irmpconfig.h

   1 /*---------------------------------------------------------------------------------------------------------------------------------------------------
   2  * irmpconfig.h
   3  *
   4  * Copyright (c) 2010 Frank Meyer - frank(at)fli4l.de
   5  *
   6  * $Id: irmpconfig.h,v 1.39 2010/08/30 15:45:27 fm Exp $
   7  *
   8  * ATMEGA88 @ 8 MHz
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License as published by
  12  * the Free Software Foundation; either version 2 of the License, or
  13  * (at your option) any later version.
  14  *---------------------------------------------------------------------------------------------------------------------------------------------------
  15  */
  16
  17 #ifndef _IRMPCONFIG_H_
  18 #define _IRMPCONFIG_H_
  19
  20 /*---------------------------------------------------------------------------------------------------------------------------------------------------
  21  * Change F_INTERRUPTS if you change the number of interrupts per second,
  22  * Normally, F_INTERRUPTS should be in the range from 10000 to 15000.
  23  * A value above 15000 costs additional program space, absolut maximum value is 20000.
  24  *---------------------------------------------------------------------------------------------------------------------------------------------------
  25  */
  26 #ifndef F_INTERRUPTS
  27 #define F_INTERRUPTS                            10000   // interrupts per second, min: 10000, max: 15000
  28 #endif
  29
  30 /*---------------------------------------------------------------------------------------------------------------------------------------------------
  31  * Change settings from 1 to 0 if you want to disable one or more decoders.
  32  * This saves program space.
  33  *
  34  * 1 enable  decoder
  35  * 0 disable decoder
  36  *
  37  * The standard decoders are enabled per default.
  38  * Some less common protocols are disabled here, you need to enable them manually.
  39  *
  40  * If you want to use FDC or RCCAR simultaneous with RC5 protocol, additional program space is required.
  41  * If you don't need RC5 when using FDC/RCCAR, you should disable RC5.
  42  *---------------------------------------------------------------------------------------------------------------------------------------------------
  43  */
  44
  45 //      Protocol                                Enable  Remarks                 F_INTERRUPTS        Program Space
  46 #define IRMP_SUPPORT_SIRCS_PROTOCOL             1       // Sony SIRCS           >= 10000                 ~100 bytes
  47 #define IRMP_SUPPORT_NEC_PROTOCOL               1       // NEC + APPLE          >= 10000                 ~250 bytes
  48 #define IRMP_SUPPORT_SAMSUNG_PROTOCOL           1       // Samsung + Samsung32  >= 10000                 ~250 bytes
  49 #define IRMP_SUPPORT_MATSUSHITA_PROTOCOL        1       // Matsushita           >= 10000                  ~50 bytes
  50 #define IRMP_SUPPORT_KASEIKYO_PROTOCOL          1       // Kaseikyo             >= 10000                 ~250 bytes
  51 #define IRMP_SUPPORT_DENON_PROTOCOL             1       // DENON                >= 10000                 ~250 bytes
  52 #define IRMP_SUPPORT_JVC_PROTOCOL               1       // JVC                  >= 10000                 ~250 bytes
  53 #define IRMP_SUPPORT_RC5_PROTOCOL               1       // RC5                  >= 10000                 ~250 bytes
  54 #define IRMP_SUPPORT_RC6_PROTOCOL               1       // RC6 & RC6A           >= 10000                 ~200 bytes
  55 #define IRMP_SUPPORT_GRUNDIG_PROTOCOL           1       // Grundig              >= 10000                 ~150 bytes
  56 #define IRMP_SUPPORT_NOKIA_PROTOCOL             1       // Nokia                >= 10000                 ~150 bytes
  57 #define IRMP_SUPPORT_NUBERT_PROTOCOL            1       // NUBERT               >= 10000                  ~50 bytes
  58 #define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL      1       // Bang & Olufsen       >= 10000                 ~200 bytes
  59 #define IRMP_SUPPORT_FDC_PROTOCOL               0       // FDC3402 keyboard     >= 10000 (better 15000)   ~50 bytes (~400 in combination with RC5)
  60 #define IRMP_SUPPORT_RCCAR_PROTOCOL             0       // RC Car               >= 10000 (better 15000)  ~150 bytes (~500 in combination with RC5)
  61 #define IRMP_SUPPORT_SIEMENS_PROTOCOL           0       // Siemens Gigaset      >= 15000                 ~150 bytes
  62 #define IRMP_SUPPORT_RECS80_PROTOCOL            0       // RECS80               >= 20000                  ~50 bytes
  63 #define IRMP_SUPPORT_RECS80EXT_PROTOCOL         0       // RECS80EXT            >= 20000                  ~50 bytes
  64
  65 /*---------------------------------------------------------------------------------------------------------------------------------------------------
  66  * Change hardware pin here:
  67  *---------------------------------------------------------------------------------------------------------------------------------------------------
  68  */
  69 #ifdef PIC_CCS_COMPILER                                 // PIC CCS Compiler:
  70
  71 #define IRMP_PIN                                PIN_B4  // use PB4 as IR input on PIC
  72
  73 #else                                                   // AVR:
  74
  75 #define IRMP_PORT                               PORTB
  76 #define IRMP_DDR                                DDRB
  77 #define IRMP_PIN                                PINB
  78 #define IRMP_BIT                                6       // use PB6 as IR input on AVR
  79
  80 #define input(x)                                ((x) & (1 << IRMP_BIT))
  81 #endif
  82
  83 /*---------------------------------------------------------------------------------------------------------------------------------------------------
  84  * Set IRMP_LOGGING to 1 if want to log data to UART with 9600Bd
  85  *---------------------------------------------------------------------------------------------------------------------------------------------------
  86  */
  87 #ifndef IRMP_LOGGING
  88 #define IRMP_LOGGING                            0       // 1: log IR signal (scan), 0: do not (default)
  89 #endif
  90
  91 #if IRMP_SUPPORT_SIEMENS_PROTOCOL == 1 && F_INTERRUPTS < 15000
  92 #warning F_INTERRUPTS too low, SIEMENS protocol disabled (should be at least 15000)
  93 #undef IRMP_SUPPORT_SIEMENS_PROTOCOL
  94 #define IRMP_SUPPORT_SIEMENS_PROTOCOL           0
  95 #endif
  96
  97 #if IRMP_SUPPORT_RECS80_PROTOCOL == 1 && F_INTERRUPTS < 20000
  98 #warning F_INTERRUPTS too low, RECS80 protocol disabled (should be at least 20000)
  99 #undef IRMP_SUPPORT_RECS80_PROTOCOL
 100 #define IRMP_SUPPORT_RECS80_PROTOCOL            0
 101 #endif
 102
 103 #if IRMP_SUPPORT_RECS80EXT_PROTOCOL == 1 && F_INTERRUPTS < 20000
 104 #warning F_INTERRUPTS too low, RECS80EXT protocol disabled (should be at least 20000)
 105 #undef IRMP_SUPPORT_RECS80EXT_PROTOCOL
 106 #define IRMP_SUPPORT_RECS80EXT_PROTOCOL         0
 107 #endif
 108
 109 #if IRMP_SUPPORT_JVC_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0
 110 #warning JVC protocol needs also NEC protocol, NEC protocol enabled
 111 #undef IRMP_SUPPORT_NEC_PROTOCOL
 112 #define IRMP_SUPPORT_NEC_PROTOCOL               1
 113 #endif
 114
 115 #endif /* _WC_IRMPCONFIG_H_ */