]>
cloudbase.mooo.com Git - irmp.git/blob - irmp.h
1 /*---------------------------------------------------------------------------------------------------------------------------------------------------
4 * Copyright (c) 2009-2010 Frank Meyer - frank(at)fli4l.de
6 * $Id: irmp.h,v 1.39 2010/06/25 13:18:36 fm Exp $
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
14 *---------------------------------------------------------------------------------------------------------------------------------------------------
25 /*---------------------------------------------------------------------------------------------------------------------------------------------------
27 *---------------------------------------------------------------------------------------------------------------------------------------------------
29 #define IRMP_SIRCS_PROTOCOL 1 // Sony
30 #define IRMP_NEC_PROTOCOL 2 // NEC, Pioneer, JVC, Toshiba, NoName etc.
31 #define IRMP_SAMSUNG_PROTOCOL 3 // Samsung
32 #define IRMP_MATSUSHITA_PROTOCOL 4 // Matsushita
33 #define IRMP_KASEIKYO_PROTOCOL 5 // Kaseikyo (Panasonic etc)
34 #define IRMP_RECS80_PROTOCOL 6 // Philips, Thomson, Nordmende, Telefunken, Saba
35 #define IRMP_RC5_PROTOCOL 7 // Philips etc
36 #define IRMP_DENON_PROTOCOL 8 // Denon
37 #define IRMP_RC6_PROTOCOL 9 // Philips etc
38 #define IRMP_SAMSUNG32_PROTOCOL 10 // Samsung32: no sync pulse at bit 16, length 32 instead of 37
39 #define IRMP_APPLE_PROTOCOL 11 // Apple, very similar to NEC
40 #define IRMP_RECS80EXT_PROTOCOL 12 // Philips, Technisat, Thomson, Nordmende, Telefunken, Saba
41 #define IRMP_NUBERT_PROTOCOL 13 // Nubert
42 #define IRMP_BANG_OLUFSEN_PROTOCOL 14 // Bang & Olufsen
43 #define IRMP_GRUNDIG_PROTOCOL 15 // Grundig
44 #define IRMP_NOKIA_PROTOCOL 16 // Nokia
45 #define IRMP_SIEMENS_PROTOCOL 17 // Siemens, e.g. Gigaset
46 #define IRMP_FDC_PROTOCOL 18 // FDC keyboard
47 #define IRMP_RCCAR_PROTOCOL 19 // RC Car
49 // some flags of struct IRMP_PARAMETER:
50 #define IRMP_PARAM_FLAG_IS_MANCHESTER 0x01
51 #define IRMP_PARAM_FLAG_1ST_PULSE_IS_1 0x02
53 #define SIRCS_START_BIT_PULSE_TIME 2400.0e-6 // 2400 usec pulse
54 #define SIRCS_START_BIT_PAUSE_TIME 600.0e-6 // 600 usec pause
55 #define SIRCS_1_PULSE_TIME 1200.0e-6 // 1200 usec pulse
56 #define SIRCS_0_PULSE_TIME 600.0e-6 // 600 usec pulse
57 #define SIRCS_PAUSE_TIME 600.0e-6 // 600 usec pause
58 #define SIRCS_FRAMES 3 // SIRCS sends each frame 3 times
59 #define SIRCS_AUTO_REPETITION_PAUSE_TIME 25.0e-3 // auto repetition after 25ms
60 #define SIRCS_FRAME_REPEAT_PAUSE_TIME 25.0e-3 // frame repeat after 25ms
61 #define SIRCS_ADDRESS_OFFSET 15 // skip 15 bits
62 #define SIRCS_ADDRESS_LEN 5 // read up to 5 address bits
63 #define SIRCS_COMMAND_OFFSET 0 // skip 0 bits
64 #define SIRCS_COMMAND_LEN 15 // read 12-15 command bits
65 #define SIRCS_MINIMUM_DATA_LEN 12 // minimum data length
66 #define SIRCS_COMPLETE_DATA_LEN 20 // complete length - may be up to 20
67 #define SIRCS_STOP_BIT 0 // has no stop bit
68 #define SIRCS_LSB 1 // LSB...MSB
69 #define SIRCS_FLAGS 0 // flags
71 #define NEC_START_BIT_PULSE_TIME 9000.0e-6 // 9000 usec pulse
72 #define NEC_START_BIT_PAUSE_TIME 4500.0e-6 // 4500 usec pause
73 #define NEC_REPEAT_START_BIT_PAUSE_TIME 2250.0e-6 // 2250 usec pause
74 #define NEC_PULSE_TIME 560.0e-6 // 560 usec pulse
75 #define NEC_1_PAUSE_TIME 1690.0e-6 // 1690 usec pause
76 #define NEC_0_PAUSE_TIME 560.0e-6 // 560 usec pause
77 #define NEC_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms
78 #define NEC_ADDRESS_OFFSET 0 // skip 0 bits
79 #define NEC_ADDRESS_LEN 16 // read 16 address bits
80 #define NEC_COMMAND_OFFSET 16 // skip 16 bits (8 address + 8 /address)
81 #define NEC_COMMAND_LEN 16 // read 16 bits (8 command + 8 /command)
82 #define NEC_COMPLETE_DATA_LEN 32 // complete length
83 #define NEC_STOP_BIT 1 // has stop bit
84 #define NEC_LSB 1 // LSB...MSB
85 #define NEC_FLAGS 0 // flags
87 #define SAMSUNG_START_BIT_PULSE_TIME 4500.0e-6 // 4500 usec pulse
88 #define SAMSUNG_START_BIT_PAUSE_TIME 4500.0e-6 // 4500 usec pause
89 #define SAMSUNG_PULSE_TIME 550.0e-6 // 550 usec pulse
90 #define SAMSUNG_1_PAUSE_TIME 1450.0e-6 // 1450 usec pause
91 #define SAMSUNG_0_PAUSE_TIME 450.0e-6 // 450 usec pause
92 #define SAMSUNG_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
93 #define SAMSUNG_ADDRESS_OFFSET 0 // skip 0 bits
94 #define SAMSUNG_ADDRESS_LEN 16 // read 16 address bits
95 #define SAMSUNG_ID_OFFSET 17 // skip 16 + 1 sync bit
96 #define SAMSUNG_ID_LEN 4 // read 4 id bits
97 #define SAMSUNG_COMMAND_OFFSET 21 // skip 16 + 1 sync + 4 data bits
98 #define SAMSUNG_COMMAND_LEN 16 // read 16 command bits
99 #define SAMSUNG_COMPLETE_DATA_LEN 37 // complete length
100 #define SAMSUNG_STOP_BIT 1 // has stop bit
101 #define SAMSUNG_LSB 1 // LSB...MSB?
102 #define SAMSUNG_FLAGS 0 // flags
104 #define SAMSUNG32_COMMAND_OFFSET 16 // skip 16 bits
105 #define SAMSUNG32_COMMAND_LEN 16 // read 16 command bits
106 #define SAMSUNG32_COMPLETE_DATA_LEN 32 // complete length
107 #define SAMSUNG32_FRAMES 2 // SAMSUNG32 sends each frame 2 times
108 #define SAMSUNG32_AUTO_REPETITION_PAUSE_TIME 47.0e-3 // repetition after 47 ms
109 #define SAMSUNG32_FRAME_REPEAT_PAUSE_TIME 47.0e-3 // frame repeat after 40ms
111 #define MATSUSHITA_START_BIT_PULSE_TIME 3488.0e-6 // 3488 usec pulse
112 #define MATSUSHITA_START_BIT_PAUSE_TIME 3488.0e-6 // 3488 usec pause
113 #define MATSUSHITA_PULSE_TIME 872.0e-6 // 872 usec pulse
114 #define MATSUSHITA_1_PAUSE_TIME 2616.0e-6 // 2616 usec pause
115 #define MATSUSHITA_0_PAUSE_TIME 872.0e-6 // 872 usec pause
116 #define MATSUSHITA_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
117 #define MATSUSHITA_ADDRESS_OFFSET 12 // skip 12 bits
118 #define MATSUSHITA_ADDRESS_LEN 12 // read 12 address bits
119 #define MATSUSHITA_COMMAND_OFFSET 0 // skip 0 bits
120 #define MATSUSHITA_COMMAND_LEN 12 // read 12 bits (6 custom + 6 command)
121 #define MATSUSHITA_COMPLETE_DATA_LEN 24 // complete length
122 #define MATSUSHITA_STOP_BIT 1 // has stop bit
123 #define MATSUSHITA_LSB 1 // LSB...MSB?
124 #define MATSUSHITA_FLAGS 0 // flags
126 #define KASEIKYO_START_BIT_PULSE_TIME 3380.0e-6 // 3380 usec pulse
127 #define KASEIKYO_START_BIT_PAUSE_TIME 1690.0e-6 // 1690 usec pause
128 #define KASEIKYO_PULSE_TIME 423.0e-6 // 525 usec pulse
129 #define KASEIKYO_1_PAUSE_TIME 1269.0e-6 // 525 usec pause
130 #define KASEIKYO_0_PAUSE_TIME 423.0e-6 // 1690 usec pause
131 #define KASEIKYO_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
132 #define KASEIKYO_ADDRESS_OFFSET 0 // skip 0 bits
133 #define KASEIKYO_ADDRESS_LEN 16 // read 16 address bits
134 #define KASEIKYO_COMMAND_OFFSET 28 // skip 28 bits (16 manufacturer & 4 parity & 8 genre)
135 #define KASEIKYO_COMMAND_LEN 12 // read 12 command bits (10 real command & 2 id)
136 #define KASEIKYO_COMPLETE_DATA_LEN 48 // complete length
137 #define KASEIKYO_STOP_BIT 1 // has stop bit
138 #define KASEIKYO_LSB 1 // LSB...MSB?
139 #define KASEIKYO_FLAGS 0 // flags
141 #define RECS80_START_BIT_PULSE_TIME 158.0e-6 // 158 usec pulse
142 #define RECS80_START_BIT_PAUSE_TIME 7432.0e-6 // 7432 usec pause
143 #define RECS80_PULSE_TIME 158.0e-6 // 158 usec pulse
144 #define RECS80_1_PAUSE_TIME 7432.0e-6 // 7432 usec pause
145 #define RECS80_0_PAUSE_TIME 4902.0e-6 // 4902 usec pause
146 #define RECS80_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
147 #define RECS80_ADDRESS_OFFSET 2 // skip 2 bits (2nd start + 1 toggle)
148 #define RECS80_ADDRESS_LEN 3 // read 3 address bits
149 #define RECS80_COMMAND_OFFSET 5 // skip 5 bits (2nd start + 1 toggle + 3 address)
150 #define RECS80_COMMAND_LEN 6 // read 6 command bits
151 #define RECS80_COMPLETE_DATA_LEN 11 // complete length
152 #define RECS80_STOP_BIT 1 // has stop bit
153 #define RECS80_LSB 0 // MSB...LSB
154 #define RECS80_FLAGS 0 // flags
156 #define RC5_BIT_TIME 889.0e-6 // 889 usec pulse/pause
157 #define RC5_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
158 #define RC5_ADDRESS_OFFSET 2 // skip 2 bits (2nd start + 1 toggle)
159 #define RC5_ADDRESS_LEN 5 // read 5 address bits
160 #define RC5_COMMAND_OFFSET 7 // skip 5 bits (2nd start + 1 toggle + 5 address)
161 #define RC5_COMMAND_LEN 6 // read 6 command bits
162 #define RC5_COMPLETE_DATA_LEN 13 // complete length
163 #define RC5_STOP_BIT 0 // has no stop bit
164 #define RC5_LSB 0 // MSB...LSB
165 #define RC5_FLAGS IRMP_PARAM_FLAG_IS_MANCHESTER // flags
167 #define DENON_PULSE_TIME 275.0e-6 // 275 usec pulse
168 #define DENON_1_PAUSE_TIME 1900.0e-6 // 1900 usec pause
169 #define DENON_0_PAUSE_TIME 775.0e-6 // 775 usec pause
170 #define DENON_FRAMES 2 // DENON sends each frame 2 times
171 #define DENON_AUTO_REPETITION_PAUSE_TIME 65.0e-3 // inverted repetition after 65ms
172 #define DENON_FRAME_REPEAT_PAUSE_TIME 65.0e-3 // frame repeat after 65ms
173 #define DENON_ADDRESS_OFFSET 0 // skip 0 bits
174 #define DENON_ADDRESS_LEN 5 // read 5 address bits
175 #define DENON_COMMAND_OFFSET 5 // skip 5
176 #define DENON_COMMAND_LEN 10 // read 10 command bits
177 #define DENON_COMPLETE_DATA_LEN 15 // complete length
178 #define DENON_STOP_BIT 1 // has stop bit
179 #define DENON_LSB 0 // MSB...LSB
180 #define DENON_FLAGS 0 // flags
182 #define RC6_START_BIT_PULSE_TIME 2666.0e-6 // 2.666 msec pulse
183 #define RC6_START_BIT_PAUSE_TIME 889.0e-6 // 889 usec pause
184 #define RC6_TOGGLE_BIT_TIME 889.0e-6 // 889 msec pulse/pause
185 #define RC6_BIT_TIME 444.0e-6 // 889 usec pulse/pause
186 #define RC6_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
187 #define RC6_ADDRESS_OFFSET 5 // skip "1" + 3 mode bits + 1 toggle bit
188 #define RC6_ADDRESS_LEN 8 // read 8 address bits
189 #define RC6_COMMAND_OFFSET 13 // skip 12 bits ("1" + 3 mode + 1 toggle + 8 address)
190 #define RC6_COMMAND_LEN 8 // read 8 command bits
191 #define RC6_COMPLETE_DATA_LEN_SHORT 21 // complete length
192 #define RC6_COMPLETE_DATA_LEN_LONG 36 // complete length
193 #define RC6_STOP_BIT 0 // has no stop bit
194 #define RC6_LSB 0 // MSB...LSB
195 #define RC6_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags
197 #define RECS80EXT_START_BIT_PULSE_TIME 158.0e-6 // 158 usec pulse
198 #define RECS80EXT_START_BIT_PAUSE_TIME 3637.0e-6 // 3637 usec pause
199 #define RECS80EXT_PULSE_TIME 158.0e-6 // 158 usec pulse
200 #define RECS80EXT_1_PAUSE_TIME 7432.0e-6 // 7432 usec pause
201 #define RECS80EXT_0_PAUSE_TIME 4902.0e-6 // 4902 usec pause
202 #define RECS80EXT_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
203 #define RECS80EXT_ADDRESS_OFFSET 2 // skip 2 bits (2nd start + 1 toggle)
204 #define RECS80EXT_ADDRESS_LEN 4 // read 3 address bits
205 #define RECS80EXT_COMMAND_OFFSET 6 // skip 6 bits (2nd start + 1 toggle + 4 address)
206 #define RECS80EXT_COMMAND_LEN 6 // read 6 command bits
207 #define RECS80EXT_COMPLETE_DATA_LEN 12 // complete length
208 #define RECS80EXT_STOP_BIT 1 // has stop bit
209 #define RECS80EXT_LSB 0 // MSB...LSB
210 #define RECS80EXT_FLAGS 0 // flags
212 #define NUBERT_START_BIT_PULSE_TIME 1340.0e-6 // 1340 usec pulse
213 #define NUBERT_START_BIT_PAUSE_TIME 340.0e-6 // 340 usec pause
214 #define NUBERT_1_PULSE_TIME 1340.0e-6 // 1340 usec pulse
215 #define NUBERT_1_PAUSE_TIME 340.0e-6 // 340 usec pause
216 #define NUBERT_0_PULSE_TIME 500.0e-6 // 500 usec pulse
217 #define NUBERT_0_PAUSE_TIME 1300.0e-6 // 1300 usec pause
218 #define NUBERT_FRAMES 2 // Nubert sends 2 frames
219 #define NUBERT_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // auto repetition after 35ms
220 #define NUBERT_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 45ms
221 #define NUBERT_ADDRESS_OFFSET 0 // skip 0 bits
222 #define NUBERT_ADDRESS_LEN 0 // read 0 address bits
223 #define NUBERT_COMMAND_OFFSET 0 // skip 0 bits
224 #define NUBERT_COMMAND_LEN 10 // read 10 bits
225 #define NUBERT_COMPLETE_DATA_LEN 10 // complete length
226 #define NUBERT_STOP_BIT 1 // has stop bit
227 #define NUBERT_LSB 0 // MSB?
228 #define NUBERT_FLAGS 0 // flags
230 #define BANG_OLUFSEN_START_BIT1_PULSE_TIME 200.0e-6 // 200 usec pulse
231 #define BANG_OLUFSEN_START_BIT1_PAUSE_TIME 3125.0e-6 // 3125 usec pause
232 #define BANG_OLUFSEN_START_BIT2_PULSE_TIME 200.0e-6 // 200 usec pulse
233 #define BANG_OLUFSEN_START_BIT2_PAUSE_TIME 3125.0e-6 // 3125 usec pause
234 #define BANG_OLUFSEN_START_BIT3_PULSE_TIME 200.0e-6 // 200 usec pulse
235 #define BANG_OLUFSEN_START_BIT3_PAUSE_TIME 15625.0e-6 // 15625 usec pause
236 #define BANG_OLUFSEN_START_BIT4_PULSE_TIME 200.0e-6 // 200 usec pulse
237 #define BANG_OLUFSEN_START_BIT4_PAUSE_TIME 3125.0e-6 // 3125 usec pause
238 #define BANG_OLUFSEN_PULSE_TIME 200.0e-6 // 200 usec pulse
239 #define BANG_OLUFSEN_1_PAUSE_TIME 9375.0e-6 // 9375 usec pause
240 #define BANG_OLUFSEN_0_PAUSE_TIME 3125.0e-6 // 3125 usec pause
241 #define BANG_OLUFSEN_R_PAUSE_TIME 6250.0e-6 // 6250 usec pause (repeat last bit)
242 #define BANG_OLUFSEN_TRAILER_BIT_PAUSE_TIME 12500.0e-6 // 12500 usec pause (trailer bit)
243 #define BANG_OLUFSEN_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
244 #define BANG_OLUFSEN_ADDRESS_OFFSET 0 // no address bits
245 #define BANG_OLUFSEN_ADDRESS_LEN 0 // no address bits
246 #define BANG_OLUFSEN_COMMAND_OFFSET 3 // skip startbits 2, 3, 4
247 #define BANG_OLUFSEN_COMMAND_LEN 16 // read 16 command bits
248 #define BANG_OLUFSEN_COMPLETE_DATA_LEN 20 // complete length: startbits 2, 3, 4 + 16 data bits + trailer bit
249 #define BANG_OLUFSEN_STOP_BIT 1 // has stop bit
250 #define BANG_OLUFSEN_LSB 0 // MSB...LSB
251 #define BANG_OLUFSEN_FLAGS 0 // flags
253 #define GRUNDIG_OR_NOKIA_BIT_TIME 528.0e-6 // 528 usec pulse/pause
254 #define GRUNDIG_OR_NOKIA_PRE_PAUSE_TIME 2639.0e-6 // 2639 usec pause after pre bit
255 #define GRUNDIG_OR_NOKIA_FRAME_REPEAT_PAUSE_TIME 117.76e-3 // info frame repeat after 117.76 ms
256 #define GRUNDIG_OR_NOKIA_STOP_BIT 0 // has no stop bit
257 #define GRUNDIG_OR_NOKIA_LSB 1 // MSB...LSB
258 #define GRUNDIG_OR_NOKIA_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags
260 #define GRUNDIG_FRAMES 2 // GRUNDIG sends each frame 1+1 times
261 #define GRUNDIG_AUTO_REPETITION_PAUSE_TIME 20.0e-3 // repetition after 20ms
262 #define GRUNDIG_ADDRESS_OFFSET 0 // no address
263 #define GRUNDIG_ADDRESS_LEN 0 // no address
264 #define GRUNDIG_COMMAND_OFFSET 1 // skip 1 start bit
265 #define GRUNDIG_COMMAND_LEN 9 // read 9 command bits
266 #define GRUNDIG_COMPLETE_DATA_LEN 10 // complete length: 1 start bit + 9 data bits
268 #define NOKIA_FRAMES 3 // NOKIA sends each frame 1 + 1 + 1 times
269 #define NOKIA_AUTO_REPETITION_PAUSE_TIME 20.0e-3 // repetition after 20ms
270 #define NOKIA_ADDRESS_OFFSET 9 // skip 9 bits (1 start bit + 8 data bits)
271 #define NOKIA_ADDRESS_LEN 8 // 7 address bits
272 #define NOKIA_COMMAND_OFFSET 1 // skip 1 bit (1 start bit)
273 #define NOKIA_COMMAND_LEN 8 // read 8 command bits
274 #define NOKIA_COMPLETE_DATA_LEN 17 // complete length: 1 start bit + 8 address bits + 8 command bits
276 #define SIEMENS_BIT_TIME 250.0e-6 // 250 usec pulse/pause
277 #define SIEMENS_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
278 #define SIEMENS_ADDRESS_OFFSET 2 // skip 2 start bits
279 #define SIEMENS_ADDRESS_LEN 12 // read 12 address bits
280 #define SIEMENS_COMMAND_OFFSET 15 // skip 15 bits (2 start bits + 12 address bits + 1 inverted bit)
281 #define SIEMENS_COMMAND_LEN 7 // read 7 command bits
282 #define SIEMENS_COMPLETE_DATA_LEN 23 // complete length
283 #define SIEMENS_STOP_BIT 0 // has no stop bit
284 #define SIEMENS_LSB 0 // MSB...LSB
285 #define SIEMENS_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags
287 #define FDC_START_BIT_PULSE_TIME 2085.0e-6 // 2085 usec pulse
288 #define FDC_START_BIT_PAUSE_TIME 966.0e-6 // 966 usec pause
289 #define FDC_PULSE_TIME 300.0e-6 // 300 usec pulse
290 #define FDC_1_PAUSE_TIME 715.0e-6 // 715 usec pause
291 #define FDC_0_PAUSE_TIME 220.0e-6 // 220 usec pause
292 #define FDC_FRAME_REPEAT_PAUSE_TIME 60.0e-3 // frame repeat after 60ms
293 #define FDC_ADDRESS_OFFSET 0 // skip 0 bits
294 #define FDC_ADDRESS_LEN 14 // read 14 address bits, but use only 6, shift 8 into command
295 #define FDC_COMMAND_OFFSET 20 // skip 20 bits
296 #define FDC_COMMAND_LEN 12 // read 12 bits
297 #define FDC_COMPLETE_DATA_LEN 40 // complete length
298 #define FDC_STOP_BIT 1 // has stop bit
299 #define FDC_LSB 1 // LSB...MSB
300 #define FDC_FLAGS 0 // flags
302 #define RCCAR_START_BIT_PULSE_TIME 2000.0e-6 // 2000 usec pulse
303 #define RCCAR_START_BIT_PAUSE_TIME 2000.0e-6 // 2000 usec pause
304 #define RCCAR_PULSE_TIME 600.0e-6 // 360 usec pulse
305 #define RCCAR_1_PAUSE_TIME 450.0e-6 // 650 usec pause
306 #define RCCAR_0_PAUSE_TIME 900.0e-6 // 180 usec pause
307 #define RCCAR_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms
308 #define RCCAR_ADDRESS_OFFSET 0 // skip 0 bits
309 #define RCCAR_ADDRESS_LEN 0 // read 0 address bits
310 #define RCCAR_COMMAND_OFFSET 0 // skip 0 bits
311 #define RCCAR_COMMAND_LEN 13 // read 13 bits
312 #define RCCAR_COMPLETE_DATA_LEN 13 // complete length
313 #define RCCAR_STOP_BIT 1 // has stop bit
314 #define RCCAR_LSB 1 // LSB...MSB
315 #define RCCAR_FLAGS 0 // flags
317 #define AUTO_FRAME_REPETITION_TIME 50.0e-3 // SIRCS/SAMSUNG32/NUBERT: automatic repetition after 25-50ms
322 #define IRMP_FLAG_REPETITION 0x01
326 uint8_t protocol
; // protocol, i.e. NEC_PROTOCOL
327 uint16_t address
; // address
328 uint16_t command
; // command
329 uint8_t flags
; // flags, e.g. repetition
334 * Initialize IRMP decoder
335 * @details Configures IRMP input pin
337 extern void irmp_init (void);
341 * @details gets decoded IRMP data
342 * @param pointer in order to store IRMP data
343 * @return TRUE: successful, FALSE: failed
345 extern uint8_t irmp_get_data (IRMP_DATA
*);
349 * @details ISR routine, called 10000 times per second
351 extern uint8_t irmp_ISR (void);
357 #endif /* _WC_IRMP_H_ */