irmpconfig.h

   1 /*---------------------------------------------------------------------------------------------------------------------------------------------------
   2  * irmpconfig.h
   3  *
   4  * DO NOT INCLUDE THIS FILE, WILL BE INCLUDED BY IRMP.H!
   5  *
   6  * Copyright (c) 2009-2015 Frank Meyer - frank(at)fli4l.de
   7  * Extensions for PIC 12F1820 W.Strobl 2014-07-20
   8  *
   9  * $Id: irmpconfig.h,v 1.127 2015/04/23 12:47:29 fm Exp $
  10  *
  11  * This program is free software; you can redistribute it and/or modify
  12  * it under the terms of the GNU General Public License as published by
  13  * the Free Software Foundation; either version 2 of the License, or
  14  * (at your option) any later version.
  15  *---------------------------------------------------------------------------------------------------------------------------------------------------
  16  */
  17
  18 #ifndef _IRMPCONFIG_H_
  19 #define _IRMPCONFIG_H_
  20
  21 #ifndef _IRMP_H_
  22 #  error please include only irmp.h, not irmpconfig.h
  23 #endif
  24
  25 /*---------------------------------------------------------------------------------------------------------------------------------------------------
  26  * Change F_INTERRUPTS if you change the number of interrupts per second,
  27  * Normally, F_INTERRUPTS should be in the range from 10000 to 15000, typical is 15000
  28  * A value above 15000 costs additional program space, absolute maximum value is 20000.
  29  * On PIC with XC8/C18 Compiler, use 15151 as the correct value.
  30  *---------------------------------------------------------------------------------------------------------------------------------------------------
  31  */
  32 #ifndef F_INTERRUPTS
  33 #  define F_INTERRUPTS                          15000   // interrupts per second, min: 10000, max: 20000, typ: 15000
  34 #endif
  35
  36 /*---------------------------------------------------------------------------------------------------------------------------------------------------
  37  * Change settings from 1 to 0 if you want to disable one or more decoders.
  38  * This saves program space.
  39  *
  40  * 1 enable  decoder
  41  * 0 disable decoder
  42  *
  43  * The standard decoders are enabled per default.
  44  * Less common protocols are disabled here, you need to enable them manually.
  45  *
  46  * If you want to use FDC or RCCAR simultaneous with RC5 protocol, additional program space is required.
  47  * If you don't need RC5 when using FDC/RCCAR, you should disable RC5.
  48  * You cannot enable both DENON and RUWIDO, only enable one of them.
  49  *---------------------------------------------------------------------------------------------------------------------------------------------------
  50  */
  51
  52 // typical protocols, disable here!             Enable  Remarks                 F_INTERRUPTS            Program Space
  53 #define IRMP_SUPPORT_SIRCS_PROTOCOL             1       // Sony SIRCS           >= 10000                 ~150 bytes
  54 #define IRMP_SUPPORT_NEC_PROTOCOL               1       // NEC + APPLE          >= 10000                 ~300 bytes
  55 #define IRMP_SUPPORT_SAMSUNG_PROTOCOL           1       // Samsung + Samsg32    >= 10000                 ~300 bytes
  56 #define IRMP_SUPPORT_KASEIKYO_PROTOCOL          1       // Kaseikyo             >= 10000                 ~250 bytes
  57
  58 // more protocols, enable here!                 Enable  Remarks                 F_INTERRUPTS            Program Space
  59 #define IRMP_SUPPORT_JVC_PROTOCOL               0       // JVC                  >= 10000                 ~150 bytes
  60 #define IRMP_SUPPORT_NEC16_PROTOCOL             0       // NEC16                >= 10000                 ~100 bytes
  61 #define IRMP_SUPPORT_NEC42_PROTOCOL             0       // NEC42                >= 10000                 ~300 bytes
  62 #define IRMP_SUPPORT_MATSUSHITA_PROTOCOL        0       // Matsushita           >= 10000                  ~50 bytes
  63 #define IRMP_SUPPORT_DENON_PROTOCOL             0       // DENON, Sharp         >= 10000                 ~250 bytes
  64 #define IRMP_SUPPORT_RC5_PROTOCOL               0       // RC5                  >= 10000                 ~250 bytes
  65 #define IRMP_SUPPORT_RC6_PROTOCOL               0       // RC6 & RC6A           >= 10000                 ~250 bytes
  66 #define IRMP_SUPPORT_IR60_PROTOCOL              0       // IR60 (SDA2008)       >= 10000                 ~300 bytes
  67 #define IRMP_SUPPORT_GRUNDIG_PROTOCOL           0       // Grundig              >= 10000                 ~300 bytes
  68 #define IRMP_SUPPORT_SIEMENS_PROTOCOL           0       // Siemens Gigaset      >= 15000                 ~550 bytes
  69 #define IRMP_SUPPORT_NOKIA_PROTOCOL             0       // Nokia                >= 10000                 ~300 bytes
  70
  71 // exotic protocols, enable here!               Enable  Remarks                 F_INTERRUPTS            Program Space
  72 #define IRMP_SUPPORT_BOSE_PROTOCOL              0       // BOSE                 >= 10000                 ~150 bytes
  73 #define IRMP_SUPPORT_KATHREIN_PROTOCOL          0       // Kathrein             >= 10000                 ~200 bytes
  74 #define IRMP_SUPPORT_NUBERT_PROTOCOL            0       // NUBERT               >= 10000                  ~50 bytes
  75 #define IRMP_SUPPORT_SPEAKER_PROTOCOL           0       // SPEAKER (~NUBERT)    >= 10000                  ~50 bytes
  76 #define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL      0       // Bang & Olufsen       >= 10000                 ~200 bytes
  77 #define IRMP_SUPPORT_RECS80_PROTOCOL            0       // RECS80 (SAA3004)     >= 15000                  ~50 bytes
  78 #define IRMP_SUPPORT_RECS80EXT_PROTOCOL         0       // RECS80EXT (SAA3008)  >= 15000                  ~50 bytes
  79 #define IRMP_SUPPORT_THOMSON_PROTOCOL           0       // Thomson              >= 10000                 ~250 bytes
  80 #define IRMP_SUPPORT_NIKON_PROTOCOL             0       // NIKON camera         >= 10000                 ~250 bytes
  81 #define IRMP_SUPPORT_NETBOX_PROTOCOL            0       // Netbox keyboard      >= 10000                 ~400 bytes (PROTOTYPE!)
  82 #define IRMP_SUPPORT_ORTEK_PROTOCOL             0       // ORTEK (Hama)         >= 10000                 ~150 bytes
  83 #define IRMP_SUPPORT_TELEFUNKEN_PROTOCOL        0       // Telefunken 1560      >= 10000                 ~150 bytes
  84 #define IRMP_SUPPORT_FDC_PROTOCOL               0       // FDC3402 keyboard     >= 10000 (better 15000)  ~150 bytes (~400 in combination with RC5)
  85 #define IRMP_SUPPORT_RCCAR_PROTOCOL             0       // RC Car               >= 10000 (better 15000)  ~150 bytes (~500 in combination with RC5)
  86 #define IRMP_SUPPORT_ROOMBA_PROTOCOL            0       // iRobot Roomba        >= 10000                 ~150 bytes
  87 #define IRMP_SUPPORT_RUWIDO_PROTOCOL            0       // RUWIDO, T-Home       >= 15000                 ~550 bytes
  88 #define IRMP_SUPPORT_A1TVBOX_PROTOCOL           0       // A1 TV BOX            >= 15000 (better 20000)  ~300 bytes
  89 #define IRMP_SUPPORT_LEGO_PROTOCOL              0       // LEGO Power RC        >= 20000                 ~150 bytes
  90 #define IRMP_SUPPORT_RCMM_PROTOCOL              0       // RCMM 12,24, or 32    >= 20000                 ~150 bytes
  91 #define IRMP_SUPPORT_LGAIR_PROTOCOL             0       // LG Air Condition     >= 10000                 ~300 bytes
  92 #define IRMP_SUPPORT_SAMSUNG48_PROTOCOL         0       // Samsung48            >= 10000                 ~100 bytes (SAMSUNG must be enabled!)
  93 #define IRMP_SUPPORT_MERLIN_PROTOCOL            0       // Merlin               >= 15000 (better 20000)  ~300 bytes
  94 #define IRMP_SUPPORT_PENTAX_PROTOCOL            0       // Pentax               >= 10000                 ~150 bytes
  95 #define IRMP_SUPPORT_RADIO1_PROTOCOL            0       // RADIO, e.g. TEVION   >= 10000                 ~250 bytes (experimental)
  96
  97 /*---------------------------------------------------------------------------------------------------------------------------------------------------
  98  * Change hardware pin here for ATMEL ATMega/ATTiny/XMega
  99  *---------------------------------------------------------------------------------------------------------------------------------------------------
 100  */
 101 #if defined (ATMEL_AVR) || defined (__AVR_XMEGA__)                      // use PB6 as IR input on AVR
 102 #  define IRMP_PORT_LETTER                      B
 103 #  define IRMP_BIT_NUMBER                       6
 104
 105 /*---------------------------------------------------------------------------------------------------------------------------------------------------
 106  * Change hardware pin here for PIC C18 or XC8 compiler
 107  *---------------------------------------------------------------------------------------------------------------------------------------------------
 108  */
 109 #elif defined (PIC_C18)                                                 // use RB4 as IR input on PIC (C18 or XC8 compiler)
 110 #  if defined(__12F1840)
 111 #    define IRMP_PIN                            RA5                     // on 12F1840 with XC8 compiler
 112 #  else
 113 #    define IRMP_PIN                            PORTBbits.RB4           // PIC C18
 114 #  endif
 115
 116 /*---------------------------------------------------------------------------------------------------------------------------------------------------
 117  * Change hardware pin here for PIC CCS compiler
 118  *---------------------------------------------------------------------------------------------------------------------------------------------------
 119  */
 120 #elif defined (PIC_CCS)
 121 #  define IRMP_PIN                              PIN_B4                  // use PB4 as IR input on PIC (CCS compiler)
 122
 123 /*---------------------------------------------------------------------------------------------------------------------------------------------------
 124  * Change hardware pin here for ARM STM32
 125  *---------------------------------------------------------------------------------------------------------------------------------------------------
 126  */
 127 #elif defined (ARM_STM32)                                               // use C13 as IR input on STM32
 128 #  define IRMP_PORT_LETTER                      C
 129 #  define IRMP_BIT_NUMBER                       13
 130
 131 /*---------------------------------------------------------------------------------------------------------------------------------------------------
 132  * Change hardware pin here for Stellaris ARM Cortex M4
 133  *---------------------------------------------------------------------------------------------------------------------------------------------------
 134  */
 135 #elif defined (STELLARIS_ARM_CORTEX_M4)                                 // use B4 as IR input on Stellaris LM4F
 136 #  define IRMP_PORT_LETTER                      B
 137 #  define IRMP_BIT_NUMBER                       4
 138
 139 /*---------------------------------------------------------------------------------------------------------------------------------------------------
 140  * Handling of unknown target system: DON'T CHANGE
 141  *---------------------------------------------------------------------------------------------------------------------------------------------------
 142  */
 143 #elif !defined (UNIX_OR_WINDOWS)
 144 #  error target system not defined.
 145 #endif
 146
 147 /*---------------------------------------------------------------------------------------------------------------------------------------------------
 148  * Set IRMP_LOGGING to 1 if want to log data to UART with 9600Bd
 149  *---------------------------------------------------------------------------------------------------------------------------------------------------
 150  */
 151 #ifndef IRMP_LOGGING
 152 #  define IRMP_LOGGING                          0       // 1: log IR signal (scan), 0: do not. default is 0
 153 #endif
 154
 155 /*---------------------------------------------------------------------------------------------------------------------------------------------------
 156  * Use external logging routines
 157  * If you enable external logging, you have also to enable IRMP_LOGGING above
 158  *---------------------------------------------------------------------------------------------------------------------------------------------------
 159  */
 160 #ifndef IRMP_EXT_LOGGING
 161 #  define IRMP_EXT_LOGGING                      0       // 1: use external logging, 0: do not. default is 0
 162 #endif
 163
 164 /*---------------------------------------------------------------------------------------------------------------------------------------------------
 165  * Set IRMP_PROTOCOL_NAMES to 1 if want to access protocol names (for logging etc), costs ~300 bytes RAM!
 166  *---------------------------------------------------------------------------------------------------------------------------------------------------
 167  */
 168 #ifndef IRMP_PROTOCOL_NAMES
 169 #  define IRMP_PROTOCOL_NAMES                   0       // 1: access protocol names, 0: do not. default is 0
 170 #endif
 171
 172 /*---------------------------------------------------------------------------------------------------------------------------------------------------
 173  * Use Callbacks to indicate input signal
 174  *---------------------------------------------------------------------------------------------------------------------------------------------------
 175  */
 176 #ifndef IRMP_USE_CALLBACK
 177 #  define IRMP_USE_CALLBACK                     0       // 1: use callbacks. 0: do not. default is 0
 178 #endif
 179
 180 #endif // _IRMPCONFIG_H_