]>
cloudbase.mooo.com Git - irmp.git/blob - irmpconfig.h
1 /*---------------------------------------------------------------------------------------------------------------------------------------------------
4 * Copyright (c) 2009-2011 Frank Meyer - frank(at)fli4l.de
6 * $Id: irmpconfig.h,v 1.83 2012/02/24 15:00:18 fm Exp $
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
14 *---------------------------------------------------------------------------------------------------------------------------------------------------
17 #ifndef _IRMPCONFIG_H_
18 #define _IRMPCONFIG_H_
20 /*---------------------------------------------------------------------------------------------------------------------------------------------------
21 * Change F_INTERRUPTS if you change the number of interrupts per second,
22 * Normally, F_INTERRUPTS should be in the range from 10000 to 15000, typical is 15000
23 * A value above 15000 costs additional program space, absolute maximum value is 20000.
24 *---------------------------------------------------------------------------------------------------------------------------------------------------
27 #define F_INTERRUPTS 15000 // interrupts per second, min: 10000, max: 20000, typ: 15000
30 /*---------------------------------------------------------------------------------------------------------------------------------------------------
31 * Change settings from 1 to 0 if you want to disable one or more decoders.
32 * This saves program space.
37 * The standard decoders are enabled per default.
38 * Less common protocols are disabled here, you need to enable them manually.
40 * If you want to use FDC or RCCAR simultaneous with RC5 protocol, additional program space is required.
41 * If you don't need RC5 when using FDC/RCCAR, you should disable RC5.
42 *---------------------------------------------------------------------------------------------------------------------------------------------------
45 // typical protocols, disable here! Enable Remarks F_INTERRUPTS Program Space
46 #define IRMP_SUPPORT_SIRCS_PROTOCOL 1 // Sony SIRCS >= 10000 ~150 bytes
47 #define IRMP_SUPPORT_NEC_PROTOCOL 1 // NEC + APPLE >= 10000 ~300 bytes
48 #define IRMP_SUPPORT_SAMSUNG_PROTOCOL 1 // Samsung + Samsung32 >= 10000 ~300 bytes
49 #define IRMP_SUPPORT_MATSUSHITA_PROTOCOL 1 // Matsushita >= 10000 ~50 bytes
50 #define IRMP_SUPPORT_KASEIKYO_PROTOCOL 1 // Kaseikyo >= 10000 ~250 bytes
51 #define IRMP_SUPPORT_DENON_PROTOCOL 1 // DENON, Sharp >= 10000 ~250 bytes
53 // more protocols, enable here! Enable Remarks F_INTERRUPTS Program Space
54 #define IRMP_SUPPORT_RC5_PROTOCOL 0 // RC5 >= 10000 ~250 bytes
55 #define IRMP_SUPPORT_RC6_PROTOCOL 0 // RC6 & RC6A >= 10000 ~250 bytes
56 #define IRMP_SUPPORT_JVC_PROTOCOL 0 // JVC >= 10000 ~150 bytes
57 #define IRMP_SUPPORT_NEC16_PROTOCOL 0 // NEC16 >= 10000 ~100 bytes
58 #define IRMP_SUPPORT_NEC42_PROTOCOL 0 // NEC42 >= 10000 ~300 bytes
59 #define IRMP_SUPPORT_IR60_PROTOCOL 1 // IR60 (SDA2008) >= 10000 ~300 bytes
60 #define IRMP_SUPPORT_GRUNDIG_PROTOCOL 0 // Grundig >= 10000 ~300 bytes
61 #define IRMP_SUPPORT_SIEMENS_PROTOCOL 0 // Siemens Gigaset >= 15000 ~550 bytes
62 #define IRMP_SUPPORT_NOKIA_PROTOCOL 0 // Nokia >= 10000 ~300 bytes
64 // exotic protocols, enable here! Enable Remarks F_INTERRUPTS Program Space
65 #define IRMP_SUPPORT_KATHREIN_PROTOCOL 0 // Kathrein >= 10000 ~200 bytes
66 #define IRMP_SUPPORT_NUBERT_PROTOCOL 0 // NUBERT >= 10000 ~50 bytes
67 #define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL 0 // Bang & Olufsen >= 10000 ~200 bytes
68 #define IRMP_SUPPORT_RECS80_PROTOCOL 0 // RECS80 (SAA3004) >= 15000 ~50 bytes
69 #define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0 // RECS80EXT (SAA3008) >= 15000 ~50 bytes
70 #define IRMP_SUPPORT_THOMSON_PROTOCOL 0 // Thomson >= 10000 ~250 bytes
71 #define IRMP_SUPPORT_NIKON_PROTOCOL 0 // NIKON camera >= 10000 ~250 bytes
72 #define IRMP_SUPPORT_NETBOX_PROTOCOL 0 // Netbox keyboard >= 10000 ~400 bytes (PROTOTYPE!)
73 #define IRMP_SUPPORT_FDC_PROTOCOL 0 // FDC3402 keyboard >= 10000 (better 15000) ~150 bytes (~400 in combination with RC5)
74 #define IRMP_SUPPORT_RCCAR_PROTOCOL 0 // RC Car >= 10000 (better 15000) ~150 bytes (~500 in combination with RC5)
75 #define IRMP_SUPPORT_RUWIDO_PROTOCOL 0 // RUWIDO, T-Home >= 15000 ~550 bytes
76 #define IRMP_SUPPORT_LEGO_PROTOCOL 0 // LEGO Power RC >= 20000 ~150 bytes
78 /*---------------------------------------------------------------------------------------------------------------------------------------------------
79 * Change hardware pin here:
80 *---------------------------------------------------------------------------------------------------------------------------------------------------
82 #if defined (PIC_C18) // Microchip C18 Compiler
83 #include <p18cxxx.h> // main PIC18 h file
84 #define IRMP_PIN PORTBbits.RB4 // use RB4 as IR input on PIC
87 #elif defined (PIC_CCS_COMPILER) // PIC CCS Compiler:
88 #define IRMP_PIN PIN_B4 // use PB4 as IR input on PIC
91 #define IRMP_PORT PORTB
94 #define IRMP_BIT 6 // use PB6 as IR input on AVR
95 #define input(x) ((x) & (1 << IRMP_BIT))
98 /*---------------------------------------------------------------------------------------------------------------------------------------------------
99 * Set IRMP_LOGGING to 1 if want to log data to UART with 9600Bd
100 *---------------------------------------------------------------------------------------------------------------------------------------------------
103 #define IRMP_LOGGING 0 // 1: log IR signal (scan), 0: do not (default)
106 /*---------------------------------------------------------------------------------------------------------------------------------------------------
107 * Use external logging routines
108 * If you enable external logging, you have also to enable IRMP_LOGGING above
109 *---------------------------------------------------------------------------------------------------------------------------------------------------
111 #ifndef IRMP_EXT_LOGGING
112 #define IRMP_EXT_LOGGING 0 // 1:log, 0: do not log ;
115 /*---------------------------------------------------------------------------------------------------------------------------------------------------
116 * Set IRMP_PROTOCOL_NAMES to 1 if want to access protocol names (for logging etc), costs ~300 bytes RAM!
117 *---------------------------------------------------------------------------------------------------------------------------------------------------
119 #define IRMP_PROTOCOL_NAMES 0 // 1: access protocol names, 0: do not (default),
121 /*---------------------------------------------------------------------------------------------------------------------------------------------------
122 * Use Callbacks to indicate input signal
123 *---------------------------------------------------------------------------------------------------------------------------------------------------
125 #define IRMP_USE_CALLBACK 0 // flag: 0 = don't use callbacks, 1 = use callbacks, default is 0
127 /*---------------------------------------------------------------------------------------------------------------------------------------------------
128 * DO NOT CHANGE THE FOLLOWING LINES !
129 *---------------------------------------------------------------------------------------------------------------------------------------------------
131 #if IRMP_SUPPORT_SIEMENS_PROTOCOL == 1 && F_INTERRUPTS < 15000
132 # warning F_INTERRUPTS too low, SIEMENS protocol disabled (should be at least 15000)
133 # undef IRMP_SUPPORT_SIEMENS_PROTOCOL
134 # define IRMP_SUPPORT_SIEMENS_PROTOCOL 0
137 #if IRMP_SUPPORT_RUWIDO_PROTOCOL == 1 && F_INTERRUPTS < 15000
138 # warning F_INTERRUPTS too low, RUWIDO protocol disabled (should be at least 15000)
139 # undef IRMP_SUPPORT_RUWIDO_PROTOCOL
140 # define IRMP_SUPPORT_RUWIDO_PROTOCOL 0
143 #if IRMP_SUPPORT_RECS80_PROTOCOL == 1 && F_INTERRUPTS < 15000
144 # warning F_INTERRUPTS too low, RECS80 protocol disabled (should be at least 15000)
145 # undef IRMP_SUPPORT_RECS80_PROTOCOL
146 # define IRMP_SUPPORT_RECS80_PROTOCOL 0
149 #if IRMP_SUPPORT_RECS80EXT_PROTOCOL == 1 && F_INTERRUPTS < 15000
150 # warning F_INTERRUPTS too low, RECS80EXT protocol disabled (should be at least 15000)
151 # undef IRMP_SUPPORT_RECS80EXT_PROTOCOL
152 # define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0
155 #if IRMP_SUPPORT_LEGO_PROTOCOL == 1 && F_INTERRUPTS < 20000
156 # warning F_INTERRUPTS too low, LEGO protocol disabled (should be at least 20000)
157 # undef IRMP_SUPPORT_LEGO_PROTOCOL
158 # define IRMP_SUPPORT_LEGO_PROTOCOL 0
161 #if IRMP_SUPPORT_JVC_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0
162 # warning JVC protocol needs also NEC protocol, NEC protocol enabled
163 # undef IRMP_SUPPORT_NEC_PROTOCOL
164 # define IRMP_SUPPORT_NEC_PROTOCOL 1
167 #if IRMP_SUPPORT_NEC16_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0
168 # warning NEC16 protocol needs also NEC protocol, NEC protocol enabled
169 # undef IRMP_SUPPORT_NEC_PROTOCOL
170 # define IRMP_SUPPORT_NEC_PROTOCOL 1
173 #if IRMP_SUPPORT_NEC42_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0
174 # warning NEC42 protocol needs also NEC protocol, NEC protocol enabled
175 # undef IRMP_SUPPORT_NEC_PROTOCOL
176 # define IRMP_SUPPORT_NEC_PROTOCOL 1
179 #if F_INTERRUPTS > 20000
180 #error F_INTERRUPTS too high (should be not greater than 20000)
183 #endif /* _WC_IRMPCONFIG_H_ */