]>
cloudbase.mooo.com Git - irmp.git/blob - irmpprotocols.h
1 /*---------------------------------------------------------------------------------------------------------------------------------------------------
2 * irmpprotocols.h - irmp protocols
4 * DO NOT INCLUDE THIS FILE, WILL BE INCLUDED BY IRMP.H or IRSND.H!
6 * Copyright (c) 2013 Frank Meyer - frank(at)fli4l.de
8 * $Id: irmpprotocols.h,v 1.25 2014/07/09 14:45:56 fm Exp $
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
14 *---------------------------------------------------------------------------------------------------------------------------------------------------
17 #ifndef _IRMP_PROTOCOLS_H_
18 #define _IRMP_PROTOCOLS_H_
20 #if !defined(_IRMP_H_) && !defined(_IRSND_H_)
21 # error please include only irmp.h or irsnd.h, not irmpprotocols.h
24 /*---------------------------------------------------------------------------------------------------------------------------------------------------
26 *---------------------------------------------------------------------------------------------------------------------------------------------------
28 #define IRMP_SIRCS_PROTOCOL 1 // Sony
29 #define IRMP_NEC_PROTOCOL 2 // NEC, Pioneer, JVC, Toshiba, NoName etc.
30 #define IRMP_SAMSUNG_PROTOCOL 3 // Samsung
31 #define IRMP_MATSUSHITA_PROTOCOL 4 // Matsushita
32 #define IRMP_KASEIKYO_PROTOCOL 5 // Kaseikyo (Panasonic etc)
33 #define IRMP_RECS80_PROTOCOL 6 // Philips, Thomson, Nordmende, Telefunken, Saba
34 #define IRMP_RC5_PROTOCOL 7 // Philips etc
35 #define IRMP_DENON_PROTOCOL 8 // Denon, Sharp
36 #define IRMP_RC6_PROTOCOL 9 // Philips etc
37 #define IRMP_SAMSUNG32_PROTOCOL 10 // Samsung32: no sync pulse at bit 16, length 32 instead of 37
38 #define IRMP_APPLE_PROTOCOL 11 // Apple, very similar to NEC
39 #define IRMP_RECS80EXT_PROTOCOL 12 // Philips, Technisat, Thomson, Nordmende, Telefunken, Saba
40 #define IRMP_NUBERT_PROTOCOL 13 // Nubert
41 #define IRMP_BANG_OLUFSEN_PROTOCOL 14 // Bang & Olufsen
42 #define IRMP_GRUNDIG_PROTOCOL 15 // Grundig
43 #define IRMP_NOKIA_PROTOCOL 16 // Nokia
44 #define IRMP_SIEMENS_PROTOCOL 17 // Siemens, e.g. Gigaset
45 #define IRMP_FDC_PROTOCOL 18 // FDC keyboard
46 #define IRMP_RCCAR_PROTOCOL 19 // RC Car
47 #define IRMP_JVC_PROTOCOL 20 // JVC (NEC with 16 bits)
48 #define IRMP_RC6A_PROTOCOL 21 // RC6A, e.g. Kathrein, XBOX
49 #define IRMP_NIKON_PROTOCOL 22 // Nikon
50 #define IRMP_RUWIDO_PROTOCOL 23 // Ruwido, e.g. T-Home Mediareceiver
51 #define IRMP_IR60_PROTOCOL 24 // IR60 (SDA2008)
52 #define IRMP_KATHREIN_PROTOCOL 25 // Kathrein
53 #define IRMP_NETBOX_PROTOCOL 26 // Netbox keyboard (bitserial)
54 #define IRMP_NEC16_PROTOCOL 27 // NEC with 16 bits (incl. sync)
55 #define IRMP_NEC42_PROTOCOL 28 // NEC with 42 bits
56 #define IRMP_LEGO_PROTOCOL 29 // LEGO Power Functions RC
57 #define IRMP_THOMSON_PROTOCOL 30 // Thomson
58 #define IRMP_BOSE_PROTOCOL 31 // BOSE
59 #define IRMP_A1TVBOX_PROTOCOL 32 // A1 TV Box
60 #define IRMP_ORTEK_PROTOCOL 33 // ORTEK - Hama
61 #define IRMP_TELEFUNKEN_PROTOCOL 34 // Telefunken (1560)
62 #define IRMP_ROOMBA_PROTOCOL 35 // iRobot Roomba vacuum cleaner
63 #define IRMP_RCMM32_PROTOCOL 36 // Fujitsu-Siemens (Activy remote control)
64 #define IRMP_RCMM24_PROTOCOL 37 // Fujitsu-Siemens (Activy keyboard)
65 #define IRMP_RCMM12_PROTOCOL 38 // Fujitsu-Siemens (Activy keyboard)
66 #define IRMP_SPEAKER_PROTOCOL 39 // Another loudspeaker protocol, similar to Nubert
67 #define IRMP_LGAIR_PROTOCOL 40 // LG air conditioner
68 #define IRMP_SAMSUNG48_PROTOCOL 41 // air conditioner with SAMSUNG protocol (48 bits)
70 #define IRMP_RADIO1_PROTOCOL 42 // Radio protocol (experimental status), do not use it yet!
72 #define IRMP_N_PROTOCOLS 42 // number of supported protocols
74 /*---------------------------------------------------------------------------------------------------------------------------------------------------
76 *---------------------------------------------------------------------------------------------------------------------------------------------------
78 // fm 22.09.2011: may not be more than 16000L, otherwise some JVC codes will not be accepted
79 #define IRMP_TIMEOUT_TIME 15500.0e-6 // timeout after 15.5 ms darkness
80 #define IRMP_TIMEOUT_TIME_MS 15500L // timeout after 15.5 ms darkness
82 #if IRMP_SUPPORT_NIKON_PROTOCOL == 1
83 # define IRMP_TIMEOUT_NIKON_TIME 29500.0e-6 // 2nd timeout after 29.5 ms darkness (only for NIKON!)
84 # define IRMP_TIMEOUT_NIKON_TIME_MS 29500L // 2nd timeout after 29.5 ms darkness
85 typedef uint16_t PAUSE_LEN
;
86 # define IRMP_TIMEOUT_NIKON_LEN (PAUSE_LEN)(F_INTERRUPTS * IRMP_TIMEOUT_NIKON_TIME + 0.5)
88 # if (F_INTERRUPTS * IRMP_TIMEOUT_TIME_MS) / 1000000 >= 254
89 typedef uint16_t PAUSE_LEN
;
91 typedef uint8_t PAUSE_LEN
;
95 #define IRMP_TIMEOUT_LEN (PAUSE_LEN)(F_INTERRUPTS * IRMP_TIMEOUT_TIME + 0.5)
97 /*---------------------------------------------------------------------------------------------------------------------------------------------------
98 * flags of struct IRMP_PARAMETER:
99 *---------------------------------------------------------------------------------------------------------------------------------------------------
101 #define IRMP_PARAM_FLAG_IS_MANCHESTER 0x01
102 #define IRMP_PARAM_FLAG_1ST_PULSE_IS_1 0x02
103 #define IRMP_PARAM_FLAG_IS_SERIAL 0x04
105 /*---------------------------------------------------------------------------------------------------------------------------------------------------
107 *---------------------------------------------------------------------------------------------------------------------------------------------------
109 #define SIRCS_START_BIT_PULSE_TIME 2400.0e-6 // 2400 usec pulse
110 #define SIRCS_START_BIT_PAUSE_TIME 600.0e-6 // 600 usec pause
111 #define SIRCS_1_PULSE_TIME 1200.0e-6 // 1200 usec pulse
112 #define SIRCS_0_PULSE_TIME 600.0e-6 // 600 usec pulse
113 #define SIRCS_PAUSE_TIME 600.0e-6 // 600 usec pause
114 #define SIRCS_FRAMES 3 // SIRCS sends each frame 3 times
115 #define SIRCS_AUTO_REPETITION_PAUSE_TIME 25.0e-3 // auto repetition after 25ms
116 #define SIRCS_FRAME_REPEAT_PAUSE_TIME 25.0e-3 // frame repeat after 25ms
117 #define SIRCS_ADDRESS_OFFSET 15 // skip 15 bits
118 #define SIRCS_ADDRESS_LEN 5 // read up to 5 address bits
119 #define SIRCS_COMMAND_OFFSET 0 // skip 0 bits
120 #define SIRCS_COMMAND_LEN 15 // read 12-15 command bits
121 #define SIRCS_MINIMUM_DATA_LEN 12 // minimum data length
122 #define SIRCS_COMPLETE_DATA_LEN 20 // complete length - may be up to 20
123 #define SIRCS_STOP_BIT 0 // has no stop bit
124 #define SIRCS_LSB 1 // LSB...MSB
125 #define SIRCS_FLAGS 0 // flags
127 /*---------------------------------------------------------------------------------------------------------------------------------------------------
128 * NEC & NEC42 & NEC16 & LGAIR:
129 *---------------------------------------------------------------------------------------------------------------------------------------------------
131 #define NEC_START_BIT_PULSE_TIME 9000.0e-6 // 9000 usec pulse
132 #define NEC_START_BIT_PAUSE_TIME 4500.0e-6 // 4500 usec pause
133 #define NEC_REPEAT_START_BIT_PAUSE_TIME 2250.0e-6 // 2250 usec pause
134 #define NEC_PULSE_TIME 560.0e-6 // 560 usec pulse
135 #define NEC_1_PAUSE_TIME 1690.0e-6 // 1690 usec pause
136 #define NEC_0_PAUSE_TIME 560.0e-6 // 560 usec pause
137 #define NEC_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms
138 #define NEC_ADDRESS_OFFSET 0 // skip 0 bits
139 #define NEC_ADDRESS_LEN 16 // read 16 address bits
140 #define NEC_COMMAND_OFFSET 16 // skip 16 bits (8 address + 8 /address)
141 #define NEC_COMMAND_LEN 16 // read 16 bits (8 command + 8 /command)
142 #define NEC_COMPLETE_DATA_LEN 32 // complete length
143 #define NEC_STOP_BIT 1 // has stop bit
144 #define NEC_LSB 1 // LSB...MSB
145 #define NEC_FLAGS 0 // flags
147 #define NEC42_ADDRESS_OFFSET 0 // skip 0 bits
148 #define NEC42_ADDRESS_LEN 13 // read 13 address bits
149 #define NEC42_COMMAND_OFFSET 26 // skip 26 bits (2 x 13 address bits)
150 #define NEC42_COMMAND_LEN 8 // read 8 command bits
151 #define NEC42_COMPLETE_DATA_LEN 42 // complete length (2 x 13 + 2 x 8)
153 #define LGAIR_ADDRESS_OFFSET 0 // skip 0 bits
154 #define LGAIR_ADDRESS_LEN 8 // read 8 address bits
155 #define LGAIR_COMMAND_OFFSET 8 // skip 8 bits (8 address)
156 #define LGAIR_COMMAND_LEN 16 // read 16 bits (16 command)
157 #define LGAIR_COMPLETE_DATA_LEN 28 // complete length (8 address + 16 command + 4 checksum)
159 #define NEC16_ADDRESS_OFFSET 0 // skip 0 bits
160 #define NEC16_ADDRESS_LEN 8 // read 8 address bits
161 #define NEC16_COMMAND_OFFSET 8 // skip 8 bits (8 address)
162 #define NEC16_COMMAND_LEN 8 // read 8 bits (8 command)
163 #define NEC16_COMPLETE_DATA_LEN 16 // complete length
165 /*---------------------------------------------------------------------------------------------------------------------------------------------------
166 * SAMSUNG & SAMSUNG32 & SAMSUNG48:
167 *---------------------------------------------------------------------------------------------------------------------------------------------------
169 #define SAMSUNG_START_BIT_PULSE_TIME 4500.0e-6 // 4500 usec pulse
170 #define SAMSUNG_START_BIT_PAUSE_TIME 4500.0e-6 // 4500 usec pause
171 #define SAMSUNG_PULSE_TIME 550.0e-6 // 550 usec pulse
172 #define SAMSUNG_1_PAUSE_TIME 1500.0e-6 // 1550 usec pause
173 #define SAMSUNG_0_PAUSE_TIME 500.0e-6 // 500 usec pause
175 #define SAMSUNG_FRAME_REPEAT_PAUSE_TIME 25.0e-3 // frame repeat after 25ms
176 #define SAMSUNG_ADDRESS_OFFSET 0 // skip 0 bits
177 #define SAMSUNG_ADDRESS_LEN 16 // read 16 address bits
178 #define SAMSUNG_ID_OFFSET 17 // skip 16 + 1 sync bit
179 #define SAMSUNG_ID_LEN 4 // read 4 id bits
180 #define SAMSUNG_COMMAND_OFFSET 21 // skip 16 + 1 sync + 4 data bits
181 #define SAMSUNG_COMMAND_LEN 16 // read 16 command bits
182 #define SAMSUNG_COMPLETE_DATA_LEN 37 // complete length
183 #define SAMSUNG_STOP_BIT 1 // has stop bit
184 #define SAMSUNG_LSB 1 // LSB...MSB?
185 #define SAMSUNG_FLAGS 0 // flags
187 #define SAMSUNG32_COMMAND_OFFSET 16 // skip 16 bits
188 #define SAMSUNG32_COMMAND_LEN 16 // read 16 command bits
189 #define SAMSUNG32_COMPLETE_DATA_LEN 32 // complete length
190 #define SAMSUNG32_FRAMES 2 // SAMSUNG32 sends each frame 2 times // fm: correct?
191 #define SAMSUNG32_AUTO_REPETITION_PAUSE_TIME 47.0e-3 // repetition after 47 ms
192 #define SAMSUNG32_FRAME_REPEAT_PAUSE_TIME 47.0e-3 // frame repeat after 47ms
194 #define SAMSUNG48_COMMAND_OFFSET 16 // skip 16 bits
195 #define SAMSUNG48_COMMAND_LEN 32 // read 32 command bits
196 #define SAMSUNG48_COMPLETE_DATA_LEN 48 // complete length
197 #define SAMSUNG48_FRAMES 2 // SAMSUNG48 sends each frame 2 times
198 #define SAMSUNG48_AUTO_REPETITION_PAUSE_TIME 5.0e-3 // repetition after 5 ms
199 #define SAMSUNG48_FRAME_REPEAT_PAUSE_TIME 47.0e-3 // frame repeat after 47ms
201 /*---------------------------------------------------------------------------------------------------------------------------------------------------
203 *---------------------------------------------------------------------------------------------------------------------------------------------------
205 #define MATSUSHITA_START_BIT_PULSE_TIME 3488.0e-6 // 3488 usec pulse
206 #define MATSUSHITA_START_BIT_PAUSE_TIME 3488.0e-6 // 3488 usec pause
207 #define MATSUSHITA_PULSE_TIME 872.0e-6 // 872 usec pulse
208 #define MATSUSHITA_1_PAUSE_TIME 2616.0e-6 // 2616 usec pause
209 #define MATSUSHITA_0_PAUSE_TIME 872.0e-6 // 872 usec pause
210 #define MATSUSHITA_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms
211 #define MATSUSHITA_ADDRESS_OFFSET 12 // skip 12 bits
212 #define MATSUSHITA_ADDRESS_LEN 12 // read 12 address bits
213 #define MATSUSHITA_COMMAND_OFFSET 0 // skip 0 bits
214 #define MATSUSHITA_COMMAND_LEN 12 // read 12 bits (6 custom + 6 command)
215 #define MATSUSHITA_COMPLETE_DATA_LEN 24 // complete length
216 #define MATSUSHITA_STOP_BIT 1 // has stop bit
217 #define MATSUSHITA_LSB 1 // LSB...MSB?
218 #define MATSUSHITA_FLAGS 0 // flags
220 /*---------------------------------------------------------------------------------------------------------------------------------------------------
222 *---------------------------------------------------------------------------------------------------------------------------------------------------
224 #define KASEIKYO_START_BIT_PULSE_TIME 3380.0e-6 // 3380 usec pulse
225 #define KASEIKYO_START_BIT_PAUSE_TIME 1690.0e-6 // 1690 usec pause
226 #define KASEIKYO_PULSE_TIME 423.0e-6 // 525 usec pulse
227 #define KASEIKYO_1_PAUSE_TIME 1269.0e-6 // 525 usec pause
228 #define KASEIKYO_0_PAUSE_TIME 423.0e-6 // 1690 usec pause
229 #define KASEIKYO_AUTO_REPETITION_PAUSE_TIME 74.0e-3 // repetition after 74 ms
230 #define KASEIKYO_FRAME_REPEAT_PAUSE_TIME 74.0e-3 // frame repeat after 74 ms
231 #define KASEIKYO_ADDRESS_OFFSET 0 // skip 0 bits
232 #define KASEIKYO_ADDRESS_LEN 16 // read 16 address bits
233 #define KASEIKYO_COMMAND_OFFSET 28 // skip 28 bits (16 manufacturer & 4 parity & 8 genre)
234 #define KASEIKYO_COMMAND_LEN 12 // read 12 command bits (10 real command & 2 id)
235 #define KASEIKYO_COMPLETE_DATA_LEN 48 // complete length
236 #define KASEIKYO_STOP_BIT 1 // has stop bit
237 #define KASEIKYO_LSB 1 // LSB...MSB?
238 #define KASEIKYO_FRAMES 2 // KASEIKYO sends 1st frame 2 times
239 #define KASEIKYO_FLAGS 0 // flags
241 /*---------------------------------------------------------------------------------------------------------------------------------------------------
243 *---------------------------------------------------------------------------------------------------------------------------------------------------
245 #define RECS80_START_BIT_PULSE_TIME 158.0e-6 // 158 usec pulse
246 #define RECS80_START_BIT_PAUSE_TIME 7432.0e-6 // 7432 usec pause
247 #define RECS80_PULSE_TIME 158.0e-6 // 158 usec pulse
248 #define RECS80_1_PAUSE_TIME 7432.0e-6 // 7432 usec pause
249 #define RECS80_0_PAUSE_TIME 4902.0e-6 // 4902 usec pause
250 #define RECS80_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
251 #define RECS80_ADDRESS_OFFSET 1 // skip 1 bit (toggle bit)
252 #define RECS80_ADDRESS_LEN 3 // read 3 address bits
253 #define RECS80_COMMAND_OFFSET 4 // skip 4 bits (1 toggle + 3 address)
254 #define RECS80_COMMAND_LEN 6 // read 6 command bits
255 #define RECS80_COMPLETE_DATA_LEN 10 // complete length
256 #define RECS80_STOP_BIT 1 // has stop bit
257 #define RECS80_LSB 0 // MSB...LSB
258 #define RECS80_FLAGS 0 // flags
260 /*---------------------------------------------------------------------------------------------------------------------------------------------------
262 *---------------------------------------------------------------------------------------------------------------------------------------------------
264 #define RC5_BIT_TIME 889.0e-6 // 889 usec pulse/pause
265 #define RC5_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
267 #define RC5_ADDRESS_OFFSET 1 // skip 1 bit (2nd start)
268 #define RC5_ADDRESS_LEN 6 // read 1 toggle bit (for key repetition detection) + 5 address bits
269 #define RC5_COMMAND_OFFSET 7 // skip 5 bits (2nd start + 1 toggle + 5 address)
270 #define RC5_COMMAND_LEN 6 // read 6 command bits
271 #define RC5_COMPLETE_DATA_LEN 13 // complete length
272 #define RC5_STOP_BIT 0 // has no stop bit
273 #define RC5_LSB 0 // MSB...LSB
274 #define RC5_FLAGS IRMP_PARAM_FLAG_IS_MANCHESTER // flags
276 /*---------------------------------------------------------------------------------------------------------------------------------------------------
278 *---------------------------------------------------------------------------------------------------------------------------------------------------
280 #define DENON_PULSE_TIME 310.0e-6 // 310 usec pulse in practice, 275 in theory
281 #define DENON_1_PAUSE_TIME 1780.0e-6 // 1780 usec pause in practice, 1900 in theory
282 #define DENON_0_PAUSE_TIME 745.0e-6 // 745 usec pause in practice, 775 in theory
283 #define DENON_FRAMES 2 // DENON sends each frame 2 times
284 #define DENON_AUTO_REPETITION_PAUSE_TIME 65.0e-3 // inverted repetition after 65ms
285 #define DENON_FRAME_REPEAT_PAUSE_TIME 130.0e-3 // frame repeat after 2 * 65ms
286 #define DENON_ADDRESS_OFFSET 0 // skip 0 bits
287 #define DENON_ADDRESS_LEN 5 // read 5 address bits
288 #define DENON_COMMAND_OFFSET 5 // skip 5
289 #define DENON_COMMAND_LEN 10 // read 10 command bits
290 #define DENON_COMPLETE_DATA_LEN 15 // complete length
291 #define DENON_STOP_BIT 1 // has stop bit
292 #define DENON_LSB 0 // MSB...LSB
293 #define DENON_FLAGS 0 // flags
295 /*---------------------------------------------------------------------------------------------------------------------------------------------------
297 *---------------------------------------------------------------------------------------------------------------------------------------------------
299 #define RC6_START_BIT_PULSE_TIME 2666.0e-6 // 2.666 msec pulse
300 #define RC6_START_BIT_PAUSE_TIME 889.0e-6 // 889 usec pause
301 #define RC6_TOGGLE_BIT_TIME 889.0e-6 // 889 msec pulse/pause
302 #define RC6_BIT_TIME 444.0e-6 // 889 usec pulse/pause
303 #define RC6_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
304 #define RC6_ADDRESS_OFFSET 5 // skip "1" + 3 mode bits + 1 toggle bit
305 #define RC6_ADDRESS_LEN 8 // read 8 address bits
306 #define RC6_COMMAND_OFFSET 13 // skip 12 bits ("1" + 3 mode + 1 toggle + 8 address)
307 #define RC6_COMMAND_LEN 8 // read 8 command bits
308 #define RC6_COMPLETE_DATA_LEN_SHORT 21 // complete length
309 #define RC6_COMPLETE_DATA_LEN_LONG 36 // complete length
310 #define RC6_STOP_BIT 0 // has no stop bit
311 #define RC6_LSB 0 // MSB...LSB
312 #define RC6_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags
314 /*---------------------------------------------------------------------------------------------------------------------------------------------------
316 *---------------------------------------------------------------------------------------------------------------------------------------------------
318 #define RECS80EXT_START_BIT_PULSE_TIME 158.0e-6 // 158 usec pulse
319 #define RECS80EXT_START_BIT_PAUSE_TIME 3637.0e-6 // 3637 usec pause
320 #define RECS80EXT_PULSE_TIME 158.0e-6 // 158 usec pulse
321 #define RECS80EXT_1_PAUSE_TIME 7432.0e-6 // 7432 usec pause
322 #define RECS80EXT_0_PAUSE_TIME 4902.0e-6 // 4902 usec pause
323 #define RECS80EXT_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
324 #define RECS80EXT_ADDRESS_OFFSET 2 // skip 2 bits (2nd start + 1 toggle)
325 #define RECS80EXT_ADDRESS_LEN 4 // read 4 address bits
326 #define RECS80EXT_COMMAND_OFFSET 6 // skip 6 bits (2nd start + 1 toggle + 4 address)
327 #define RECS80EXT_COMMAND_LEN 6 // read 6 command bits
328 #define RECS80EXT_COMPLETE_DATA_LEN 12 // complete length
329 #define RECS80EXT_STOP_BIT 1 // has stop bit
330 #define RECS80EXT_LSB 0 // MSB...LSB
331 #define RECS80EXT_FLAGS 0 // flags
333 /*---------------------------------------------------------------------------------------------------------------------------------------------------
335 *---------------------------------------------------------------------------------------------------------------------------------------------------
337 #define NUBERT_START_BIT_PULSE_TIME 1340.0e-6 // 1340 usec pulse
338 #define NUBERT_START_BIT_PAUSE_TIME 340.0e-6 // 340 usec pause
339 #define NUBERT_1_PULSE_TIME 1340.0e-6 // 1340 usec pulse
340 #define NUBERT_1_PAUSE_TIME 340.0e-6 // 340 usec pause
341 #define NUBERT_0_PULSE_TIME 500.0e-6 // 500 usec pulse
342 #define NUBERT_0_PAUSE_TIME 1300.0e-6 // 1300 usec pause
343 #define NUBERT_FRAMES 2 // Nubert sends 2 frames
344 #define NUBERT_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // auto repetition after 35ms
345 #define NUBERT_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 45ms
346 #define NUBERT_ADDRESS_OFFSET 0 // skip 0 bits
347 #define NUBERT_ADDRESS_LEN 0 // read 0 address bits
348 #define NUBERT_COMMAND_OFFSET 0 // skip 0 bits
349 #define NUBERT_COMMAND_LEN 10 // read 10 bits
350 #define NUBERT_COMPLETE_DATA_LEN 10 // complete length
351 #define NUBERT_STOP_BIT 1 // has stop bit
352 #define NUBERT_LSB 0 // MSB?
353 #define NUBERT_FLAGS 0 // flags
355 /*---------------------------------------------------------------------------------------------------------------------------------------------------
357 *---------------------------------------------------------------------------------------------------------------------------------------------------
359 #define SPEAKER_START_BIT_PULSE_TIME 440.0e-6 // 1340 usec pulse
360 #define SPEAKER_START_BIT_PAUSE_TIME 1250.0e-6 // 340 usec pause
361 #define SPEAKER_1_PULSE_TIME 1250.0e-6 // 1340 usec pulse
362 #define SPEAKER_1_PAUSE_TIME 440.0e-6 // 340 usec pause
363 #define SPEAKER_0_PULSE_TIME 440.0e-6 // 500 usec pulse
364 #define SPEAKER_0_PAUSE_TIME 1250.0e-6 // 1300 usec pause
365 #define SPEAKER_FRAMES 2 // Nubert sends 2 frames
366 #define SPEAKER_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // auto repetition after 35ms
367 #define SPEAKER_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 45ms
368 #define SPEAKER_ADDRESS_OFFSET 0 // skip 0 bits
369 #define SPEAKER_ADDRESS_LEN 0 // read 0 address bits
370 #define SPEAKER_COMMAND_OFFSET 0 // skip 0 bits
371 #define SPEAKER_COMMAND_LEN 10 // read 10 bits
372 #define SPEAKER_COMPLETE_DATA_LEN 10 // complete length
373 #define SPEAKER_STOP_BIT 1 // has stop bit
374 #define SPEAKER_LSB 0 // MSB?
375 #define SPEAKER_FLAGS 0 // flags
377 /*---------------------------------------------------------------------------------------------------------------------------------------------------
379 *---------------------------------------------------------------------------------------------------------------------------------------------------
381 #define BANG_OLUFSEN_START_BIT1_PULSE_TIME 200.0e-6 // 200 usec pulse
382 #define BANG_OLUFSEN_START_BIT1_PAUSE_TIME 3125.0e-6 // 3125 usec pause
383 #define BANG_OLUFSEN_START_BIT2_PULSE_TIME 200.0e-6 // 200 usec pulse
384 #define BANG_OLUFSEN_START_BIT2_PAUSE_TIME 3125.0e-6 // 3125 usec pause
385 #define BANG_OLUFSEN_START_BIT3_PULSE_TIME 200.0e-6 // 200 usec pulse
386 #define BANG_OLUFSEN_START_BIT3_PAUSE_TIME 15625.0e-6 // 15625 usec pause
387 #define BANG_OLUFSEN_START_BIT4_PULSE_TIME 200.0e-6 // 200 usec pulse
388 #define BANG_OLUFSEN_START_BIT4_PAUSE_TIME 3125.0e-6 // 3125 usec pause
389 #define BANG_OLUFSEN_PULSE_TIME 200.0e-6 // 200 usec pulse
390 #define BANG_OLUFSEN_1_PAUSE_TIME 9375.0e-6 // 9375 usec pause
391 #define BANG_OLUFSEN_0_PAUSE_TIME 3125.0e-6 // 3125 usec pause
392 #define BANG_OLUFSEN_R_PAUSE_TIME 6250.0e-6 // 6250 usec pause (repeat last bit)
393 #define BANG_OLUFSEN_TRAILER_BIT_PAUSE_TIME 12500.0e-6 // 12500 usec pause (trailer bit)
394 #define BANG_OLUFSEN_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
395 #define BANG_OLUFSEN_ADDRESS_OFFSET 0 // no address bits
396 #define BANG_OLUFSEN_ADDRESS_LEN 0 // no address bits
397 #define BANG_OLUFSEN_COMMAND_OFFSET 3 // skip startbits 2, 3, 4
398 #define BANG_OLUFSEN_COMMAND_LEN 16 // read 16 command bits
399 #define BANG_OLUFSEN_COMPLETE_DATA_LEN 20 // complete length: startbits 2, 3, 4 + 16 data bits + trailer bit
400 #define BANG_OLUFSEN_STOP_BIT 1 // has stop bit
401 #define BANG_OLUFSEN_LSB 0 // MSB...LSB
402 #define BANG_OLUFSEN_FLAGS 0 // flags
404 /*---------------------------------------------------------------------------------------------------------------------------------------------------
406 *---------------------------------------------------------------------------------------------------------------------------------------------------
408 #define GRUNDIG_NOKIA_IR60_BIT_TIME 528.0e-6 // 528 usec pulse/pause
409 #define GRUNDIG_NOKIA_IR60_PRE_PAUSE_TIME 2639.0e-6 // 2639 usec pause after pre bit
410 #define GRUNDIG_NOKIA_IR60_FRAME_REPEAT_PAUSE_TIME 117.76e-3 // info frame repeat after 117.76 ms
411 #define GRUNDIG_NOKIA_IR60_STOP_BIT 0 // has no stop bit
412 #define GRUNDIG_NOKIA_IR60_LSB 1 // MSB...LSB
413 #define GRUNDIG_NOKIA_IR60_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags
415 #define GRUNDIG_FRAMES 2 // GRUNDIG sends each frame 1+1 times
416 #define GRUNDIG_AUTO_REPETITION_PAUSE_TIME 20.0e-3 // repetition after 20ms
417 #define GRUNDIG_ADDRESS_OFFSET 0 // no address
418 #define GRUNDIG_ADDRESS_LEN 0 // no address
419 #define GRUNDIG_COMMAND_OFFSET 1 // skip 1 start bit
420 #define GRUNDIG_COMMAND_LEN 9 // read 9 command bits
421 #define GRUNDIG_COMPLETE_DATA_LEN 10 // complete length: 1 start bit + 9 data bits
423 #define NOKIA_FRAMES 3 // NOKIA sends each frame 1 + 1 + 1 times
424 #define NOKIA_AUTO_REPETITION_PAUSE_TIME 20.0e-3 // repetition after 20ms
425 #define NOKIA_ADDRESS_OFFSET 9 // skip 9 bits (1 start bit + 8 data bits)
426 #define NOKIA_ADDRESS_LEN 8 // 7 address bits
427 #define NOKIA_COMMAND_OFFSET 1 // skip 1 bit (1 start bit)
428 #define NOKIA_COMMAND_LEN 8 // read 8 command bits
429 #define NOKIA_COMPLETE_DATA_LEN 17 // complete length: 1 start bit + 8 address bits + 8 command bits
431 /*---------------------------------------------------------------------------------------------------------------------------------------------------
433 *---------------------------------------------------------------------------------------------------------------------------------------------------
435 #define IR60_FRAMES 2 // IR60 sends each frame 1+1 times
436 #define IR60_AUTO_REPETITION_PAUSE_TIME 22.2e-3 // repetition after 22.2ms
437 #define IR60_TIMEOUT_TIME 5000.0e-6 // timeout grundig frame, switch to IR60
438 #define IR60_ADDRESS_OFFSET 0 // skip 1 bits
439 #define IR60_ADDRESS_LEN 0 // read 0 address bits
440 #define IR60_COMMAND_OFFSET 0 // skip 1 bit (start bit after pre bit, always 1)
441 #define IR60_COMMAND_LEN 7 // read 6 command bits
442 #define IR60_COMPLETE_DATA_LEN 7 // complete length
444 /*---------------------------------------------------------------------------------------------------------------------------------------------------
446 *---------------------------------------------------------------------------------------------------------------------------------------------------
450 #define SIEMENS_OR_RUWIDO_START_BIT_PULSE_TIME 275.0e-6 // 275 usec pulse
451 #define SIEMENS_OR_RUWIDO_START_BIT_PAUSE_TIME 550.0e-6 // 550 usec pause
452 #define SIEMENS_OR_RUWIDO_BIT_PULSE_TIME 275.0e-6 // 275 usec short pulse
453 #define SIEMENS_OR_RUWIDO_BIT_PULSE_TIME_2 550.0e-6 // 550 usec long pulse
454 #define SIEMENS_OR_RUWIDO_BIT_PAUSE_TIME 275.0e-6 // 275 usec short pause
455 #define SIEMENS_OR_RUWIDO_BIT_PAUSE_TIME_2 550.0e-6 // 550 usec long pause
457 #define SIEMENS_OR_RUWIDO_START_BIT_PULSE_TIME 370.0e-6 // 370 usec pulse
458 #define SIEMENS_OR_RUWIDO_START_BIT_PAUSE_TIME 550.0e-6 // 550 usec pause
459 #define SIEMENS_OR_RUWIDO_BIT_PULSE_TIME 370.0e-6 // 370 usec short pulse
460 #define SIEMENS_OR_RUWIDO_BIT_PULSE_TIME_2 680.0e-6 // 680 usec long pulse
461 #define SIEMENS_OR_RUWIDO_BIT_PAUSE_TIME 275.0e-6 // 275 usec short pause
462 #define SIEMENS_OR_RUWIDO_BIT_PAUSE_TIME_2 550.0e-6 // 550 usec long pause
465 #define SIEMENS_OR_RUWIDO_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
466 #define SIEMENS_OR_RUWIDO_STOP_BIT 0 // has no stop bit
467 #define SIEMENS_OR_RUWIDO_LSB 0 // MSB...LSB
468 #define SIEMENS_OR_RUWIDO_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags
470 #define RUWIDO_ADDRESS_OFFSET 0 // skip 0 bits
471 #define RUWIDO_ADDRESS_LEN 9 // read 9 address bits
472 #define RUWIDO_COMMAND_OFFSET 9 // skip 9 bits
473 #define RUWIDO_COMMAND_LEN 8 // read 7 + 1 command bits, last bit is only check bit
474 #define RUWIDO_COMPLETE_DATA_LEN 17 // complete length
476 #define SIEMENS_ADDRESS_OFFSET 0 // skip 0 bits
477 #define SIEMENS_ADDRESS_LEN 11 // read 11 bits
478 #define SIEMENS_COMMAND_OFFSET 11 // skip 11 bits
479 #define SIEMENS_COMMAND_LEN 11 // read 10 + 1 command bits, last bit is only check bit
480 #define SIEMENS_COMPLETE_DATA_LEN 22 // complete length
482 /*---------------------------------------------------------------------------------------------------------------------------------------------------
484 *---------------------------------------------------------------------------------------------------------------------------------------------------
486 #define FDC_START_BIT_PULSE_TIME 2085.0e-6 // 2085 usec pulse
487 #define FDC_START_BIT_PAUSE_TIME 966.0e-6 // 966 usec pause
488 #define FDC_PULSE_TIME 300.0e-6 // 300 usec pulse
489 #define FDC_1_PAUSE_TIME 715.0e-6 // 715 usec pause
490 #define FDC_0_PAUSE_TIME 220.0e-6 // 220 usec pause
491 #define FDC_FRAME_REPEAT_PAUSE_TIME 60.0e-3 // frame repeat after 60ms
492 #define FDC_ADDRESS_OFFSET 0 // skip 0 bits
493 #define FDC_ADDRESS_LEN 14 // read 14 address bits, but use only 6, shift 8 into command
494 #define FDC_COMMAND_OFFSET 20 // skip 20 bits
495 #define FDC_COMMAND_LEN 12 // read 12 bits
496 #define FDC_COMPLETE_DATA_LEN 40 // complete length
497 #define FDC_STOP_BIT 1 // has stop bit
498 #define FDC_LSB 1 // LSB...MSB
499 #define FDC_FLAGS 0 // flags
501 /*---------------------------------------------------------------------------------------------------------------------------------------------------
503 *---------------------------------------------------------------------------------------------------------------------------------------------------
505 #define RCCAR_START_BIT_PULSE_TIME 2000.0e-6 // 2000 usec pulse
506 #define RCCAR_START_BIT_PAUSE_TIME 2000.0e-6 // 2000 usec pause
507 #define RCCAR_PULSE_TIME 600.0e-6 // 360 usec pulse
508 #define RCCAR_1_PAUSE_TIME 450.0e-6 // 650 usec pause
509 #define RCCAR_0_PAUSE_TIME 900.0e-6 // 180 usec pause
510 #define RCCAR_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms
511 #define RCCAR_ADDRESS_OFFSET 0 // skip 0 bits
512 #define RCCAR_ADDRESS_LEN 0 // read 0 address bits
513 #define RCCAR_COMMAND_OFFSET 0 // skip 0 bits
514 #define RCCAR_COMMAND_LEN 13 // read 13 bits
515 #define RCCAR_COMPLETE_DATA_LEN 13 // complete length
516 #define RCCAR_STOP_BIT 1 // has stop bit
517 #define RCCAR_LSB 1 // LSB...MSB
518 #define RCCAR_FLAGS 0 // flags
520 /*---------------------------------------------------------------------------------------------------------------------------------------------------
522 *---------------------------------------------------------------------------------------------------------------------------------------------------
524 #define JVC_START_BIT_PULSE_TIME 9000.0e-6 // 9000 usec pulse
525 #define JVC_START_BIT_PAUSE_TIME 4500.0e-6 // 4500 usec pause
526 #define JVC_PULSE_TIME 560.0e-6 // 560 usec pulse
527 #define JVC_1_PAUSE_TIME 1690.0e-6 // 1690 usec pause
528 #define JVC_0_PAUSE_TIME 560.0e-6 // 560 usec pause
529 #define JVC_FRAME_REPEAT_PAUSE_TIME 22.0e-3 // frame repeat after 22ms
530 #define JVC_ADDRESS_OFFSET 0 // skip 0 bits
531 #define JVC_ADDRESS_LEN 4 // read 4 address bits
532 #define JVC_COMMAND_OFFSET 4 // skip 4 bits
533 #define JVC_COMMAND_LEN 12 // read 12 bits
534 #define JVC_COMPLETE_DATA_LEN 16 // complete length
535 #define JVC_STOP_BIT 1 // has stop bit
536 #define JVC_LSB 1 // LSB...MSB
537 #define JVC_FLAGS 0 // flags
539 /*---------------------------------------------------------------------------------------------------------------------------------------------------
541 *---------------------------------------------------------------------------------------------------------------------------------------------------
543 #define NIKON_START_BIT_PULSE_TIME 2200.0e-6 // 2200 usec pulse
544 #define NIKON_START_BIT_PAUSE_TIME 27100.0e-6 // 27100 usec pause
545 #define NIKON_PULSE_TIME 500.0e-6 // 500 usec pulse
546 #define NIKON_1_PAUSE_TIME 3500.0e-6 // 3500 usec pause
547 #define NIKON_0_PAUSE_TIME 1500.0e-6 // 1500 usec pause
548 #define NIKON_FRAME_REPEAT_PAUSE_TIME 60.0e-3 // frame repeat after 60ms
549 #define NIKON_ADDRESS_OFFSET 0 // skip 0 bits
550 #define NIKON_ADDRESS_LEN 0 // read 0 address bits
551 #define NIKON_COMMAND_OFFSET 0 // skip 0 bits
552 #define NIKON_COMMAND_LEN 2 // read 2 bits
553 #define NIKON_COMPLETE_DATA_LEN 2 // complete length
554 #define NIKON_STOP_BIT 1 // has stop bit
555 #define NIKON_LSB 0 // LSB...MSB
556 #define NIKON_FLAGS 0 // flags
558 /*---------------------------------------------------------------------------------------------------------------------------------------------------
560 *---------------------------------------------------------------------------------------------------------------------------------------------------
562 #define KATHREIN_START_BIT_PULSE_TIME 210.0e-6 // 1340 usec pulse
563 #define KATHREIN_START_BIT_PAUSE_TIME 6218.0e-6 // 340 usec pause
564 #define KATHREIN_1_PULSE_TIME 210.0e-6 // 1340 usec pulse
565 #define KATHREIN_1_PAUSE_TIME 3000.0e-6 // 340 usec pause
566 #define KATHREIN_0_PULSE_TIME 210.0e-6 // 500 usec pulse
567 #define KATHREIN_0_PAUSE_TIME 1400.0e-6 // 1300 usec pause
568 #define KATHREIN_SYNC_BIT_PAUSE_LEN_TIME 4600.0e-6 // 4600 usec sync (on 6th and/or 8th bit)
569 #define KATHREIN_FRAMES 1 // Kathrein sends 1 frame
570 #define KATHREIN_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // auto repetition after 35ms
571 #define KATHREIN_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 35ms
572 #define KATHREIN_ADDRESS_OFFSET 1 // skip 1 bits
573 #define KATHREIN_ADDRESS_LEN 4 // read 4 address bits
574 #define KATHREIN_COMMAND_OFFSET 5 // skip 5 bits
575 #define KATHREIN_COMMAND_LEN 7 // read 7 bits
576 #define KATHREIN_COMPLETE_DATA_LEN 13 // complete length
577 #define KATHREIN_STOP_BIT 1 // has stop bit
578 #define KATHREIN_LSB 0 // MSB
579 #define KATHREIN_FLAGS 0 // flags
581 /*---------------------------------------------------------------------------------------------------------------------------------------------------
583 *---------------------------------------------------------------------------------------------------------------------------------------------------
585 #define NETBOX_START_BIT_PULSE_TIME 2400.0e-6 // 2400 usec pulse
586 #define NETBOX_START_BIT_PAUSE_TIME 800.0e-6 // 800 usec pause
587 #define NETBOX_PULSE_TIME 800.0e-6 // 800 usec pulse
588 #define NETBOX_PAUSE_TIME 800.0e-6 // 800 usec pause
589 #define NETBOX_FRAMES 1 // Netbox sends 1 frame
590 #define NETBOX_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // auto repetition after 35ms
591 #define NETBOX_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 35ms
592 #define NETBOX_ADDRESS_OFFSET 0 // skip 0 bits
593 #define NETBOX_ADDRESS_LEN 3 // read 3 address bits
594 #define NETBOX_COMMAND_OFFSET 3 // skip 3 bits
595 #define NETBOX_COMMAND_LEN 13 // read 13 bits
596 #define NETBOX_COMPLETE_DATA_LEN 16 // complete length
597 #define NETBOX_STOP_BIT 0 // has no stop bit
598 #define NETBOX_LSB 1 // LSB
599 #define NETBOX_FLAGS IRMP_PARAM_FLAG_IS_SERIAL // flags
601 /*---------------------------------------------------------------------------------------------------------------------------------------------------
603 *---------------------------------------------------------------------------------------------------------------------------------------------------
605 #define LEGO_START_BIT_PULSE_TIME 158.0e-6 // 158 usec pulse ( 6 x 1/38kHz)
606 #define LEGO_START_BIT_PAUSE_TIME 1026.0e-6 // 1026 usec pause (39 x 1/38kHz)
607 #define LEGO_PULSE_TIME 158.0e-6 // 158 usec pulse ( 6 x 1/38kHz)
608 #define LEGO_1_PAUSE_TIME 553.0e-6 // 553 usec pause (21 x 1/38kHz)
609 #define LEGO_0_PAUSE_TIME 263.0e-6 // 263 usec pause (10 x 1/38kHz)
610 #define LEGO_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms
611 #define LEGO_ADDRESS_OFFSET 0 // skip 0 bits
612 #define LEGO_ADDRESS_LEN 0 // read 0 address bits
613 #define LEGO_COMMAND_OFFSET 0 // skip 0 bits
614 #define LEGO_COMMAND_LEN 16 // read 16 bits (12 command + 4 CRC)
615 #define LEGO_COMPLETE_DATA_LEN 16 // complete length
616 #define LEGO_STOP_BIT 1 // has stop bit
617 #define LEGO_LSB 0 // MSB...LSB
618 #define LEGO_FLAGS 0 // flags
620 /*---------------------------------------------------------------------------------------------------------------------------------------------------
622 *---------------------------------------------------------------------------------------------------------------------------------------------------
624 #define THOMSON_PULSE_TIME 550.0e-6 // 550 usec pulse
625 #define THOMSON_1_PAUSE_TIME 4500.0e-6 // 4500 usec pause
626 #define THOMSON_0_PAUSE_TIME 2000.0e-6 // 2000 usec pause
627 #define THOMSON_FRAMES 1 // THOMSON sends 1 frame
628 #define THOMSON_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // repetition after 35ms
629 #define THOMSON_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 35ms
630 #define THOMSON_ADDRESS_OFFSET 0 // skip 0 bits
631 #define THOMSON_ADDRESS_LEN 4 // read 4 address bits
632 #define THOMSON_COMMAND_OFFSET 5 // skip 4 address bits + 1 toggle bit
633 #define THOMSON_COMMAND_LEN 7 // read 7 command bits
634 #define THOMSON_COMPLETE_DATA_LEN 12 // complete length
635 #define THOMSON_STOP_BIT 1 // has stop bit
636 #define THOMSON_LSB 0 // MSB...LSB
637 #define THOMSON_FLAGS 0 // flags
639 /*---------------------------------------------------------------------------------------------------------------------------------------------------
641 *---------------------------------------------------------------------------------------------------------------------------------------------------
643 #define BOSE_START_BIT_PULSE_TIME 1060.0e-6 // 1060 usec pulse
644 #define BOSE_START_BIT_PAUSE_TIME 1425.0e-6 // 1425 usec pause
645 #define BOSE_PULSE_TIME 550.0e-6 // 550 usec pulse
646 #define BOSE_1_PAUSE_TIME 1425.0e-6 // 1425 usec pause
647 #define BOSE_0_PAUSE_TIME 437.0e-6 // 437 usec pause
648 #define BOSE_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms???
649 #define BOSE_ADDRESS_OFFSET 0 // skip 0 bits
650 #define BOSE_ADDRESS_LEN 0 // read 16 address bits
651 #define BOSE_COMMAND_OFFSET 0 // skip 16 bits (8 address + 8 /address)
652 #define BOSE_COMMAND_LEN 16 // read 16 bits (8 command + 8 /command)
653 #define BOSE_COMPLETE_DATA_LEN 16 // complete length
654 #define BOSE_STOP_BIT 1 // has stop bit
655 #define BOSE_LSB 1 // LSB...MSB
656 #define BOSE_FLAGS 0 // flags
658 /*---------------------------------------------------------------------------------------------------------------------------------------------------
660 * In reality A1 TV Box has no start bit with 300/340 usec. There are 2 start bits "10" with 250us pulse + 150us pause + 150us pause + 250us pulse
661 * This is not very easy to detect, because 1st and 2nd pause of both start bits are closely spaced.
662 * So IRMP looks for pseudo start bit with 300/340 usec and ignores the second half of the 2nd bit (250us pulse)
663 * This method only works because the first data bit (which is the 3rd bit) following is always "1":
664 * IRMP treats the first "long" pulse (250us of 2nd start bit + 250us of 1st data bit) of this "1" as a first _short_ pulse.
665 * This is a bug in IRMP's manchester decoder, but a good feature here ;-)
666 *---------------------------------------------------------------------------------------------------------------------------------------------------
668 #define A1TVBOX_START_BIT_PULSE_TIME 300.0e-6 // 300 usec pulse
669 #define A1TVBOX_START_BIT_PAUSE_TIME 340.0e-6 // 340 usec pause
670 #define A1TVBOX_BIT_PULSE_TIME 250.0e-6 // 250 usec pulse
671 #define A1TVBOX_BIT_PAUSE_TIME 150.0e-6 // 150 usec pulse
672 #define A1TVBOX_STOP_BIT 0 // has no stop bit
673 #define A1TVBOX_LSB 0 // MSB...LSB
674 #define A1TVBOX_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1 ) // flags
675 #define A1TVBOX_FRAMES 1 // A1TVBOX sends each frame 1 times
676 #define A1TVBOX_ADDRESS_OFFSET 1 // skip 1 bits
677 #define A1TVBOX_ADDRESS_LEN 8 // read 8 address bits
678 #define A1TVBOX_COMMAND_OFFSET 9 // skip 9 bits (start bit + address)
679 #define A1TVBOX_COMMAND_LEN 8 // read 8 command bits
680 #define A1TVBOX_COMPLETE_DATA_LEN 17 // complete length incl. start bit
681 #define A1TVBOX_FRAME_REPEAT_PAUSE_TIME 50.0e-3 // 50 msec pause between frames, don't know if it is correct
683 /*---------------------------------------------------------------------------------------------------------------------------------------------------
684 * ORTEK (Hama): 6 address bits + 2 frame type bits + 6 command bits + 1 parity bit + 1 unknown bit + "1" + "0"
685 *---------------------------------------------------------------------------------------------------------------------------------------------------
687 #define ORTEK_START_BIT_PULSE_TIME 2000.0e-6 // 2000 usec pulse
688 #define ORTEK_START_BIT_PAUSE_TIME 1000.0e-6 // 1000 usec pause
689 #define ORTEK_BIT_TIME 500.0e-6 // 500 usec pulse/pause
690 #define ORTEK_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
691 #define ORTEK_ADDRESS_OFFSET 0 // skip 0 bits
692 #define ORTEK_ADDRESS_LEN 8 // read 6 address bits + 2 special bits
693 #define ORTEK_COMMAND_OFFSET 8 // skip 6 address bits + 2 special bits
694 #define ORTEK_COMMAND_LEN 6 // read 6 command bits
695 #define ORTEK_COMPLETE_DATA_LEN 18 // complete length
696 #define ORTEK_STOP_BIT 0 // has no stop bit
697 #define ORTEK_LSB 0 // MSB...LSB
698 #define ORTEK_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags
700 /*---------------------------------------------------------------------------------------------------------------------------------------------------
702 *---------------------------------------------------------------------------------------------------------------------------------------------------
704 #define TELEFUNKEN_START_BIT_PULSE_TIME 600.0e-6 // 600 usec pulse
705 #define TELEFUNKEN_START_BIT_PAUSE_TIME 1500.0e-6 // 1500 usec pause
706 #define TELEFUNKEN_PULSE_TIME 600.0e-6 // 600 usec pulse
707 #define TELEFUNKEN_1_PAUSE_TIME 1500.0e-6 // 1500 usec pause
708 #define TELEFUNKEN_0_PAUSE_TIME 600.0e-6 // 600 usec pause
709 #define TELEFUNKEN_FRAME_REPEAT_PAUSE_TIME 22.0e-3 // frame repeat after XX ms ?????
710 #define TELEFUNKEN_ADDRESS_OFFSET 0 // skip 0 bits
711 #define TELEFUNKEN_ADDRESS_LEN 0 // read 0 address bits
712 #define TELEFUNKEN_COMMAND_OFFSET 0 // skip 0 bits
713 #define TELEFUNKEN_COMMAND_LEN 15 // read 15 bits
714 #define TELEFUNKEN_COMPLETE_DATA_LEN 15 // complete length
715 #define TELEFUNKEN_STOP_BIT 1 // has stop bit
716 #define TELEFUNKEN_LSB 0 // LSB...MSB
717 #define TELEFUNKEN_FLAGS 0 // flags
719 /*---------------------------------------------------------------------------------------------------------------------------------------------------
721 *---------------------------------------------------------------------------------------------------------------------------------------------------
723 #define ROOMBA_START_BIT_PULSE_TIME 2790.0e-6 // 2790 usec pulse
724 #define ROOMBA_START_BIT_PAUSE_TIME 930.0e-6 // 930 usec pause
725 #define ROOMBA_0_PULSE_TIME 930.0e-6 // 930 usec pulse
726 #define ROOMBA_1_PULSE_TIME 2790.0e-6 // 2790 usec pulse
727 #define ROOMBA_0_PAUSE_TIME 2790.0e-6 // 2790 usec pause
728 #define ROOMBA_1_PAUSE_TIME 930.0e-6 // 930 usec pause
729 #define ROOMBA_FRAME_REPEAT_PAUSE_TIME 18.0e-3 // frame repeat after 18ms
730 #define ROOMBA_ADDRESS_OFFSET 0 // skip 0 bits
731 #define ROOMBA_ADDRESS_LEN 0 // read 0 address bits
732 #define ROOMBA_COMMAND_OFFSET 0 // skip 0 bits
733 #define ROOMBA_COMMAND_LEN 7 // read 7 bits
734 #define ROOMBA_COMPLETE_DATA_LEN 7 // complete length
735 #define ROOMBA_STOP_BIT 0 // has stop bit
736 #define ROOMBA_LSB 0 // MSB...LSB
737 #define ROOMBA_FLAGS 0 // flags
738 #define ROOMBA_FRAMES 8 // ROOMBA sends 8 frames (this is a lie, but more comfortable)
740 /*---------------------------------------------------------------------------------------------------------------------------------------------------
741 * RC-MM (32, 24, or 12 bit)
742 *---------------------------------------------------------------------------------------------------------------------------------------------------
744 #define RCMM32_START_BIT_PULSE_TIME 500.0e-6 // 500 usec pulse
745 #define RCMM32_START_BIT_PAUSE_TIME 220.0e-6 // 220 usec pause
746 #define RCMM32_PULSE_TIME 230.0e-6 // 230 usec pulse
747 #define RCMM32_00_PAUSE_TIME 220.0e-6 // 220 usec pause
748 #define RCMM32_01_PAUSE_TIME 370.0e-6 // 370 usec pause
749 #define RCMM32_10_PAUSE_TIME 540.0e-6 // 540 usec pause
750 #define RCMM32_11_PAUSE_TIME 720.0e-6 // 720 usec pause
752 #define RCMM32_FRAME_REPEAT_PAUSE_TIME 80.0e-3 // frame repeat after 80 ms
753 #define RCMM32_ADDRESS_OFFSET 0 // skip 0 bits
754 #define RCMM32_ADDRESS_LEN 16 // read 16 address bits
755 #define RCMM32_COMMAND_OFFSET 17 // skip 17 bits
756 #define RCMM32_COMMAND_LEN 15 // read 15 bits
757 #define RCMM32_COMPLETE_DATA_LEN 32 // complete length
758 #define RCMM32_STOP_BIT 1 // has stop bit
759 #define RCMM32_LSB 0 // LSB...MSB
760 #define RCMM32_FLAGS 0 // flags
762 /*---------------------------------------------------------------------------------------------------------------------------------------------------
763 * RADIO1 - e.g. Tevion
764 *---------------------------------------------------------------------------------------------------------------------------------------------------
766 #define RADIO1_START_BIT_PULSE_TIME 3000.0e-6 // 3000 usec pulse
767 #define RADIO1_START_BIT_PAUSE_TIME 7000.0e-6 // 7000 usec pulse
768 #define RADIO1_0_PULSE_TIME 500.0e-6 // 500 usec pulse
769 #define RADIO1_0_PAUSE_TIME 1000.0e-6 // 1000 usec pause
770 #define RADIO1_1_PULSE_TIME 1000.0e-6 // 1000 usec pulse
771 #define RADIO1_1_PAUSE_TIME 500.0e-6 // 500 usec pause
773 #define RADIO1_FRAME_REPEAT_PAUSE_TIME 25.0e-3 // frame repeat after 25ms
774 #define RADIO1_ADDRESS_OFFSET 4 // skip 4 bits
775 #define RADIO1_ADDRESS_LEN 16 // read 16 address bits
776 #define RADIO1_COMMAND_OFFSET 20 // skip 4 + 16 bits
777 #define RADIO1_COMMAND_LEN 3 // read 3 command bits
778 #define RADIO1_COMPLETE_DATA_LEN 23 // complete length
779 #define RADIO1_STOP_BIT 1 // has stop bit
780 #define RADIO1_LSB 1 // LSB...MSB?
781 #define RADIO1_FLAGS 0 // flags
783 /*---------------------------------------------------------------------------------------------------------------------------------------------------
785 *---------------------------------------------------------------------------------------------------------------------------------------------------
787 #define AUTO_FRAME_REPETITION_TIME 80.0e-3 // SIRCS/SAMSUNG32/NUBERT: automatic repetition after 25-50ms
789 #endif // _IRMP_PROTOCOLS_H_