]>
cloudbase.mooo.com Git - irmp.git/blob - irmpconfig.h
1 /*---------------------------------------------------------------------------------------------------------------------------------------------------
4 * Copyright (c) 2010 Frank Meyer - frank(at)fli4l.de
6 * $Id: irmpconfig.h,v 1.34 2010/06/26 18:11:08 fm Exp $
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
14 *---------------------------------------------------------------------------------------------------------------------------------------------------
17 #ifndef _IRMPCONFIG_H_
18 #define _IRMPCONFIG_H_
20 /*---------------------------------------------------------------------------------------------------------------------------------------------------
21 * Change F_INTERRUPTS if you change the number of interrupts per second,
22 * Normally, F_INTERRUPTS should be in the range from 10000 to 15000.
23 * A value above 15000 costs additional program space, absolut maximum value is 20000.
24 *---------------------------------------------------------------------------------------------------------------------------------------------------
27 #define F_INTERRUPTS 10000 // interrupts per second, min: 10000, max: 15000
30 /*---------------------------------------------------------------------------------------------------------------------------------------------------
31 * Change settings from 1 to 0 if you want to disable one or more decoders.
32 * This saves program space.
37 * The standard decoders are enabled per default.
38 * Some less common protocols are disabled here, you need to enable them manually.
40 * If you want to use FDC or RCCAR simultaneous with RC5 protocol, additional program space is required.
41 * If you don't need RC5 when using FDC/RCCAR, you should disable RC5.
42 *---------------------------------------------------------------------------------------------------------------------------------------------------
45 // Protocol Enable Remarks F_INTERRUPTS Program Space
46 #define IRMP_SUPPORT_SIRCS_PROTOCOL 1 // Sony SIRCS >= 10000 ~100 bytes
47 #define IRMP_SUPPORT_NEC_PROTOCOL 1 // NEC + APPLE >= 10000 ~250 bytes
48 #define IRMP_SUPPORT_SAMSUNG_PROTOCOL 1 // Samsung + Samsung32 >= 10000 ~250 bytes
49 #define IRMP_SUPPORT_MATSUSHITA_PROTOCOL 1 // Matsushita >= 10000 ~50 bytes
50 #define IRMP_SUPPORT_KASEIKYO_PROTOCOL 1 // support Kaseikyo >= 10000 ~50 bytes
51 #define IRMP_SUPPORT_DENON_PROTOCOL 1 // support DENON >= 10000 ~250 bytes
52 #define IRMP_SUPPORT_RC5_PROTOCOL 0 // RC5 >= 10000 ~250 bytes
53 #define IRMP_SUPPORT_RC6_PROTOCOL 0 // RC6 >= 10000 ~200 bytes
54 #define IRMP_SUPPORT_GRUNDIG_PROTOCOL 0 // Grundig >= 10000 ~150 bytes
55 #define IRMP_SUPPORT_NOKIA_PROTOCOL 0 // Nokia >= 10000 ~150 bytes
56 #define IRMP_SUPPORT_NUBERT_PROTOCOL 0 // NUBERT >= 10000 ~50 bytes
57 #define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL 0 // Bang & Olufsen >= 10000 ~200 bytes
58 #define IRMP_SUPPORT_FDC_PROTOCOL 0 // FDC3402 keyboard >= 10000 (better 15000) ~50 bytes (~400 in combination with RC5)
59 #define IRMP_SUPPORT_RCCAR_PROTOCOL 0 // RC Car >= 10000 (better 15000) ~150 bytes (~500 in combination with RC5)
60 #define IRMP_SUPPORT_SIEMENS_PROTOCOL 0 // Siemens Gigaset >= 15000 ~150 bytes
61 #define IRMP_SUPPORT_RECS80_PROTOCOL 0 // RECS80 >= 20000 ~50 bytes
62 #define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0 // RECS80EXT >= 20000 ~50 bytes
64 /*---------------------------------------------------------------------------------------------------------------------------------------------------
65 * Change hardware pin here:
66 *---------------------------------------------------------------------------------------------------------------------------------------------------
68 #ifdef PIC_CCS_COMPILER // PIC CCS Compiler:
70 #define IRMP_PIN PIN_B4 // use PB4 as IR input on PIC
74 #define IRMP_PORT PORTB
77 #define IRMP_BIT 6 // use PB6 as IR input on AVR
79 #define input(x) ((x) & (1 << IRMP_BIT))
82 /*---------------------------------------------------------------------------------------------------------------------------------------------------
83 * Set IRMP_LOGGING to 1 if want to log data to UART with 9600Bd
84 *---------------------------------------------------------------------------------------------------------------------------------------------------
87 #define IRMP_LOGGING 0 // 1: log IR signal (scan), 0: do not (default)
90 #if IRMP_SUPPORT_SIEMENS_PROTOCOL == 1 && F_INTERRUPTS < 15000
91 #warning F_INTERRUPTS too low, SIEMENS protocol disabled (should be at least 15000)
92 #undef IRMP_SUPPORT_SIEMENS_PROTOCOL
93 #define IRMP_SUPPORT_SIEMENS_PROTOCOL 0
96 #if IRMP_SUPPORT_RECS80_PROTOCOL == 1 && F_INTERRUPTS < 20000
97 #warning F_INTERRUPTS too low, RECS80 protocol disabled (should be at least 20000)
98 #undef IRMP_SUPPORT_RECS80_PROTOCOL
99 #define IRMP_SUPPORT_RECS80_PROTOCOL 0
102 #if IRMP_SUPPORT_RECS80EXT_PROTOCOL == 1 && F_INTERRUPTS < 20000
103 #warning F_INTERRUPTS too low, RECS80EXT protocol disabled (should be at least 20000)
104 #undef IRMP_SUPPORT_RECS80EXT_PROTOCOL
105 #define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0
108 #endif /* _WC_IRMPCONFIG_H_ */