irsndconfig.h

   1 /*---------------------------------------------------------------------------------------------------------------------------------------------------
   2  * irsndconfig.h
   3  *
   4  * DO NOT INCLUDE THIS FILE, WILL BE INCLUDED BY IRSND.H!
   5  *
   6  * Copyright (c) 2010-2013 Frank Meyer - frank(at)fli4l.de
   7  *
   8  * $Id: irsndconfig.h,v 1.48 2013/03/12 12:49:59 fm Exp $
   9  *
  10  * ATMEGA88 @ 8 MHz
  11  *
  12  * This program is free software; you can redistribute it and/or modify
  13  * it under the terms of the GNU General Public License as published by
  14  * the Free Software Foundation; either version 2 of the License, or
  15  * (at your option) any later version.
  16  *---------------------------------------------------------------------------------------------------------------------------------------------------
  17  */
  18
  19 #ifndef _IRSNDCONFIG_H_
  20 #define _IRSNDCONFIG_H_
  21
  22 #if !defined(_IRSND_H_)
  23 #  error please include only irsnd.h, not irsndconfig.h
  24 #endif
  25
  26 /*---------------------------------------------------------------------------------------------------------------------------------------------------
  27  * F_INTERRUPTS: number of interrupts per second, should be in the range from 10000 to 20000, typically 15000
  28  *---------------------------------------------------------------------------------------------------------------------------------------------------
  29  */
  30 #ifndef F_INTERRUPTS
  31 #  define F_INTERRUPTS                          15000   // interrupts per second
  32 #endif
  33
  34 /*---------------------------------------------------------------------------------------------------------------------------------------------------
  35  * Change settings from 1 to 0 if you want to disable one or more encoders.
  36  * This saves program space.
  37  * 1 enable  decoder
  38  * 0 disable decoder
  39  *---------------------------------------------------------------------------------------------------------------------------------------------------
  40  */
  41
  42 // typical protocols, disable here!             Enable  Remarks                 F_INTERRUPTS            Program Space
  43 #define IRSND_SUPPORT_SIRCS_PROTOCOL            1       // Sony SIRCS           >= 10000                 ~200 bytes
  44 #define IRSND_SUPPORT_NEC_PROTOCOL              1       // NEC + APPLE          >= 10000                 ~100 bytes
  45 #define IRSND_SUPPORT_SAMSUNG_PROTOCOL          1       // Samsung + Samsung32  >= 10000                 ~300 bytes
  46 #define IRSND_SUPPORT_MATSUSHITA_PROTOCOL       1       // Matsushita           >= 10000                 ~200 bytes
  47 #define IRSND_SUPPORT_KASEIKYO_PROTOCOL         1       // Kaseikyo             >= 10000                 ~300 bytes
  48 #define IRSND_SUPPORT_DENON_PROTOCOL            1       // DENON, Sharp         >= 10000                 ~200 bytes
  49
  50 // more protocols, enable here!                 Enable  Remarks                 F_INTERRUPTS            Program Space
  51 #define IRSND_SUPPORT_RC5_PROTOCOL              0       // RC5                  >= 10000                 ~150 bytes
  52 #define IRSND_SUPPORT_RC6_PROTOCOL              0       // RC6                  >= 10000                 ~250 bytes
  53 #define IRSND_SUPPORT_RC6A_PROTOCOL             0       // RC6A                 >= 10000                 ~250 bytes
  54 #define IRSND_SUPPORT_JVC_PROTOCOL              0       // JVC                  >= 10000                 ~150 bytes
  55 #define IRSND_SUPPORT_NEC16_PROTOCOL            0       // NEC16                >= 10000                 ~150 bytes
  56 #define IRSND_SUPPORT_NEC42_PROTOCOL            0       // NEC42                >= 10000                 ~150 bytes
  57 #define IRSND_SUPPORT_IR60_PROTOCOL             0       // IR60 (SDA2008)       >= 10000                 ~250 bytes
  58 #define IRSND_SUPPORT_GRUNDIG_PROTOCOL          0       // Grundig              >= 10000                 ~300 bytes
  59 #define IRSND_SUPPORT_SIEMENS_PROTOCOL          0       // Siemens, Gigaset     >= 15000                 ~150 bytes
  60 #define IRSND_SUPPORT_NOKIA_PROTOCOL            0       // Nokia                >= 10000                 ~400 bytes
  61
  62 // exotic protocols, enable here!               Enable  Remarks                 F_INTERRUPTS            Program Space
  63 #define IRSND_SUPPORT_KATHREIN_PROTOCOL         0       // Kathrein             >= 10000                 DON'T CHANGE, NOT SUPPORTED YET!
  64 #define IRSND_SUPPORT_NUBERT_PROTOCOL           0       // NUBERT               >= 10000                 ~100 bytes
  65 #define IRSND_SUPPORT_BANG_OLUFSEN_PROTOCOL     0       // Bang&Olufsen         >= 10000                 ~250 bytes
  66 #define IRSND_SUPPORT_RECS80_PROTOCOL           0       // RECS80               >= 15000                 ~100 bytes
  67 #define IRSND_SUPPORT_RECS80EXT_PROTOCOL        0       // RECS80EXT            >= 15000                 ~100 bytes
  68 #define IRSND_SUPPORT_THOMSON_PROTOCOL          0       // Thomson              >= 10000                 ~250 bytes
  69 #define IRSND_SUPPORT_NIKON_PROTOCOL            0       // NIKON                >= 10000                 ~150 bytes
  70 #define IRSND_SUPPORT_NETBOX_PROTOCOL           0       // Netbox keyboard      >= 10000                 DON'T CHANGE, NOT SUPPORTED YET!
  71 #define IRSND_SUPPORT_FDC_PROTOCOL              0       // FDC IR keyboard      >= 10000 (better 15000)  ~150 bytes
  72 #define IRSND_SUPPORT_RCCAR_PROTOCOL            0       // RC CAR               >= 10000 (better 15000)  ~150 bytes
  73 #define IRSND_SUPPORT_RUWIDO_PROTOCOL           0       // RUWIDO, T-Home       >= 15000                 DON'T CHANGE, NOT SUPPORTED YET!
  74 #define IRSND_SUPPORT_A1TVBOX_PROTOCOL          0       // A1 TV BOX            >= 15000 (better 20000)  ~200 bytes
  75 #define IRSND_SUPPORT_LEGO_PROTOCOL             0       // LEGO Power RC        >= 20000                 ~150 bytes
  76
  77 /*---------------------------------------------------------------------------------------------------------------------------------------------------
  78  * AVR section:
  79  *
  80  * Change hardware pin here:                    IRSND_OC2  = OC2  on ATmegas         supporting OC2,  e.g. ATmega8
  81  *                                              IRSND_OC2A = OC2A on ATmegas         supporting OC2A, e.g. ATmega88
  82  *                                              IRSND_OC2B = OC2B on ATmegas         supporting OC2B, e.g. ATmega88
  83  *                                              IRSND_OC0  = OC0  on ATmegas         supporting OC0,  e.g. ATmega162
  84  *                                              IRSND_OC0A = OC0A on ATmegas/ATtinys supporting OC0A, e.g. ATtiny84, ATtiny85, ATtiny87/167
  85  *                                              IRSND_OC0B = OC0B on ATmegas/ATtinys supporting OC0B, e.g. ATtiny84, ATtiny85
  86  *---------------------------------------------------------------------------------------------------------------------------------------------------
  87  */
  88 #if defined(ATMEL_AVR)
  89 #  define IRSND_OCx                             IRSND_OC2B              // use OC2B
  90
  91 /*---------------------------------------------------------------------------------------------------------------------------------------------------
  92  * PIC C18 section:
  93  *
  94  * Change hardware pin here:                    IRSND_PIC_CCP1 = RC2 on PIC 18F2550/18F4550, ...
  95  *                                              IRSND_PIC_CCP2 = RC1 on PIC 18F2550/18F4550, ...
  96  *---------------------------------------------------------------------------------------------------------------------------------------------------
  97  */
  98 #elif defined(PIC_C18)
  99 #  define IRSND_OCx                             IRSND_PIC_CCP2          // Use PWMx for PIC
 100                                                                         // change other PIC C18 specific settings:
 101 #  define F_CPU                                 48000000UL              // PIC frequency: set your freq here
 102 #  define Pre_Scaler                            4                       // define prescaler for timer2 e.g. 1,4,16
 103 #  define PIC_Scaler                            2                       // PIC needs /2 extra in IRSND_FREQ_32_KHZ calculation for right value
 104 #  warning Timer2 used for IRSND (PWM out) ! Do not use/setup Timer 2 yourself !
 105
 106 /*---------------------------------------------------------------------------------------------------------------------------------------------------
 107  * ARM STM32 section:
 108  *---------------------------------------------------------------------------------------------------------------------------------------------------
 109  */
 110 #elif defined (ARM_STM32)                                               // use A6 as IR output on STM32
 111 #  define IRSND_PORT_LETTER                     A
 112 #  define IRSND_BIT_NUMBER                      6
 113 #  define IRSND_TIMER_NUMBER                    10
 114 #  define IRSND_TIMER_CHANNEL_NUMBER            1                       // only channel 1 can be used at the moment, others won't work
 115
 116 /*---------------------------------------------------------------------------------------------------------------------------------------------------
 117  * Other target system
 118  *---------------------------------------------------------------------------------------------------------------------------------------------------
 119  */
 120 #elif !defined (UNIX_OR_WINDOWS)
 121 #  error target system not defined.
 122 #endif
 123
 124 /*---------------------------------------------------------------------------------------------------------------------------------------------------
 125  * Use Callbacks to indicate output signal or something else
 126  *---------------------------------------------------------------------------------------------------------------------------------------------------
 127  */
 128 #ifndef IRSND_USE_CALLBACK
 129 #  define IRSND_USE_CALLBACK                    0                       // flag: 0 = don't use callbacks, 1 = use callbacks, default is 0
 130 #endif
 131
 132 #endif // _IRSNDCONFIG_H_