbits 2, 3, 4 + 16 data bits + trailer bit
401 #define BANG_OLUFSEN_STOP_BIT 1 // has stop bit
402 #define BANG_OLUFSEN_LSB 0 // MSB...LSB
403 #define BANG_OLUFSEN_FLAGS 0 // flags
404
405 /*---------------------------------------------------------------------------------------------------------------------------------------------------
406 * GRUNDIG & NOKIA
407 *---------------------------------------------------------------------------------------------------------------------------------------------------
408 */
409 #define GRUNDIG_NOKIA_IR60_BIT_TIME 528.0e-6 // 528 usec pulse/pause
410 #define GRUNDIG_NOKIA_IR60_PRE_PAUSE_TIME 2639.0e-6 // 2639 usec pause after pre bit
411 #define GRUNDIG_NOKIA_IR60_FRAME_REPEAT_PAUSE_TIME 117.76e-3 // info frame repeat after 117.76 ms
412 #define GRUNDIG_NOKIA_IR60_STOP_BIT 0 // has no stop bit
413 #define GRUNDIG_NOKIA_IR60_LSB 1 // MSB...LSB
414 #define GRUNDIG_NOKIA_IR60_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags
415
416 #define GRUNDIG_FRAMES 2 // GRUNDIG sends each frame 1+1 times
417 #define GRUNDIG_AUTO_REPETITION_PAUSE_TIME 20.0e-3 // repetition after 20ms
418 #define GRUNDIG_ADDRESS_OFFSET 0 // no address
419 #define GRUNDIG_ADDRESS_LEN 0 // no address
420 #define GRUNDIG_COMMAND_OFFSET 1 // skip 1 start bit
421 #define GRUNDIG_COMMAND_LEN 9 // read 9 command bits
422 #define GRUNDIG_COMPLETE_DATA_LEN 10 // complete length: 1 start bit + 9 data bits
423
424 #define NOKIA_FRAMES 3 // NOKIA sends each frame 1 + 1 + 1 times
425 #define NOKIA_AUTO_REPETITION_PAUSE_TIME 20.0e-3 // repetition after 20ms
426 #define NOKIA_ADDRESS_OFFSET 9 // skip 9 bits (1 start bit + 8 data bits)
427 #define NOKIA_ADDRESS_LEN 8 // 7 address bits
428 #define NOKIA_COMMAND_OFFSET 1 // skip 1 bit (1 start bit)
429 #define NOKIA_COMMAND_LEN 8 // read 8 command bits
430 #define NOKIA_COMPLETE_DATA_LEN 17 // complete length: 1 start bit + 8 address bits + 8 command bits
431
432 /*---------------------------------------------------------------------------------------------------------------------------------------------------
433 * IR60:
434 *---------------------------------------------------------------------------------------------------------------------------------------------------
435 */
436 #define IR60_FRAMES 2 // IR60 sends each frame 1+1 times
437 #define IR60_AUTO_REPETITION_PAUSE_TIME 22.2e-3 // repetition after 22.2ms
438 #define IR60_TIMEOUT_TIME 5000.0e-6 // timeout grundig frame, switch to IR60
439 #define IR60_ADDRESS_OFFSET 0 // skip 1 bits
440 #define IR60_ADDRESS_LEN 0 // read 0 address bits
441 #define IR60_COMMAND_OFFSET 0 // skip 1 bit (start bit after pre bit, always 1)
442 #define IR60_COMMAND_LEN 7 // read 6 command bits
443 #define IR60_COMPLETE_DATA_LEN 7 // complete length
444
445 /*---------------------------------------------------------------------------------------------------------------------------------------------------
446 * SIEMENS & RUWIDO:
447 *---------------------------------------------------------------------------------------------------------------------------------------------------
448 */
449
450 #if 0
451 #define SIEMENS_OR_RUWIDO_START_BIT_PULSE_TIME 275.0e-6 // 275 usec pulse
452 #define SIEMENS_OR_RUWIDO_START_BIT_PAUSE_TIME 550.0e-6 // 550 usec pause
453 #define SIEMENS_OR_RUWIDO_BIT_PULSE_TIME 275.0e-6 // 275 usec short pulse
454 #define SIEMENS_OR_RUWIDO_BIT_PULSE_TIME_2 550.0e-6 // 550 usec long pulse
455 #define SIEMENS_OR_RUWIDO_BIT_PAUSE_TIME 275.0e-6 // 275 usec short pause
456 #define SIEMENS_OR_RUWIDO_BIT_PAUSE_TIME_2 550.0e-6 // 550 usec long pause
457 #else
458 #define SIEMENS_OR_RUWIDO_START_BIT_PULSE_TIME 370.0e-6 // 370 usec pulse
459 #define SIEMENS_OR_RUWIDO_START_BIT_PAUSE_TIME 550.0e-6 // 550 usec pause
460 #define SIEMENS_OR_RUWIDO_BIT_PULSE_TIME 370.0e-6 // 370 usec short pulse
461 #define SIEMENS_OR_RUWIDO_BIT_PULSE_TIME_2 680.0e-6 // 680 usec long pulse
462 #define SIEMENS_OR_RUWIDO_BIT_PAUSE_TIME 275.0e-6 // 275 usec short pause
463 #define SIEMENS_OR_RUWIDO_BIT_PAUSE_TIME_2 550.0e-6 // 550 usec long pause
464 #endif
465
466 #define SIEMENS_OR_RUWIDO_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
467 #define SIEMENS_OR_RUWIDO_STOP_BIT 0 // has no stop bit
468 #define SIEMENS_OR_RUWIDO_LSB 0 // MSB...LSB
469 #define SIEMENS_OR_RUWIDO_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags
470
471 #define RUWIDO_ADDRESS_OFFSET 0 // skip 0 bits
472 #define RUWIDO_ADDRESS_LEN 9 // read 9 address bits
473 #define RUWIDO_COMMAND_OFFSET 9 // skip 9 bits
474 #define RUWIDO_COMMAND_LEN 8 // read 7 + 1 command bits, last bit is only check bit
475 #define RUWIDO_COMPLETE_DATA_LEN 17 // complete length
476
477 #define SIEMENS_ADDRESS_OFFSET 0 // skip 0 bits
478 #define SIEMENS_ADDRESS_LEN 11 // read 11 bits
479 #define SIEMENS_COMMAND_OFFSET 11 // skip 11 bits
480 #define SIEMENS_COMMAND_LEN 11 // read 10 + 1 command bits, last bit is only check bit
481 #define SIEMENS_COMPLETE_DATA_LEN 22 // complete length
482
483 /*---------------------------------------------------------------------------------------------------------------------------------------------------
484 * FDC:
485 *---------------------------------------------------------------------------------------------------------------------------------------------------
486 */
487 #define FDC_START_BIT_PULSE_TIME 2085.0e-6 // 2085 usec pulse
488 #define FDC_START_BIT_PAUSE_TIME 966.0e-6 // 966 usec pause
489 #define FDC_PULSE_TIME 300.0e-6 // 300 usec pulse
490 #define FDC_1_PAUSE_TIME 715.0e-6 // 715 usec pause
491 #define FDC_0_PAUSE_TIME 220.0e-6 // 220 usec pause
492 #define FDC_FRAME_REPEAT_PAUSE_TIME 60.0e-3 // frame repeat after 60ms
493 #define FDC_ADDRESS_OFFSET 0 // skip 0 bits
494 #define FDC_ADDRESS_LEN 14 // read 14 address bits, but use only 6, shift 8 into command
495 #define FDC_COMMAND_OFFSET 20 // skip 20 bits
496 #define FDC_COMMAND_LEN 12 // read 12 bits
497 #define FDC_COMPLETE_DATA_LEN 40 // complete length
498 #define FDC_STOP_BIT 1 // has stop bit
499 #define FDC_LSB 1 // LSB...MSB
500 #define FDC_FLAGS 0 // flags
501
502 /*---------------------------------------------------------------------------------------------------------------------------------------------------
503 * RCCAR:
504 *---------------------------------------------------------------------------------------------------------------------------------------------------
505 */
506 #define RCCAR_START_BIT_PULSE_TIME 2000.0e-6 // 2000 usec pulse
507 #define RCCAR_START_BIT_PAUSE_TIME 2000.0e-6 // 2000 usec pause
508 #define RCCAR_PULSE_TIME 600.0e-6 // 360 usec pulse
509 #define RCCAR_1_PAUSE_TIME 450.0e-6 // 650 usec pause
510 #define RCCAR_0_PAUSE_TIME 900.0e-6 // 180 usec pause
511 #define RCCAR_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms
512 #define RCCAR_ADDRESS_OFFSET 0 // skip 0 bits
513 #define RCCAR_ADDRESS_LEN 0 // read 0 address bits
514 #define RCCAR_COMMAND_OFFSET 0 // skip 0 bits
515 #define RCCAR_COMMAND_LEN 13 // read 13 bits
516 #define RCCAR_COMPLETE_DATA_LEN 13 // complete length
517 #define RCCAR_STOP_BIT 1 // has stop bit
518 #define RCCAR_LSB 1 // LSB...MSB
519 #define RCCAR_FLAGS 0 // flags
520
521 /*---------------------------------------------------------------------------------------------------------------------------------------------------
522 * JVC:
523 *---------------------------------------------------------------------------------------------------------------------------------------------------
524 */
525 #define JVC_START_BIT_PULSE_TIME 9000.0e-6 // 9000 usec pulse
526 #define JVC_START_BIT_PAUSE_TIME 4500.0e-6 // 4500 usec pause
527 #define JVC_PULSE_TIME 560.0e-6 // 560 usec pulse
528 #define JVC_1_PAUSE_TIME 1690.0e-6 // 1690 usec pause
529 #define JVC_0_PAUSE_TIME 560.0e-6 // 560 usec pause
530 #define JVC_FRAME_REPEAT_PAUSE_TIME 22.0e-3 // frame repeat after 22ms
531 #define JVC_ADDRESS_OFFSET 0 // skip 0 bits
532 #define JVC_ADDRESS_LEN 4 // read 4 address bits
533 #define JVC_COMMAND_OFFSET 4 // skip 4 bits
534 #define JVC_COMMAND_LEN 12 // read 12 bits
535 #define JVC_COMPLETE_DATA_LEN 16 // complete length
536 #define JVC_STOP_BIT 1 // has stop bit
537 #define JVC_LSB 1 // LSB...MSB
538 #define JVC_FLAGS 0 // flags
539
540 /*---------------------------------------------------------------------------------------------------------------------------------------------------
541 * NIKON:
542 *---------------------------------------------------------------------------------------------------------------------------------------------------
543 */
544 #define NIKON_START_BIT_PULSE_TIME 2200.0e-6 // 2200 usec pulse
545 #define NIKON_START_BIT_PAUSE_TIME 27100.0e-6 // 27100 usec pause
546 #define NIKON_PULSE_TIME 500.0e-6 // 500 usec pulse
547 #define NIKON_1_PAUSE_TIME 3500.0e-6 // 3500 usec pause
548 #define NIKON_0_PAUSE_TIME 1500.0e-6 // 1500 usec pause
549 #define NIKON_FRAME_REPEAT_PAUSE_TIME 60.0e-3 // frame repeat after 60ms
550 #define NIKON_ADDRESS_OFFSET 0 // skip 0 bits
551 #define NIKON_ADDRESS_LEN 0 // read 0 address bits
552 #define NIKON_COMMAND_OFFSET 0 // skip 0 bits
553 #define NIKON_COMMAND_LEN 2 // read 2 bits
554 #define NIKON_COMPLETE_DATA_LEN 2 // complete length
555 #define NIKON_STOP_BIT 1 // has stop bit
556 #define NIKON_LSB 0 // LSB...MSB
557 #define NIKON_FLAGS 0 // flags
558
559 /*---------------------------------------------------------------------------------------------------------------------------------------------------
560 * KATHREIN:
561 *---------------------------------------------------------------------------------------------------------------------------------------------------
562 */
563 #define KATHREIN_START_BIT_PULSE_TIME 210.0e-6 // 1340 usec pulse
564 #define KATHREIN_START_BIT_PAUSE_TIME 6218.0e-6 // 340 usec pause
565 #define KATHREIN_1_PULSE_TIME 210.0e-6 // 1340 usec pulse
566 #define KATHREIN_1_PAUSE_TIME 3000.0e-6 // 340 usec pause
567 #define KATHREIN_0_PULSE_TIME 210.0e-6 // 500 usec pulse
568 #define KATHREIN_0_PAUSE_TIME 1400.0e-6 // 1300 usec pause
569 #define KATHREIN_SYNC_BIT_PAUSE_LEN_TIME 4600.0e-6 // 4600 usec sync (on 6th and/or 8th bit)
570 #define KATHREIN_FRAMES 1 // Kathrein sends 1 frame
571 #define KATHREIN_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // auto repetition after 35ms
572 #define KATHREIN_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 35ms
573 #define KATHREIN_ADDRESS_OFFSET 1 // skip 1 bits
574 #define KATHREIN_ADDRESS_LEN 4 // read 4 address bits
575 #define KATHREIN_COMMAND_OFFSET 5 // skip 5 bits
576 #define KATHREIN_COMMAND_LEN 7 // read 7 bits
577 #define KATHREIN_COMPLETE_DATA_LEN 13 // complete length
578 #define KATHREIN_STOP_BIT 1 // has stop bit
579 #define KATHREIN_LSB 0 // MSB
580 #define KATHREIN_FLAGS 0 // flags
581
582 /*---------------------------------------------------------------------------------------------------------------------------------------------------
583 * NETBOX:
584 *---------------------------------------------------------------------------------------------------------------------------------------------------
585 */
586 #define NETBOX_START_BIT_PULSE_TIME 2400.0e-6 // 2400 usec pulse
587 #define NETBOX_START_BIT_PAUSE_TIME 800.0e-6 // 800 usec pause
588 #define NETBOX_PULSE_TIME 800.0e-6 // 800 usec pulse
589 #define NETBOX_PAUSE_TIME 800.0e-6 // 800 usec pause
590 #define NETBOX_FRAMES 1 // Netbox sends 1 frame
591 #define NETBOX_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // auto repetition after 35ms
592 #define NETBOX_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 35ms
593 #define NETBOX_ADDRESS_OFFSET 0 // skip 0 bits
594 #define NETBOX_ADDRESS_LEN 3 // read 3 address bits
595 #define NETBOX_COMMAND_OFFSET 3 // skip 3 bits
596 #define NETBOX_COMMAND_LEN 13 // read 13 bits
597 #define NETBOX_COMPLETE_DATA_LEN 16 // complete length
598 #define NETBOX_STOP_BIT 0 // has no stop bit
599 #define NETBOX_LSB 1 // LSB
600 #define NETBOX_FLAGS IRMP_PARAM_FLAG_IS_SERIAL // flags
601
602 /*---------------------------------------------------------------------------------------------------------------------------------------------------
603 * LEGO:
604 *---------------------------------------------------------------------------------------------------------------------------------------------------
605 */
606 #define LEGO_START_BIT_PULSE_TIME 158.0e-6 // 158 usec pulse ( 6 x 1/38kHz)
607 #define LEGO_START_BIT_PAUSE_TIME 1026.0e-6 // 1026 usec pause (39 x 1/38kHz)
608 #define LEGO_PULSE_TIME 158.0e-6 // 158 usec pulse ( 6 x 1/38kHz)
609 #define LEGO_1_PAUSE_TIME 553.0e-6 // 553 usec pause (21 x 1/38kHz)
610 #define LEGO_0_PAUSE_TIME 263.0e-6 // 263 usec pause (10 x 1/38kHz)
611 #define LEGO_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms
612 #define LEGO_ADDRESS_OFFSET 0 // skip 0 bits
613 #define LEGO_ADDRESS_LEN 0 // read 0 address bits
614 #define LEGO_COMMAND_OFFSET 0 // skip 0 bits
615 #define LEGO_COMMAND_LEN 16 // read 16 bits (12 command + 4 CRC)
616 #define LEGO_COMPLETE_DATA_LEN 16 // complete length
617 #define LEGO_STOP_BIT 1 // has stop bit
618 #define LEGO_LSB 0 // MSB...LSB
619 #define LEGO_FLAGS 0 // flags
620
621 /*---------------------------------------------------------------------------------------------------------------------------------------------------
622 * THOMSON:
623 *---------------------------------------------------------------------------------------------------------------------------------------------------
624 */
625 #define THOMSON_PULSE_TIME 550.0e-6 // 550 usec pulse
626 #define THOMSON_1_PAUSE_TIME 4500.0e-6 // 4500 usec pause
627 #define THOMSON_0_PAUSE_TIME 2000.0e-6 // 2000 usec pause
628 #define THOMSON_FRAMES 1 // THOMSON sends 1 frame
629 #define THOMSON_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // repetition after 35ms
630 #define THOMSON_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 35ms
631 #define THOMSON_ADDRESS_OFFSET 0 // skip 0 bits
632 #define THOMSON_ADDRESS_LEN 4 // read 4 address bits
633 #define THOMSON_COMMAND_OFFSET 5 // skip 4 address bits + 1 toggle bit
634 #define THOMSON_COMMAND_LEN 7 // read 7 command bits
635 #define THOMSON_COMPLETE_DATA_LEN 12 // complete length
636 #define THOMSON_STOP_BIT 1 // has stop bit
637 #define THOMSON_LSB 0 // MSB...LSB
638 #define THOMSON_FLAGS 0 // flags
639
640 /*---------------------------------------------------------------------------------------------------------------------------------------------------
641 * BOSE:
642 *---------------------------------------------------------------------------------------------------------------------------------------------------
643 */
644 #define BOSE_START_BIT_PULSE_TIME 1060.0e-6 // 1060 usec pulse
645 #define BOSE_START_BIT_PAUSE_TIME 1425.0e-6 // 1425 usec pause
646 #define BOSE_PULSE_TIME 550.0e-6 // 550 usec pulse
647 #define BOSE_1_PAUSE_TIME 1425.0e-6 // 1425 usec pause
648 #define BOSE_0_PAUSE_TIME 437.0e-6 // 437 usec pause
649 #define BOSE_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms???
650 #define BOSE_ADDRESS_OFFSET 0 // skip 0 bits
651 #define BOSE_ADDRESS_LEN 0 // read 16 address bits
652 #define BOSE_COMMAND_OFFSET 0 // skip 16 bits (8 address + 8 /address)
653 #define BOSE_COMMAND_LEN 16 // read 16 bits (8 command + 8 /command)
654 #define BOSE_COMPLETE_DATA_LEN 16 // complete length
655 #define BOSE_STOP_BIT 1 // has stop bit
656 #define BOSE_LSB 1 // LSB...MSB
657 #define BOSE_FLAGS 0 // flags
658
659 /*---------------------------------------------------------------------------------------------------------------------------------------------------
660 * A1TVBOX:
661 * In reality A1 TV Box has no start bit with 300/340 usec. There are 2 start bits "10" with 250us pulse + 150us pause + 150us pause + 250us pulse
662 * This is not very easy to detect, because 1st and 2nd pause of both start bits are closely spaced.
663 * So IRMP looks for pseudo start bit with 300/340 usec and ignores the second half of the 2nd bit (250us pulse)
664 * This method only works because the first data bit (which is the 3rd bit) following is always "1":
665 * IRMP treats the first "long" pulse (250us of 2nd start bit + 250us of 1st data bit) of this "1" as a first _short_ pulse.
666 * This is a bug in IRMP's manchester decoder, but a good feature here ;-)
667 *---------------------------------------------------------------------------------------------------------------------------------------------------
668 */
669 #define A1TVBOX_START_BIT_PULSE_TIME 300.0e-6 // 300 usec pulse
670 #define A1TVBOX_START_BIT_PAUSE_TIME 340.0e-6 // 340 usec pause
671 #define A1TVBOX_BIT_PULSE_TIME 250.0e-6 // 250 usec pulse
672 #define A1TVBOX_BIT_PAUSE_TIME 150.0e-6 // 150 usec pulse
673 #define A1TVBOX_STOP_BIT 0 // has no stop bit
674 #define A1TVBOX_LSB 0 // MSB...LSB
675 #define A1TVBOX_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1 ) // flags
676 #define A1TVBOX_FRAMES 1 // A1TVBOX sends each frame 1 times
677 #define A1TVBOX_ADDRESS_OFFSET 1 // skip 1 bits
678 #define A1TVBOX_ADDRESS_LEN 8 // read 8 address bits
679 #define A1TVBOX_COMMAND_OFFSET 9 // skip 9 bits (start bit + address)
680 #define A1TVBOX_COMMAND_LEN 8 // read 8 command bits
681 #define A1TVBOX_COMPLETE_DATA_LEN 17 // complete length incl. start bit
682 #define A1TVBOX_FRAME_REPEAT_PAUSE_TIME 50.0e-3 // 50 msec pause between frames, don't know if it is correct
683
684 /*---------------------------------------------------------------------------------------------------------------------------------------------------
685 * MERLIN:
686 * See notes for A1TVBOX
687 *---------------------------------------------------------------------------------------------------------------------------------------------------
688 */
689 #define MERLIN_START_BIT_PULSE_TIME 210.0e-6 // 300 usec pulse
690 #define MERLIN_START_BIT_PAUSE_TIME 420.0e-6 // 340 usec pause
691 #define MERLIN_BIT_PULSE_TIME 210.0e-6 // 250 usec pulse
692 #define MERLIN_BIT_PAUSE_TIME 210.0e-6 // 150 usec pulse
693 #define MERLIN_STOP_BIT 0 // has no stop bit
694 #define MERLIN_LSB 0 // MSB...LSB
695 #define MERLIN_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1 ) // flags
696 #define MERLIN_FRAMES 1 // MERLIN sends each frame 1 times
697 #define MERLIN_ADDRESS_OFFSET 1 // skip 1 bits
698 #define MERLIN_ADDRESS_LEN 8 // read 8 address bits
699 #define MERLIN_COMMAND_OFFSET 8 // skip 9 bits (start bit + address)
700 #define MERLIN_COMMAND_LEN 10 // read 8 command bits
701 #define MERLIN_COMPLETE_DATA_LEN 19 // complete length incl. start bit
702 #define MERLIN_FRAME_REPEAT_PAUSE_TIME 50.0e-3 // 50 msec pause between frames, don't know if it is correct
703
704 /*---------------------------------------------------------------------------------------------------------------------------------------------------
705 * ORTEK (Hama): 6 address bits + 2 frame type bits + 6 command bits + 1 parity bit + 1 unknown bit + "1" + "0"
706 *---------------------------------------------------------------------------------------------------------------------------------------------------
707 */
708 #define ORTEK_START_BIT_PULSE_TIME 2000.0e-6 // 2000 usec pulse
709 #define ORTEK_START_BIT_PAUSE_TIME 1000.0e-6 // 1000 usec pause
710 #define ORTEK_BIT_TIME 500.0e-6 // 500 usec pulse/pause
711 #define ORTEK_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
712 #define ORTEK_ADDRESS_OFFSET 0 // skip 0 bits
713 #define ORTEK_ADDRESS_LEN 8 // read 6 address bits + 2 special bits
714 #define ORTEK_COMMAND_OFFSET 8 // skip 6 address bits + 2 special bits
715 #define ORTEK_COMMAND_LEN 6 // read 6 command bits
716 #define ORTEK_COMPLETE_DATA_LEN 18 // complete length
717 #define ORTEK_STOP_BIT 0 // has no stop bit
718 #define ORTEK_LSB 0 // MSB...LSB
719 #define ORTEK_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags
720
721 /*---------------------------------------------------------------------------------------------------------------------------------------------------
722 * TELEFUNKEN:
723 *---------------------------------------------------------------------------------------------------------------------------------------------------
724 */
725 #define TELEFUNKEN_START_BIT_PULSE_TIME 600.0e-6 // 600 usec pulse
726 #define TELEFUNKEN_START_BIT_PAUSE_TIME 1500.0e-6 // 1500 usec pause
727 #define TELEFUNKEN_PULSE_TIME 600.0e-6 // 600 usec pulse
728 #define TELEFUNKEN_1_PAUSE_TIME 1500.0e-6 // 1500 usec pause
729 #define TELEFUNKEN_0_PAUSE_TIME 600.0e-6 // 600 usec pause
730 #define TELEFUNKEN_FRAME_REPEAT_PAUSE_TIME 22.0e-3 // frame repeat after XX ms ?????
731 #define TELEFUNKEN_ADDRESS_OFFSET 0 // skip 0 bits
732 #define TELEFUNKEN_ADDRESS_LEN 0 // read 0 address bits
733 #define TELEFUNKEN_COMMAND_OFFSET 0 // skip 0 bits
734 #define TELEFUNKEN_COMMAND_LEN 15 // read 15 bits
735 #define TELEFUNKEN_COMPLETE_DATA_LEN 15 // complete length
736 #define TELEFUNKEN_STOP_BIT 1 // has stop bit
737 #define TELEFUNKEN_LSB 0 // LSB...MSB
738 #define TELEFUNKEN_FLAGS 0 // flags
739
740 /*---------------------------------------------------------------------------------------------------------------------------------------------------
741 * ROOMBA
742 *---------------------------------------------------------------------------------------------------------------------------------------------------
743 */
744 #define ROOMBA_START_BIT_PULSE_TIME 2790.0e-6 // 2790 usec pulse
745 #define ROOMBA_START_BIT_PAUSE_TIME 930.0e-6 // 930 usec pause
746 #define ROOMBA_0_PULSE_TIME 930.0e-6 // 930 usec pulse
747 #define ROOMBA_1_PULSE_TIME 2790.0e-6 // 2790 usec pulse
748 #define ROOMBA_0_PAUSE_TIME 2790.0e-6 // 2790 usec pause
749 #define ROOMBA_1_PAUSE_TIME 930.0e-6 // 930 usec pause
750 #define ROOMBA_FRAME_REPEAT_PAUSE_TIME 18.0e-3 // frame repeat after 18ms
751 #define ROOMBA_ADDRESS_OFFSET 0 // skip 0 bits
752 #define ROOMBA_ADDRESS_LEN 0 // read 0 address bits
753 #define ROOMBA_COMMAND_OFFSET 0 // skip 0 bits
754 #define ROOMBA_COMMAND_LEN 7 // read 7 bits
755 #define ROOMBA_COMPLETE_DATA_LEN 7 // complete length
756 #define ROOMBA_STOP_BIT 0 // has stop bit
757 #define ROOMBA_LSB 0 // MSB...LSB
758 #define ROOMBA_FLAGS 0 // flags
759 #define ROOMBA_FRAMES 8 // ROOMBA sends 8 frames (this is a lie, but more comfortable)
760
761 /*---------------------------------------------------------------------------------------------------------------------------------------------------
762 * RC-MM (32, 24, or 12 bit)
763 *---------------------------------------------------------------------------------------------------------------------------------------------------
764 */
765 #define RCMM32_START_BIT_PULSE_TIME 500.0e-6 // 500 usec pulse
766 #define RCMM32_START_BIT_PAUSE_TIME 220.0e-6 // 220 usec pause
767 #define RCMM32_PULSE_TIME 230.0e-6 // 230 usec pulse
768 #define RCMM32_00_PAUSE_TIME 220.0e-6 // 220 usec pause
769 #define RCMM32_01_PAUSE_TIME 370.0e-6 // 370 usec pause
770 #define RCMM32_10_PAUSE_TIME 540.0e-6 // 540 usec pause
771 #define RCMM32_11_PAUSE_TIME 720.0e-6 // 720 usec pause
772
773 #define RCMM32_FRAME_REPEAT_PAUSE_TIME 80.0e-3 // frame repeat after 80 ms
774 #define RCMM32_ADDRESS_OFFSET 0 // skip 0 bits
775 #define RCMM32_ADDRESS_LEN 16 // read 16 address bits
776 #define RCMM32_COMMAND_OFFSET 17 // skip 17 bits
777 #define RCMM32_COMMAND_LEN 15 // read 15 bits
778 #define RCMM32_COMPLETE_DATA_LEN 32 // complete length
779 #define RCMM32_STOP_BIT 1 // has stop bit
780 #define RCMM32_LSB 0 // LSB...MSB
781 #define RCMM32_FLAGS 0 // flags
782
783 /*---------------------------------------------------------------------------------------------------------------------------------------------------
784 * RADIO1 - e.g. Tevion
785 *---------------------------------------------------------------------------------------------------------------------------------------------------
786 */
787 #define RADIO1_START_BIT_PULSE_TIME 3000.0e-6 // 3000 usec pulse
788 #define RADIO1_START_BIT_PAUSE_TIME 7000.0e-6 // 7000 usec pulse
789 #define RADIO1_0_PULSE_TIME 500.0e-6 // 500 usec pulse
790 #define RADIO1_0_PAUSE_TIME 1000.0e-6 // 1000 usec pause
791 #define RADIO1_1_PULSE_TIME 1000.0e-6 // 1000 usec pulse
792 #define RADIO1_1_PAUSE_TIME 500.0e-6 // 500 usec pause
793
794 #define RADIO1_FRAME_REPEAT_PAUSE_TIME 25.0e-3 // frame repeat after 25ms
795 #define RADIO1_ADDRESS_OFFSET 4 // skip 4 bits
796 #define RADIO1_ADDRESS_LEN 16 // read 16 address bits
797 #define RADIO1_COMMAND_OFFSET 20 // skip 4 + 16 bits
798 #define RADIO1_COMMAND_LEN 3 // read 3 command bits
799 #define RADIO1_COMPLETE_DATA_LEN 23 // complete length
800 #define RADIO1_STOP_BIT 1 // has stop bit
801 #define RADIO1_LSB 1 // LSB...MSB?
802 #define RADIO1_FLAGS 0 // flags
803
804 /*---------------------------------------------------------------------------------------------------------------------------------------------------
805 * Frame Repetitions:
806 *---------------------------------------------------------------------------------------------------------------------------------------------------
807 */
808 #define AUTO_FRAME_REPETITION_TIME 80.0e-3 // SIRCS/SAMSUNG32/NUBERT: automatic repetition after 25-50ms
809
810 #endif // _IRMP_PROTOCOLS_H_