+/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ * irsndconfig.h\r
+ *\r
+ * Copyright (c) 2010 Frank Meyer - frank(at)fli4l.de\r
+ *\r
+ * $Id$\r
+ *\r
+ * ATMEGA88 @ 8 MHz\r
+ *\r
+ * This program is free software; you can redistribute it and/or modify\r
+ * it under the terms of the GNU General Public License as published by\r
+ * the Free Software Foundation; either version 2 of the License, or\r
+ * (at your option) any later version.\r
+ *---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ */\r
+\r
+/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ * Change settings from 1 to 0 if you want to disable one or more encoders.\r
+ * This saves program space.\r
+ * 1 enable decoder\r
+ * 0 disable decoder\r
+ *---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ */\r
+#define IRSND_SUPPORT_SIRCS_PROTOCOL 1 // flag: support SIRCS uses ~150 bytes\r
+#define IRSND_SUPPORT_NEC_PROTOCOL 1 // flag: support NEC + APPLE uses ~100 bytes\r
+#define IRSND_SUPPORT_SAMSUNG_PROTOCOL 1 // flag: support Samsung + Samsung32 uses ~300 bytes\r
+#define IRSND_SUPPORT_MATSUSHITA_PROTOCOL 1 // flag: support Matsushita uses ~150 bytes\r
+#define IRSND_SUPPORT_KASEIKYO_PROTOCOL 0 // flag: support Kaseikyo NOT SUPPORTED YET!\r
+#define IRSND_SUPPORT_RECS80_PROTOCOL 1 // flag: support RECS80 uses ~100 bytes\r
+#define IRSND_SUPPORT_RC5_PROTOCOL 1 // flag: support RC5 uses ~250 bytes\r
+#define IRSND_SUPPORT_DENON_PROTOCOL 1 // flag: support DENON uses ~200 bytes\r
+#define IRSND_SUPPORT_RC6_PROTOCOL 0 // flag: support RC6 NOT SUPPORTED YET!\r
+#define IRSND_SUPPORT_RECS80EXT_PROTOCOL 1 // flag: support RECS80EXT uses ~100 bytes\r
+#define IRSND_SUPPORT_NUBERT_PROTOCOL 1 // flag: support NUBERT uses ~100 bytes\r
+#define IRSND_SUPPORT_BANG_OLUFSEN_PROTOCOL 1 // flag: support Bang&Olufsen uses ~250 bytes\r
+\r
+\r
+/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ * Change hardware pin here:\r
+ *---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ */\r
+#if defined (__AVR_ATmega32__) || defined (__AVR_ATmega644P__)\r
+#define IRSND_PORT PORTD // port D\r
+#define IRSND_DDR DDRD // ddr D\r
+#define IRSND_BIT 7 // OC2A\r
+#else\r
+#define IRSND_PORT PORTB // port B\r
+#define IRSND_DDR DDRB // ddr B\r
+#define IRSND_BIT 3 // OC2A\r
+#endif // __AVR...\r
+\r
+/*---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ * Change F_INTERRUPTS if you change the number of interrupts per second, F_INTERRUPTS should be in the range from 10000 to 15000\r
+ *---------------------------------------------------------------------------------------------------------------------------------------------------\r
+ */\r
+#define F_INTERRUPTS 10000 // interrupts per second\r