]>
cloudbase.mooo.com Git - irmp.git/blob - irmpconfig.h
a34aebba7dd8ca81affd603c729492e17bf3d971
1 /*---------------------------------------------------------------------------------------------------------------------------------------------------
4 * Copyright (c) 2010 Frank Meyer - frank(at)fli4l.de
6 * $Id: irmpconfig.h,v 1.64 2011/03/10 12:54:37 fm Exp $
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
14 *---------------------------------------------------------------------------------------------------------------------------------------------------
17 #ifndef _IRMPCONFIG_H_
18 #define _IRMPCONFIG_H_
20 /*---------------------------------------------------------------------------------------------------------------------------------------------------
21 * Change F_INTERRUPTS if you change the number of interrupts per second,
22 * Normally, F_INTERRUPTS should be in the range from 10000 to 15000, typical is 15000
23 * A value above 15000 costs additional program space, absolute maximum value is 20000.
24 *---------------------------------------------------------------------------------------------------------------------------------------------------
27 #define F_INTERRUPTS 15000 // interrupts per second, min: 10000, max: 20000, typ: 15000
30 /*---------------------------------------------------------------------------------------------------------------------------------------------------
31 * Change settings from 1 to 0 if you want to disable one or more decoders.
32 * This saves program space.
37 * The standard decoders are enabled per default.
38 * Less common protocols are disabled here, you need to enable them manually.
40 * If you want to use FDC or RCCAR simultaneous with RC5 protocol, additional program space is required.
41 * If you don't need RC5 when using FDC/RCCAR, you should disable RC5.
42 *---------------------------------------------------------------------------------------------------------------------------------------------------
45 // typical protocols, disable here! Enable Remarks F_INTERRUPTS Program Space
46 #define IRMP_SUPPORT_SIRCS_PROTOCOL 1 // Sony SIRCS >= 10000 ~150 bytes
47 #define IRMP_SUPPORT_NEC_PROTOCOL 1 // NEC + APPLE >= 10000 ~300 bytes
48 #define IRMP_SUPPORT_SAMSUNG_PROTOCOL 1 // Samsung + Samsung32 >= 10000 ~300 bytes
49 #define IRMP_SUPPORT_MATSUSHITA_PROTOCOL 1 // Matsushita >= 10000 ~50 bytes
50 #define IRMP_SUPPORT_KASEIKYO_PROTOCOL 1 // Kaseikyo >= 10000 ~250 bytes
51 #define IRMP_SUPPORT_DENON_PROTOCOL 1 // DENON, Sharp >= 10000 ~250 bytes
53 // more protocols, enable here! Enable Remarks F_INTERRUPTS Program Space
54 #define IRMP_SUPPORT_RC5_PROTOCOL 0 // RC5 >= 10000 ~250 bytes
55 #define IRMP_SUPPORT_JVC_PROTOCOL 0 // JVC >= 10000 ~150 bytes
56 #define IRMP_SUPPORT_NEC16_PROTOCOL 0 // NEC16 >= 10000 ~50 bytes
57 #define IRMP_SUPPORT_NEC42_PROTOCOL 0 // NEC42 >= 10000 ~150 bytes
58 #define IRMP_SUPPORT_RC6_PROTOCOL 0 // RC6 & RC6A >= 10000 ~250 bytes
59 #define IRMP_SUPPORT_IR60_PROTOCOL 0 // IR60 (SAB2008) >= 10000 ~300 bytes
60 #define IRMP_SUPPORT_GRUNDIG_PROTOCOL 0 // Grundig >= 10000 ~300 bytes
61 #define IRMP_SUPPORT_NOKIA_PROTOCOL 0 // Nokia >= 10000 ~300 bytes
62 #define IRMP_SUPPORT_KATHREIN_PROTOCOL 0 // Kathrein >= 10000 ~200 bytes
63 #define IRMP_SUPPORT_NUBERT_PROTOCOL 0 // NUBERT >= 10000 ~50 bytes
64 #define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL 0 // Bang & Olufsen >= 10000 ~200 bytes
65 #define IRMP_SUPPORT_NIKON_PROTOCOL 0 // NIKON camera >= 10000 ~250 bytes
66 #define IRMP_SUPPORT_NETBOX_PROTOCOL 0 // Netbox keyboard >= 10000 ~400 bytes (PROTOTYPE!)
67 #define IRMP_SUPPORT_IMON_PROTOCOL 0 // IMON keyboard >= 10000 ~400 bytes (PROTOTYPE!)
68 #define IRMP_SUPPORT_FDC_PROTOCOL 0 // FDC3402 keyboard >= 10000 (better 15000) ~150 bytes (~400 in combination with RC5)
69 #define IRMP_SUPPORT_RCCAR_PROTOCOL 0 // RC Car >= 10000 (better 15000) ~150 bytes (~500 in combination with RC5)
70 #define IRMP_SUPPORT_SIEMENS_PROTOCOL 0 // Siemens Gigaset >= 15000 ~550 bytes
71 #define IRMP_SUPPORT_RUWIDO_PROTOCOL 0 // RUWIDO, T-Home >= 15000 ~550 bytes
72 #define IRMP_SUPPORT_RECS80_PROTOCOL 0 // RECS80 (SAA3004) >= 15000 ~50 bytes
73 #define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0 // RECS80EXT (SAA3008) >= 15000 ~50 bytes
75 /*---------------------------------------------------------------------------------------------------------------------------------------------------
76 * Change hardware pin here:
77 *---------------------------------------------------------------------------------------------------------------------------------------------------
79 #ifdef PIC_CCS_COMPILER // PIC CCS Compiler:
81 #define IRMP_PIN PIN_B4 // use PB4 as IR input on PIC
85 #define IRMP_PORT PORTB
88 #define IRMP_BIT 6 // use PB6 as IR input on AVR
90 #define input(x) ((x) & (1 << IRMP_BIT))
93 /*---------------------------------------------------------------------------------------------------------------------------------------------------
94 * Set IRMP_LOGGING to 1 if want to log data to UART with 9600Bd
95 *---------------------------------------------------------------------------------------------------------------------------------------------------
98 #define IRMP_LOGGING 0 // 1: log IR signal (scan), 0: do not (default)
101 /*---------------------------------------------------------------------------------------------------------------------------------------------------
102 * DO NOT CHANGE THE FOLLOWING LINES !
103 *---------------------------------------------------------------------------------------------------------------------------------------------------
105 #if IRMP_SUPPORT_SIEMENS_PROTOCOL == 1 && F_INTERRUPTS < 15000
106 #warning F_INTERRUPTS too low, SIEMENS protocol disabled (should be at least 15000)
107 #undef IRMP_SUPPORT_SIEMENS_PROTOCOL
108 #define IRMP_SUPPORT_SIEMENS_PROTOCOL 0
111 #if IRMP_SUPPORT_RUWIDO_PROTOCOL == 1 && F_INTERRUPTS < 15000
112 #warning F_INTERRUPTS too low, RUWIDO protocol disabled (should be at least 15000)
113 #undef IRMP_SUPPORT_RUWIDO_PROTOCOL
114 #define IRMP_SUPPORT_RUWIDO_PROTOCOL 0
117 #if IRMP_SUPPORT_RECS80_PROTOCOL == 1 && F_INTERRUPTS < 15000
118 #warning F_INTERRUPTS too low, RECS80 protocol disabled (should be at least 15000)
119 #undef IRMP_SUPPORT_RECS80_PROTOCOL
120 #define IRMP_SUPPORT_RECS80_PROTOCOL 0
123 #if IRMP_SUPPORT_RECS80EXT_PROTOCOL == 1 && F_INTERRUPTS < 15000
124 #warning F_INTERRUPTS too low, RECS80EXT protocol disabled (should be at least 15000)
125 #undef IRMP_SUPPORT_RECS80EXT_PROTOCOL
126 #define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0
129 #if IRMP_SUPPORT_JVC_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0
130 #warning JVC protocol needs also NEC protocol, NEC protocol enabled
131 #undef IRMP_SUPPORT_NEC_PROTOCOL
132 #define IRMP_SUPPORT_NEC_PROTOCOL 1
135 #if IRMP_SUPPORT_NEC16_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0
136 #warning NEC16 protocol needs also NEC protocol, NEC protocol enabled
137 #undef IRMP_SUPPORT_NEC_PROTOCOL
138 #define IRMP_SUPPORT_NEC_PROTOCOL 1
141 #if IRMP_SUPPORT_NEC42_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0
142 #warning NEC42 protocol needs also NEC protocol, NEC protocol enabled
143 #undef IRMP_SUPPORT_NEC_PROTOCOL
144 #define IRMP_SUPPORT_NEC_PROTOCOL 1
147 #if F_INTERRUPTS > 20000
148 #error F_INTERRUPTS too high (should be not greater than 20000)
151 #endif /* _WC_IRMPCONFIG_H_ */