]>
cloudbase.mooo.com Git - irmp.git/blob - irmpprotocols.h
1 /*---------------------------------------------------------------------------------------------------------------------------------------------------
2 * irmpprotocols.h - irmp protocols
4 * DO NOT INCLUDE THIS FILE, WILL BE INCLUDED BY IRMP.H or IRSND.H!
6 * Copyright (c) 2013-2015 Frank Meyer - frank(at)fli4l.de
8 * $Id: irmpprotocols.h,v 1.38 2015/09/20 10:51:37 fm Exp $
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
14 *---------------------------------------------------------------------------------------------------------------------------------------------------
17 #ifndef _IRMP_PROTOCOLS_H_
18 #define _IRMP_PROTOCOLS_H_
20 #if !defined(_IRMP_H_) && !defined(_IRSND_H_)
21 # error please include only irmp.h or irsnd.h, not irmpprotocols.h
24 /*---------------------------------------------------------------------------------------------------------------------------------------------------
26 *---------------------------------------------------------------------------------------------------------------------------------------------------
28 #define IRMP_SIRCS_PROTOCOL 1 // Sony
29 #define IRMP_NEC_PROTOCOL 2 // NEC, Pioneer, JVC, Toshiba, NoName etc.
30 #define IRMP_SAMSUNG_PROTOCOL 3 // Samsung
31 #define IRMP_MATSUSHITA_PROTOCOL 4 // Matsushita
32 #define IRMP_KASEIKYO_PROTOCOL 5 // Kaseikyo (Panasonic etc)
33 #define IRMP_RECS80_PROTOCOL 6 // Philips, Thomson, Nordmende, Telefunken, Saba
34 #define IRMP_RC5_PROTOCOL 7 // Philips etc
35 #define IRMP_DENON_PROTOCOL 8 // Denon, Sharp
36 #define IRMP_RC6_PROTOCOL 9 // Philips etc
37 #define IRMP_SAMSUNG32_PROTOCOL 10 // Samsung32: no sync pulse at bit 16, length 32 instead of 37
38 #define IRMP_APPLE_PROTOCOL 11 // Apple, very similar to NEC
39 #define IRMP_RECS80EXT_PROTOCOL 12 // Philips, Technisat, Thomson, Nordmende, Telefunken, Saba
40 #define IRMP_NUBERT_PROTOCOL 13 // Nubert
41 #define IRMP_BANG_OLUFSEN_PROTOCOL 14 // Bang & Olufsen
42 #define IRMP_GRUNDIG_PROTOCOL 15 // Grundig
43 #define IRMP_NOKIA_PROTOCOL 16 // Nokia
44 #define IRMP_SIEMENS_PROTOCOL 17 // Siemens, e.g. Gigaset
45 #define IRMP_FDC_PROTOCOL 18 // FDC keyboard
46 #define IRMP_RCCAR_PROTOCOL 19 // RC Car
47 #define IRMP_JVC_PROTOCOL 20 // JVC (NEC with 16 bits)
48 #define IRMP_RC6A_PROTOCOL 21 // RC6A, e.g. Kathrein, XBOX
49 #define IRMP_NIKON_PROTOCOL 22 // Nikon
50 #define IRMP_RUWIDO_PROTOCOL 23 // Ruwido, e.g. T-Home Mediareceiver
51 #define IRMP_IR60_PROTOCOL 24 // IR60 (SDA2008)
52 #define IRMP_KATHREIN_PROTOCOL 25 // Kathrein
53 #define IRMP_NETBOX_PROTOCOL 26 // Netbox keyboard (bitserial)
54 #define IRMP_NEC16_PROTOCOL 27 // NEC with 16 bits (incl. sync)
55 #define IRMP_NEC42_PROTOCOL 28 // NEC with 42 bits
56 #define IRMP_LEGO_PROTOCOL 29 // LEGO Power Functions RC
57 #define IRMP_THOMSON_PROTOCOL 30 // Thomson
58 #define IRMP_BOSE_PROTOCOL 31 // BOSE
59 #define IRMP_A1TVBOX_PROTOCOL 32 // A1 TV Box
60 #define IRMP_ORTEK_PROTOCOL 33 // ORTEK - Hama
61 #define IRMP_TELEFUNKEN_PROTOCOL 34 // Telefunken (1560)
62 #define IRMP_ROOMBA_PROTOCOL 35 // iRobot Roomba vacuum cleaner
63 #define IRMP_RCMM32_PROTOCOL 36 // Fujitsu-Siemens (Activy remote control)
64 #define IRMP_RCMM24_PROTOCOL 37 // Fujitsu-Siemens (Activy keyboard)
65 #define IRMP_RCMM12_PROTOCOL 38 // Fujitsu-Siemens (Activy keyboard)
66 #define IRMP_SPEAKER_PROTOCOL 39 // Another loudspeaker protocol, similar to Nubert
67 #define IRMP_LGAIR_PROTOCOL 40 // LG air conditioner
68 #define IRMP_SAMSUNG48_PROTOCOL 41 // air conditioner with SAMSUNG protocol (48 bits)
69 #define IRMP_MERLIN_PROTOCOL 42 // Merlin (Pollin 620 185)
70 #define IRMP_PENTAX_PROTOCOL 43 // Pentax camera
71 #define IRMP_FAN_PROTOCOL 44 // FAN (ventilator), very similar to NUBERT, but last bit is data bit instead of stop bit
72 #define IRMP_S100_PROTOCOL 45 // very similar to RC5, but 14 instead of 13 data bits
73 #define IRMP_ACP24_PROTOCOL 46 // Stiebel Eltron ACP24 air conditioner
74 #define IRMP_TECHNICS_PROTOCOL 47 // Technics, similar to Matsushita, but 22 instead of 24 bits
75 #define IRMP_RADIO1_PROTOCOL 48 // Radio protocol (experimental status), do not use it yet!
77 #define IRMP_N_PROTOCOLS 48 // number of supported protocols
79 /*---------------------------------------------------------------------------------------------------------------------------------------------------
81 *---------------------------------------------------------------------------------------------------------------------------------------------------
83 // fm 22.09.2011: may not be more than 16000L, otherwise some JVC codes will not be accepted
84 #define IRMP_TIMEOUT_TIME 15500.0e-6 // timeout after 15.5 ms darkness
85 #define IRMP_TIMEOUT_TIME_MS 15500L // timeout after 15.5 ms darkness
87 #if IRMP_SUPPORT_NIKON_PROTOCOL == 1
88 # define IRMP_TIMEOUT_NIKON_TIME 29500.0e-6 // 2nd timeout after 29.5 ms darkness (only for NIKON!)
89 # define IRMP_TIMEOUT_NIKON_TIME_MS 29500L // 2nd timeout after 29.5 ms darkness
90 typedef uint16_t PAUSE_LEN
;
91 # define IRMP_TIMEOUT_NIKON_LEN (PAUSE_LEN)(F_INTERRUPTS * IRMP_TIMEOUT_NIKON_TIME + 0.5)
93 # if (F_INTERRUPTS * IRMP_TIMEOUT_TIME_MS) / 1000000 >= 254
94 typedef uint16_t PAUSE_LEN
;
96 typedef uint8_t PAUSE_LEN
;
100 #define IRMP_TIMEOUT_LEN (PAUSE_LEN)(F_INTERRUPTS * IRMP_TIMEOUT_TIME + 0.5)
102 /*---------------------------------------------------------------------------------------------------------------------------------------------------
103 * flags of struct IRMP_PARAMETER:
104 *---------------------------------------------------------------------------------------------------------------------------------------------------
106 #define IRMP_PARAM_FLAG_IS_MANCHESTER 0x01
107 #define IRMP_PARAM_FLAG_1ST_PULSE_IS_1 0x02
108 #define IRMP_PARAM_FLAG_IS_SERIAL 0x04
110 /*---------------------------------------------------------------------------------------------------------------------------------------------------
112 *---------------------------------------------------------------------------------------------------------------------------------------------------
114 #define SIRCS_START_BIT_PULSE_TIME 2400.0e-6 // 2400 usec pulse
115 #define SIRCS_START_BIT_PAUSE_TIME 600.0e-6 // 600 usec pause
116 #define SIRCS_1_PULSE_TIME 1200.0e-6 // 1200 usec pulse
117 #define SIRCS_0_PULSE_TIME 600.0e-6 // 600 usec pulse
118 #define SIRCS_PAUSE_TIME 600.0e-6 // 600 usec pause
119 #define SIRCS_FRAMES 3 // SIRCS sends each frame 3 times
120 #define SIRCS_AUTO_REPETITION_PAUSE_TIME 25.0e-3 // auto repetition after 25ms
121 #define SIRCS_FRAME_REPEAT_PAUSE_TIME 25.0e-3 // frame repeat after 25ms
122 #define SIRCS_ADDRESS_OFFSET 15 // skip 15 bits
123 #define SIRCS_ADDRESS_LEN 5 // read up to 5 address bits
124 #define SIRCS_COMMAND_OFFSET 0 // skip 0 bits
125 #define SIRCS_COMMAND_LEN 15 // read 12-15 command bits
126 #define SIRCS_MINIMUM_DATA_LEN 12 // minimum data length
127 #define SIRCS_COMPLETE_DATA_LEN 20 // complete length - may be up to 20
128 #define SIRCS_STOP_BIT 0 // has no stop bit
129 #define SIRCS_LSB 1 // LSB...MSB
130 #define SIRCS_FLAGS 0 // flags
132 /*---------------------------------------------------------------------------------------------------------------------------------------------------
133 * NEC & NEC42 & NEC16 & LGAIR:
134 *---------------------------------------------------------------------------------------------------------------------------------------------------
136 #define NEC_START_BIT_PULSE_TIME 9000.0e-6 // 9000 usec pulse
137 #define NEC_START_BIT_PAUSE_TIME 4500.0e-6 // 4500 usec pause
138 #define NEC_REPEAT_START_BIT_PAUSE_TIME 2250.0e-6 // 2250 usec pause
139 #define NEC_PULSE_TIME 560.0e-6 // 560 usec pulse
140 #define NEC_1_PAUSE_TIME 1690.0e-6 // 1690 usec pause
141 #define NEC_0_PAUSE_TIME 560.0e-6 // 560 usec pause
142 #define NEC_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms
143 #define NEC_ADDRESS_OFFSET 0 // skip 0 bits
144 #define NEC_ADDRESS_LEN 16 // read 16 address bits
145 #define NEC_COMMAND_OFFSET 16 // skip 16 bits (8 address + 8 /address)
146 #define NEC_COMMAND_LEN 16 // read 16 bits (8 command + 8 /command)
147 #define NEC_COMPLETE_DATA_LEN 32 // complete length
148 #define NEC_STOP_BIT 1 // has stop bit
149 #define NEC_LSB 1 // LSB...MSB
150 #define NEC_FLAGS 0 // flags
152 #define NEC42_ADDRESS_OFFSET 0 // skip 0 bits
153 #define NEC42_ADDRESS_LEN 13 // read 13 address bits
154 #define NEC42_COMMAND_OFFSET 26 // skip 26 bits (2 x 13 address bits)
155 #define NEC42_COMMAND_LEN 8 // read 8 command bits
156 #define NEC42_COMPLETE_DATA_LEN 42 // complete length (2 x 13 + 2 x 8)
158 #define LGAIR_ADDRESS_OFFSET 0 // skip 0 bits
159 #define LGAIR_ADDRESS_LEN 8 // read 8 address bits
160 #define LGAIR_COMMAND_OFFSET 8 // skip 8 bits (8 address)
161 #define LGAIR_COMMAND_LEN 16 // read 16 bits (16 command)
162 #define LGAIR_COMPLETE_DATA_LEN 28 // complete length (8 address + 16 command + 4 checksum)
164 #define NEC16_ADDRESS_OFFSET 0 // skip 0 bits
165 #define NEC16_ADDRESS_LEN 8 // read 8 address bits
166 #define NEC16_COMMAND_OFFSET 8 // skip 8 bits (8 address)
167 #define NEC16_COMMAND_LEN 8 // read 8 bits (8 command)
168 #define NEC16_COMPLETE_DATA_LEN 16 // complete length
170 /*---------------------------------------------------------------------------------------------------------------------------------------------------
171 * SAMSUNG & SAMSUNG32 & SAMSUNG48:
172 *---------------------------------------------------------------------------------------------------------------------------------------------------
174 #define SAMSUNG_START_BIT_PULSE_TIME 4500.0e-6 // 4500 usec pulse
175 #define SAMSUNG_START_BIT_PAUSE_TIME 4500.0e-6 // 4500 usec pause
176 #define SAMSUNG_PULSE_TIME 550.0e-6 // 550 usec pulse
177 #define SAMSUNG_1_PAUSE_TIME 1500.0e-6 // 1550 usec pause
178 #define SAMSUNG_0_PAUSE_TIME 500.0e-6 // 500 usec pause
180 #define SAMSUNG_FRAME_REPEAT_PAUSE_TIME 25.0e-3 // frame repeat after 25ms
181 #define SAMSUNG_ADDRESS_OFFSET 0 // skip 0 bits
182 #define SAMSUNG_ADDRESS_LEN 16 // read 16 address bits
183 #define SAMSUNG_ID_OFFSET 17 // skip 16 + 1 sync bit
184 #define SAMSUNG_ID_LEN 4 // read 4 id bits
185 #define SAMSUNG_COMMAND_OFFSET 21 // skip 16 + 1 sync + 4 data bits
186 #define SAMSUNG_COMMAND_LEN 16 // read 16 command bits
187 #define SAMSUNG_COMPLETE_DATA_LEN 37 // complete length
188 #define SAMSUNG_STOP_BIT 1 // has stop bit
189 #define SAMSUNG_LSB 1 // LSB...MSB?
190 #define SAMSUNG_FLAGS 0 // flags
192 #define SAMSUNG32_COMMAND_OFFSET 16 // skip 16 bits
193 #define SAMSUNG32_COMMAND_LEN 16 // read 16 command bits
194 #define SAMSUNG32_COMPLETE_DATA_LEN 32 // complete length
195 #define SAMSUNG32_FRAMES 2 // SAMSUNG32 sends each frame 2 times // fm: correct?
196 #define SAMSUNG32_AUTO_REPETITION_PAUSE_TIME 47.0e-3 // repetition after 47 ms
197 #define SAMSUNG32_FRAME_REPEAT_PAUSE_TIME 47.0e-3 // frame repeat after 47ms
199 #define SAMSUNG48_COMMAND_OFFSET 16 // skip 16 bits
200 #define SAMSUNG48_COMMAND_LEN 32 // read 32 command bits
201 #define SAMSUNG48_COMPLETE_DATA_LEN 48 // complete length
202 #define SAMSUNG48_FRAMES 2 // SAMSUNG48 sends each frame 2 times
203 #define SAMSUNG48_AUTO_REPETITION_PAUSE_TIME 5.0e-3 // repetition after 5 ms
204 #define SAMSUNG48_FRAME_REPEAT_PAUSE_TIME 47.0e-3 // frame repeat after 47ms
206 /*---------------------------------------------------------------------------------------------------------------------------------------------------
208 *---------------------------------------------------------------------------------------------------------------------------------------------------
210 #define MATSUSHITA_START_BIT_PULSE_TIME 3488.0e-6 // 3488 usec pulse
211 #define MATSUSHITA_START_BIT_PAUSE_TIME 3488.0e-6 // 3488 usec pause
212 #define MATSUSHITA_PULSE_TIME 872.0e-6 // 872 usec pulse
213 #define MATSUSHITA_1_PAUSE_TIME 2616.0e-6 // 2616 usec pause
214 #define MATSUSHITA_0_PAUSE_TIME 872.0e-6 // 872 usec pause
215 #define MATSUSHITA_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms
216 #define MATSUSHITA_ADDRESS_OFFSET 12 // skip 12 bits
217 #define MATSUSHITA_ADDRESS_LEN 12 // read 12 address bits
218 #define MATSUSHITA_COMMAND_OFFSET 0 // skip 0 bits
219 #define MATSUSHITA_COMMAND_LEN 12 // read 12 bits (6 custom + 6 command)
220 #define MATSUSHITA_COMPLETE_DATA_LEN 24 // complete length
221 #define MATSUSHITA_STOP_BIT 1 // has stop bit
222 #define MATSUSHITA_LSB 1 // LSB...MSB?
223 #define MATSUSHITA_FLAGS 0 // flags
225 /*---------------------------------------------------------------------------------------------------------------------------------------------------
226 * TECHNICS: same timings as MATSUSHITA
227 *---------------------------------------------------------------------------------------------------------------------------------------------------
229 #define TECHNICS_ADDRESS_LEN 0 // read 0 address bits
230 #define TECHNICS_COMMAND_LEN 11 // read 11 bits
231 #define TECHNICS_COMPLETE_DATA_LEN 22 // complete length
233 /*---------------------------------------------------------------------------------------------------------------------------------------------------
235 *---------------------------------------------------------------------------------------------------------------------------------------------------
237 #define KASEIKYO_START_BIT_PULSE_TIME 3380.0e-6 // 3380 usec pulse
238 #define KASEIKYO_START_BIT_PAUSE_TIME 1690.0e-6 // 1690 usec pause
239 #define KASEIKYO_PULSE_TIME 423.0e-6 // 525 usec pulse
240 #define KASEIKYO_1_PAUSE_TIME 1269.0e-6 // 525 usec pause
241 #define KASEIKYO_0_PAUSE_TIME 423.0e-6 // 1690 usec pause
242 #define KASEIKYO_AUTO_REPETITION_PAUSE_TIME 74.0e-3 // repetition after 74 ms
243 #define KASEIKYO_FRAME_REPEAT_PAUSE_TIME 74.0e-3 // frame repeat after 74 ms
244 #define KASEIKYO_ADDRESS_OFFSET 0 // skip 0 bits
245 #define KASEIKYO_ADDRESS_LEN 16 // read 16 address bits
246 #define KASEIKYO_COMMAND_OFFSET 28 // skip 28 bits (16 manufacturer & 4 parity & 8 genre)
247 #define KASEIKYO_COMMAND_LEN 12 // read 12 command bits (10 real command & 2 id)
248 #define KASEIKYO_COMPLETE_DATA_LEN 48 // complete length
249 #define KASEIKYO_STOP_BIT 1 // has stop bit
250 #define KASEIKYO_LSB 1 // LSB...MSB?
251 #define KASEIKYO_FRAMES 2 // KASEIKYO sends 1st frame 2 times
252 #define KASEIKYO_FLAGS 0 // flags
254 /*---------------------------------------------------------------------------------------------------------------------------------------------------
256 *---------------------------------------------------------------------------------------------------------------------------------------------------
258 #define RECS80_START_BIT_PULSE_TIME 158.0e-6 // 158 usec pulse
259 #define RECS80_START_BIT_PAUSE_TIME 7432.0e-6 // 7432 usec pause
260 #define RECS80_PULSE_TIME 158.0e-6 // 158 usec pulse
261 #define RECS80_1_PAUSE_TIME 7432.0e-6 // 7432 usec pause
262 #define RECS80_0_PAUSE_TIME 4902.0e-6 // 4902 usec pause
263 #define RECS80_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
264 #define RECS80_ADDRESS_OFFSET 1 // skip 1 bit (toggle bit)
265 #define RECS80_ADDRESS_LEN 3 // read 3 address bits
266 #define RECS80_COMMAND_OFFSET 4 // skip 4 bits (1 toggle + 3 address)
267 #define RECS80_COMMAND_LEN 6 // read 6 command bits
268 #define RECS80_COMPLETE_DATA_LEN 10 // complete length
269 #define RECS80_STOP_BIT 1 // has stop bit
270 #define RECS80_LSB 0 // MSB...LSB
271 #define RECS80_FLAGS 0 // flags
273 /*---------------------------------------------------------------------------------------------------------------------------------------------------
275 *---------------------------------------------------------------------------------------------------------------------------------------------------
277 #define RC5_BIT_TIME 889.0e-6 // 889 usec pulse/pause
278 #define RC5_FRAME_REPEAT_PAUSE_TIME 88.9e-3 // frame repeat after 88.9ms
280 #define RC5_ADDRESS_OFFSET 1 // skip 1 bit (2nd start)
281 #define RC5_ADDRESS_LEN 6 // read 1 toggle bit (for key repetition detection) + 5 address bits
282 #define RC5_COMMAND_OFFSET 7 // skip 5 bits (2nd start + 1 toggle + 5 address)
283 #define RC5_COMMAND_LEN 6 // read 6 command bits
284 #define RC5_COMPLETE_DATA_LEN 13 // complete length
285 #define RC5_STOP_BIT 0 // has no stop bit
286 #define RC5_LSB 0 // MSB...LSB
287 #define RC5_FLAGS IRMP_PARAM_FLAG_IS_MANCHESTER // flags
289 /*---------------------------------------------------------------------------------------------------------------------------------------------------
290 * S100: very similar to RC5, but 14 insted of 13 bits
291 *---------------------------------------------------------------------------------------------------------------------------------------------------
293 #define S100_BIT_TIME 889.0e-6 // 889 usec pulse/pause
294 #define S100_FRAME_REPEAT_PAUSE_TIME 88.9e-3 // frame repeat after 88.9ms
296 #define S100_ADDRESS_OFFSET 1 // skip 1 bit (2nd start)
297 #define S100_ADDRESS_LEN 6 // read 1 toggle bit (for key repetition detection) + 5 address bits
298 #define S100_COMMAND_OFFSET 7 // skip 5 bits (2nd start + 1 toggle + 5 address)
299 #define S100_COMMAND_LEN 7 // read 7 command bits
300 #define S100_COMPLETE_DATA_LEN 14 // complete length
301 #define S100_STOP_BIT 0 // has no stop bit
302 #define S100_LSB 0 // MSB...LSB
303 #define S100_FLAGS IRMP_PARAM_FLAG_IS_MANCHESTER // flags
305 /*---------------------------------------------------------------------------------------------------------------------------------------------------
307 *---------------------------------------------------------------------------------------------------------------------------------------------------
309 #define DENON_PULSE_TIME 310.0e-6 // 310 usec pulse in practice, 275 in theory
310 #define DENON_1_PAUSE_TIME 1780.0e-6 // 1780 usec pause in practice, 1900 in theory
311 #define DENON_0_PAUSE_TIME 745.0e-6 // 745 usec pause in practice, 775 in theory
312 #define DENON_FRAMES 2 // DENON sends each frame 2 times
313 #define DENON_AUTO_REPETITION_PAUSE_TIME 65.0e-3 // inverted repetition after 65ms
314 #define DENON_FRAME_REPEAT_PAUSE_TIME 130.0e-3 // frame repeat after 2 * 65ms
315 #define DENON_ADDRESS_OFFSET 0 // skip 0 bits
316 #define DENON_ADDRESS_LEN 5 // read 5 address bits
317 #define DENON_COMMAND_OFFSET 5 // skip 5
318 #define DENON_COMMAND_LEN 10 // read 10 command bits
319 #define DENON_COMPLETE_DATA_LEN 15 // complete length
320 #define DENON_STOP_BIT 1 // has stop bit
321 #define DENON_LSB 0 // MSB...LSB
322 #define DENON_FLAGS 0 // flags
324 /*---------------------------------------------------------------------------------------------------------------------------------------------------
326 *---------------------------------------------------------------------------------------------------------------------------------------------------
328 #define RC6_START_BIT_PULSE_TIME 2666.0e-6 // 2.666 msec pulse
329 #define RC6_START_BIT_PAUSE_TIME 889.0e-6 // 889 usec pause
330 #define RC6_TOGGLE_BIT_TIME 889.0e-6 // 889 msec pulse/pause
331 #define RC6_BIT_TIME 444.0e-6 // 889 usec pulse/pause
332 #define RC6_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
333 #define RC6_ADDRESS_OFFSET 5 // skip "1" + 3 mode bits + 1 toggle bit
334 #define RC6_ADDRESS_LEN 8 // read 8 address bits
335 #define RC6_COMMAND_OFFSET 13 // skip 12 bits ("1" + 3 mode + 1 toggle + 8 address)
336 #define RC6_COMMAND_LEN 8 // read 8 command bits
337 #define RC6_COMPLETE_DATA_LEN_SHORT 21 // complete length
338 #define RC6_COMPLETE_DATA_LEN_LONG 36 // complete length
339 #define RC6_STOP_BIT 0 // has no stop bit
340 #define RC6_LSB 0 // MSB...LSB
341 #define RC6_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags
343 /*---------------------------------------------------------------------------------------------------------------------------------------------------
345 *---------------------------------------------------------------------------------------------------------------------------------------------------
347 #define RECS80EXT_START_BIT_PULSE_TIME 158.0e-6 // 158 usec pulse
348 #define RECS80EXT_START_BIT_PAUSE_TIME 3637.0e-6 // 3637 usec pause
349 #define RECS80EXT_PULSE_TIME 158.0e-6 // 158 usec pulse
350 #define RECS80EXT_1_PAUSE_TIME 7432.0e-6 // 7432 usec pause
351 #define RECS80EXT_0_PAUSE_TIME 4902.0e-6 // 4902 usec pause
352 #define RECS80EXT_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
353 #define RECS80EXT_ADDRESS_OFFSET 2 // skip 2 bits (2nd start + 1 toggle)
354 #define RECS80EXT_ADDRESS_LEN 4 // read 4 address bits
355 #define RECS80EXT_COMMAND_OFFSET 6 // skip 6 bits (2nd start + 1 toggle + 4 address)
356 #define RECS80EXT_COMMAND_LEN 6 // read 6 command bits
357 #define RECS80EXT_COMPLETE_DATA_LEN 12 // complete length
358 #define RECS80EXT_STOP_BIT 1 // has stop bit
359 #define RECS80EXT_LSB 0 // MSB...LSB
360 #define RECS80EXT_FLAGS 0 // flags
362 /*---------------------------------------------------------------------------------------------------------------------------------------------------
364 *---------------------------------------------------------------------------------------------------------------------------------------------------
366 #define NUBERT_START_BIT_PULSE_TIME 1340.0e-6 // 1340 usec pulse
367 #define NUBERT_START_BIT_PAUSE_TIME 340.0e-6 // 340 usec pause
368 #define NUBERT_1_PULSE_TIME 1340.0e-6 // 1340 usec pulse
369 #define NUBERT_1_PAUSE_TIME 340.0e-6 // 340 usec pause
370 #define NUBERT_0_PULSE_TIME 500.0e-6 // 500 usec pulse
371 #define NUBERT_0_PAUSE_TIME 1300.0e-6 // 1300 usec pause
372 #define NUBERT_FRAMES 2 // Nubert sends 2 frames
373 #define NUBERT_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // auto repetition after 35ms
374 #define NUBERT_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 45ms
375 #define NUBERT_ADDRESS_OFFSET 0 // skip 0 bits
376 #define NUBERT_ADDRESS_LEN 0 // read 0 address bits
377 #define NUBERT_COMMAND_OFFSET 0 // skip 0 bits
378 #define NUBERT_COMMAND_LEN 10 // read 10 bits
379 #define NUBERT_COMPLETE_DATA_LEN 10 // complete length
380 #define NUBERT_STOP_BIT 1 // has stop bit
381 #define NUBERT_LSB 0 // MSB?
382 #define NUBERT_FLAGS 0 // flags
384 /*---------------------------------------------------------------------------------------------------------------------------------------------------
387 * Similar to NUBERT, but
388 * - has data bit instead of stop bit
389 * - has NO frame repetition
390 *---------------------------------------------------------------------------------------------------------------------------------------------------
392 #define FAN_START_BIT_PULSE_TIME 1280.0e-6 // 1280 usec pulse
393 #define FAN_START_BIT_PAUSE_TIME 380.0e-6 // 380 usec pause
394 #define FAN_1_PULSE_TIME 1280.0e-6 // 1280 usec pulse
395 #define FAN_1_PAUSE_TIME 380.0e-6 // 380 usec pause
396 #define FAN_0_PULSE_TIME 380.0e-6 // 380 usec pulse
397 #define FAN_0_PAUSE_TIME 1280.0e-6 // 1280 usec pause
398 #define FAN_FRAMES 1 // FAN sends only 1 frame (NUBERT sends 2)
399 #define FAN_AUTO_REPETITION_PAUSE_TIME 6.6e-3 // auto repetition after 6.6ms
400 #define FAN_FRAME_REPEAT_PAUSE_TIME 6.6e-3 // frame repeat after 6.6ms
401 #define FAN_ADDRESS_OFFSET 0 // skip 0 bits
402 #define FAN_ADDRESS_LEN 0 // read 0 address bits
403 #define FAN_COMMAND_OFFSET 0 // skip 0 bits
404 #define FAN_COMMAND_LEN 11 // read 10 bits
405 #define FAN_COMPLETE_DATA_LEN 11 // complete length
406 #define FAN_STOP_BIT 0 // has NO stop bit
407 #define FAN_LSB 0 // MSB
408 #define FAN_FLAGS 0 // flags
410 /*---------------------------------------------------------------------------------------------------------------------------------------------------
412 *---------------------------------------------------------------------------------------------------------------------------------------------------
414 #define SPEAKER_START_BIT_PULSE_TIME 440.0e-6 // 440 usec pulse
415 #define SPEAKER_START_BIT_PAUSE_TIME 1250.0e-6 // 1250 usec pause
416 #define SPEAKER_1_PULSE_TIME 1250.0e-6 // 1250 usec pulse
417 #define SPEAKER_1_PAUSE_TIME 440.0e-6 // 440 usec pause
418 #define SPEAKER_0_PULSE_TIME 440.0e-6 // 440 usec pulse
419 #define SPEAKER_0_PAUSE_TIME 1250.0e-6 // 1250 usec pause
420 #define SPEAKER_FRAMES 2 // SPEAKER sends 2 frames
421 #define SPEAKER_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // auto repetition after 35ms
422 #define SPEAKER_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 45ms
423 #define SPEAKER_ADDRESS_OFFSET 0 // skip 0 bits
424 #define SPEAKER_ADDRESS_LEN 0 // read 0 address bits
425 #define SPEAKER_COMMAND_OFFSET 0 // skip 0 bits
426 #define SPEAKER_COMMAND_LEN 10 // read 10 bits
427 #define SPEAKER_COMPLETE_DATA_LEN 10 // complete length
428 #define SPEAKER_STOP_BIT 1 // has stop bit
429 #define SPEAKER_LSB 0 // MSB?
430 #define SPEAKER_FLAGS 0 // flags
432 /*---------------------------------------------------------------------------------------------------------------------------------------------------
434 *---------------------------------------------------------------------------------------------------------------------------------------------------
436 #define BANG_OLUFSEN_START_BIT1_PULSE_TIME 200.0e-6 // 200 usec pulse
437 #define BANG_OLUFSEN_START_BIT1_PAUSE_TIME 3125.0e-6 // 3125 usec pause
438 #define BANG_OLUFSEN_START_BIT2_PULSE_TIME 200.0e-6 // 200 usec pulse
439 #define BANG_OLUFSEN_START_BIT2_PAUSE_TIME 3125.0e-6 // 3125 usec pause
440 #define BANG_OLUFSEN_START_BIT3_PULSE_TIME 200.0e-6 // 200 usec pulse
441 #define BANG_OLUFSEN_START_BIT3_PAUSE_TIME 15625.0e-6 // 15625 usec pause
442 #define BANG_OLUFSEN_START_BIT4_PULSE_TIME 200.0e-6 // 200 usec pulse
443 #define BANG_OLUFSEN_START_BIT4_PAUSE_TIME 3125.0e-6 // 3125 usec pause
444 #define BANG_OLUFSEN_PULSE_TIME 200.0e-6 // 200 usec pulse
445 #define BANG_OLUFSEN_1_PAUSE_TIME 9375.0e-6 // 9375 usec pause
446 #define BANG_OLUFSEN_0_PAUSE_TIME 3125.0e-6 // 3125 usec pause
447 #define BANG_OLUFSEN_R_PAUSE_TIME 6250.0e-6 // 6250 usec pause (repeat last bit)
448 #define BANG_OLUFSEN_TRAILER_BIT_PAUSE_TIME 12500.0e-6 // 12500 usec pause (trailer bit)
449 #define BANG_OLUFSEN_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
450 #define BANG_OLUFSEN_ADDRESS_OFFSET 0 // no address bits
451 #define BANG_OLUFSEN_ADDRESS_LEN 0 // no address bits
452 #define BANG_OLUFSEN_COMMAND_OFFSET 3 // skip startbits 2, 3, 4
453 #define BANG_OLUFSEN_COMMAND_LEN 16 // read 16 command bits
454 #define BANG_OLUFSEN_COMPLETE_DATA_LEN 20 // complete length: startbits 2, 3, 4 + 16 data bits + trailer bit
455 #define BANG_OLUFSEN_STOP_BIT 1 // has stop bit
456 #define BANG_OLUFSEN_LSB 0 // MSB...LSB
457 #define BANG_OLUFSEN_FLAGS 0 // flags
459 /*---------------------------------------------------------------------------------------------------------------------------------------------------
461 *---------------------------------------------------------------------------------------------------------------------------------------------------
463 #define GRUNDIG_NOKIA_IR60_BIT_TIME 528.0e-6 // 528 usec pulse/pause
464 #define GRUNDIG_NOKIA_IR60_PRE_PAUSE_TIME 2639.0e-6 // 2639 usec pause after pre bit
465 #define GRUNDIG_NOKIA_IR60_FRAME_REPEAT_PAUSE_TIME 117.76e-3 // info frame repeat after 117.76 ms
466 #define GRUNDIG_NOKIA_IR60_STOP_BIT 0 // has no stop bit
467 #define GRUNDIG_NOKIA_IR60_LSB 1 // MSB...LSB
468 #define GRUNDIG_NOKIA_IR60_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags
470 #define GRUNDIG_FRAMES 2 // GRUNDIG sends each frame 1+1 times
471 #define GRUNDIG_AUTO_REPETITION_PAUSE_TIME 20.0e-3 // repetition after 20ms
472 #define GRUNDIG_ADDRESS_OFFSET 0 // no address
473 #define GRUNDIG_ADDRESS_LEN 0 // no address
474 #define GRUNDIG_COMMAND_OFFSET 1 // skip 1 start bit
475 #define GRUNDIG_COMMAND_LEN 9 // read 9 command bits
476 #define GRUNDIG_COMPLETE_DATA_LEN 10 // complete length: 1 start bit + 9 data bits
478 #define NOKIA_FRAMES 3 // NOKIA sends each frame 1 + 1 + 1 times
479 #define NOKIA_AUTO_REPETITION_PAUSE_TIME 20.0e-3 // repetition after 20ms
480 #define NOKIA_ADDRESS_OFFSET 9 // skip 9 bits (1 start bit + 8 data bits)
481 #define NOKIA_ADDRESS_LEN 8 // 7 address bits
482 #define NOKIA_COMMAND_OFFSET 1 // skip 1 bit (1 start bit)
483 #define NOKIA_COMMAND_LEN 8 // read 8 command bits
484 #define NOKIA_COMPLETE_DATA_LEN 17 // complete length: 1 start bit + 8 address bits + 8 command bits
486 /*---------------------------------------------------------------------------------------------------------------------------------------------------
488 *---------------------------------------------------------------------------------------------------------------------------------------------------
490 #define IR60_FRAMES 2 // IR60 sends each frame 1+1 times
491 #define IR60_AUTO_REPETITION_PAUSE_TIME 22.2e-3 // repetition after 22.2ms
492 #define IR60_TIMEOUT_TIME 5000.0e-6 // timeout grundig frame, switch to IR60
493 #define IR60_ADDRESS_OFFSET 0 // skip 1 bits
494 #define IR60_ADDRESS_LEN 0 // read 0 address bits
495 #define IR60_COMMAND_OFFSET 0 // skip 1 bit (start bit after pre bit, always 1)
496 #define IR60_COMMAND_LEN 7 // read 6 command bits
497 #define IR60_COMPLETE_DATA_LEN 7 // complete length
499 /*---------------------------------------------------------------------------------------------------------------------------------------------------
501 *---------------------------------------------------------------------------------------------------------------------------------------------------
505 #define SIEMENS_OR_RUWIDO_START_BIT_PULSE_TIME 275.0e-6 // 275 usec pulse
506 #define SIEMENS_OR_RUWIDO_START_BIT_PAUSE_TIME 550.0e-6 // 550 usec pause
507 #define SIEMENS_OR_RUWIDO_BIT_PULSE_TIME 275.0e-6 // 275 usec short pulse
508 #define SIEMENS_OR_RUWIDO_BIT_PULSE_TIME_2 550.0e-6 // 550 usec long pulse
509 #define SIEMENS_OR_RUWIDO_BIT_PAUSE_TIME 275.0e-6 // 275 usec short pause
510 #define SIEMENS_OR_RUWIDO_BIT_PAUSE_TIME_2 550.0e-6 // 550 usec long pause
512 #define SIEMENS_OR_RUWIDO_START_BIT_PULSE_TIME 370.0e-6 // 370 usec pulse
513 #define SIEMENS_OR_RUWIDO_START_BIT_PAUSE_TIME 550.0e-6 // 550 usec pause
514 #define SIEMENS_OR_RUWIDO_BIT_PULSE_TIME 370.0e-6 // 370 usec short pulse
515 #define SIEMENS_OR_RUWIDO_BIT_PULSE_TIME_2 680.0e-6 // 680 usec long pulse
516 #define SIEMENS_OR_RUWIDO_BIT_PAUSE_TIME 275.0e-6 // 275 usec short pause
517 #define SIEMENS_OR_RUWIDO_BIT_PAUSE_TIME_2 550.0e-6 // 550 usec long pause
520 #define SIEMENS_OR_RUWIDO_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
521 #define SIEMENS_OR_RUWIDO_STOP_BIT 0 // has no stop bit
522 #define SIEMENS_OR_RUWIDO_LSB 0 // MSB...LSB
523 #define SIEMENS_OR_RUWIDO_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags
525 #define RUWIDO_ADDRESS_OFFSET 0 // skip 0 bits
526 #define RUWIDO_ADDRESS_LEN 9 // read 9 address bits
527 #define RUWIDO_COMMAND_OFFSET 9 // skip 9 bits
528 #define RUWIDO_COMMAND_LEN 8 // read 7 + 1 command bits, last bit is only check bit
529 #define RUWIDO_COMPLETE_DATA_LEN 17 // complete length
531 #define SIEMENS_ADDRESS_OFFSET 0 // skip 0 bits
532 #define SIEMENS_ADDRESS_LEN 11 // read 11 bits
533 #define SIEMENS_COMMAND_OFFSET 11 // skip 11 bits
534 #define SIEMENS_COMMAND_LEN 11 // read 10 + 1 command bits, last bit is only check bit
535 #define SIEMENS_COMPLETE_DATA_LEN 22 // complete length
537 /*---------------------------------------------------------------------------------------------------------------------------------------------------
539 *---------------------------------------------------------------------------------------------------------------------------------------------------
541 #define FDC_START_BIT_PULSE_TIME 2085.0e-6 // 2085 usec pulse
542 #define FDC_START_BIT_PAUSE_TIME 966.0e-6 // 966 usec pause
543 #define FDC_PULSE_TIME 300.0e-6 // 300 usec pulse
544 #define FDC_1_PAUSE_TIME 715.0e-6 // 715 usec pause
545 #define FDC_0_PAUSE_TIME 220.0e-6 // 220 usec pause
546 #define FDC_FRAME_REPEAT_PAUSE_TIME 60.0e-3 // frame repeat after 60ms
547 #define FDC_ADDRESS_OFFSET 0 // skip 0 bits
548 #define FDC_ADDRESS_LEN 14 // read 14 address bits, but use only 6, shift 8 into command
549 #define FDC_COMMAND_OFFSET 20 // skip 20 bits
550 #define FDC_COMMAND_LEN 12 // read 12 bits
551 #define FDC_COMPLETE_DATA_LEN 40 // complete length
552 #define FDC_STOP_BIT 1 // has stop bit
553 #define FDC_LSB 1 // LSB...MSB
554 #define FDC_FLAGS 0 // flags
556 /*---------------------------------------------------------------------------------------------------------------------------------------------------
558 *---------------------------------------------------------------------------------------------------------------------------------------------------
560 #define RCCAR_START_BIT_PULSE_TIME 2000.0e-6 // 2000 usec pulse
561 #define RCCAR_START_BIT_PAUSE_TIME 2000.0e-6 // 2000 usec pause
562 #define RCCAR_PULSE_TIME 600.0e-6 // 360 usec pulse
563 #define RCCAR_1_PAUSE_TIME 450.0e-6 // 650 usec pause
564 #define RCCAR_0_PAUSE_TIME 900.0e-6 // 180 usec pause
565 #define RCCAR_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms
566 #define RCCAR_ADDRESS_OFFSET 0 // skip 0 bits
567 #define RCCAR_ADDRESS_LEN 0 // read 0 address bits
568 #define RCCAR_COMMAND_OFFSET 0 // skip 0 bits
569 #define RCCAR_COMMAND_LEN 13 // read 13 bits
570 #define RCCAR_COMPLETE_DATA_LEN 13 // complete length
571 #define RCCAR_STOP_BIT 1 // has stop bit
572 #define RCCAR_LSB 1 // LSB...MSB
573 #define RCCAR_FLAGS 0 // flags
575 /*---------------------------------------------------------------------------------------------------------------------------------------------------
577 *---------------------------------------------------------------------------------------------------------------------------------------------------
579 #define JVC_START_BIT_PULSE_TIME 9000.0e-6 // 9000 usec pulse
580 #define JVC_START_BIT_PAUSE_TIME 4500.0e-6 // 4500 usec pause
581 #define JVC_PULSE_TIME 560.0e-6 // 560 usec pulse
582 #define JVC_1_PAUSE_TIME 1690.0e-6 // 1690 usec pause
583 #define JVC_0_PAUSE_TIME 560.0e-6 // 560 usec pause
584 #define JVC_FRAME_REPEAT_PAUSE_TIME 22.0e-3 // frame repeat after 22ms
585 #define JVC_ADDRESS_OFFSET 0 // skip 0 bits
586 #define JVC_ADDRESS_LEN 4 // read 4 address bits
587 #define JVC_COMMAND_OFFSET 4 // skip 4 bits
588 #define JVC_COMMAND_LEN 12 // read 12 bits
589 #define JVC_COMPLETE_DATA_LEN 16 // complete length
590 #define JVC_STOP_BIT 1 // has stop bit
591 #define JVC_LSB 1 // LSB...MSB
592 #define JVC_FLAGS 0 // flags
594 /*---------------------------------------------------------------------------------------------------------------------------------------------------
596 *---------------------------------------------------------------------------------------------------------------------------------------------------
598 #define NIKON_START_BIT_PULSE_TIME 2200.0e-6 // 2200 usec pulse
599 #define NIKON_START_BIT_PAUSE_TIME 27100.0e-6 // 27100 usec pause
600 #define NIKON_PULSE_TIME 500.0e-6 // 500 usec pulse
601 #define NIKON_1_PAUSE_TIME 3500.0e-6 // 3500 usec pause
602 #define NIKON_0_PAUSE_TIME 1500.0e-6 // 1500 usec pause
603 #define NIKON_FRAME_REPEAT_PAUSE_TIME 60.0e-3 // frame repeat after 60ms
604 #define NIKON_ADDRESS_OFFSET 0 // skip 0 bits
605 #define NIKON_ADDRESS_LEN 0 // read 0 address bits
606 #define NIKON_COMMAND_OFFSET 0 // skip 0 bits
607 #define NIKON_COMMAND_LEN 2 // read 2 bits
608 #define NIKON_COMPLETE_DATA_LEN 2 // complete length
609 #define NIKON_STOP_BIT 1 // has stop bit
610 #define NIKON_LSB 0 // LSB...MSB
611 #define NIKON_FLAGS 0 // flags
613 /*---------------------------------------------------------------------------------------------------------------------------------------------------
615 *---------------------------------------------------------------------------------------------------------------------------------------------------
617 #define KATHREIN_START_BIT_PULSE_TIME 210.0e-6 // 1340 usec pulse
618 #define KATHREIN_START_BIT_PAUSE_TIME 6218.0e-6 // 340 usec pause
619 #define KATHREIN_1_PULSE_TIME 210.0e-6 // 1340 usec pulse
620 #define KATHREIN_1_PAUSE_TIME 3000.0e-6 // 340 usec pause
621 #define KATHREIN_0_PULSE_TIME 210.0e-6 // 500 usec pulse
622 #define KATHREIN_0_PAUSE_TIME 1400.0e-6 // 1300 usec pause
623 #define KATHREIN_SYNC_BIT_PAUSE_LEN_TIME 4600.0e-6 // 4600 usec sync (on 6th and/or 8th bit)
624 #define KATHREIN_FRAMES 1 // Kathrein sends 1 frame
625 #define KATHREIN_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // auto repetition after 35ms
626 #define KATHREIN_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 35ms
627 #define KATHREIN_ADDRESS_OFFSET 1 // skip 1 bits
628 #define KATHREIN_ADDRESS_LEN 4 // read 4 address bits
629 #define KATHREIN_COMMAND_OFFSET 5 // skip 5 bits
630 #define KATHREIN_COMMAND_LEN 7 // read 7 bits
631 #define KATHREIN_COMPLETE_DATA_LEN 13 // complete length
632 #define KATHREIN_STOP_BIT 1 // has stop bit
633 #define KATHREIN_LSB 0 // MSB
634 #define KATHREIN_FLAGS 0 // flags
636 /*---------------------------------------------------------------------------------------------------------------------------------------------------
638 *---------------------------------------------------------------------------------------------------------------------------------------------------
640 #define NETBOX_START_BIT_PULSE_TIME 2400.0e-6 // 2400 usec pulse
641 #define NETBOX_START_BIT_PAUSE_TIME 800.0e-6 // 800 usec pause
642 #define NETBOX_PULSE_TIME 800.0e-6 // 800 usec pulse
643 #define NETBOX_PAUSE_TIME 800.0e-6 // 800 usec pause
644 #define NETBOX_FRAMES 1 // Netbox sends 1 frame
645 #define NETBOX_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // auto repetition after 35ms
646 #define NETBOX_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 35ms
647 #define NETBOX_ADDRESS_OFFSET 0 // skip 0 bits
648 #define NETBOX_ADDRESS_LEN 3 // read 3 address bits
649 #define NETBOX_COMMAND_OFFSET 3 // skip 3 bits
650 #define NETBOX_COMMAND_LEN 13 // read 13 bits
651 #define NETBOX_COMPLETE_DATA_LEN 16 // complete length
652 #define NETBOX_STOP_BIT 0 // has no stop bit
653 #define NETBOX_LSB 1 // LSB
654 #define NETBOX_FLAGS IRMP_PARAM_FLAG_IS_SERIAL // flags
656 /*---------------------------------------------------------------------------------------------------------------------------------------------------
658 *---------------------------------------------------------------------------------------------------------------------------------------------------
660 #define LEGO_START_BIT_PULSE_TIME 158.0e-6 // 158 usec pulse ( 6 x 1/38kHz)
661 #define LEGO_START_BIT_PAUSE_TIME 1026.0e-6 // 1026 usec pause (39 x 1/38kHz)
662 #define LEGO_PULSE_TIME 158.0e-6 // 158 usec pulse ( 6 x 1/38kHz)
663 #define LEGO_1_PAUSE_TIME 553.0e-6 // 553 usec pause (21 x 1/38kHz)
664 #define LEGO_0_PAUSE_TIME 263.0e-6 // 263 usec pause (10 x 1/38kHz)
665 #define LEGO_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms
666 #define LEGO_ADDRESS_OFFSET 0 // skip 0 bits
667 #define LEGO_ADDRESS_LEN 0 // read 0 address bits
668 #define LEGO_COMMAND_OFFSET 0 // skip 0 bits
669 #define LEGO_COMMAND_LEN 16 // read 16 bits (12 command + 4 CRC)
670 #define LEGO_COMPLETE_DATA_LEN 16 // complete length
671 #define LEGO_STOP_BIT 1 // has stop bit
672 #define LEGO_LSB 0 // MSB...LSB
673 #define LEGO_FLAGS 0 // flags
675 /*---------------------------------------------------------------------------------------------------------------------------------------------------
677 *---------------------------------------------------------------------------------------------------------------------------------------------------
679 #define THOMSON_PULSE_TIME 550.0e-6 // 550 usec pulse
680 #define THOMSON_1_PAUSE_TIME 4500.0e-6 // 4500 usec pause
681 #define THOMSON_0_PAUSE_TIME 2000.0e-6 // 2000 usec pause
682 #define THOMSON_FRAMES 1 // THOMSON sends 1 frame
683 #define THOMSON_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // repetition after 35ms
684 #define THOMSON_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 35ms
685 #define THOMSON_ADDRESS_OFFSET 0 // skip 0 bits
686 #define THOMSON_ADDRESS_LEN 4 // read 4 address bits
687 #define THOMSON_COMMAND_OFFSET 5 // skip 4 address bits + 1 toggle bit
688 #define THOMSON_COMMAND_LEN 7 // read 7 command bits
689 #define THOMSON_COMPLETE_DATA_LEN 12 // complete length
690 #define THOMSON_STOP_BIT 1 // has stop bit
691 #define THOMSON_LSB 0 // MSB...LSB
692 #define THOMSON_FLAGS 0 // flags
694 /*---------------------------------------------------------------------------------------------------------------------------------------------------
696 *---------------------------------------------------------------------------------------------------------------------------------------------------
698 #define BOSE_START_BIT_PULSE_TIME 1060.0e-6 // 1060 usec pulse
699 #define BOSE_START_BIT_PAUSE_TIME 1425.0e-6 // 1425 usec pause
700 #define BOSE_PULSE_TIME 550.0e-6 // 550 usec pulse
701 #define BOSE_1_PAUSE_TIME 1425.0e-6 // 1425 usec pause
702 #define BOSE_0_PAUSE_TIME 437.0e-6 // 437 usec pause
703 #define BOSE_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms???
704 #define BOSE_ADDRESS_OFFSET 0 // skip 0 bits
705 #define BOSE_ADDRESS_LEN 0 // read 16 address bits
706 #define BOSE_COMMAND_OFFSET 0 // skip 16 bits (8 address + 8 /address)
707 #define BOSE_COMMAND_LEN 16 // read 16 bits (8 command + 8 /command)
708 #define BOSE_COMPLETE_DATA_LEN 16 // complete length
709 #define BOSE_STOP_BIT 1 // has stop bit
710 #define BOSE_LSB 1 // LSB...MSB
711 #define BOSE_FLAGS 0 // flags
713 /*---------------------------------------------------------------------------------------------------------------------------------------------------
715 * In reality A1 TV Box has no start bit with 300/340 usec. There are 2 start bits "10" with 250us pulse + 150us pause + 150us pause + 250us pulse
716 * This is not very easy to detect, because 1st and 2nd pause of both start bits are closely spaced.
717 * So IRMP looks for pseudo start bit with 300/340 usec and ignores the second half of the 2nd bit (250us pulse)
718 * This method only works because the first data bit (which is the 3rd bit) following is always "1":
719 * IRMP treats the first "long" pulse (250us of 2nd start bit + 250us of 1st data bit) of this "1" as a first _short_ pulse.
720 * This is a bug in IRMP's manchester decoder, but a good feature here ;-)
721 *---------------------------------------------------------------------------------------------------------------------------------------------------
723 #define A1TVBOX_START_BIT_PULSE_TIME 300.0e-6 // 300 usec pulse
724 #define A1TVBOX_START_BIT_PAUSE_TIME 340.0e-6 // 340 usec pause
725 #define A1TVBOX_BIT_PULSE_TIME 250.0e-6 // 250 usec pulse
726 #define A1TVBOX_BIT_PAUSE_TIME 150.0e-6 // 150 usec pulse
727 #define A1TVBOX_STOP_BIT 0 // has no stop bit
728 #define A1TVBOX_LSB 0 // MSB...LSB
729 #define A1TVBOX_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1 ) // flags
730 #define A1TVBOX_FRAMES 1 // A1TVBOX sends each frame 1 times
731 #define A1TVBOX_ADDRESS_OFFSET 1 // skip 1 bits
732 #define A1TVBOX_ADDRESS_LEN 8 // read 8 address bits
733 #define A1TVBOX_COMMAND_OFFSET 9 // skip 9 bits (start bit + address)
734 #define A1TVBOX_COMMAND_LEN 8 // read 8 command bits
735 #define A1TVBOX_COMPLETE_DATA_LEN 17 // complete length incl. start bit
736 #define A1TVBOX_FRAME_REPEAT_PAUSE_TIME 50.0e-3 // 50 msec pause between frames, don't know if it is correct
738 /*---------------------------------------------------------------------------------------------------------------------------------------------------
740 * See notes for A1TVBOX
741 *---------------------------------------------------------------------------------------------------------------------------------------------------
743 #define MERLIN_START_BIT_PULSE_TIME 210.0e-6 // 210 usec pulse
744 #define MERLIN_START_BIT_PAUSE_TIME 420.0e-6 // 429 usec pause
745 #define MERLIN_BIT_PULSE_TIME 210.0e-6 // 210 usec pulse
746 #define MERLIN_BIT_PAUSE_TIME 210.0e-6 // 210 usec pulse
747 #define MERLIN_STOP_BIT 0 // has no stop bit
748 #define MERLIN_LSB 0 // MSB...LSB
749 #define MERLIN_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1 ) // flags
750 #define MERLIN_FRAMES 1 // MERLIN sends each frame 1 times
751 #define MERLIN_ADDRESS_OFFSET 1 // skip 1 bits
752 #define MERLIN_ADDRESS_LEN 8 // read 8 address bits
753 #define MERLIN_COMMAND_OFFSET 8 // skip 9 bits (start bit + address)
754 #define MERLIN_COMMAND_LEN 10 // read 8 command bits
755 #define MERLIN_COMPLETE_DATA_LEN 19 // complete length incl. start bit
756 #define MERLIN_FRAME_REPEAT_PAUSE_TIME 50.0e-3 // 50 msec pause between frames, don't know if it is correct
758 /*---------------------------------------------------------------------------------------------------------------------------------------------------
759 * ORTEK (Hama): 6 address bits + 2 frame type bits + 6 command bits + 1 parity bit + 1 unknown bit + "1" + "0"
760 *---------------------------------------------------------------------------------------------------------------------------------------------------
762 #define ORTEK_START_BIT_PULSE_TIME 2000.0e-6 // 2000 usec pulse
763 #define ORTEK_START_BIT_PAUSE_TIME 1000.0e-6 // 1000 usec pause
764 #define ORTEK_BIT_TIME 500.0e-6 // 500 usec pulse/pause
765 #define ORTEK_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
766 #define ORTEK_ADDRESS_OFFSET 0 // skip 0 bits
767 #define ORTEK_ADDRESS_LEN 8 // read 6 address bits + 2 special bits
768 #define ORTEK_COMMAND_OFFSET 8 // skip 6 address bits + 2 special bits
769 #define ORTEK_COMMAND_LEN 6 // read 6 command bits
770 #define ORTEK_COMPLETE_DATA_LEN 18 // complete length
771 #define ORTEK_STOP_BIT 0 // has no stop bit
772 #define ORTEK_LSB 0 // MSB...LSB
773 #define ORTEK_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags
775 /*---------------------------------------------------------------------------------------------------------------------------------------------------
777 *---------------------------------------------------------------------------------------------------------------------------------------------------
779 #define TELEFUNKEN_START_BIT_PULSE_TIME 600.0e-6 // 600 usec pulse
780 #define TELEFUNKEN_START_BIT_PAUSE_TIME 1500.0e-6 // 1500 usec pause
781 #define TELEFUNKEN_PULSE_TIME 600.0e-6 // 600 usec pulse
782 #define TELEFUNKEN_1_PAUSE_TIME 1500.0e-6 // 1500 usec pause
783 #define TELEFUNKEN_0_PAUSE_TIME 600.0e-6 // 600 usec pause
784 #define TELEFUNKEN_FRAME_REPEAT_PAUSE_TIME 22.0e-3 // frame repeat after XX ms ?????
785 #define TELEFUNKEN_ADDRESS_OFFSET 0 // skip 0 bits
786 #define TELEFUNKEN_ADDRESS_LEN 0 // read 0 address bits
787 #define TELEFUNKEN_COMMAND_OFFSET 0 // skip 0 bits
788 #define TELEFUNKEN_COMMAND_LEN 15 // read 15 bits
789 #define TELEFUNKEN_COMPLETE_DATA_LEN 15 // complete length
790 #define TELEFUNKEN_STOP_BIT 1 // has stop bit
791 #define TELEFUNKEN_LSB 0 // LSB...MSB
792 #define TELEFUNKEN_FLAGS 0 // flags
794 /*---------------------------------------------------------------------------------------------------------------------------------------------------
796 *---------------------------------------------------------------------------------------------------------------------------------------------------
798 #define ROOMBA_START_BIT_PULSE_TIME 2790.0e-6 // 2790 usec pulse
799 #define ROOMBA_START_BIT_PAUSE_TIME 930.0e-6 // 930 usec pause
800 #define ROOMBA_0_PULSE_TIME 930.0e-6 // 930 usec pulse
801 #define ROOMBA_1_PULSE_TIME 2790.0e-6 // 2790 usec pulse
802 #define ROOMBA_0_PAUSE_TIME 2790.0e-6 // 2790 usec pause
803 #define ROOMBA_1_PAUSE_TIME 930.0e-6 // 930 usec pause
804 #define ROOMBA_FRAME_REPEAT_PAUSE_TIME 18.0e-3 // frame repeat after 18ms
805 #define ROOMBA_ADDRESS_OFFSET 0 // skip 0 bits
806 #define ROOMBA_ADDRESS_LEN 0 // read 0 address bits
807 #define ROOMBA_COMMAND_OFFSET 0 // skip 0 bits
808 #define ROOMBA_COMMAND_LEN 7 // read 7 bits
809 #define ROOMBA_COMPLETE_DATA_LEN 7 // complete length
810 #define ROOMBA_STOP_BIT 0 // has stop bit
811 #define ROOMBA_LSB 0 // MSB...LSB
812 #define ROOMBA_FLAGS 0 // flags
813 #define ROOMBA_FRAMES 8 // ROOMBA sends 8 frames (this is a lie, but more comfortable)
815 /*---------------------------------------------------------------------------------------------------------------------------------------------------
816 * RC-MM (32, 24, or 12 bit)
817 *---------------------------------------------------------------------------------------------------------------------------------------------------
819 #define RCMM32_START_BIT_PULSE_TIME 500.0e-6 // 500 usec pulse
820 #define RCMM32_START_BIT_PAUSE_TIME 220.0e-6 // 220 usec pause
821 #define RCMM32_PULSE_TIME 230.0e-6 // 230 usec pulse
822 #define RCMM32_00_PAUSE_TIME 220.0e-6 // 220 usec pause
823 #define RCMM32_01_PAUSE_TIME 370.0e-6 // 370 usec pause
824 #define RCMM32_10_PAUSE_TIME 540.0e-6 // 540 usec pause
825 #define RCMM32_11_PAUSE_TIME 720.0e-6 // 720 usec pause
827 #define RCMM32_FRAME_REPEAT_PAUSE_TIME 80.0e-3 // frame repeat after 80 ms
828 #define RCMM32_ADDRESS_OFFSET 0 // skip 0 bits
829 #define RCMM32_ADDRESS_LEN 16 // read 16 address bits
830 #define RCMM32_COMMAND_OFFSET 17 // skip 17 bits
831 #define RCMM32_COMMAND_LEN 15 // read 15 bits
832 #define RCMM32_COMPLETE_DATA_LEN 32 // complete length
833 #define RCMM32_STOP_BIT 1 // has stop bit
834 #define RCMM32_LSB 0 // LSB...MSB
835 #define RCMM32_FLAGS 0 // flags
837 /*---------------------------------------------------------------------------------------------------------------------------------------------------
839 *---------------------------------------------------------------------------------------------------------------------------------------------------
841 #define PENTAX_START_BIT_PULSE_TIME 13000.0e-6 // 13 msec pulse
842 #define PENTAX_START_BIT_PAUSE_TIME 3000.0e-6 // 3 msec pause
843 #define PENTAX_PULSE_TIME 1000.0e-6 // 1 msec pulse
844 #define PENTAX_1_PAUSE_TIME 3000.0e-6 // 3 msec pause
845 #define PENTAX_0_PAUSE_TIME 1000.0e-6 // 1 msec pause
846 #define PENTAX_FRAME_REPEAT_PAUSE_TIME 60.0e-3 // frame repeat after 60ms
847 #define PENTAX_ADDRESS_OFFSET 0 // skip 0 bits
848 #define PENTAX_ADDRESS_LEN 0 // read 0 address bits
849 #define PENTAX_COMMAND_OFFSET 0 // skip 0 bits
850 #define PENTAX_COMMAND_LEN 6 // read 6 bits
851 #define PENTAX_COMPLETE_DATA_LEN 6 // complete length
852 #define PENTAX_STOP_BIT 1 // has stop bit
853 #define PENTAX_LSB 0 // LSB...MSB
854 #define PENTAX_FLAGS 0 // flags
856 /*---------------------------------------------------------------------------------------------------------------------------------------------------
857 * ACP24: Stiebel Eltron ACP24 air conditioner
858 *---------------------------------------------------------------------------------------------------------------------------------------------------
860 #define ACP24_START_BIT_PULSE_TIME 390.0e-6 // 390 usec pulse
861 #define ACP24_START_BIT_PAUSE_TIME 950.0e-6 // 950 usec pause
862 #define ACP24_PULSE_TIME 390.0e-6 // 390 usec pulse
863 #define ACP24_1_PAUSE_TIME 1300.0e-6 // 1300 usec pause
864 #define ACP24_0_PAUSE_TIME 950.0e-6 // 950 usec pause
865 #define ACP24_FRAME_REPEAT_PAUSE_TIME 22.0e-3 // frame repeat after 22ms?
866 #define ACP24_ADDRESS_OFFSET 0 // skip 0 bits
867 #define ACP24_ADDRESS_LEN 0 // read 6 address bits
868 #define ACP24_COMMAND_OFFSET 0 // skip 6 bits
869 #define ACP24_COMMAND_LEN 0 // read 0 bits (70 bits will be read and compressed by special routine)
870 #define ACP24_COMPLETE_DATA_LEN 70 // complete length
871 #define ACP24_STOP_BIT 1 // has stop bit
872 #define ACP24_LSB 0 // LSB...MSB
873 #define ACP24_FLAGS 0 // flags
875 /*---------------------------------------------------------------------------------------------------------------------------------------------------
876 * RADIO1 - e.g. Tevion
877 *---------------------------------------------------------------------------------------------------------------------------------------------------
879 #define RADIO1_START_BIT_PULSE_TIME 3000.0e-6 // 3000 usec pulse
880 #define RADIO1_START_BIT_PAUSE_TIME 7000.0e-6 // 7000 usec pulse
881 #define RADIO1_0_PULSE_TIME 500.0e-6 // 500 usec pulse
882 #define RADIO1_0_PAUSE_TIME 1000.0e-6 // 1000 usec pause
883 #define RADIO1_1_PULSE_TIME 1000.0e-6 // 1000 usec pulse
884 #define RADIO1_1_PAUSE_TIME 500.0e-6 // 500 usec pause
886 #define RADIO1_FRAME_REPEAT_PAUSE_TIME 25.0e-3 // frame repeat after 25ms
887 #define RADIO1_ADDRESS_OFFSET 4 // skip 4 bits
888 #define RADIO1_ADDRESS_LEN 16 // read 16 address bits
889 #define RADIO1_COMMAND_OFFSET 20 // skip 4 + 16 bits
890 #define RADIO1_COMMAND_LEN 3 // read 3 command bits
891 #define RADIO1_COMPLETE_DATA_LEN 23 // complete length
892 #define RADIO1_STOP_BIT 1 // has stop bit
893 #define RADIO1_LSB 1 // LSB...MSB?
894 #define RADIO1_FLAGS 0 // flags
896 /*---------------------------------------------------------------------------------------------------------------------------------------------------
898 *---------------------------------------------------------------------------------------------------------------------------------------------------
900 #define AUTO_FRAME_REPETITION_TIME 80.0e-3 // SIRCS/SAMSUNG32/NUBERT: automatic repetition after 25-50ms
902 #endif // _IRMP_PROTOCOLS_H_
projects / irmp.git / blob