irmpconfig.h

   1 /*---------------------------------------------------------------------------------------------------------------------------------------------------
   2  * irmpconfig.h
   3  *
   4  * Copyright (c) 2009-2011 Frank Meyer - frank(at)fli4l.de
   5  *
   6  * $Id: irmpconfig.h,v 1.82 2012/02/24 14:24:27 fm Exp $
   7  *
   8  * ATMEGA88 @ 8 MHz
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License as published by
  12  * the Free Software Foundation; either version 2 of the License, or
  13  * (at your option) any later version.
  14  *---------------------------------------------------------------------------------------------------------------------------------------------------
  15  */
  16
  17 #ifndef _IRMPCONFIG_H_
  18 #define _IRMPCONFIG_H_
  19
  20 /*---------------------------------------------------------------------------------------------------------------------------------------------------
  21  * Change F_INTERRUPTS if you change the number of interrupts per second,
  22  * Normally, F_INTERRUPTS should be in the range from 10000 to 15000, typical is 15000
  23  * A value above 15000 costs additional program space, absolute maximum value is 20000.
  24  *---------------------------------------------------------------------------------------------------------------------------------------------------
  25  */
  26 #ifndef F_INTERRUPTS
  27 #define F_INTERRUPTS                            15000   // interrupts per second, min: 10000, max: 20000, typ: 15000
  28 #endif
  29
  30 /*---------------------------------------------------------------------------------------------------------------------------------------------------
  31  * Change settings from 1 to 0 if you want to disable one or more decoders.
  32  * This saves program space.
  33  *
  34  * 1 enable  decoder
  35  * 0 disable decoder
  36  *
  37  * The standard decoders are enabled per default.
  38  * Less common protocols are disabled here, you need to enable them manually.
  39  *
  40  * If you want to use FDC or RCCAR simultaneous with RC5 protocol, additional program space is required.
  41  * If you don't need RC5 when using FDC/RCCAR, you should disable RC5.
  42  *---------------------------------------------------------------------------------------------------------------------------------------------------
  43  */
  44
  45 // typical protocols, disable here!             Enable  Remarks                 F_INTERRUPTS            Program Space
  46 #define IRMP_SUPPORT_SIRCS_PROTOCOL             1       // Sony SIRCS           >= 10000                 ~150 bytes
  47 #define IRMP_SUPPORT_NEC_PROTOCOL               1       // NEC + APPLE          >= 10000                 ~300 bytes
  48 #define IRMP_SUPPORT_SAMSUNG_PROTOCOL           1       // Samsung + Samsung32  >= 10000                 ~300 bytes
  49 #define IRMP_SUPPORT_MATSUSHITA_PROTOCOL        1       // Matsushita           >= 10000                  ~50 bytes
  50 #define IRMP_SUPPORT_KASEIKYO_PROTOCOL          1       // Kaseikyo             >= 10000                 ~250 bytes
  51 #define IRMP_SUPPORT_DENON_PROTOCOL             1       // DENON, Sharp         >= 10000                 ~250 bytes
  52
  53 // more protocols, enable here!                 Enable  Remarks                 F_INTERRUPTS            Program Space
  54 #define IRMP_SUPPORT_RC5_PROTOCOL               0       // RC5                  >= 10000                 ~250 bytes
  55 #define IRMP_SUPPORT_RC6_PROTOCOL               0       // RC6 & RC6A           >= 10000                 ~250 bytes
  56 #define IRMP_SUPPORT_JVC_PROTOCOL               0       // JVC                  >= 10000                 ~150 bytes
  57 #define IRMP_SUPPORT_NEC16_PROTOCOL             0       // NEC16                >= 10000                 ~100 bytes
  58 #define IRMP_SUPPORT_NEC42_PROTOCOL             0       // NEC42                >= 10000                 ~300 bytes
  59 #define IRMP_SUPPORT_IR60_PROTOCOL              1       // IR60 (SAB2008)       >= 10000                 ~300 bytes
  60 #define IRMP_SUPPORT_GRUNDIG_PROTOCOL           0       // Grundig              >= 10000                 ~300 bytes
  61 #define IRMP_SUPPORT_SIEMENS_PROTOCOL           0       // Siemens Gigaset      >= 15000                 ~550 bytes
  62 #define IRMP_SUPPORT_NOKIA_PROTOCOL             0       // Nokia                >= 10000                 ~300 bytes
  63
  64 // exotic protocols, enable here!               Enable  Remarks                 F_INTERRUPTS            Program Space
  65 #define IRMP_SUPPORT_KATHREIN_PROTOCOL          0       // Kathrein             >= 10000                 ~200 bytes
  66 #define IRMP_SUPPORT_NUBERT_PROTOCOL            0       // NUBERT               >= 10000                  ~50 bytes
  67 #define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL      0       // Bang & Olufsen       >= 10000                 ~200 bytes
  68 #define IRMP_SUPPORT_RECS80_PROTOCOL            0       // RECS80 (SAA3004)     >= 15000                  ~50 bytes
  69 #define IRMP_SUPPORT_RECS80EXT_PROTOCOL         0       // RECS80EXT (SAA3008)  >= 15000                  ~50 bytes
  70 #define IRMP_SUPPORT_THOMSON_PROTOCOL           0       // Thomson              >= 10000                 ~250 bytes
  71 #define IRMP_SUPPORT_NIKON_PROTOCOL             0       // NIKON camera         >= 10000                 ~250 bytes
  72 #define IRMP_SUPPORT_NETBOX_PROTOCOL            0       // Netbox keyboard      >= 10000                 ~400 bytes (PROTOTYPE!)
  73 #define IRMP_SUPPORT_FDC_PROTOCOL               0       // FDC3402 keyboard     >= 10000 (better 15000)  ~150 bytes (~400 in combination with RC5)
  74 #define IRMP_SUPPORT_RCCAR_PROTOCOL             0       // RC Car               >= 10000 (better 15000)  ~150 bytes (~500 in combination with RC5)
  75 #define IRMP_SUPPORT_RUWIDO_PROTOCOL            0       // RUWIDO, T-Home       >= 15000                 ~550 bytes
  76 #define IRMP_SUPPORT_LEGO_PROTOCOL              0       // LEGO Power RC        >= 20000                 ~150 bytes
  77
  78 /*---------------------------------------------------------------------------------------------------------------------------------------------------
  79  * Change hardware pin here:
  80  *---------------------------------------------------------------------------------------------------------------------------------------------------
  81  */
  82 #if defined (PIC_C18)                                                   // Microchip C18 Compiler
  83 #include <p18cxxx.h>                                                    // main PIC18 h file
  84 #define IRMP_PIN                                PORTBbits.RB4           // use RB4 as IR input on PIC
  85 #define input(x)                                (x)
  86
  87 #elif defined (PIC_CCS_COMPILER)                                        // PIC CCS Compiler:
  88 #define IRMP_PIN                                PIN_B4                  // use PB4 as IR input on PIC
  89
  90 #else                                                                   // AVR:
  91 #define IRMP_PORT                               PORTB
  92 #define IRMP_DDR                                DDRB
  93 #define IRMP_PIN                                PINB
  94 #define IRMP_BIT                                6                       // use PB6 as IR input on AVR
  95 #define input(x)                                ((x) & (1 << IRMP_BIT))
  96 #endif
  97
  98 /*---------------------------------------------------------------------------------------------------------------------------------------------------
  99  * Set IRMP_LOGGING to 1 if want to log data to UART with 9600Bd
 100  *---------------------------------------------------------------------------------------------------------------------------------------------------
 101  */
 102 #ifndef IRMP_LOGGING
 103 #define IRMP_LOGGING                            0       // 1: log IR signal (scan), 0: do not (default)
 104 #endif
 105
 106 /*---------------------------------------------------------------------------------------------------------------------------------------------------
 107  * Use external logging routines
 108  * If you enable external logging, you have also to enable IRMP_LOGGING above
 109  *---------------------------------------------------------------------------------------------------------------------------------------------------
 110  */
 111 #ifndef IRMP_EXT_LOGGING
 112 #define IRMP_EXT_LOGGING                        0       // 1:log, 0: do not log  ;
 113 #endif
 114
 115 /*---------------------------------------------------------------------------------------------------------------------------------------------------
 116  * Set IRMP_PROTOCOL_NAMES to 1 if want to access protocol names (for logging etc), costs ~300 bytes RAM!
 117  *---------------------------------------------------------------------------------------------------------------------------------------------------
 118  */
 119 #define IRMP_PROTOCOL_NAMES                     0       // 1: access protocol names, 0: do not (default),
 120
 121 /*---------------------------------------------------------------------------------------------------------------------------------------------------
 122  * Use Callbacks to indicate input signal
 123  *---------------------------------------------------------------------------------------------------------------------------------------------------
 124  */
 125 #define IRMP_USE_CALLBACK                       0       // flag: 0 = don't use callbacks, 1 = use callbacks, default is 0
 126
 127 /*---------------------------------------------------------------------------------------------------------------------------------------------------
 128  * DO NOT CHANGE THE FOLLOWING LINES !
 129  *---------------------------------------------------------------------------------------------------------------------------------------------------
 130  */
 131 #if IRMP_SUPPORT_SIEMENS_PROTOCOL == 1 && F_INTERRUPTS < 15000
 132 #  warning F_INTERRUPTS too low, SIEMENS protocol disabled (should be at least 15000)
 133 #  undef IRMP_SUPPORT_SIEMENS_PROTOCOL
 134 #  define IRMP_SUPPORT_SIEMENS_PROTOCOL         0
 135 #endif
 136
 137 #if IRMP_SUPPORT_RUWIDO_PROTOCOL == 1 && F_INTERRUPTS < 15000
 138 #  warning F_INTERRUPTS too low, RUWIDO protocol disabled (should be at least 15000)
 139 #  undef IRMP_SUPPORT_RUWIDO_PROTOCOL
 140 #  define IRMP_SUPPORT_RUWIDO_PROTOCOL          0
 141 #endif
 142
 143 #if IRMP_SUPPORT_RECS80_PROTOCOL == 1 && F_INTERRUPTS < 15000
 144 #  warning F_INTERRUPTS too low, RECS80 protocol disabled (should be at least 15000)
 145 #  undef IRMP_SUPPORT_RECS80_PROTOCOL
 146 #  define IRMP_SUPPORT_RECS80_PROTOCOL          0
 147 #endif
 148
 149 #if IRMP_SUPPORT_RECS80EXT_PROTOCOL == 1 && F_INTERRUPTS < 15000
 150 #  warning F_INTERRUPTS too low, RECS80EXT protocol disabled (should be at least 15000)
 151 #  undef IRMP_SUPPORT_RECS80EXT_PROTOCOL
 152 #  define IRMP_SUPPORT_RECS80EXT_PROTOCOL       0
 153 #endif
 154
 155 #if IRMP_SUPPORT_LEGO_PROTOCOL == 1 && F_INTERRUPTS < 20000
 156 #  warning F_INTERRUPTS too low, LEGO protocol disabled (should be at least 20000)
 157 #  undef IRMP_SUPPORT_LEGO_PROTOCOL
 158 #  define IRMP_SUPPORT_LEGO_PROTOCOL            0
 159 #endif
 160
 161 #if IRMP_SUPPORT_JVC_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0
 162 #  warning JVC protocol needs also NEC protocol, NEC protocol enabled
 163 #  undef IRMP_SUPPORT_NEC_PROTOCOL
 164 #  define IRMP_SUPPORT_NEC_PROTOCOL             1
 165 #endif
 166
 167 #if IRMP_SUPPORT_NEC16_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0
 168 #  warning NEC16 protocol needs also NEC protocol, NEC protocol enabled
 169 #  undef IRMP_SUPPORT_NEC_PROTOCOL
 170 #  define IRMP_SUPPORT_NEC_PROTOCOL             1
 171 #endif
 172
 173 #if IRMP_SUPPORT_NEC42_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0
 174 #  warning NEC42 protocol needs also NEC protocol, NEC protocol enabled
 175 #  undef IRMP_SUPPORT_NEC_PROTOCOL
 176 #  define IRMP_SUPPORT_NEC_PROTOCOL             1
 177 #endif
 178
 179 #if F_INTERRUPTS > 20000
 180 #error F_INTERRUPTS too high (should be not greater than 20000)
 181 #endif
 182
 183 #endif /* _WC_IRMPCONFIG_H_ */